Microsoft Sharepoint Designer 2013 encountered an error during setup
I'm trying to install SharePoint Designer 2013 on my system, but I keep getting this error with no other detail. Looking into the SetupExe log file that the event viewer pointed to didn't really identify anything that would point me
to the culprit (or at least nothing I could decipher). I am running Windows 7 (64 bit) and Office 2010 (32 bit). Anyone run into this before?
I am also trying to install SP Designer 2013 (32-bit) on my Windows 7 Pro 64-bit OS with MS Office 2010 32-bit and getting the same error about 30% into the install. I have attempted to uninstall other 3rd party programs and apps for example Citrix
and Skype and still no success. I tried booting up in safe mode and get the same error right at the onset of the install.
Update: Tried a "clean boot" install and that also failed.
Similar Messages
-
Microsoft SharePoint Server 2013 encountered an error during setup
(the html editor over here is a pain you know where - not even bold text is working...)
Every time I try to install SP 2013 SP1 on my WS 2012 R2 Update virtual machine the installer dies.
NOTE: I can reproduce this any time. Both the SharePoint 2013 (including SP1) .iso as well as the WS 2012 R2 (including Update) .iso are fresh copies out of the MSDN library.
The installation fails where the installer tries to install the binaries. No configuration wizard yet. I made sure all the prerequisites are there. The PreRequisitesInstaller.exe reboots the virtual machine several times (twice) and then it is all set.
PS C:\Users\bsom> add-windowsfeature net-wcf-http-activation45, net-wcf-tcp-activation45,net-wcf-pipe-activation45
Success Restart Needed Exit Code Feature Result
True No NoChangeNeeded {}
PS C:\Users\rsom> Add-WindowsFeature Net-Framework-Features,Web-Server,Web-WebServer,Web-Common-Http,Web-Static-Content,
Web-Default-Doc,Web-Dir-Browsing,Web-Http-Errors,Web-App-Dev,Web-Asp-Net,Web-Net-Ext,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-
Health,Web-Http-Logging,Web-Log-Libraries,Web-Request-Monitor,Web-Http-Tracing,Web-Security,Web-Basic-Auth,Web-Windows-A
uth,Web-Filtering,Web-Digest-Auth,Web-Performance,Web-Stat-Compression,Web-Dyn-Compression,Web-Mgmt-Tools,Web-Mgmt-Conso
le,Web-Mgmt-Compat,Web-Metabase,Application-Server,AS-Web-Support,AS-TCP-Port-Sharing,AS-WAS-Support, AS-HTTP-Activation
,AS-TCP-Activation,AS-Named-Pipes,AS-Net-Framework,WAS,WAS-Process-Model,WAS-NET-Environment,WAS-Config-APIs,Web-Lgcy-Sc
ripting,Windows-Identity-Foundation,Server-Media-Foundation,Xps-Viewer
Success Restart Needed Exit Code Feature Result
True No NoChangeNeeded {}
PS C:\Users\bsom>
UPDATE: I had a quick look at %Temp%\SharePoint Server Setup(20140513...).log
2014/05/13 20:30:40:858::[2344] Log level changed from: Verbose to: Standard
2014/05/13 20:30:40:858::[2344] Error: Failed to install product: D:\global\oserver.MSI ErrorCode: 1603(0x643).
2014/05/13 20:30:40:858::[2344] Log level changed from: Standard to: Verbose
2014/05/13 20:30:40:858::[2344] Rolling back chain
Any ideas?
UPDATE: Installing office prior to the sharepoint installation had no effect (solution was suggested here).
UPDATE: Installing all windows updates (for Windows Server and Office client applications) didn't help either... same error.
UPDATE: I made sure my windows server and sharepoint server images are exactly those you can currently find on MSDN. SHA1 hashes match.I just did a Server 2012 R2 and SP 2013 w/ SP1 install the other night on Hyper-V running on 8.1 Pro without issues. ISO was from MSDN.
Have you run a crc (or md5, forget what is used) to validate the ISO matches what MSDN says it should be?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Hi,
I got the below error while installing share point 2010 on Windows 7 OS.
Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.
Trouble shooted by following link as below
http://christopherborman.blogspot.in/2013/01/installing-sharepoint-2010-on-windows-7.html
But still i am facing the same issue.Please share your inputs to cross this issue.
Regards,
Sudheer
Thanks & Regards, SudheerHi,
I selected Server Farm Mode,stand alone.
Post that installation went fine.
Regards,
Sudheer
Thanks & Regards, Sudheer -
Dear
I need yourhelp, I am installing Sharepoint foundation 2010 prerequisites OK,
then to finish the installation get the following message"microsoft
sharepoint foundation 2010 Encountered an error during setup. One or more required components failed to Office complete successfully"
Operating System: Windows Server 2012R2
Prerequisites: OK
SharepointFoundation 2010sp2
Many thanksforyour help
part of LOG:
01/16/2015 00:37:11 1 INF Searching for registry key Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\CentralAdministrationURL
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF The RegistryHelper has the key name as Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS and the registry hive as LocalMachine
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF The central admin registry name CentralAdministrationURL at HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS could not be found. This means that either
the server is not joined to a farm or a central admin site has not been created in the farm yet.
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is CantOpenCentralAdminSiteNotExists for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id CantOpenCentralAdminSiteNotExists is Cannot browse to the SharePoint Central Administration Web Application because a SharePoint Central Administration Web
Application has not been created yet. To create one, use the SharePoint Products Configuration Wizard. Do you want to launch the configuration wizard now?
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Entering function PsconfigMessageBox.ShowMessageBox
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is Branding for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id Branding is SharePoint Products Configuration Wizard
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:23 1 INF Leaving function UserInterface.ShowCentralAdmin
01/16/2015 00:37:23 1 INF Leaving function UserInterface.WarmUp
01/16/2015 00:37:23 1 INF Entering function TaskDriver.Stop
01/16/2015 00:37:23 1 INF Entering function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop,
01/16/2015 00:37:23 1 INF Entering function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Acquiring the writer lock to change the state
01/16/2015 00:37:23 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
01/16/2015 00:37:23 1 INF Changed state of the task driver to neverrun
01/16/2015 00:37:23 1 INF Released the writer lock to change the state
01/16/2015 00:37:23 1 INF Leaving function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Entering function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message
01/16/2015 00:37:23 1 INF There isn't a current visible user form or the current form is not handling events, so we will handle this task driver event
01/16/2015 00:37:23 1 INF Leaving function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.Stop
01/16/2015 00:37:23 1 INF UnLocking the task driver for exclusive use while warming the driver up
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.WarmUp
01/16/2015 00:37:23 1 INF Entering function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF The psconfig ui application is closing
01/16/2015 00:37:23 1 INF We have do not have a main form, thus the application has been told to close prior to showing the ui at all
01/16/2015 00:37:23 1 INF Leaving function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF Return code indicates a success
01/16/2015 00:37:23 1 INF Leaving function PsconfigUserInterfaceMain.MainHi Jose,
When server 2012 will not allow pre-requisite to run, due to the ASP.NET 3.5 or 4.5, do this:
Run, from admin command prompt:
Dism /online /enable-feature /featurename:NetFx3 /All /Source:<drive>:\sources\sxs /LimitAccess
you can read more here:
http://www.sharepointpapa.com/blog/_layouts/15/start.aspx#/Lists/Posts/Post.aspx?ID=86
Stacy www.sharepointpapa.com -
Microsoft office professional 2013 encountered an error during setup
Trying to install the 32 bit version of Office 2013. Planning to keep all my old versions. I have Access 2002 and 2003 that I need. Was not installing Outlook 2013 as Outlook 2010 is the only Office app that I care if I have issues with
and my IT dept controls a a bit more. Getting the error "microsoft office professional 2013 encountered an error during setup" with no other info. I have Windows 7, full admin rights, and closed all other Office apps. I Just did a restart
which also installed all current Windows patches. Got the same error.
Any ideas or where to look for the cause?I am having the same problem and am dead in the water.
Just in case one of the suggestions might have worked, I went through all of those above with no luck. At first the issue was that the preview version of the OSE was left behind by the uninstall, but I replaced it with the 2010 version, no dice.
I then uninstalled all office products to get the OSE uninstalled, and setup now gets beyond that hangup, but still fails. Following is the section of the log with the errors (MS email me for the full log):
2012/11/07 15:38:25:897::[5980] MSI(ACTIONSTART): 'Action 15:38:25: PublishProduct. Publishing product information'
2012/11/07 15:38:25:897::[5980] MSI(INFO): 'Action start 15:38:25: PublishProduct.'
2012/11/07 15:38:25:901::[5980] MSI(INFO): 'Action ended 15:38:25: PublishProduct. Return value 1.'
2012/11/07 15:38:25:901::[5980] MSI(ACTIONSTART): 'Action 15:38:25: InstallExecute. '
2012/11/07 15:38:25:901::[5980] MSI(INFO): 'Action start 15:38:25: InstallExecute.'
2012/11/07 15:38:25:921::[5980] MSI(COMMONDATA): 'Message type: 0, Argument: 1033'
2012/11/07 15:38:25:921::[5980] MSI(COMMONDATA): 'Message type: 1, Argument: Microsoft Office Shared 64-bit MUI (English) 2013'
2012/11/07 15:38:25:922::[5980] MSI(ACTIONSTART): 'Action 15:38:25: AllocateRegistrySpace. Allocating registry space'
2012/11/07 15:38:25:923::[5980] MSI(ACTIONSTART): 'Action 15:38:25: ProcessComponents. Updating component registration'
2012/11/07 15:38:25:934::[5980] MSI(ACTIONSTART): 'Action 15:38:25: CAOSMRegisterLogonTaskRollback.x64.1033. '
2012/11/07 15:38:25:935::[5980] MSI(ACTIONSTART): 'Action 15:38:25: CAOSMRegisterFallBackTaskRollback.x64.1033. '
2012/11/07 15:38:25:937::[5980] MSI(ACTIONSTART): 'Action 15:38:25: RemoveODBC. Removing ODBC components'
2012/11/07 15:38:25:937::[5980] MSI(ACTIONSTART): 'Action 15:38:25: InstallFiles. Copying new files'
2012/11/07 15:38:26:142::[5980] MSI(ACTIONSTART): 'Action 15:38:26: CAOSMRegisterLogonTask.x64.1033. '
2012/11/07 15:38:26:247::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:247::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:248::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:249::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:250::[5980] MSI(INFO): 'CustomAction CAOSMRegisterLogonTask.x64.1033 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)'
2012/11/07 15:38:26:253::[5980] MSI(INFO): 'Action ended 15:38:26: InstallExecute. Return value 3.'
2012/11/07 15:38:26:322::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 0'
2012/11/07 15:38:26:323::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 0'
2012/11/07 15:38:26:324::[5980] MSI(COMMONDATA): 'Message type: 0, Argument: 1033'
2012/11/07 15:38:26:324::[5980] MSI(COMMONDATA): 'Message type: 1, Argument: Microsoft Office Shared 64-bit MUI (English) 2013'
2012/11/07 15:38:26:325::[5980] MSI(ACTIONSTART): 'Action 15:38:26: Rollback. Rolling back action:'
2012/11/07 15:38:26:325::[5980] Log level changed from: Standard to: Verbose
2012/11/07 15:38:26:465::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:466::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:467::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:468::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:469::[5980] MSI(INFO): 'CustomAction CAOSMRegisterFallBackTaskRollback.x64.1033 returned actual error code 1603 but will be translated to success due to continue marking'
2012/11/07 15:38:26:524::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:525::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:526::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:527::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:527::[5980] MSI(INFO): 'CustomAction CAOSMRegisterLogonTaskRollback.x64.1033 returned actual error code 1603 but will be translated to success due to continue marking'
2012/11/07 15:38:26:537::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 1'
2012/11/07 15:38:26:542::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 1'
2012/11/07 15:38:26:546::[5980] MSI(INFO): 'Action ended 15:38:26: INSTALL. Return value 3.'
-Ingram -
Microsoft office 2013 encountered an error during setup in Window 8.1
Initially, I got microsoft office 2013 64bit standard version installed in window 8.1. However, it suddenly got errors when opening office, and closed the program automatically. Therefore, I uninstalled it, and tried to re-install office.
However, I got the error "microsoft office 2013 encountered an error during setup" everytime when I try to install it.
I tried 32-bit and 64 bit version, and tried to install in clean boot, deleted registry, and modified the folder name "Microsoft Help", but none of them works.Make sure you completely uninstall previous versions of Office. There may be remnants left behind, even after you uninstall Office using the normal procedure. I recommend using the “Fix It” utility to uninstall Office 2013 completely. Please refer to this
article: http://support.microsoft.com/kb/2739501/en-us you might also follow the manual steps provided on the same page.
If you still having problems, re-registering the Windows Installer and checking permissions on the %TEMP% folder and the C:\Windows\Installer folder to make sure you have full-control. To re-register the Windows Installer run the following commands:
msiexec /unregister
msiexec /register -
"Microsoft Office Professional Plus 2013 encountered an error during setup."
"Microsoft Office Professional Plus 2013 encountered an error during setup."
Can anyone help me?Hi,
Please first make sure you have completely uninstalled previous installed version of Office. We can use Fix it tool in the following KB article:
http://support.microsoft.com/kb/971179/en-us
http://support.microsoft.com/kb/2739501/en-us
Also try to disable all your security programs when you try installing Microsoft Office.
In addition, please check the following link and try the method descrbed to check if it helps:
http://www.rushinformation.com/microsoft-office-professional-plus-2013-encountered-an-error-during-setup-fixed/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support -
Microsoft LYNC Basic 2013 encountered an error suring Setup
Dear Team,
I have tried most of the suggestions provided on net.
I have followed below steps as of now.
1) Uninstall earlier version of LYNC.
2) Deleted registry, & rebooted the system.
3) Logged in with Administrator.
Still I'm facing issues while installing Lync Basic 2013.
Please note that I'm trying to install LYNC Basic 2013 on Windows 7 SP1 & Windows 8 systems.
Thanks & Regards,
Akshay Jadhav
IT Team - Wipro
Serivce Rendered at Shoppers Stop Ltd.
9833347767verify that you install correct version { for example of your office is 64 bit, Lync basic must be 64 bit} , Lync Basic 2013 is available on the Microsoft Download Center and comes in two versions:
Microsoft Lync Basic 2013 (64 Bit)
Microsoft Lync Basic 2013 (32 Bit)
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Microsoft Office 2010 encountered an error during setup: With No error codes/
Hello Everybody.
I am trying to deploy Office 2010 on a windows 7 Machine.. This machine has more then what it needs for hardware to run the software so I know it is not hardware related. At the end of the Install the installers hestiates and begins rolling back and finally
providing "Microsoft Office 2010 encountered an error during setup:" but does not provide any error codes what so ever.
I have tried upgrading, Fresh installs, side by side installs, Safe mode, Clean boot, Local admin accounts and other domain accounts. I have also tried numerous so called "fixes" but still get nothing. Sadly after the 2010 install fails 2007 no longer works
so each attempt is abit time consuming. Any Ideas out there that might solve issue ?Hi,
First try uninstalling all your Addins include connector to test the result.
If not help, try the following steps:
1) Create a new administrator account.
2) Log on and launch the installer.
If things don't quite work perfectly now:
3) If you receive errors accessing your ProgramData folder, use the TakeOwnership registry hack to take control of the entire ProgramData folder, and if needed, create a "Microsoft Office"
folder with "Microsoft Office 2010 Tools" inside it under %programdata%\Microsoft\Windows\Start Menu.
4) Your error may return at the end of the installation, but don't worry, it's finished and Office is now installed. Switch user (don't log off!) and go back to your own user. Double-check
that everything works. Now, to turn off your computer, press and hold the power button for five seconds. This will force the computer to shut down instantly, which will close the installer with the error without giving it the opportunity to roll back its changes.
Sincerely,
Harry -
SharePoint Designer 2013 does not load working workflows in design view
Hello,
I would like to share with you a strange thing that happens to me with Sharepoint Designer 2013.
I designed two list workflows with SPD 2013 for a Sharepoint Online platform.
Both workflows works in the engine as designed, but sometimes happens that in SPD they just don't open in the designer view, even if they do not give errors in the execution view
The error message is that Sharepoint Designer has encountered an error and needs to be restarted. (Obviously restarting does not solve).
Sometimes happens also that the workflows opens but blank, with no steps.
Since this is an online platform, I can't consult logs.
I am thinking to open a ticket with Microsoft, but I would like also to ask to the community if someone encountered this and can suggest a way to troubleshoot what happened and why.
Thanks!Hi,
According to your description, my understanding is that the workflow cannot be opened in SharePoint Designer and sometimes it opened with no steps.
Did this issue occur with other workflows and did it occur often with the same workflow?
I recommend to uninstall SharePoint Designer, delete all the files in the three locations below:
C:\Users\<username>\AppData\Local\Microsoft\WebsiteCache
C:\Users\<username>\AppData\Roaming\Microsoft\SharePoint Designer\ProxyAssemblyCache
C:\Users\<username>\AppData\Roaming\Microsoft\Web Server Extensions\Cache
After that reboot the client and re-install SharePoint Designer 2013 with the latest updates packaged to see if the issue still occurs.
If the issue still occurs with the same workflow, it may be caused by a known issue or by manual manipulation of the XAML in
SharePoint Designer 2013 that can
corrupt the workflow, then we need to recreate the workflow.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Sharepoint online & Sharepoint Designer 2013
Hi, I am receiving an error each time I try to open a SharePoint online site through SharePoint designer 2013.
The error is saying "The Server Could not complete your request". I click on 'Details' and get a repeated "403 Forbidden403 Forbidden403 Forbidden" error message. After I pass this message I get a standard "You do not have permission
to open this web site in SharePoint designer"
Here are a list of things that have so far not worked for me:
Using "https://" rather than "http://" - Same issue.
Removing SharePoint Designer, deleting cache in "users>Roaming>SharePoint designer cache" - Same issue.
Clearing Generic Credentials in Credential Manager - Same issue.
Checking SharePoint site permissions to ensure that " Same issue.
My Admin role grants no restrictions.
I have Nintex trials installed and have used it to build forms on the site, I also have Nintex workflow however current tutorials detailing how to do what I need to do require SharePoint Designer 2013.
Finally SharePoint Developer 2013 has opened sites before, both SharePoint online sites and on prem, but now our company has gone in for the 'real deal' site I can not open this in SharePoint Designer 2013.
Any support would be very much appreciated, I have been trying to find a solution for a number of days now going into a week.
Regards,
AndrewHi Andrew,
What permission do you have at site collection level and site level?
For troubleshooting your issue, please go to your site collection -> site settings -> site collection administration -> SharePoint Designer Settings, make sure you enable the SharePoint Designer.
Also make sure the o365 sites are added to the trusted sites and the WebClient services (Search: services.msc) is running.Then in SPD go to Account > Switch Account and type in the credentials of the site you are trying to open (it defaults to your
Microsoft Login).
Reference:
http://community.office365.com/en-us/f/154/t/184387.aspx
https://social.technet.microsoft.com/Forums/en-US/15fd1436-3166-4e43-8b22-cdb480091548/cant-open-sharepoint-online-site-in-sharepoint-designer-2013?forum=sharepointcustomization
Best Regards,
Eric
Eric Tao
TechNet Community Support -
SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath MaliHi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Error while saving list workflow in sharepoint designer 2013
Hi,
I am trying to create custom workflow using sharepoint workflow 2013 at client side.While i am saving this,it thowas error-"Server side activities have been updated.you need to restart sharepoint designer to use the updated version
of activites"
I have installed 32-bit sharepoint designer 2013 in my system and i have no access to server.
I have also followed the solution and deleted the contents in the below location.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
Please help to solve the error.
Thank youYou need to install updated version of SharePoint designer.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f255f4b4-1828-4ccb-983a-5efbf0e020ae/sharepoint-designer-2013-server-side-activties-have-been-updated-prompt?forum=sharepointcustomization
Try below:
http://stackoverflow.com/questions/19652391/error-while-saving-a-workflow-via-sharepoint-designer-server-side-activities-ha -
I don't know what might be wrong but I have tried everything possible I suppose.
Configuration: 1 App Server SharePoint Standard 2013 + SQL Server. On App Server, I have installed Workflow Manager as well.
Installed Sharepoint Designer 2013 on my laptop.
Before I was able to publish the workflows, but now it refuses, thwroing me the following error:
System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.WorkflowCommunicationException: The request was aborted: The request was canceled. Client ActivityId : ac85cf9c-053a-e0db-1f47-608050559d31. ---> System.Net.WebException:
The request was aborted: The request was canceled. ---> System.ServiceModel.CommunicationException: There was an error reading from the pipe: The pipe has been ended. (109, 0x6d). ---> System.IO.PipeException: There was an error reading from
What I have tried so far:
a. Re-installed Workflow, Service Bus, Windows Fabric, Sharepoint Designer... no luck
b. Run the configuration script... -Force enabled... no luck
c. Remove WF Manager, SB, etc... Deleted all WF and sb Databases from SQL, and re-installed all icluding updates... no luck
d. Tried to run services using Farm account, still no luck.
e. All services on the Server are running as well
f. The workflow is checked that it is associated with the site collection.
I don't know what else to try... seems like I am experiencing unique issue here... please help!One last thing I can suggest - In case if you have installed CU Update for WF manager 1.0 and service bus. Some time that creates problem, [Please take backup before make any changes] -
- Clear everything, WF config , SharePoint WF setting, un register WF from SP , You can delete and recreate WF service Apps
- IISreset at WF and SP server
- Uninstall CU update for Workflow manager 1.0 and Service Bus from WF server [Control Panel - Programs - Update], you can delete all update installed
- ReStart WF server
- Reconfigure WF manager , Test WF sites , should return XML
Get-WFFarm | ft HttpPort
- Reconfigure WF at SP , Make sure should have enough free memory
Register-SPWorkflowService –SPSite "http://SPsite/" –WorkflowHostUri "http://WFServer:12291" –AllowOAuthHttp
http or https , depend on your configuration
And retest from SPD again.
Good luck:)
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful. -
Hi,
I have few sharepoint 2013 site's, which I am trying to open in sharepoint designer 2013.
After adding the site name in open site and clicking ok, the sharepoint designer crashes. At times the sites open, but 90% of the time, the sharepoint 2013 designer has crashed. I get the message "The server could not complete the request. For
more specific information, click on the Details button".
When clicking on "Details" button, there is a empty box. The error message never gets closed and have to kill the process.
I have tried doing "IISreset" multiple times, which has not helped.
Has anybody faced this issue? How to fix this?
ThanksHi Venkatzeus,
Firstly, I need to verify the followings:
1.Whether this issue occurred on a specify SharePoint 2013 site.
2.Whether you have extended the problematic site.
Make sure that your user is a site administrator. If you have extended the problematic site, please add it to AAM.
There are other probable causes for this issue:
1.Anonymous authentication is not configured for the problematic web application in IIS
Fix: Enable Anonymous authentication in IIS
2.Server is running out of memory
Fix: Free up memory on the server
Here are some similar articles for you to take a look at :
http://forums.bitwiseglobal.com/forum/sharepoint/the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-button/
http://tjendarta.wordpress.com/2013/05/24/fix-sharepoint-designer-2013-the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-below/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/11854880-e85d-4e4c-ae9c-0ffd640d33d8/error-the-server-could-not-complete-your-request-while-opening-site-in-sharepoint-designer?forum=sharepointadminprevious
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f93e155e-2c65-4744-a1d0-96cdbd50014d/sharepoint-designer-error-the-server-could-not-complete-your-request
I hope this helps.
Thanks,
Wendy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
My iPad reminder no longer works. Please help.
There is no button for lists, like my iPhone. I have a calendar but cannot type any reminder on it. I tried Siri, but her reply ended with her being sorry that she is unable to create a reminder..
-
Me_process_po_cust
Hi Guys, I have a question, i have added a field in a user and i want to save it in the purchase order. I thought that the badi that i have to implement is the me_process_pos_cust, but when i try to locate it putting a break point in the method get_i
-
Instead of downloading BIRDS OF STEAL ... I tunes download PROJECT X.. ... I payed 4.99
-
I have loaded a couple of TV show seasons on my iPod Classic. The display shows the series name and underneath shows Unknown Release Date. I would like it to show the Episode Title in lieu of Unknown Release Date. Does anyone know if this can be done
-
Please help! Can't make commas (thousands separator) appear in numbers
I open Pages. I type in a number (123456). While cell is still selected, I open Inspector and select Cell Format = Number. I then check the Thousands Separator checkbox. It does NOT put commas in my number. Any help greatly appreciated!