Microsoft Silverlight doesn't want to work on my Macbook Pro.

I'm trying to watch stuff on Netflix, but I keep getting an Error Code: 2103. It says to uninstall then reinstall Silverlight, I do that and it still comes up. I've read the steps and I've done it multiple times and I still can't watch anything. I need help. It's been doing this since I downloaded Silverlight.

coxorangepippin wrote:
The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
What that means is that is can't be used with Lion 10.7. PowerPC was the chip Apple used up until 2006 when they switched to Intel. At that point, they created the Rosetta emulator to allow for PPC support for 5 years. They finally dropped the support with the release of Lion. It will only work with OS X 10.6 or earlier. The other option is to purchase a new GPS, which can be had for $100 for a decent one.

Similar Messages

Samsung SyncMaster P2770HD doesn't want to work with new MacBook Air

I have a (pre-unibody) MacBook Pro and a Samsung SyncMaster P2770HD. I just picked up a MacBook Air with a MiniDisplay Port to DVI adapter. The monitor works fine with my older Pro but when I connect using the adapter to my Air, the monitor doesn't work. The monitor momentarily lights up and complains that it's not receiving a signal.
Any ideas?
Thanks in advance!
Dan

Hello there - did you end up ever solving this one?
I have a 13" MacBook Air (2011), using a mini display port to HDMI with a P2770HD, and I just cannot get the air to detect the display, or vice versa.

My new TomTom doesn't seem to work with my MacBook Pro (OS version 10.7.2). Is there any way I can make it work?

The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro? Does Apple want to drive us into using PCs or what is going on? Is there a driver or some other clever means of making the TomTom work as they used to work with Macs? This is an urgent question - please help if you can! Thanks. Bill

coxorangepippin wrote:
The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
What that means is that is can't be used with Lion 10.7. PowerPC was the chip Apple used up until 2006 when they switched to Intel. At that point, they created the Rosetta emulator to allow for PPC support for 5 years. They finally dropped the support with the release of Lion. It will only work with OS X 10.6 or earlier. The other option is to purchase a new GPS, which can be had for $100 for a decent one.

When I click on the 'help' key in the elements 12 program it wants to open it in Firefox2. Firefox doesn't work on my Macbook Pro Air. I use Safari. How do I get it to open?

When I click on the 'help' key in the elements 12 program it wants to open it in Firefox2. Firefox doesn't work on my Macbook Pro Air. I use Safari. How do I get it to open?

Hmm, that is very strange. I agree with MichelB that it's probably best just to get the PDF, but you can try going to your username>library>preferences and deleting:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements 12 settings
Adobe Photoshop Elements 12 paths
To see the library, click the Go menu in the Finder and hold down the option key and it will appear below the little house for your user account. While you're in there it wouldn't be a bad idea to go to the Saved Application States folder and delete anything pertaining to PSE.
Repair permissions and see if that does it.

CS3 doesn't want to work any more

Hello,
I have an old version of the creative suite that is all right for what I do (information for a charitable organisation for medical research) installed in 2008. For quite a while now every once in a while when I start up I get a screen asking me to register. But since I already am registered Adobe just said to click on later and go on working. But this morning the screen is empty so I can't click anywhere. I've tried restarting and even turning off the computer and trying to restart my day.
What can I do ? Help !
Thanks.

Thanks a lot. That worked for me too. I was afraid that CS3 had changed into
a pumpkin this morning.
virginie
Le 22/11/13 13:25, « De Mostertman » <[email protected]> a écrit :
Re: CS3 doesn't want to work any more
created by De Mostertman <http://forums.adobe.com/people/De+Mostertman> in
Photoshop General Discussion - View the full discussion
<http://forums.adobe.com/message/5865197#5865197>
I had my CS3 freezing this morning on startup. I hope you didn't reinstall or
anything bacause the sollution is quite simple: What helped me was restarting
Photoshop with the internet cable pulled out. Apperently it was freezing on
the registerscreen, and by removing the internet cable I surpassed that
screen, to see another screen.after that i could start it up again with the
internet cable plugged in again.
Please note that the Adobe Forums do not accept email attachments. If you want
to embed a screen image in your message please visit the thread in the forum
to embed the image at http://forums.adobe.com/message/5865197#5865197 Replies
to this message go to everyone subscribed to this thread, not directly to the
person who posted the message. To post a reply, either reply to this email or
visit the message page: http://forums.adobe.com/message/5865197#5865197 To
unsubscribe from this thread, please visit the message page at
http://forums.adobe.com/message/5865197#5865197. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Photoshop General Discussion at Adobe Community
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerTy
pe=14&container=4694> For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying this page

Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying to visit apple support. Please help me, I don´t want to loose my ipod.

Hi thenicegirl07,
It sounds like your Click Wheel iPod is showing a sad iPod icon. If it will go into Disk Mode you may be able to restore it, take a look at the article and quote below for more information about the alert and possible resolutions.
iPod displays a sad iPod icon
http://support.apple.com/kb/ts1373
Resolution
In most cases, the sad iPod icon indicates a hardware issue. If you are able to force iPod into Disk Mode, then it may not be a hardware issue, and you should try to restore your iPod with the latest software.
If you cannot force your iPod into disk mode and restore it, then your iPod is in need of service. Set up an iPod Service Request or make a reservation at the Genius Bar before visiting your local Apple Retail Store. To make a reservation:
Go to http://www.apple.com/retail/storelist/.
Choose an Apple Store location.
Click the Reserve link under Genius Bar.
Choose iPod.
Select your desired reservation date and time.
For an easy to follow QuickTime movie, view the Troubleshooting & Extras section of the iPod Tutorials atwww.apple.com/support/ipod/tutorial.
Additional Information
iPod displays a folder icon with an exclamation point
-Jason

My iPad air charger doesn't want to work

After less than 7 months from buying my iPad air, my charger doesn't want to work, my iPad is not chargin. Do I need to buy a new one?

No, you need to get the charger replaced under warranty.

HT4623 i was updating my iphone 4g then i stoped in the middle of the update now my phone was crazy it doesn't want to work again what should i do

i was updating my iphone 4g then i stoped in the middle of the update now my phone was crazy it doesn't want to work again what should i do

Google "iPhone DFU Mode". Put the phone in DFU mode and restore it.

TS2771 my itouch 4th gen internal speaker doesn't want to work. what can i do to fix it? help please!

my itouch 4th gen internal speaker doesn't want to work. what can i do to fix it? help please!

- Try inserting/removing a earphone plug a dozen or more times.
- Reset the iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Could be a bad headphone jack.

At the moment I can use my apple Id on my iPod touch to connect to iCloud and IMessage and FaceTime but it doesn't work on App Store. Face to an error: can not connect to iTunes Store. What's wrong? My apple Id is working on my MacBook Pro as well.

At the moment I can use my apple Id on my iPod touch to connect to iCloud and IMessage and FaceTime but it doesn't work on App Store & iTunes just on iPod Face to an error: can not connect to iTunes Store. (Setting... itunes & app store)What's wrong? My apple Id is working on my MacBook Pro as well. And it was working on this iPod before resetting . Just after resetting I can not connect to App Store & iTunes and I can not instal any app even free apps

Try
Can't connect to the iTunes Store

I have an 11" MacBook Air. When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer. Is there another way to get the computer to recognize the adapter? (It works with my MacBook Pro)

I have an 11" MacBook Air. When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer. Is there another way to get the computer to recognize the adapter? (It works with my MacBook Pro)

Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
-USB-to-VGA
http://www.cablestogo.com/product/30545
-Convert s-video or composite video signals to high resolution VGA
http://www.cablestogo.com/product/40971
The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
el7

I want to factory reset my macbook pro but my computer doesn't give me the recovery option, it gives me Macintosh HD only.

I want to factory reset my macbook pro but my computer doesn't give me the recovery option, it gives me Macintosh HD only.

Hello sallay Amir,
Thanks for participating in the Apple Support Communities.
It sounds like you would like to erase your MacBook Pro and install a new copy of OS X, but the Mac does not boot to OS X Recovery when you hold the Command + R keys during startup.
If your Mac came with OS X Snow Leopard (10.6) or earlier, I recommend referring to the steps in this article:
Mac OS X v10.6 Snow Leopard: How to Erase and Install - Apple Support
For a newer Mac (OS X Lion, Mountain Lion, Mavericks or Yosemite), try reinstalling OS X by using Internet Recovery, as described in the "OS X Internet Recovery" section on this page:
OS X: About OS X Recovery - Apple Support
All the best,
Jeremy

Is there a driver to let a ps2 keyboard plugged in with a usb connector work on my macbook pro 13inch

is there a driver to let a ps2 keyboard plugged in with a usb connector work on my macbook pro 13inch?
I know there are more threads about this subject but none was really an answer.
I got a keyboard (brand medion) with a ps2 connector. i wanted it to connect to my macbook so i bought an ps2 to usb connecter.
wile connected with my macbook the keyboard leds flash one time like they do when you put it in a ps2. but after this just doesn' t work
I think i might miss a driver or its just turned of somwhere in the system. an previous answer was said something about a safe reboot and a lot of codes but thats to hard for me.
so any good solutions????

I've never found a PS2 to USB adapter that worked, or IIRC I've never found one at all. I have USB TO PS2 but not the other way. Just go out and buy a new keyboard. PS2 is so late 90s/early 2000s

Will a Mini-Displayport to VGA adapter work with new macbook pro 2011

I was thinking of getting a mini-displayport to vga adapter for my external monitor I wanted to hook up but I wasnt quite sure whether it would work as my macbook pro has the new thunderbolt port, I was confused if the new port would only work with the thunderbolt displays. Could anyone help me as I'm not too sure what will work.

I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

Microsoft Silverlight doesn't want to work on my Macbook Pro.

Similar Messages

Maybe you are looking for