Microsoft Standard 2010 setup has stopped working

Uninstalled Office Standard 2013.
I downloaded ISO Microsoft Office Standard 2010 from Volume license site, and burned to a dvd, launched the dvd and was able to get to the screen "click" to install office. I clicked the button and
The progress bar launched, but after a couple of minutes the application stopped closed, and the message "Microsoft Office has stopped working" was displayed.
I have run "Fix It" but still the same result.

Please Save the Fix it tool locally and then use it. Clicking "Run" directly won't work.
I would suggest you to follow the manual steps listed in follow article for uninstalling Office 2013, not only run Fix It tool:
http://support.microsoft.com/kb/2739501/en-us
Please restart your computer after you finish the manual steps, then retry the Office 2010 installation.

Similar Messages

Setup has stopped working

I recently upgraded to Windows 7 and had not problems with Photoshop after doing so. Last week I installed a new monitor and discovered the
tools were so small I had a hard time seeing them. I also noticed the cursor had 3 little things on it. I decided to uninstall and reinstall Photoshop CS4 Extended. When doing so, I get a message, Setup Has Stopped Working. I am installing from the DVD and when that didn't work I downloaded from the Adobe site. Still have the same problem. I have even tried installing as administrator.
Can someone please help..
I have been on hold with Adobe for almost an hour trying to get help.
Thank you in advance
Judy

If you have adobe reader installed remove it. For some reason it sometimes does not play well while PS CS4 is installing.
Look in Task manager and if you have other adobe products installed make sure they are not running.
Look in msconfig and turn off any items that do not need to be running during computer start up.
Run this CS4 cleaner utility. you will have a choice of level 1 or 2. Type in 3 and run it.
http://www.adobe.com/support/contact/cs4clean.html
Run the windows installer clean up
http://support.microsoft.com/kb/290301
Run defrag before and after install.
Turn off windwos defender, any anti-virus running and ensure your connected to the internet before install starts.
When you put the disk in the drive and it wants to run, don't run it. Close out and go to computer and right click on the DVD drive and explore. There is a CS4 folder so open that and find the .exe folder. Right click on that folder and chose run as admin.
The set up will start and will take a few to run its course. During the install the bar will look like it is hanging around 90 percent. This is normal so let it finish. May hang for 5 to 10 mins.
After install is finished remove disk and reboot.
Now the first time you run PS CS4 you need to run as Admin. Right click on the icon in the start area. Choose properties, Compatibility and check run as Admin and close out. Then click on PS to start and then update.

Google update setup has stopped working when installing voiceandvideo

when trying to install voiceandvideosetup.exe the following message appears "google update setup has stopped working"
Can anybody help me for i need to get my webcam working asap

If you have adobe reader installed remove it. For some reason it sometimes does not play well while PS CS4 is installing.
Look in Task manager and if you have other adobe products installed make sure they are not running.
Look in msconfig and turn off any items that do not need to be running during computer start up.
Run this CS4 cleaner utility. you will have a choice of level 1 or 2. Type in 3 and run it.
http://www.adobe.com/support/contact/cs4clean.html
Run the windows installer clean up
http://support.microsoft.com/kb/290301
Run defrag before and after install.
Turn off windwos defender, any anti-virus running and ensure your connected to the internet before install starts.
When you put the disk in the drive and it wants to run, don't run it. Close out and go to computer and right click on the DVD drive and explore. There is a CS4 folder so open that and find the .exe folder. Right click on that folder and chose run as admin.
The set up will start and will take a few to run its course. During the install the bar will look like it is hanging around 90 percent. This is normal so let it finish. May hang for 5 to 10 mins.
After install is finished remove disk and reboot.
Now the first time you run PS CS4 you need to run as Admin. Right click on the icon in the start area. Choose properties, Compatibility and check run as Admin and close out. Then click on PS to start and then update.

Adobe Setup has stopped working

"Adobe Setup has stopped working"
Everytime I try to run Adobe installer or uninstaller the setup crashes!
video example:
http://www.screencast-o-matic.com/watch/cjXUiIntb

I'm having a same problem with Windows 7 Ultimate 64-bit and with Adobe Creative Suite 5.
I tried versions 4, 5.0 and 5.5 - with all same result. Older version 3 did still install still ok. Installation of CS4 or newer immediately halts to a "Adobe Setup had stopped working" error almost immediately after starting actual installation process.
After uninstalling old CS3 version, installing CS5 or 5.5 went little more further but then crashed always when installing "Adobe Player for Embedding". Only Acrobat can be installed since it does apparently install "Adobe Playe for Embedding"
After deleting folder "c:\program file(x86)\common files\adobe\installers" I was able to go even more further, then installation halted at "Adobe ExtendScript Toolkit CS5".
I've tried full uninstall of Creative Suite, using Adobe Creative Suite Cleaner Tool, Ccleaner, CleanMyPC and disabling all services with msconfig - without any success.
Finally I ended up doing Windows 7 Ultimate Update again, which removed the problem.
"Adobe Setup has stopped working" -crash details are
Problem Event Name:    BEX
Application Name:    Setup.exe_Adobe Setup
Application Version:    4.0.50.0
Application Timestamp:    4d68ded0
Fault Module Name:    ARKCmdFS.dll
Fault Module Version:    4.0.50.0
Fault Module Timestamp:    4d68dcf7
Exception Offset:    0003b6ff
Exception Code:    c0000409
Exception Data:    00000000
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    2057
Additional Information 1:    6d93
Additional Information 2:    6d93d8ff327df09c2a70c0fb6a4a4100
Additional Information 3:    b6b5
Additional Information 4:    b6b5f2a1c3efe4dd2a2acac83bc90452

"Adobe Setup has stopped working" problem with XP, not Vista

Adobe has posted a tech note to work around the "Adobe Setup has stopped working" for Vista:
http://kb2.adobe.com/cps/408/kb408524.html
However, I am having almost the same problem with Windows XP SP3. I have tried installing and updating using both an admin class user and the actual Administrator. At first I thought it might be related to Symantec EndPoint until I saw the Vista thread, but I get the same problems even with EndPoint not on the machine. The posted technote (which seems oddly written by the way.. mentioning junctions AND folders?!?) does not cover XP, only Vista. My attempts to translate it over to XP procedures does not get very far.
The install goes fine, but any subsequent updates for the suite fail. Once the failure occurs, InDesign and other apps will refuse to open. I can't even right-click a file in Windows Explorer or it also results in a crash (I am guessing to the CS Drive and Bridge additions to the contextual menu). The main apps that fail to update appear to be the same ones mentioned for Vista:
Adobe Drive and Services update (aka Version Cue client 4.0.1, Creative Suite Infrastructure 1.0.1)
Adobe Version Cue Server 4.0.1 update
Flash Lite 3.1 Update for Adobe Device Central CS4 (aka Device Central 2.1)
Adobe Output Module update for Adobe Bridge CS4 (aka Output Module 2.1)
Extensions Manager CS4 2.1
Screenshots of the errors are here:
http://drop.io/tlzrsif
Luckily we use drive images for our systems so I can hop back to a freshly prepped notebook with out much delay, but given the long CS4 install time this has become a pain to try to solve.
Have any others run into this problem using XP and not Vista?

here you go
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunesHelper.exe
Application Version: 7.3.1.3
Application Timestamp: 468d67e8
Fault Module Name: QuickTimeStreamingAuthoring.qtx
Fault Module Version: 7.2.0.240
Fault Module Timestamp: 4684a83a
Exception Code: c0000005
Exception Offset: 00016c09
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 18fe
Additional Information 2: f42ba5cd8b2ed31f18b99a5ea46137af
Additional Information 3: 4735
Additional Information 4: ae0a749503b699b3b75d581a3dbfd557
Extra information about the problem
Bucket ID: 466198587

After installation of cs4 extended upgrade update installations get "adobe setup has stopped working

I've used CS3 and CS4 expanded (upgrade) on my older computer with Windows XP and though slow, mainly after cs4 was installed, they worked well. I've recieved a new computer for christmas and am moving my CS3 and CS4 expanded (upgrad) to the new computer and am having some problems.
My new computer setup is this.....
Windows Vista , Premium Home edition (65bit) with SP1
Intel Core i7-920 Quad Core Processor
RAM -3GB DDR3
Amount of free disk space. 653 GB
Make/Model of Video Card. - ATI Radeon HD 4850
CS3 installs fine though on execution photoshop says that it prefers a dua core processor I click the continue button and it seems to run fine.
After installing CS3 I restart and upload CS4, which takes a long time!, then run bridge to install updates and thats where my first problem occurs.
When the updates are installing I get this message...."Adobe setup has stopped working" and windows looks for a solution which of course isn't there, ha!
So I've tried to use CS4 without the updates, run bridge, select a photo to open in photoshop and after photo opens in photoshop an error message comes up saying this "the specified modul could not be found C:\programfiles\commonfiles\adobe\Adobe Version Cue C44\client\4.0.1\Version Cue.DLL" and when I x out the error box photoshop closes, unable to use it any further (not bridge though)
I suspect this error message comes up because I can't do the updates? Either way I sure could use some help here!
Oh, and I've deactivated and reinstalled and the same happended after reinstallation.
Thanks in advance for any help you can give!

People like me, who distrust Adobe's updater, get the updates from the Adobe download site. That way you have control and you only get what you need. For example, if you are not working with colleagues on a network you don't need Version Cue.
Don't worry about the message regarding the processor. Adobe's installers are just as bad as their automatic updates and your processor is simply too new and they are not up-to-date. You may get similar false alarms with Bridge.

Java(TM) 2 Platform Standard Edition binary has stopped working

Does anyone ever put ODAC10203x64.zip into Windows Server 2008 x64? I hit the error:
Java(TM) 2 Platform Standard Edition binary has stopped working
Ming Man

Hi Mark,
Let me get you more details.
I have Windows Server 2008 x64 running with Visual Studio 2008 installed.
For Oracle, I have cleared all my previous installation and even deleted all the folders for previous installation of ODP.NET. After that I only installed the Oracle Database 10g Client Release 2 (10.2.0.4) from the link you gave (I installed all the components) :
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html
I have Oracle Database 11g running on VMWare on Windows XP 32 bit.
When I run my WinForm application using code so far so good. I extract data from the HR schema and put them in listbox, perfectly no error.
But when I am trying to create by Add New Data Source... then I hit the:
Attempt to load Oracleclient libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components
Hope that can give you a better idea.
Ming Man

I get error saying creative cloud setup has stopped working

why do i get an error saying creative cloud set up has stopped working.

NObody can tell you anything without proper system information and other technical details.
Mylenium

SCOM 2012 System Center Operations Manager has stopped working when adding Web Console.

I am trying to ad the Web console to one of my Management Servers but at the point where it asks what website to use it fails with the "System Center Operations Manager Setup has Stopped working error.
This is the included information.
Problem Event Name: CLR20r3
Problem Signature 01: setupchainerui.exe
Problem Signature 02: 7.0.9538.0
Problem Signature 03: 509042f2
Problem Signature 04: System
Problem Signature 05: 4.0.30319.18022
Problem Signature 06: 506a7689
Problem Signature 07: 1cf5
Problem Signature 08: 72
Problem Signature 09: System.UriFormatException
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1033
Additional Information 1: 79c6
Additional Information 2: 79c63d7b6daeea05a42903612b7137d2
Additional Information 3: 88ec
Additional Information 4: 88ec54f8fa758d8069cdb2ad5cd91e2b
The only error I get in the log file is this.
Error: :Error:IsReportingValidToInstall failed SRS instance not provided
I don't understand why I would be getting an SRS error, our reports run fine.
Thanks,
Gary

Hi Gary,
Did you end up finding a solution to this issue? The GUI and silent/command line installer are failing for me in the same spot.
App Log Errors:
Application: SetupChainerUI.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.Common.ServiceNotRunningException
Stack:
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(System.Exception)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings,
Microsoft.EnterpriseManagement.Common.Internal.SdkChannelObject`1<Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService>)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings,
Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.ManagementGroupInternal)
   at Microsoft.EnterpriseManagement.ManagementGroup.Connect(System.String)
   at Microsoft.SystemCenter.Essentials.SetupFramework.WebConsoleSite.GetValidationProperties(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
Faulting application name: SetupChainerUI.exe, version: 7.0.9538.0, time stamp: 0x509042f2
Faulting module name: KERNELBASE.dll, version: 6.3.9600.16656, time stamp: 0x5318237f
Exception code: 0xe0434352
Fault offset: 0x00000000000043c8
Faulting process id: 0x638
Faulting application start time: 0x01cf9a697847d9c8
Faulting application path: C:\Users\szb\AppData\Local\SCOM\SetupChainerUI.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: c52d5d75-065c-11e4-80c2-00155dcb0b37
Faulting package full name:
Faulting package-relative application ID:

Firefox has stopped working Problem Event Name: BEX

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/934592]]</blockquote>
hi my firefox internet wont start up, when i try a fire fox has stopped working panel comes upThe following comes up in my microsoft windows fire fox has stopped working panel, please help me out im not awesome at using computers but can follow directions, thanks
Problem signature:
Problem Event Name: BEX
Application Name: firefox.exe
Application Version: 14.0.1.4577
Application Timestamp: 5000b729
Fault Module Name: LVPrcInj01.dll
Fault Module Version: 11.80.1048.0
Fault Module Timestamp: 488b3c09
Exception Offset: 00006074
Exception Code: c000000d
Exception Data: 00000000
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 3081
Additional Information 1: cd21
Additional Information 2: 01d9174c762f08c4addf02cfdc2dd662
Additional Information 3: 5f3e
Additional Information 4: f33234e8bd4e4c7a45cfb8b872a5e602

The lvprcinj01.dll mentioned in the report is part of Logitech QuickCam
Try to contact Logitech support for help.
*http://forums.logitech.com/t5/Webcams/bd-p/quickcam_software

Cannot install Office 2013: Microsoft Setup Bootstrapper has stopped working

I have been trying to install Office 2013 and get this error. Microsoft Setup Bootstrapper has stopped working. Full details are below.
The version of office I am installing is
en office professional plus 2013 with sp1 x86 and x64
The error log shows:
2014/11/04 16:10:55:382::[7440] Cannot start standalone OSE. from <path>\en_office_professional_plus_2013_with_sp1_x86_and_x64_dvd_3928186\x86\proplusr.ww\ose.exe. Error code: 0x80070102
2014/11/04 16:10:55:382::[7440] Error: Unable to select Source Engine process to start, see debug level logs for detail Type: 88::UnexpectedError.
2014/11/04 16:10:55:398::[7440] Error: Unable to select Source Engine process to start, see debug level logs for detail Type: 88::UnexpectedError.
2014/11/04 16:10:55:398::[7440] Error: Unable to select Source Engine process to start, see debug level logs for detail Type: 88::UnexpectedError.
2014/11/04 16:10:55:398::[4744] WER element [P4] is set to value [UnexpectedError]
2014/11/04 16:10:55:398::[4744] WER element [P7] is set to value [UnexpectedError]
2014/11/04 16:10:55:398::[4744] WER element [P6] is set to value [Unable to select Source Engine process to start, see debug level logs for detail]
2014/11/04 16:10:55:398::[4744] WER element [P6] is converted to [C6F06531]
2014/11/04 16:10:55:398::[4744] Error: Unable to select Source Engine process to start, see debug level logs for detail Type: 88::UnexpectedError.
2014/11/04 16:10:55:413::[4744] Catalyst execution finished: 11/04/2014 16:10:55. Return code: 30088. Exception caught: UnexpectedError.
2014/11/04 16:10:55:413::[4744] PERF: TickCount=4546680 Name=RunSetup Description=End function
The error window shows:
[Window Title]
Microsoft Setup Bootstrapper
[Main Instruction]
Microsoft Setup Bootstrapper has stopped working
[Content]
Windows can check online for a solution to the problem.
[V] View problem details [Check online for a solution and close the program] [Close the program]
Problem signature:
Problem Event Name: OfficeClassicSetup
SETUP EXE VERSION: 15.0.4454.1000
SETUP DLL NAME: OSETUP.DLL
SETUP DLL VERSION: 15.0.4569.1503
ERROR CODE: UnexpectedError
MSI HRESULT: Unspecified
ERROR DETAILS: C6F06531
FIRST ERROR CODE: UnexpectedError
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 2057
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

I managed to fix this... here’s what I did:
I extracted the MSDN ISO to my downloads folder
I created an office 2013 config file with logging set to verbose and copied it to the x64 installer directory
I ran the installer and looked in my temp folder (c:\users\rob.henwood\AppData\Local\Temp)
The log file created said “Cannot detect OSE Service”
I found the OSE Service in the setup folder from the ISO
I looked on another machine and found where it is installed then copied the registry settings for the OSE service.
I restarted the machine and found the Office 64 Source Engine service now existed. I started the service.
I ran the Office installer again and it all worked OK!
Steps to fix:
Create a folder for OSE
C:\Program Files\Common Files\microsoft shared\Source Engine
Copy the OSE.exe file to that folder
Open the OSE.reg file (shown below) and apply the registry settings in that file to your registry
Restart your machine
Open services (services.msc) and see that Office 64 Source Engine is installed
Start the service
Try installing Office 2013/Visio 2013.
OSE.reg:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ose64]
"DisplayName"="Office 64 Source Engine"
"Description"="Saves installation files used for updates and repairs and is required for the downloading of Setup updates and Watson error reports."
"Type"=dword:00000010
"Start"=dword:00000003
"ErrorControl"=dword:00000001
"ImagePath"=hex(2):22,00,43,00,3a,00,5c,00,50,00,72,00,6f,00,67,00,72,00,61,00,\
6d,00,20,00,46,00,69,00,6c,00,65,00,73,00,5c,00,43,00,6f,00,6d,00,6d,00,6f,\
00,6e,00,20,00,46,00,69,00,6c,00,65,00,73,00,5c,00,4d,00,69,00,63,00,72,00,\
6f,00,73,00,6f,00,66,00,74,00,20,00,53,00,68,00,61,00,72,00,65,00,64,00,5c,\
00,53,00,6f,00,75,00,72,00,63,00,65,00,20,00,45,00,6e,00,67,00,69,00,6e,00,\
65,00,5c,00,4f,00,53,00,45,00,2e,00,45,00,58,00,45,00,22,00,00,00
"ObjectName"="LocalSystem"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ose64\Security]
"Security"=hex:01,00,14,80,8c,00,00,00,98,00,00,00,14,00,00,00,30,00,00,00,02,\
00,1c,00,01,00,00,00,02,80,14,00,ff,01,0f,00,01,01,00,00,00,00,00,01,00,00,\
00,00,02,00,5c,00,04,00,00,00,00,00,14,00,9d,01,00,00,01,01,00,00,00,00,00,\
05,04,00,00,00,00,00,14,00,fd,01,02,00,01,01,00,00,00,00,00,05,12,00,00,00,\
00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,20,02,00,00,00,\
00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,06,00,00,00,01,01,00,00,00,00,\
00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

Microsoft Setup Bootstrapper Has Stopped Working when Trying to Install MS Project Professtional 2013

I cannot get the trial version of MS Project 2013 to load onto my computer.
I keep getting "Microsoft Setup Bootstrapper Has Stopped Working" error message when attempting to download.

What operating system are you attempting to install to?

Microsoft setup bootstraper has stopped working

hi, when i am trying to install microsoft office professional plus 2013 in my windows8.1 based system pc , i can not installed it. there shows a massage " microsoft bootstraper has stopped working" i tried to installed it several time but
it shows same massage . please help me.....

Hi,
"Microsoft Setup Bootstrapper has stopped working" is a generic error for Office installation. It could be caused by lots of reasons, thus the troubleshooting of this issue can be tricky.
You might first check the setup log file and see if there is anything useful there. If you would like us to help analyze the logs, you can send the log file to this email account:
[email protected] and inform us here (the email subject should be the link of this thread).
Also, to troubleshoot the issue, I would sggest we try following steps:
If you have any trial or beta version of Office 2013 ever installed on your computer, please try to run
Microsoft Fix-It tool
to remove any possible traces which might cause the problem.
If you have enabled any real-time scanning feature of your antivirus program or firewall application, temporarily disable them, then try again.
Hope this helps.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Microsoft Setup Bootstrapper has stopped working, cannot install

We have acquired license for MS Office Pro Plus 2013. and downloaded SW_DVD5_Office_Professional_Plus_2013w_SP1_64Bit_English_MLF_X19-35976.ISO
to be installed on my 64bit system. but i am unable to do that as it reaches half way and then shows below mentioned message,
Microsoft Setup Bootstrapper has stopped working
I have tried several suggestions like cleaning registry, disabling firewalls, antivirus, stopping print spool, stopping services etc.
please help me get thru this problem.

Hi,
There are many reasons for the happening of this problem (Bootstrapper has stopped working), like a beta edition of Office exists, antivirus or firewall program or other security software, etc.
Have you ever attempted to install other Office products on this machine previously? Remnants of old Office installation is a common cause of this issue.
I see you've mentioned "cleaning registry", not sure how you did this, the recommended way to remove any traces/remnants for the old Office instance from your system is to run
Microsoft Fix It tool.
After this, please try again in Windows clean boot and see if issue persists:
http://support.microsoft.com/kb/929135
Please feel free to post back with any findings.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Hello. I am having trouble using Mobileme with microsoft oulook 2010. .The error Mobileme has stopped working . Can anybody help. ??Thanks

Hello
I am having trouble using Microsoft Outlook 2010. When starting Microsoft Outlook displays the error message Mobileme has stopped working. Can anybody help.
Thanks

Well yes, of course you are having trouble using MobileMe because MobileMe no longer exists and has not existed for the last 2 years at least.
MobileMe has been replaced by iCloud, so you will never be able to use MobileMe because it does not exist.
Also, I would suggest that you look more closely before you post, because you have posted this in an iPhone forum and this question has nothing to do with iPhones. You would get more help if you posted in the correct forum.

Microsoft Standard 2010 setup has stopped working

Similar Messages

Maybe you are looking for