Microsoft support for unix integration systems

I have been told that Microsoft has stopped supporting any integration between Unix and Active directory in case that integration makes any modification to the AD schema. Is that true?

Hi,
Depends on your version and what you what to achieve
These five states a possible and supported
UNIX clients use Active Directory Kerberos for authentication but continue to use an existing UNIX-based data store for authorization.
UNIX clients use Active Directory Kerberos for authentication and use Active Directory LDAP for authorization.
UNIX clients use Active Directory LDAP for both authentication and authorization.
UNIX and Windows infrastructures remain separate: UNIX clients use UNIX-based Kerberos for authentication, Windows clients use Active Directory Kerberos for authentication, and a cross-realm trust enables UNIX and Windows users (if the cross-realm trust
is a two-way trust) to access services in the other side.
more info is available here
Authenticate Linux/Unix to Active Directory
- The Windows Security and Directory Services for UNIX
Support has "always" been officially non-existing for 3.party modifications to the schema.

Similar Messages

DMA from host to FPGA target is not supported for this remote system.

I am trying tocommunicate with my FPGA (on the cRIO 9002) from the RTOS. I setup up anOpen the correct VI reference with no error but as soon I try to access thefifo I receive error -63001 and the attached message says:
Error -63001 occurredat Open FPGA VI Reference in target - multi rate - variables - fileIO_old.vi
Possible reason(s):
NI-RIO FPGACommunications Framework: (Hex 0xFFFF09E7) DMA from host to FPGA targetis not supported for this remote system. Use another method for I/O or changethe controller associated with the FPGA target.
What other I/O optionsdo I have to move data asynchronously from the RTOS to the FPGA. I triedcreating memory but it appears that I can not write to the memory from the RTOSside.
We also have a 9012sitting around will using this cRIO instead solve this problem.
I am very very greenwhen it comes to LabView so I apologize if this is an easy question.
Solved!
Go to Solution.

As stated in the NI-RIO driver readme,
DMA is not supported from the host to the FPGA on the cRIO-900x series.
The cRIO-901x controller supports DMA transfers from host to FPGA and
FPGA to host while the cRIO-900x series controllers only support FPGA
to host DMA transfers. Therefore, LabVIEW returns an error if you try
to transfer using DMA from the cRIO-900x controller.
The 9012 looks like the ideal solution, you are very lucky to be having extra hardware laying around
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

SCOM Support for Unix Flavor

Hi - I am trying to find out whether the unix solaris agent can work on all its flavor - Ex - Nexenta OS - is solaris based OS but customized for storage products. Similarly We have Linux flavors for NAS - ex - QNAP TOS. If not
supported - Please share any doc/ references / framework you may have for customizing these agents or developoing a new agent. Appreicate your help.
Sathya

Sasthya,
Can't say we officially support those versions of the
OS's but if they are just hybrid versions of supported OS's than most likely they would work but we would not provide official support for them.
You can try to run the Discovery Wizard against them and see what happens. The wizard copies the GetOSVersion.sh script over to the system and runs it. This script determines if it's a supported version or not. If the wizard determines it is not supported
you can modify what the GetOSVersion.sh file is looking for to determine the OS and once you get past this it should try to install the agent package. If the agent package is successful and the [scxadmin -status] shows the agent running once complete you should
be good.
If the above does not work you can always build your own agent for each specific OS -->
http://scx.codeplex.com/
Regards,
-Steve

Microsoft support for Windows Server 2008 R2 on vSphere 5.5

Hi, everybody.
I'm checking if Microsoft will provide support for Windows Server 2008 R2 running on a VM on vSphere 5.5 Update 2. So far what I've found at
http://windowsservercatalog.com is:
Filtering vendor VMware and Windows Server 2008 R2, it shows vSphere up to version 5.0 update 1
http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=34&ava=0&avq=0&OR=1&PGS=25&ready=0
http://www.windowsservercatalog.com/item.aspx?idItem=c92e5cbd-9690-b62a-2ace-843390ac3ea4&bCatID=1521
Filtering vendor VMware it shows vSphere 5.5 update 2, but details only Windows Server 2012, not Windows Server 2008 R2.
http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=0&ava=0&avq=0&OR=1&PGS=25&ready=0&PG=2
http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
Does that mean Microsoft doesn't support Windows 2008 R2 on vSphere 5.5 update 2?
I'm aware Windows Server 2008 R2 lifecycle is close to EOL, but customer requires this specific version for application compatibility.
Thanks

Hi mdgrkb,
Products that have passed the SVVP requirements for Windows Server 2012 R2 are considered supported on Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, and
Windows Server 2003 SP2 and later Service Packs, both x86 and x64.
Look this website the top left additional information:
http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Satellite Pro L300 - OpenGL 2.0 support for Intel Integrated Graphics

Just want to share the news that I was able to install the new Intel Chipset drivers that add OpenGL 2.0 support to their integrated graphics chips, such as the X3100.
This driver was released in December 2008 and even though Intel recommends waiting for OEM versions from Toshiba, I decided to try theirs.
Links and more info are found in this thread:
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProductID=2800&DwnldID=1722 0&strOSs=All&OSFullName=All%20Operating%20Systems& lang=eng
This new driver is for all laptops with the following chipsets:
Intel(R) G31 Express Chipset
Intel(R) G33 Express Chipset
Intel(R) G35 Express Chipset
Intel(R) G41 Express Chipset
Intel(R) G43 Express Chipset
Intel(R) G45 Express Chipset
Intel(R) Q33 Express Chipset
Intel(R) Q35 Express Chipset
Intel(R) Q43 Express Chipset
Intel(R) Q45 Express Chipset
Mobile Intel(R) GL40 Express Chipset
Mobile Intel(R) GL960 Express Chipset
Mobile Intel(R) GLE960 Express Chipset
Mobile Intel(R) GM45 Express Chipset
Mobile Intel(R) GM965 Express Chipset
Mobile Intel(R) GME965 Express Chipset
Mobile Intel(R) GS45 Express Chipset
Maybe someone will try the exe file installation and report back -
I followed the manual installation instructions and for now everything works fine.
Message was edited

Hi mate
First of all thanks a lot
Ive got a U400 and I have installed a Intel graphic card driver from the Intel page too.
I didnt execute the exe file but I updated my driver in device manager.
This worked fine.
Also I read here in the forum that drivers from external pages can be used only at the own risk because such drivers are not tested and not certified by Toshiba
However, my U400 run trouble free till now.

Microsoft support for MacOffice 2011 referred me to Geeks, which proceeded to take over my computer, found dozens of hacker messages, then signed me up for a year of Geeks support

I am running a new (January 2015) iMacx with a fusion 1 terabyte HD and Yosemite. I had to buy a new MacOffice 2011 because the one on my MacBook was not allowed to transfer over. That was when the trouble began. Word would not load so IO phoned Microsoft Support which babbled a bit then said their consultant would help;. That was Geeks. They needed access to my computer and I was fool enough to do it. They showed me dozens of pages of hacker intrusions including lots originating from foreign countries, then said they could clear it up, get rid of the malware and viruses. Took nearly 2 hours. When it was over the iMac worked better, MacOffice loaded fine. But then I started getting warnings from Apple saying someone had my secret logon and was accessing iCloud on their new iPhone. Geeks called the next morning to see how things were going,. I told them and - same routine, into my computer. This time I said I did not want iCloud, iTunes, i-anything.They assured me they took everything out. The mystery accesses continued for another couple days until I went into Keychain Access and deleted everything that had to do with iCloud and the rest of the i-'s, then I deleted all the RSA private keys that seemed unfamiliar. I also changed all my passwords figuring it was clearly Geeks doing it as the Apple warnings said that some of these accesses using my passwords was to a Geeks web site address. Now everything is solid for the first time. No more warnings from Apple, but very frequent shutdowns of Word and Excel.

First, you need to call your bank and credit cards and tell them too. They will cancel every bank and credit card you have and give you new ones. They will probably put you on a fraud watch too. They will also refund any money you've given to the scammers.
Then, contact Apple Support using any method here: http://www.apple.com/support/
Tell them what happened and let them help you resolve your information on their end. Once you get your new credit card information you will have to get everything setup again.
Finally, you will need make sure you have a good backup. I suggest using Time Machine. If you don't already have a backup, you will need to purchase an external hard drive at least as large as all of your current drives. Then, boot into your recovery volume (OS X: About OS X Recovery - Apple Support), erase your hard drive and reinstall OS X. Migrate only your user documents from your backup, no applications. Then, manually reinstall all applications that you didn't purchase through the Mac App Store.
These scams are getting more and more common. In the past, I have been reluctant to suggest erasing your hard drive. I think that just victimizes people all over again. But I don't know what else to suggest. Supposedly, these scammers are only after money, but what you describe is really a worst-case identity-theft scenario. I wish I had some better solution for you, but I don't.

Support for Co-ordinate system?

Does anyone know whether Oracle Spatial supports the mapping co-ordinate system used in Romania (Stereo70)?

Yes, this SRID is based on the EPSG projection method 9809 ("Oblique Stereographic"). If you are not sure whether this is the SRID you need, do you also have some numeric parameters?
SQL> select wktext from cs_srs where srid = 31700;
WKTEXT
PROJCS["Dealul Piscului 1970/ Stereo 70", GEOGCS [ "Dealul Piscului 1970", DATUM
["Dealul Piscului 1970 (EPSG ID 6317)", SPHEROID ["Krassowsky 1940 (EPSG ID 702
4)", 6378245, 298.3]], PRIMEM [ "Greenwich", 0.000000 ], UNIT ["Decimal Degree",
0.01745329251994328]], PROJECTION ["Stereo 70 (EPSG OP 19926)"], UNIT ["Meter",
1]]
SQL>
By the way: the WKT is relatively short, and does not contain projection parameters. This is because the 9809 method is not mapped to a legacy projection, and thus the legacy parameters for this projection are not available. The EPSG parameters are in the SDO_COORD_OP_PARAM_VALS table.

LabVIEW Support for Innovation Integration X5-210M

I was wondering if anyone here is using Innovation Integration X5-210M module: http://www.innovative-dsp.com/products.php?product=X5-210M
and was able to interface the acquired data with LabVIEW.
Their support is only in the form of C++ libraries and an example program. They also suggest, in a very general way, how to create a DLL for LabVIEW: http://www.iidsp.com/forum/viewtopic.php?t=549
I am having a hard time trying to put it together. If anyone has found a solution, I appreciate it if you guide me in the right direction. Please be specific.
Thanks.

Ghulam-
Take a look at this link:
http://decibel.ni.com/content/docs/DOC-2028 this is an example on running a C DLL in LV but the architecture should be very similar to making a C++ version. Let me know if this helps! Happy Presidents Day!!
Sam S
Applications Engineer
National Instruments

Help! my EFI System update says not supporting for mountain lion system! Why is that so? and i check my bios and boot rom version but still this happening? why is this happeneing and i cannot open hardware test?!

hello people i folow the steps of hardware test opening thing while starting up, but since i instaled mountain lion its not showingup!? why the **** is that so?!

Then it's not for your model MacBook Pro.

How to claim for Hacked/Missing Live/Hotmail account from Microsoft Support

Recently We've seen tons of people submitting request on retrieve his hacked/Missing Hotmail/Live account or related from feedback system, then gather below ways on retrieving your account:
#1 If you are a Hotmail customer who needs help with your Hotmail account, go to
Microsoft Answers—Hotmail, Windows Live Messenger & Microsoft SkyDrive or to your
Account overview.
#2 Visit here:
http://windows.microsoft.com/en-us/windows-live/microsoft-account-help#microsoft-account=tab0
#3 Watch this useful video:
http://windows.microsoft.com/en-us/windows-live/account-reset-password-forgot-faq
#4 Visit here:
https://support.msn.com/default.aspx?locale=en-us, then change your location accordingly --> Hit 'My MSN' --> Fill in relevnat fields to address your request:
Pan Zhang Customer Support Visual Studio Cloud Service team

Thanks Pan!
I turned this into a Wiki article here and gave you credit:
http://social.technet.microsoft.com/wiki/contents/articles/15627.how-to-get-microsoft-support-for-a-hacked-or-missing-livehotmail-account.aspx
Ed Price (a.k.a User Ed), SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

2.1 speakers system support for SB Live! 5.1

Hi all, I have a SoundBlaster Li've ! 5. sound-card and a Yamaha 2. speakers system with only one cable to be plugged into the card. My problem is that I have no driver to offer support for 2. speakers system (I got only 2 speakers, 4 speakers, 5. and 7., but no 2.). When I plug my speakers I hear only the left channel into the left satelite, the right satelite being useless. Please check and advise if there are some drivers which can offer 2. system support and where I can get them from. I have a computer running on Win XP SP 3. If you need additional details regarding my sound card, let me know. Thank you in advance !?

JBOne,
You may be able to download the CD for your card from here. Use the model number (...sb0...) embedded in the serial number on the white sticker on your card to identify your model.Message Edited by Katman on 06--20070:58 PM

Enterprise System 5 support for Windows 2003 server

Hi,
Can you tell me if it is possible to run Sun Java Enterprise System 5 on a windows server and get the portal server to work?
Weare currently using JBoss ... and not very keen on it as a portal server.
I tried installing ES5 but was unable to get the portal server to play, then i read something about no support for windows 2003 in ES5.
Can someone confirm if this is true, unfortunately I am tied into using a windows server for lots of reasons. Is the download for ES4 still available? I believe Portal 6.0 instead of 7 is still ok for windows Server 2003 ?
If Portal 7.0 will play with windows, is there a guide somewhere that you can point me to as I am totally new to portals and could use a bit of an idiots guide.
Any info welcome !!
Cheers

The support for Sun Java System Portal Server on Windows in Java Enterprise System 5 is limited to evaluation and development only. The Windows distribution for Portal Server (PS 7.1 Update 2) is provided as a pre-configured install. To install it, you unzip the file, and run a small setup script to change the hostname information. The pre-configured installation is setup with a fixed install location, ports, etc. so it is not really suitable for a deployment for that reason. Once installed, all of the functionality is there otherwise except the ability to patch the system.
Note: I just tried going through the download links, and there is something broken in the Sun download center. I've sent an internal notification about this.

Support for SLES, Debian and CentOS

I'm planning to install Zenworks Endpoint Security Management and I would like to know if it would release a support for linux platform especially Debian and CentOS. We have a heterogenous network environment and there are servers that are running Debian and CentOS. Is it possible for ZESM to release a support for these operating systems? Also, would there be a release where ZESM could be installed in SLES?

Take a look at the new ZCM11 - currently in Beta1 - for SLES & Red Hat support and broader support DBs - Oracle and Sybase included.
http://www.novell.com/communities/no...agement-beta-1
Most of ZESM functionality is built into this new architecture. You'll also get integrated Linux Management on this build.
>>>
From: vindveif<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 5/31/2010 5:56 AM
Subject: support for SLES, Debian and CentOS
I'm planning to install Zenworks Endpoint Security Management and I
would like to know if it would release a support for linux platform
especially Debian and CentOS. We have a heterogenous network environment
and there are servers that are running Debian and CentOS. Is it possible
for ZESM to release a support for these operating systems? Also, would
there be a release where ZESM could be installed in SLES?
vindveif
vindveif's Profile: http://forums.novell.com/member.php?userid=33233
View this thread: http://forums.novell.com/showthread.php?t=411885

BP for Sales; also supported for release 4.6C?

Is it also possible to use some of the functions of the business package for Sales Distribution for connecting to an SAP system 4.6C (for example transaction VA21?)? I mean, the "business package for Sales" is only supported for the backend system upper than mySAP ERP 2004 but I also need a connection for release 4.6C. Are there existing some other BPs or are they planning something or must I develop at myself? I do not want to use the standard ITS webgui and hope there are some developed templates which I can use.
Regards,
Frank

Frank,
I have exactly the same issue. I want to use the Sales BP with an R/3 4.6C system.
Can you tell me if is this possible?
Thanks in advance
Patricio

Why doesn't elements 12 have 64 bit support for PC users?

Why doesn't elements 12 have 64 bit support for PC users? Most PC's these days are shipped with far more than 2GB of RAM. This move seems very limiting to those with high demands for RAM. Image sizes are only getting larger meaning more RAM needed for adjustments and editing. I have been putting off buying elements 11 waiting to see if 12 had 64 bit support and I am very disappointed to find it doesn't. I can't see myself buying 12 unless a 64 bit for PC is launched soon.

Update? It's a major release, ain't it?
Mac got the 64-bit. Why? From Pete Green's announcement:
A handful of features from previous versions are not available in Photoshop Elements 12 due to new product support for 64-bit systems.
But, of course, Windows users have no such need...

Microsoft support for unix integration systems

Similar Messages

Maybe you are looking for