Microsoft Teredo tunneling adapter #2 is not working

Hi, i'm having problems with "microsoft teredo tunneling adapter #2". I've tried to fix it, but it keeps on saying that it's not working.When i set the tcpip6/parameters value to 0 it only fixed the teredo tunneling adapter but the teredo tunneling
adapter #2 is still not working. any ideas?

Sten
This is a known problem if Zone alarm is installed. If you have it installed remove it at least to check
To turn off Teredo tunneling interface 6to4 open an elevated command prompt and type
netsh interface terredo set state disabled.
To Re-install it
Click on Start.
Type Device Manager in search box and open it.
Click the Action tab at the top and click add legacy hardware
then click next and next again it will then scan and find nothing click next on the screen after that.
Wait a minute and you will see a list of hardware appear, scroll down and choose network adapters then click next, then from the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling Adapter, then click
next and this will install it.
To check just make sure it is set to show hidden devices, right click on device manager on the right and click view then show hidden devices.
Wanikiya and Dyami--Team Zigzag

Similar Messages

Problem instaling fix for Microsoft teredo tunneling adapter

In Devices and Printers, the desktop icon shows an exclamation point. I ran troubleshooting and was informed that I need Microsoft teredo tunneling adapter. I have no idea what that is. The Troubleshooter tried to install it but was unsuccessful.
As far as I can tell, my computer operates OK, although I have had some issues with using Skype.
I read that the Zone Alarm firewall may interfere with the installation or operation of the teredo adapter. I no longer have Zone Alarm.

1. You would do better to describe your system in a bit more detailed. What you are trying to achieve. The missing teredo is only a consequece of something that we, readers , do not know.
2. For Zone Alarm you are advice to place an question in Zone Alarm forum and/or support
http://www.zonealarm.com/security/en-us/company/community.htm
I would try to do all you need in test environment with firewall disabled.
3. For new items in Windows 2008 R2, read the book that is available for free on MS download:
Windows_Server_2008_R2_e-book.pdf
Regards
Milos

Automatic uninstallation of Microsoft Teredo Tunneling Adapter

Hi,
I am attempting to uninstall the Microsoft Teredo Tunneling Adapter by using a script, on a Windows 8 Enterprise x64 OS. The device is installed incorrectly by default:
This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful
and it is not useful at all in our organization.
I've tried so far to use devcon.exe and pnputil.exe, but it is impossible to perform the uninstallation.
However, if I perform the uninstallation manually from DevMgr (right-click on device and Uninstall), the Microsoft Teredo Tunneling Adapter is removed successfully, without being reinstalled after reboot.
Can you please indicate how should I perform an automatic uninstallation of this device?
Many thanks,
Cristian

I've already tried to disable it using netsh, but it's still present in Device Manager as a ghost device (with exclamation mark). One of my goals is to have a "clean" computer, without ghost devices.
I forgot to mention that the Teredo tunnelling adapter ghost device appears only if disable IPV6 using:
reg.exe add hkey_local_machine\system\currentcontrolset\services\TCPIP6\parameters /v disabledcomponents /t reg_dword /d 0xffffffff /f
during the MDT deployment (after the WinPE step is completed we use an internally-developed sequencer to perform driver installation and country-dependent customizations).
However if I enter this registry value AFTER the first logon (using an administrative account) the Teredo ghost device does NOT appear anymore. I tried to attach the reg.exe command in the RunOnce section, but it needs an administrative account in order to
succeed.
Do you know what is the correct timing to set that registry value (actually to disable IPV6) during the MDT installation? The dilemma is:
- if the key is entered too early, then the Teredo ghost device appears
- if the key is entered too late (e.g. attached to RunOnce) then the user does not have permission to enter the reg. value.
Thanks

Microsoft Teredo Tunneling Adapter and Microsoft 6to4 Adapter

Hi ,
as per best practice of Cluster Hyper-v All drives on all nodes should be the same version
But I found network drivers "Microsoft Teredo Tunneling Adapter and Microsoft 6to4 Adapter" are installed one some nodes and not installed on other nodes
IP Ver 6 is enabled on all network drivers
So What should I do and How ? Install the drivers or uninstall it and how to do that ?
thanks in advance.
Ramy

Hi Ramy,
"So What should I do and How ? Install the drivers or uninstall it and how to do that ?"
Teredo is an IPv6 transition technology that provides address assignment and host-to-host automatic tunneling for unicast IPv6 traffic when IPv6/IPv4 hosts are located behind one or multiple IPv4 network address translators (NATs).
You may keep the default setting .
If you want to create a hyper-v cluster , please refer to the step-by-step guide :
http://technet.microsoft.com/en-us/library/cc732181(v=WS.10).aspx
"Before you create the cluster, we strongly recommend that you run a full validation test of your configuration. Validation helps you to confirm that the configuration of your servers, network, and storage meets a set of specific requirements for failover
clusters. You can validate either an existing cluster or one or more servers that are not yet clustered."
This step will help you to check cluster configuration .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Microsoft teredo tunneling adapter code 10

Device manager said I have a bad Teredo tunneling adapter. Deleted adapter and then loaded new adapter. Message given was " this device cannot start ( code 10 ). Device manager says new adapter is bad ( shows yellow troubleshoot icon ) and after troubleshooting the message given say that I have up to date software- any help ????

Hi,
Try running through the guide on the following link.
http://appuals.com/microsoft-teredo-tunneling-adapter/
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Microsoft teredo tunneling adapter missing

I have a Compaq laptop running windows 7. I also have an Officejet 6700 wireless printer. About a month ago my printer quit working. Device manager said there was a problem with MICROSOFT TEREDO TUNNELING ADAPTER DRIVER.
I took my laptop to Staples where I had purchased both laptop & printer. They referred me to an expert who works for them.
The"expert" just removed the driver said when I reinstalled the printer it would be fixed. WRONG The expert no longer works for Staples. I can only print using my USB connection. No one seems to know what to do

Hi jaduling,
I understand that you are getting a message that the Microsoft Teredo Tunneling Adapter has a problem and the Officejet 6700 isn't working on the wireless.
I have provided a document which explains what the Microsoft Teredo Tunneling Adapter is used for and how to reinstall it. Step By Step Guide To Install Microsoft Teredo Tunneling Adapter. If you don't feel comfortable going into the registry, please contact the computer manufacturer to walk you through the steps. Always back up the registry before making any changes. How to back up and restore the registry in Windows.
Since the printer is already setup through a USB connection, follow this document to convert the printer from a USB connection to a Wireless connection.
Installing the Printer Software on a Wireless or Wired (Ethernet) Network.
Go to step 4.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Missing "Microsoft Teredo Tunneling Adapter"

I have a virtual machine running Windows Server 2008 R2 SP1 that is missing the "Microsoft Teredo Tunneling Adapter" in devmgmt.msc. I have done the regfix of adding DisabledComponents=0 under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\
and I have unhidden the devices in devmgmt.msc. I have rebooted several times and yet the "Microsoft Teredo Tunneling Adapter" doesn't come back. How do I manually add the interface?

Hi snickered,
Thanks for posting here.
Please try performing
“netsh interface ipv6 set teredo client” with administrator permission in command prompt and restarting this VM to see how is going.
Thanks.
Tiger Li
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Re: HP PAVILION G6 1291EV microsoft teredo tunneling adapter

i have mistakenly uninstalled my microsoft teredo tunneling adapter. how do i fix this problem

Hello @zani3,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you have mistakenly uninstalled your Microsoft Teredo Tunneling Adapter, and how you are looking to re-install it. I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Microsoft teredo tunneling adapter has a driver problem

I have been using my wireless printer for some time with my laptop. One day I found I could no longer print. When I checked the trouble shooting option, my response was, "Microsoft Teredo Tunneling Adapter has a driver problem". Can you help me to get my printer and laptop connected again?

Hi,
Before everything, please create a restore point first.
Please refer to this link:
MICROSOFT TEREDO TUNNELING ADAPTER
http://social.technet.microsoft.com/Forums/windows/en-US/9c1d4c54-4dca-4a42-932d-bfe6ced1c6bf/microsoft-teredo-tunneling-adapter?forum=w7itproinstall
You may need uninstall the problematic driver first.
Alex Zhao
TechNet Community Support

Microsoft Teredo Tunneling Adapter cannot start (code 10)

Hi guys,
I have a yellow *!* mark on my Microsoft Teredo Tunneling Adapter, and when I attempt to install it manually, it says it is already installed, but the driver cannot start (CODE 10). I'm also having an IP problems with my computer [Windows has detected
an IP address conflict], but I lack the knowledge and experience to know if this two problems are connected.
I've tried 2 device-updating programs (DriverTuner by LionSea, Driver Booster by IObit), yet neither of them ware able to help me .
If ANYONE out there have a solution for me, please submit it!
[Windows 7, HP]

Hi Ziv_Ger,
Regarding IP conflicts, please first use the Network troubleshooter,
For more information, please refer to the following article.
Get help with "There is an IP address conflict" message
http://windows.microsoft.com/en-hk/windows/get-help-ip-address-conflict#1TC=windows-7
After that, try to update the driver again.
Fix: "This device cannot start" Code 10 error in Device Manager in Windows
http://support.microsoft.com/kb/943104
Best regards,
Fangzhou CHEN

Microsoft Teredo Tunneling Adapter and Microsoft Teredo Tunneling Adapter #2

I have a Dell XPS STUDIO 7100, with MS Windows 7 Home Premium
for the past several days my system is running poorly.
In device manager there's yellow hi-lite for MS Teredo Tunneling Adapter
and Adapter #2.
the postings I've seen are not current. What is the most current info
regarding these Adapters and do I really need them?

Hi,
Here i share my test for such issue, which you can try:
Press Win + R, type regedit in Run.
Loate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TCPIP6\Parameters.
Find DisableComponents value, ( if you can not find it, please attempt to create one vaule ), then modify the Dword value to 0.
Reboot your computer.
Andy Altmann
TechNet Community Support

Microsoft teredo tunneling adapter not working

i have been facing this problem from about 3 days and I am not able to connect my phone through cable to my laptop neither i am able to use bluetooth...so I checked for the prblm and its this teredo adapter not working which is related to the devices i think....I
have followed every measure I could given by microsoft...I have tried uninstalling the teredo adapter but i couldn't...actually I clicked on the option dat was der as uninstall but it didn't....
after uninstalling only we had to restart the computer but since the uninstallation was not successfull so it didn;t helped me..
plz tell me some solution for this prblm!!!

Hi,
I am afraid that this forum is not a correct forum for this issue. Since this forum is discuss about Windows form development . I suggested you posting this thread to
answer.microsoft.com-Windows OS
Have a nice time!
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

MICROSOFT TEREDO TUNNELING ADAPTER

Am using Apple mac book in that I have made the partition and using windows 7 Professional. While I was trying to use install printer am facing this problem. please let me know how to resolve the issue.

Hi,
Please go to the device manager, under the Action tab, select Add a legacy hardware, in the device list, choose network adapter, and install it:
Alex Zhao
TechNet Community Support

Microsoft Teredo Tunneling Adaptor

My OS is Windows 7 Pro. I keep getting an alert message that the Microsoft Teredo Tunneling Adapter device is disabled. When I check the device I get a message "this device cannot start "Code 10". I can't
find a way to enable it. If anyone give me some insight a to what's going on and how to fix this I would appreciate it?

FS
Did not think it would tunneling is only used by printers etc. Can we get your event viewer logs?
Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to Onedrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem.
The work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Wanikiya and Dyami--Team Zigzag

I lost my wireless driver and teredo tunneling adapter

hi:
i lost my wireless driver and i'm lost to my microsoft teredo tunneling adapter and it shwed to me that this device cant start ( code 10 ) so please i need driver to wireless network and for teredo tunnelling
waiting your kindly replay
Thanks

Hi
Try performing a system restore to the date where the unit was working fine in case this does not help request to provide the device ID.
Open Device Manager
In the Device Manager menu, whichever way you got to it, find the driver that is missing (yellow question mark).
-Right click on that driver and go to “Properties”
-In the properties menu, click on the “Details” tab.
-In the details tab, click the dropdown and select “Device Id’s
When you have that sub menu opened up below, you should see a sentence containing a couple things you need.
-This is what it would look like for example:
-PCI\VEN_10DE&DEV_03D1&SUBSYS_14041565&REV_A2 (Might be a couple extra lines containing similar stuff, but the main things you need are the VEN and DEV
Request you to Copy it and provide the ID so that i can provide you the right link for the download.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Microsoft Teredo tunneling adapter #2 is not working

Similar Messages

Maybe you are looking for