Microsoft Update doesn't work after fresh System Restore
I installed a new hard drive (WD Scorpio Black, 750gb) in my Pavillion DV6-2150US and used the original HP disks to do a clean Windows 7 install. Now that I have installed the OS, the Windows update process doesn't work properly, and won't download updates. As a result, I can't install the Service Pack, etc.
I've tried the Microsoft troubleshooting steps for addressing the Windows Update issue, and they don't correct the problem. ervices" says the Windows Update service is running, but when I try to run Microsoft Update, I get the message the service isn't running.
I have tried the install from two different sets of HP disks, as well as the recovery disks I made when the computer was new. I get the same results each time.
Any thoughts as to what might be going on?
Hi
You can try this go to the following link and install Operating System - Enhancements and QFEs
Essential System Updates and see if it helps
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4121...
You can also reffer to the following
http://windows.microsoft.com/en-in/windows-vista/troubleshoot-problems-with-installing-updates
http://support.microsoft.com/mats/windows_update/
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.
Similar Messages
-
Uploading previous iWeb work after a system restore?
How do I upload previous iWeb work after a system restore?
I backed up my data on a Hard-drive then I did a factory reset or restore of my hard-drive....
Now I am attempting to open my previous iWeb work online and it is not working please help.....Your domain.sites2 file is the file that iWeb stores all its data and it is this file that you need if you want to continue updating your website in iWeb.
It is found under your User/Library/Application Support/iWeb folder and then the domain.sites file.
Your user library is the one with the house and this is where your personal user information is stored as opposed to your System Library which is general and where iWeb is not.
If you don't have your domain.sites file then you will have to re-build your site from scratch as iWeb does not have the ability to read or open html files - so a previously published site - it is a one way street creating html files upon publishing. -
Demo servlet IsItWorking doesn't work after fresh install
Hello,
We did a fresh install of Oracle 9iAS 1.0.2.2 on Hp-ux 11i
The installation completed succesfully, but
when trying to run the demo servlet IsItWorking, we get error 'The page cannot
be displayed'
The apache error_log file contains following lines:
[Thu Apr 18 17:12:03 2002] [notice] FastCGI: process manager initialized (pid
9809)
[Thu Apr 18 17:12:03 2002] [warn] OPM: ADM: process 9810 created server process
9811 (group group1, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:03 2002] [emerg] OPM: Watcher starts with an id=9810
[Thu Apr 18 17:12:03 2002] [warn] OPM: ADM: process 9810 created server process
9812 (group group2, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:04 2002] [notice] Oracle HTTP Server Powered by Apache/1.3.19
(Unix) mod_fastcgi/2.2.10 mod_perl/1.25 mod_oprocmgr/1.0 configured -- resuming
normal operations
[Thu Apr 18 17:12:18 2002] [warn] OPM: EW process rp5400:0 (pid:9811) died,
restarting.
[Thu Apr 18 17:12:18 2002] [warn] OPM: ADM: process 9810 created server process
9819 (group group1, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:18 2002] [warn] OPM: EW process rp5400:0 (pid:9812) died,
restarting.
[Thu Apr 18 17:12:18 2002] [warn] OPM: ADM: process 9810 created server process
9820 (group group2, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:21 2002] [warn] OPM: EW process rp5400:0 (pid:9819) died,
restarting.
[Thu Apr 18 17:12:21 2002] [warn] OPM: ADM: process 9810 created server process
9821 (group group1, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:21 2002] [warn] OPM: EW process rp5400:0 (pid:9820) died,
restarting.
[Thu Apr 18 17:12:21 2002] [warn] OPM: ADM: process 9810 created server process
9822 (group group2, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:23 2002] [error] OPM:Can not find one alive process
[Thu Apr 18 17:12:23 2002] [error] OPM:Can not find one alive process
[Thu Apr 18 17:12:24 2002] [warn] OPM: EW process rp5400:0 (pid:9821) died,
restarting.
[Thu Apr 18 17:12:24 2002] [warn] OPM: ADM: process 9810 created server process
9824 (group group1, module JServ), and inserted in proctable as entry 0
Any idea?
ThanksHi -
I was wondering if you solved this problem. I had the exact same issue on Win2K after I installed the Java Portlet Development Kit. Now my Apache JServ does not work.
This is a sample of my error_log:
[Fri Jun 07 10:48:01 2002] [notice] FastCGI: process manager initialized
[Fri Jun 07 10:48:08 2002] [error] OPM:Can not find one alive process
[Fri Jun 07 10:48:08 2002] [error] [client 127.0.0.1] File does not exist: /servlet/IsItWorking
[Fri Jun 07 10:51:22 2002] [warn] OPM: ADM: Process 380 terminated using SIGTERM successfully
I have re-checked my jserv.properties, jserv.conf, zone.properties several times and I can't see the problem. I tried to manually remove the entire PDK and go back to my original state (I saved a copy of all my config files) but it still doesn't work.
Did you find a way to fix this?
Thanks!!!
Heather -
Windows update does not work after using System recovery disk
I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
Intel Rapid Storage Technology
-Jerry -
Software Update doesn't work after new SSD install
I just installed a new SSD into my five year old MacBookPro (CoreDuo). I am taking the opportunity to reinstall from the ground up, getting rid of a lot of the cruft I've gathered over the years. I installed 10.6 fresh from the DVD and then ran software update. I could update iTunes, Airport, etc, but couldn't run the 10.6.6 combo updater. I was told that the file was corrupted during download and wouldn't expand.
I downloaded the standalone combo updater from the website and that worked fine. However, when I went to install the drivers for my printers via the System Preferences function, I get the same error. Is there a setting or something that I missed?In 10.6.8 Apple won't allow Mac's to connect to WEP Encrypted networks, and won't reconnect to "hidden" networks automatically.
Use a Ethernet cable until you can change the WIFI
WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots -
Pacman doesn't work after fresh install
Hi everyone, I just installed archlinux on my very old 400Mhz Dell Latitude, but now pacman won't do anything, I can't sync, I can't install anything, ... The install did have some issues, but I'm not sure if that is causing this
The output from 'pacman -Sy'
:: Synchronizing package databases...
error: failed to synchronize core:
error: failed to synchronize extra:
error: failed to synchronize commutity:
error: failed to synchronize any databases
The pacman log doesn't say anything interesting, the configs look okay. That output is spit out rather quickly too, I'm not sure if it's even trying to use the internet (which is working)
Can you help me?
Last edited by Zuliani (2008-04-16 05:43:26)error: failed to synchronize core:
error: failed to synchronize extra:
error: failed to synchronize community:
error: failed to synchronize any databases
debug: config: attempting to read file /etc/pacman.conf
debug: config: new section 'options'
debug: config: HoldPkg: pacman
debug: config: HoldPkg: glibc
debug: config: new section 'core'
debug: setlibpaths() called
debug: option 'cachedir' = /var/cache/pacman/pkg/
debug: registering sync database 'core'
debug: opening database 'core'
debug: opening database from path '/var/lib/pacman/sync/core/'
debug: config: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server to database 'core': protocol 'ftp', server 'locke.suu.edu', path '/linux/dist/archlinux/core/os/i686'
debug: adding new server to database 'core': protocol 'ftp', server 'ftp.belnet.be', path '/mirror/archlinux.org/core/os/i686'
debug: serverlist flushed for 'core'
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'extra'
debug: registering sync database 'extra'
debug: opening database 'extra'
debug: opening database from path '/var/lib/pacman/sync/extra/'
debug: config: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server to database 'extra': protocol 'ftp', server 'locke.suu.edu', path '/linux/dist/archlinux/extra/os/i686'
debug: adding new server to database 'extra': protocol 'ftp', server 'ftp.belnet.be', path '/mirror/archlinux.org/extra/os/i686'
debug: serverlist flushed for 'extra'
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'community'
debug: registering sync database 'community'
debug: opening database 'community'
debug: opening database from path '/var/lib/pacman/sync/community/'
debug: config: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server to database 'community': protocol 'ftp', server 'locke.suu.edu', path '/linux/dist/archlinux/community/os/i686'
debug: adding new server to database 'community': protocol 'ftp', server 'ftp.belnet.be', path '/mirror/archlinux.org/community/os/i686'
debug: serverlist flushed for 'community'
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.conf
debug: registering local database
debug: opening database 'local'
debug: opening database from path '/var/lib/pacman/local/'
:: Synchronizing package databases...
debug: failed to get lastupdate time for core
debug: failed to sync db: [0]
debug: returning error 51 from alpm_db_update : unexpected error
debug: failed to get lastupdate time for extra
debug: failed to sync db: [0]
debug: returning error 51 from alpm_db_update : unexpected error
debug: failed to get lastupdate time for community
debug: failed to sync db: [0]
debug: returning error 51 from alpm_db_update : unexpected error
debug: closing database 'local'
debug: unregistering database 'local'
debug: closing database 'core'
debug: unregistering database 'core'
debug: closing database 'extra'
debug: unregistering database 'extra'
debug: closing database 'community'
debug: unregistering database 'community'
Looks like my databases aren't good, how do I fix this? -
Software update doesn't work after 10.6 upgrade
After upgrading to 10.6, software update says "server won't respond". i.e.:
Multiple locations. 20" intel iMac. OSX 10.6.8. I've tried each location and
same results. How to configure SW Upd.?In 10.6.8 Apple won't allow Mac's to connect to WEP Encrypted networks, and won't reconnect to "hidden" networks automatically.
Use a Ethernet cable until you can change the WIFI
WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots -
Touch ID doesn't work after ios 7.1.1 update
Touch id doesn't work after ios 7.1.1 update..
Why????After IOS update, you first have to use passcode.
Passcode is needed when
After restarting your iPhone 5s
When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
To enter the Touch ID & Passcode setting -
Why tethering with USB cable doesn't work after IOS6.0 update?
why tethering with USB cable doesn't work after IOS 6.0 update?
Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot
-
Fit the window with mouse doesn't work after new update 10.9.2
Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)
Doesn't anyone having this issue?
-
Condition doesn't work after transport to QAS system.
Hi all:
the condition doesn't work after the workflow transported to QAS system. the workflow designed has a constraint that only the creation of the document of Type M4 can trigger the workflow, but creation of Type M5 document can also trigger the workflow, could you please tell me the possible reason?
Thank you very muchHi,
Once Try checking as pavan suggested whether the Customizing requested is transported.
To Maintain Workflow start conditions you can also maintain through SWB_COND and ensure its transported.
Regards
Narin -
My SuperDrive doesn't work after Lion update
My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
ThanksI too have had the problem since updating to Lion. My superdrive isn't even recognized. I have repaid hard disk permissions and also reset PRAM. Sure wish I had a fix.
-
My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,
Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
Thanks,
eidnolb -
My E-Mail Accounts Pop3 doesn´t work after update Lion
My E-Mail Accounts Pop3 doesn´t work after update Lion.
Same here,and Apple support did not have a solution!!
-
Imessage doesn't work after the installation of the update 6.0
imessage doesn't work after the installation of the update 6.0
iMessage will not work until it's activated.
Switch iMessage OFF. Double tap Home button and delete Messages in multitask-bar.
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.
Switch iMessage back ON.
Maybe you are looking for
-
How can I stop Firefox from opening a new Tab as Babylon Search?
So I recently downloaded Babylon (for an offer), and Babylon search started to open when I open a new Tab. I've uninstalled the Babylon program and the Search Add-On, but it still keeps on opening. is there any possible way that I can fix this? I wan
-
SAP problem with Windows Vista
I have purchased a Laptop with Windows Vista OS having Internet explorer 7.0 and loaded SAP GUI 6.40 with patch 20. I am facing the following problems: 1. Not able to execute CJ20N transaction 2. Heirarchy reports are not showing column descriptions
-
As I'm starting to explore GB;any negatives to store audio tracks to a DVD;since there's a lot more space? Just for a true back -up copy any caveats? thanks!
-
I have a number of documents that are quite long. In Pages I have always put the page no. in the footer. In Pages 5.0 thsi comes out looking like a number of letter superimposed on each other. I have tried deleteing and redoing in the old doc to no a
-
HI plese Help me out - get filename from filepath
Hi C:\users\satish\desktop\inflow\documentation.txt I have a requirement to get file names like documentation satish reddy