Microsoft Virtual Academy is displayed in French :(((

Hello,
I don't speak French and the official language in the country that I live (Mauritius) is English. And whenever I go on
www.microsoftvirtualacademy.com it is displaying the page in French instead of English WITHOUT POSSIBILITY TO CHANGE LANGUAGE! Am I banned from Microsoft Virtual Academy only because I live in a country where
the local Microsoft office prefers another language than the official language? I REFUSE to learn French
Please Advice

The only choice you have is to set your country to "Not Listed Country" as according to web resources, although English is spoken in Mauritius, the official language is French therefore it appears Microsoft have used this.
You could also reach out to MVA via
https://www.facebook.com/MVALatinoamerica?fref=tsor
[email protected] and ask them to implement an English version for your country.
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCPD, MCSD, MCSA, MCITP, MCDBA
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

Similar Messages

Unable to Login Microsoft Virtual Academy Home page

Hi !
It might not be relevant in here to ask, but i am Unable to Login Microsoft Virtual Academy Home page since last 4 months. Have tried FireFox, Chrome & IE with Win 7 & Win Xp & Win 2003. But not being able to login with any of the combinations.
Error Message : Our server is having a problem. We're working to fix it as soon as we can, so try again in a few minutes.
I didn't find a way how to contact MVA, may be i need to involve Ed with them, but i know he is already too busy with the Forums. So can anybody provide me link to concerned MVA person or may be forward this to him / her.
Thanks, Hasham Niaz

I thought I'd just suggest a few more ideas.
Right-click IE and Run as Administrator.
Install Silverlight in your web browser. Get it here:
http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx If it won't install, maybe you are not running it as Administrator.
Make sure you are not automatically logged in with another Live ID account, such as Outlook.com, Hotmail.com, Office 365, or cached credentials in Windows. Here is how:
http://windows.microsoft.com/en-US/windows7/Remove-stored-passwords-certificates-and-other-credentials
Perhaps just create and use a new Hotmail account.
See if someone else who can log into the site can use your machine.
If you know someone who can log onto site, see if you can log in on their machine.
Good luck!
Best wishes, Davin Mickelson

Microsoft Virtual Academy - Building Linux-Based Solutions on Azure, Jump Start

Building Linux-Based Solutions on Azure Jump StartJuly 14, 2015 9am‒1pm PDT4pm-8pm GMT (5pm-9pm UK BST)
Do you run an open-source infrastructure? Want a public cloud solution that fits your environment? Join Senior Technical Evangelist Rick Claus and four engineers from the Azure Compute team for this live event, and see how easy and efficient it is to build Linux-based solutions on Microsoft Azure. (In fact, 20% of virtual machines that run on Azure run Linux!)
Explore options you can use to build, deploy, and manage your Linux infrastructure on Azure. Learn how they work and how to support, build, and scale them, along with how to make them available to Devs. See technical demos, and examine open-source tools, such as Docker containers, to manage DevOps pipelines on Azure and to dramatically increase productivity. Plus, walk through...
This topic first appeared in the Spiceworks Community

This is the second Flash Player zero-day in a week and cyber-criminals are going to once again capitalize on it.Categories: ExploitsTags: 0dayFlash Playerhacking teamzero dayzeroday(Read more...)
Read More

Microsoft Virtual Academy. Know it Prove it.

I'm doing the "Identity & Access Management" on the Know it. Prove it. challenge on MVA. I'm on
my last module "Defense in Depth: Windows 8.1 Security" and when I click on the "Take Assessment" this error comes up.
An error has occured Error
code: 635603599104851988
We have already been
notified of this error and we'll solve it shortly.
Sorry for the inconvenience.
It
happened on sunday evening and I'm still struggling with it. Is it going to be fixed soon, so I can finish this module before the challenge runs out.
Identity & Access Management
Identity & Access Management

This forum is visited by common users like you, not by Microsoft personnel, so we cannot provide you with any insider information as to how or when the errors in the MVA might be fixed.
However, the MVA pages provide a link for suggestions and feedback, which might be your best choice for reporting this error and finding information about its resolution. The link points to the MVA fórum:
http://trainingsupport.microsoft.com/en-us/tcmva/forum

OEL On Microsoft Virtual PC

I am trying to install OEL 5.3 on Microsoft Virtual PC (Vista, 64 bit). However, there is something wrong with the display settings. The display is illegible, and I cannot figure out how to force a specific display setting. I think the problem is that that OEL is defaulting to a color depth of 24 bit, and Virtual PC is expecting 16 bit. I can get an installation to complete using the non-gui installation, but when I do that, I cannot get the mouse to work after completing the installation. How do I set the OEL color depth and video card when I run the initial installtion? I have tried using the noprobe option, but no luck

Pls see the below links
http://ubuntuforums.org/showthread.php?t=532020
http://www.aspdeveloper.net/Virtual_PC/rn-739-44736_Virtual_PC_2007___Screen_resolution_workaround.aspx
http://support.microsoft.com/kb/922897
Hope this helps.
http://www.oracleracexpert.com
[Click here to learn Oracle data pump export/import with examples.|http://www.oracleracexpert.com/2009/08/oracle-data-pump-exportimport.html]
Click here to [Download oracle 8i, 9i, 10g and 11g Database|http://www.oracleracexpert.com/2009/08/download-oracle-8i-9i-10g-and-11g_30.html]
Edited by: Satishbabu Gunukula on Sep 23, 2009 2:25 PM

Microsoft Virtual Machine Converter 3.0 throws Cannot Enumerate Disk ERROR

I am running the Microsoft Virtual Machine Converter 3.0 to migrate Windows 2012 R2
SP1 virtual machine from VMware on to Microsoft Azure. I followed all the pre-requisites of the tool. But, when I run the MVMC 3.0 tool it fails in the Analyze Disk stage, and displays this error below:
10/14/2014 16:24:18 -07:00 [3] VERBOSE: Analyzing disk C:\azure_storage\MVMC\0\disk-1.vhd
10/14/2014 16:24:23 -07:00 [3] VERBOSE: Disk C:\azure_storage\MVMC\0\disk-1.vhd is bootable
10/14/2014 16:24:30 -07:00 [3] VERBOSE: Microsoft.Accelerators.Mvmc.Engine.DiskCopyFailureException:
The virtual disk(s) attached to the source virtual machine were not successfully converted to VHD(s) and copied to the workspace folder path. ---> Microsoft.Accelerators.Mvmc.Engine.VolumeMvmcException: Could not enumerate volume with disk number "1".
at Microsoft.Accelerators.Mvmc.Engine.Volume.WinVolumeFinderService.GetWinPaths(UInt32
diskNumber)
at Microsoft.Accelerators.Mvmc.Engine.InjectionRejection.FirewallUpdater.UpdateFirewallRules(IOwnedVirtualDisk
virtualDisk, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PostConversionTouchupService.UpdateFirewallRules(String
bootDiskPath, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
--- End of inner exception stack trace ---
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
10/14/2014 16:24:30 -07:00 [3] EXCEPTION: Microsoft.Accelerators.Mvmc.Engine.DiskCopyFailureException:
The virtual disk(s) attached to the source virtual machine were not successfully converted to VHD(s) and copied to the workspace folder path. ---> Microsoft.Accelerators.Mvmc.Engine.VolumeMvmcException: Could not enumerate volume with disk number "1".
at Microsoft.Accelerators.Mvmc.Engine.Volume.WinVolumeFinderService.GetWinPaths(UInt32
diskNumber)
at Microsoft.Accelerators.Mvmc.Engine.InjectionRejection.FirewallUpdater.UpdateFirewallRules(IOwnedVirtualDisk
virtualDisk, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PostConversionTouchupService.UpdateFirewallRules(String
bootDiskPath, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
--- End of inner exception stack trace ---
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.<>c__DisplayClass3.<ConvertToDrivesAsync>b__2()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
10/14/2014 16:24:30 -07:00 [3] Exception caught : Microsoft.Accelerators.Mvmc.Engine.VolumeMvmcException:
Could not enumerate volume with disk number "1".
at Microsoft.Accelerators.Mvmc.Gui.Model.ConversionModel.ConvertGuestMachine()
at Microsoft.Accelerators.Mvmc.Gui.ViewModels.Machine.MachineCompletionViewModel.OnWorkerDoWork()

Same issue here. We DID have spanned disk over 2 x VMDKs but I have fixed that issue now and problem persists. The one thing I have yet to try is installing VMWare Tools - they were uninstalled on a previous failed conversion and I am getting an error saying
"VERBOSE: Microsoft.Accelerators.Mvmc.Engine.DiskCopyFailureException: The virtual disk(s) attached to the source virtual machine were not successfully converted to VHD(s) and copied to the workspace folder path. ---> Microsoft.Accelerators.Mvmc.Engine.DisablingNonWindowsGuestVHDException:
The virtual hard disk C:\Temp\MVMC\0\disk-0.vhdx on which you are trying to disabling VMWare tools, is not a valid Windows-guest OS virtual hard disk. (Are you trying to disable a virtual hard disk with Linux-guest or other OS in it?)"
I am about to install the tools and try again under advice from our partner

Device Manager in Win: Does Microsoft Virtual WiFi MiniPort Adapter Matter?

I'm a novice user just wondering about configuring devices in Windows 7 bootcamp partition.
My Apple iMac computer shows as a device in the Windows device manager with a yellow exclamation mark.
The driver is Microsoft Virtual WiFi Miniport Adapter.
The error is "device is not working properly because Windows cannot load the drivers required for this device. (Code 31)'.
Attempting to troubleshoot, by updating the driver doesn't solve the problem, as Windows can't automatically locate the driver.
However nothing seems to be actually functioning wrong - internet connectivity and wifi connections are stable and the partition is accessible.
I'm also using MacDrive 8 to access my Mac drives from Windows, again this seems to be working smoothly.
Can I just ignore this as one of the quirks of Bootcamp 3.2?
I have my PhD work on the Windows side so just wanting to be sure I can safely ignore the problem.
I've asked this question in the Intel iMac forum, wihtout any luck, just thought other Bootcamp users might be able to shine some light on the issue?
In detail:
Bootcamp; 3.2
Win OS: Windows 7 Enterprise 64-bit
Mac OS: 10.6.7
Computer: Intel Core Duo 3.06GHz 8 GB RAM
Installed Driver Date and Version: 21/06/2006 and 6.1.7600.16385

Hi,
If they remained after uninstall from device manager, run these commands with administrator privilege:
netsh wlan stop hostednetwork
netsh wlan set hostednetwork mode=disallow
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have upgrade to Ios5 but after the installation was complete I found that the App Store and Itune are displayed in French version

I have upgrade to Ios5 English version but after the installation was complete I found that the App Store and Itune are displayed in French version.

But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.

Archlinux on Microsoft Virtual Server - installs but doesn't boot

Hi all,
I'm trying to sneak Arch into our organization, but as we're very Windows-focussed it may take some time. I thought I would be able to install it as a virtual machine on our Virtual Server, but I haven't had any luck.
The system seemed to install fine, but when I restart the machine and take out the virtual CD it just sits there with a blank screen, but using 97% CPU.
Here's how I installed the system:
Physical machine: Core II Duo 2GHz running Windows Vista 32-bit, with 2GB memory and a 120GB IDE drive.
1) Setup a virtual machine - it has 256MB memory, and a 100GB dynamically-expanding IDE virtual hard disk.
2) Attached the Don't Panic 2007.08 BASE ISO to the Virtual Machine, and started her up.
3) Started the installer with arch ide-legacy. This is because I've run through this install a few times now and without this option it complains that it can't read from /dev/null a lot and that it has trouble writing to VHD.
4) Did an auto-prepare and selected all of the defaults to partition the virtual hard disk.
5) Selected all of the base packages and installed them.
6) Did the "configure system", and left everything as the defaults except setting the root password.
7) Installed the kernel, again leaving the defaults in the config file.
8) Installed the bootloader. Last time I used GRUB, but it sat there saying it was installing for over 2 hours. This time I tried LILO and it installed in less than a few seconds.
After all that was done I exited the installer and did a reboot. Now it sits at 97% CPU usage constantly and shows nothing but a blank screen. Using ALT+F1-F5 shows nothing.
Microsoft Virtual Server has support for the Red Hat and other distributions so I would have expected ArchLinux to work. Has anyone else had success in getting Arch to run on Virtual Server? And is there anything I did wrong in my installation?
Cheers,
Paul

Well, according to this virtual pc 2004 supports archlinux 0.7.1 and 0.7.2 .
They claim virtual server 2005 uses the same core as virtual pc 2004 , so it should work.
Try installing with one of the previous isos, see ftp://ftp.archlinux.org/iso .

Running SAP on Microsoft Virtual Servers

Is anyone running SAP on Microsoft Virtual Servers? If so, what has been your experience with this? We are installing NetWeaver 2004s on three virtual servers (running on the same Physical Windows server). We are using the Microsoft Virtual Server software (not VM Ware).
Thanks in advance for any information.

Check Note 674851 - Virtualization on Windows:
VMware, GSX Server, VMware workstation, Microsoft Virtual Server
Due to their restriction to 32-bit, single CPU and host/guest operation, these virtualization products are not suitable for productive SAP applications.
It may be advisable to use one of these products to operate non-production systems (demo systems, test systems, development systems and so on).
I would not use Microsoft Virtual Server for productive installations, additionally, depending on the database used, it may or may not supported by the database vendor and thus also may or may not supported by SAP.
In worst case you will need to reinstall the application on a non-virtualized environment and reproduce a problem there before SAP support will accept the problem.
Markus

Solaris 10 5/08 x Microsoft Virtual PC

I have tried to install Solaris 10 5/08 on Microsoft Virtual PC, but after selecting Solaris on first screen I have received this message:
WARNING: Time of Day clock error: reason [Stalled]. -- Stopped tracking Time Of Day clock.
Does anyone know how to solve?
Thanks,

ive seen clock issues on linux under vmware and found this off this link [http://www.vmware.com/products/beta/esx-vc/knownissues.html]
Solaris warning "Stopped tracking Time of Day clock"
Description: Solaris might report one of the following messages:
WARNING: Time of Day clock error: reason [Stalled].
-- Stopped tracking Time Of Day clock.
WARNING: Time of Day clock error: reason [Jumped].
-- Stopped tracking Time Of Day clock.
Workaround: The warnings are harmless, and you can simply ignore them. Alternatively, you can, do the following:
1. suppress them by adding the following line to /etc/system in your VM:
set tod_validate_enable = 0
2. Install VMware Tools in your virtual machineand turn on time synchronization to ensure that time is accurate.
for sure since this is msft stuff, you cant do step 2

Microsoft Virtual Machine Converter VMware To Hyper-V Cluster

I'm not sure if this should technically be in the clustering section but I have just moved from SCVMM 2012 SP1 to 2012 R2 and I kinda miss the built-in converter tool. What I used to do when converting VMware to Hyper-V was uninstall VMware Tools and then
I would do a physical to virtual conversion on the VMware virtual machine and SCVMM would handle copying the virtual machine while it was online and register it in our Hyper-V cluster. Now, the only thing I could come up with is the Microsoft Virtual Machine
Converter but it seems rather limited and doesn't seem to have an option to import to a cluster. So is the only option to convert it over to Hyper-V as if it were a local machine and then run another export/import process to get it in the cluster? I tried
to point it to a CSV and while it copied the disk over, it registered the virtual machine in ProgramData (the default location). This obviously causes issues when trying to make the VM highly available. Any one have a suggested process of the best way to go
about this? Thank you in advance for your time!

So no matter what option I choose, V2V always shuts down the source VM during the conversion process. On the other hand, if I use the old method of uninstalling VMware tools manually and then doing a P2V instead, the source VM has to stay online for
that type of process. Then I just have to migrate it to become highly available and that seems to accomplish what I want. The only annoying part is that I couldn't run it on my Win 8.1 Pro workstation as it requires the BITS feature to be installed
and that only appears to be available on server editions (correct me if there is a way to get it on 8.1). I guess the documentation (I think) says that it should run on server editions only but V2V runs fine from 8.1 since it doesn't need BITS since it's
an offline process.

Microsoft Virtual PC 2004

Hi,
I am a new Mac user and have Word, Excel and PP on my powerbook but do not know if I have "Microsoft Virtual PC 2004." I am going to take online courses at a university and I am told I need this. How can I check to see if I have this? I performed a search in spotlight but nothing came up. Thank you so much for your help

On the contrary, Microsoft Office 2004 Professional does come with a copy of Virtual PC with Windows XP Professional. So if a person goes to the store that sells the Mac version of Office, in the Black Box, you get a copy of VPC 7. Here's a link just for proof...http://www.microsoft.com/mac/products/office2004/howtobuy/howtobuy.aspx?pid=howt obuy
It's best to research before answering a question that is not true.
Dale

Microsoft Virtual PC 2007

Hello, I was wondering if I install a clean version of Windows XP using bootcamp, will I be able to install Microsoft Virtual PC 2007 on it? I've been reading that this cannot work on the Intel chip. Please let me know as I am interested in purchasing the MacBook, but I also need to do DEV on the machine, thus I need to us MC VPC 2007.
Thanks.

welcome to macbook forum.
it should work just fine since boot camp with XP or vista, will act as a PC laptop.
But the problem might be when you have to select the partition for installing your other guest OS, unless you point that guess OS (win 2000, another XP or else) to external HD if virtual PC support guess os from external connection.
Good Luck.

Installing Arch in Microsoft Virtual PC 2007 SP1

Firstly, I'm very new to linux and am looking to try out as many distros as possible before deciding on which one to learn from. I want a simple but powerful distro which has minimal packages which will allow me to develop a system myself, learning how the OS works along the way. Arch linux looks like the one.
I've tried to install from the ftp iso "archlinux-2009.02-ftp-i686" onto Microsoft Virtual PC 2007 SP1 on my Pentium 4 3.4GHz PC. I get a "Kernal panic - not syncing: Attempting to kill the idle task! message" after a message "unknown_bootoption+0x0/0x1db", a hex dump and "EIP: [<c010982c>] text_poke_early+0x4c/0x70 SS:ESP 0068:c042fe90" message.
Don't know whether this means anything or I've missed something obvious. Does anyone have an experience of this type of install? Have I downloaded the wrong ISO?
Thanks for any help anyone can give me.

Arch does seem to have a few issues when running in a VM. More so than when using actual metal.
That should be the correct CD.
I never had much luck with MS Virtual PC. Maybe try VirtualBOX from Sun?
I don't know if your pentium 4 has support for hardware virtualisation. Without hardware support the performance will be less than impressive and I found I had more issues without hardware virtualisation when running vms.

Microsoft Virtual Academy is displayed in French :(((

Similar Messages

Maybe you are looking for