Microsoft Virtual Machine & No object for moniker error

Hi all,
I am trying to access java object from my ASP pages that are running on IIS4.0 i currently have only sun's VM .
when i try to access the java object from the ASP , i get a
"No object for moniker error". IIS is not able to find my java classes.
on doing some research i came to the conclusion that i need a microsoft VM in order to talk to my java classes through ASP.I have installed Microsoft Java SDK4.0, but still have no luck. Do i need to install the microsoft VM even after i installed teh SDk?
the other issue is will there be conflicts if i have both Sun' JVM and Microsoft JVM on the same machine.
I will appreciate all solution
thanks in advance
Namrata

Jeez - Found the solution to this. I was having the problem that any Java classes I created and then copied to C:\WINDOWS\java\trustlib were generating the error: "Error Type:(0x800401E5) No object for moniker ". I found that Java classes compiled with the 1.4.x compiler will not work on IIS within an ASP page using the construct: "Set obj = GetObject(java:my_java_class)". When I compiled the exact same code using the javac from 1.3.1 it works! I know of no method of getting Java code that uses methods specific to 1.4.x to work. Luckily the code I was posting to the server doesn't require any of these features. My assumption is that Microsoft is looking at the version of compiler that created the Java class and then throws an error if the compiler is greater than 1.3.x.

Similar Messages

  • Microsoft Virtual Machine Converter 3.0 throws Cannot Enumerate Disk ERROR

    I am running the Microsoft Virtual Machine Converter 3.0 to migrate Windows 2012 R2
    SP1 virtual machine from VMware on to Microsoft Azure. I followed all the pre-requisites of the tool. But, when I run the MVMC 3.0 tool it fails in the Analyze Disk stage, and displays this error below:
    10/14/2014 16:24:18 -07:00 [3] VERBOSE: Analyzing disk C:\azure_storage\MVMC\0\disk-1.vhd
    10/14/2014 16:24:23 -07:00 [3] VERBOSE: Disk C:\azure_storage\MVMC\0\disk-1.vhd is bootable
    10/14/2014 16:24:30 -07:00 [3] VERBOSE: Microsoft.Accelerators.Mvmc.Engine.DiskCopyFailureException:
    The virtual disk(s) attached to the source virtual machine were not successfully converted to VHD(s) and copied to the workspace folder path. ---> Microsoft.Accelerators.Mvmc.Engine.VolumeMvmcException: Could not enumerate volume with disk number "1".
    at Microsoft.Accelerators.Mvmc.Engine.Volume.WinVolumeFinderService.GetWinPaths(UInt32
    diskNumber)
    at Microsoft.Accelerators.Mvmc.Engine.InjectionRejection.FirewallUpdater.UpdateFirewallRules(IOwnedVirtualDisk
    virtualDisk, TaskContext taskContext)
    at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PostConversionTouchupService.UpdateFirewallRules(String
    bootDiskPath, TaskContext taskContext)
    at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
    machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
    --- End of inner exception stack trace ---
    at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
    machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
    10/14/2014 16:24:30 -07:00 [3] EXCEPTION: Microsoft.Accelerators.Mvmc.Engine.DiskCopyFailureException:
    The virtual disk(s) attached to the source virtual machine were not successfully converted to VHD(s) and copied to the workspace folder path. ---> Microsoft.Accelerators.Mvmc.Engine.VolumeMvmcException: Could not enumerate volume with disk number "1".
    at Microsoft.Accelerators.Mvmc.Engine.Volume.WinVolumeFinderService.GetWinPaths(UInt32
    diskNumber)
    at Microsoft.Accelerators.Mvmc.Engine.InjectionRejection.FirewallUpdater.UpdateFirewallRules(IOwnedVirtualDisk
    virtualDisk, TaskContext taskContext)
    at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PostConversionTouchupService.UpdateFirewallRules(String
    bootDiskPath, TaskContext taskContext)
    at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
    machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
    --- End of inner exception stack trace ---
    at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
    machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
    at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.<>c__DisplayClass3.<ConvertToDrivesAsync>b__2()
    at System.Threading.Tasks.Task`1.InnerInvoke()
    at System.Threading.Tasks.Task.Execute()
    10/14/2014 16:24:30 -07:00 [3] Exception caught : Microsoft.Accelerators.Mvmc.Engine.VolumeMvmcException:
    Could not enumerate volume with disk number "1".
    at Microsoft.Accelerators.Mvmc.Gui.Model.ConversionModel.ConvertGuestMachine()
    at Microsoft.Accelerators.Mvmc.Gui.ViewModels.Machine.MachineCompletionViewModel.OnWorkerDoWork()

    Same issue here. We DID have spanned disk over 2 x VMDKs but I have fixed that issue now and problem persists. The one thing I have yet to try is installing VMWare Tools - they were uninstalled on a previous failed conversion and I am getting an error saying
    "VERBOSE:    Microsoft.Accelerators.Mvmc.Engine.DiskCopyFailureException: The virtual disk(s) attached to the source virtual machine were not successfully converted to VHD(s) and copied to the workspace folder path. ---> Microsoft.Accelerators.Mvmc.Engine.DisablingNonWindowsGuestVHDException:
    The virtual hard disk C:\Temp\MVMC\0\disk-0.vhdx on which you are trying to disabling VMWare tools, is not a valid Windows-guest OS virtual hard disk. (Are you trying to disable a virtual hard disk with Linux-guest or other OS in it?)"
    I am about to install the tools and try again under advice from our partner

  • JCOM:No object for Moniker

    I have a JCOM server running in a Solaris system.
    When I ran a simple client from a Windows machine in the same network I am able
    to access the Java objects in the WLServer.
    But When I try to run the simple client(VB) from another network,I get the following
    error message
    Runtime error
    AutoMation error.
    No object for moniker
    The Port in the JCOM server and CLient are OPEN.
    Any suggestions?
    Thanks
    Montfort.

    The Good News:
    You don't have to register the Java class if you use the following method to invoke an Java class from ASP:
    set obj = getObject("java:your_java_class")
    Your Java class must first be copied to "root_drive:\WINDOWS\java\trustlib". If you recopy the file, you will have to stop/restart IIS before the changes are accepted.
    The Bad News:
    I was having the problem that any Java classes I created and then copied to C:\WINDOWS\java\trustlib were generating the error: "Error Type:(0x800401E5) No object for moniker ". I found that Java classes compiled with the 1.4.x compiler will not work on IIS within an ASP page using the construct: "Set obj = GetObject(java:my_java_class)". When I compiled the exact same code using the javac from 1.3.1 it works! I know of no method of getting Java code that uses methods specific to 1.4.x to work. My assumption is that Microsoft is looking at the version of compiler that created the Java class and then throws an error if the compiler is greater than 1.3.x.

  • 22591 The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object. Ensure that the computer name is unique in the VMM environment, and then try again.

    Hello everyone,
    I recently bummed into an error message when I want to deploy a service template.
    Setup:
    1 HyperV server on win2k12 r2
    1 SCCM VMM 2k12r2 on the hyperv server
    1 template with all the objects in the library
    Error:
    When I deploy the the service template I get the below error message.
    22591
    The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object.
    Ensure that the computer name is unique in the VMM environment, and then try again.
    The issue is that I can't find it anywhere, not on my domain controller not on my dns server as a record and also not as a vm in sccm or in powershell when doing get-vm. So where do I need to remove it ( no it is not an option to create a new Hostname for
    this service template ).
    Andre

    There could be a couple things happening.
    One - you have a Service Template, it defines %Computername% as a variable.  And you have deployed this Template once using 'foo' and you are deploying it again as 'foo' without deleting the previous instance.
    Two - you hardcoded the computer name into the template.
    Three - you are scaling out and you have hit the bug that the wizard does not increment the machinename if you have something like computername## where SCVMM should be incrementing the machine name.
    Windows does not support identically named machines (you can't have two machines on the same network with the same computer name - they broadcast their name and the 'second' one shuts down its network stack).  In support of this SCVMM also enforces
    this rule.
    And with any templates SCVMM is in charge of machine names at deployment.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • ASAP: Serial Versioning and the Microsoft Virtual Machine

    Hi,
    I'm writing an applet and a server that communicate via sockets using Java's serialization interface. The whole thing works fine unless I use IE (which uses Microsofts virtual machine). In the case I get an InvalidClassException with respect to my serialVersionUID. The error says that there is a versioning problem between a class calles "LHands;" which I'm guessing corresponds to my class called "Hands.class", however hardcoding the version ID in "Hands.class" doesn't fix it. My guess is that the applet is serializing the data using the MVM and the server is using Sun VM and is causing the versioning problem. Has anybody encountered anything like this before? I'm stumped, I've already lost three days on this.
    Thanks in advanced,
    Paul

    in case anyones interested I figured it out. Do not try to serialize an array of objects if your in the the situation I described above. Its a lot of headache. Use Vectors instead

  • Microsoft Virtual Machine Converter VMware To Hyper-V Cluster

    I'm not sure if this should technically be in the clustering section but I have just moved from SCVMM 2012 SP1 to 2012 R2 and I kinda miss the built-in converter tool. What I used to do when converting VMware to Hyper-V was uninstall VMware Tools and then
    I would do a physical to virtual conversion on the VMware virtual machine and SCVMM would handle copying the virtual machine while it was online and register it in our Hyper-V cluster. Now, the only thing I could come up with is the Microsoft Virtual Machine
    Converter but it seems rather limited and doesn't seem to have an option to import to a cluster. So is the only option to convert it over to Hyper-V as if it were a local machine and then run another export/import process to get it in the cluster? I tried
    to point it to a CSV and while it copied the disk over, it registered the virtual machine in ProgramData (the default location). This obviously causes issues when trying to make the VM highly available. Any one have a suggested process of the best way to go
    about this? Thank you in advance for your time!

    So no matter what option I choose, V2V always shuts down the source VM during the conversion process. On the other hand, if I use the old method of uninstalling VMware tools manually and then doing a P2V instead, the source VM has to stay online for
    that type of process. Then I just have to migrate it to become highly available and that seems to accomplish what I want. The only annoying part is that I couldn't run it on my Win 8.1 Pro workstation as it requires the BITS feature to be installed
    and that only appears to be available on server editions (correct me if there is a way to get it on 8.1). I guess the documentation (I think) says that it should run on server editions only but V2V runs fine from 8.1 since it doesn't need BITS since it's
    an offline process.

  • RMI and Microsoft Virtual Machine

    Hi everyone,
    I'm currently tring to find a solution for a migration issue to which I'm confronted.
    I have several ActiveX components used in a server context to deliver services to a client.
    I intend to migrate the whole to Java soon but there's a huge amount of work to do.
    I would like to work on this migration progressively. For now, I would like to make a Java Swing Client running in a JRE 1.4 environment. This client is going to connect to a server running in a Microsoft Virtual Machine environment. The client is going to request some stuff to the server and the server is going to obtain the requested info by queryng an ActiveX component (via JActiveX).
    The thing is that I need to do this communication with RMI but I wonder wether RMI is supported in Microsoft's Java Virtual Machine, is it ?
    What would you suggest me to do ?
    Thanx for any help,
    Diego

    I think that IBM's AlphaWorks team has programmed an API to make possible to use Applets that use RMI in InternetExplorer4 interpreted by a Microsoft Virtual Machine. But... is this supposed to allow RMI support only in IE4 or in windows in general ?
    Diego

  • Microsoft Virtual Machine Bus Network Adapter has a yellow !

    Hi in my device manager the Microsoft Virtual Machine Bus Network Adapter ? the Microsoft Virtual Machine Bus Network Adapter has a yellow ! 
    Does anyone know how to fix this?

    Hi 
       Firsly try to run Windows updates and see if it can be detected by Windows update and install apprpriate driver ..
       Secondly if that did not work try to RIGHT click the  Microsoft Virtual Machine Bus Network Adapter and click update driver and choose let Windows look for driver . 
                  Post me your findings 
                                        Checkurtech
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • "This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible.  This host does not support Intel VT-x"

    Hi, I have installed vmware 5.5 hypervisor on hp G8 microserver. I have created one vm as windows 2008 R2. I have also install vmware workstation 11 on this vm. In this workstation when I tried to run vmware 5.5 hypervisor I come across "This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible.  This host does not support Intel VT-x" this statement. Which shows that the host machine does not support virtualization and for that you need to go in Bios and enable it but in present case as host machine is also a vm and you would not find much detail of Bios when you log into the Bios therefore, I am pretty much stuck here. I don't see any information in relation to this. Now my question is:
    1. Can we run ESXi inside a vm which is already sitting on ESXi?

    I moved the discussion from VMware Workstation to Nested Virtualization which contains several hints on what's possible and what needs to be configured to make things work.
    André

  • Microsoft Virtual Machine

    I am looking for jave virtual machine and really not for sure where to go for it. I am trying to get into some sites and they are telling me to download java virtual machine but when I go to the web site to do it, windows tells me it's not there anymore. I am using windows xp.
    Thanks

    I am also looking for jave virtual machine. I am trying to get into some sites and they are telling me to download java virtual machine, but when I go to the web site to do it, windows tells me it's not there anymore. I am using windows xp too. I called microsoft support and they advised that I use google to search for JVM for the company that now offers it. My results didn't post anything clear. I'm asking for help from any reader.
    Thanks

  • Microsoft Virtual Machine Converter Error Converting

    Hi Everyone,
    I'm trying to use MVMC 3.0 on a Windows 2008R2 Server to capture P2V a Windows2008R2.
    The first step went well, but on the second step he trow an error:
    02/03/2015 17:05:05 +01:00 [1] Navigating to the 'Before You Begin' page.
    02/03/2015 17:05:07 +01:00 [1] Moving Forward from the 'Before You Begin' page.
    02/03/2015 17:05:07 +01:00 [1] Navigating to the 'Machine Type' page.
    02/03/2015 17:05:09 +01:00 [1] Moving Forward from the 'Machine Type' page.
    02/03/2015 17:05:09 +01:00 [1] Navigating to the 'Source' page.
    02/03/2015 17:05:19 +01:00 [1] Value of 'MachineName' = 'dc'
    02/03/2015 17:05:19 +01:00 [1] Value of 'UseSessionCredentials' = 'False'
    02/03/2015 17:05:19 +01:00 [1] Pressing Next on the 'Source' page.
    02/03/2015 17:05:19 +01:00 [1] Displaying busy cursor.
    02/03/2015 17:05:19 +01:00 [1] Progress bar visibility changed to 'Visible'.
    02/03/2015 17:05:19 +01:00 [1] Progress message: 'Validating the credentials'.
    02/03/2015 17:05:19 +01:00 [3] Background worker thread started.
    02/03/2015 17:05:50 +01:00 [1] Background task is complete.
    02/03/2015 17:05:50 +01:00 [1] Displaying normal cursor.
    02/03/2015 17:05:50 +01:00 [1] Progress message: ''.
    02/03/2015 17:05:50 +01:00 [1] Progress bar visibility changed to 'Hidden'.
    02/03/2015 17:05:50 +01:00 [1] Moving Forward from the 'Source' page.
    02/03/2015 17:05:50 +01:00 [1] Navigating to the 'System Information' page.
    02/03/2015 17:05:54 +01:00 [1] Displaying busy cursor.
    02/03/2015 17:05:54 +01:00 [4] Background worker thread started.
    02/03/2015 17:05:57 +01:00 [1] Background task is complete.
    02/03/2015 17:05:57 +01:00 [1] Displaying normal cursor.
    02/03/2015 17:06:01 +01:00 [1] Moving Forward from the 'System Information' page.
    02/03/2015 17:06:01 +01:00 [1] Navigating to the 'Volume Configuration' page.
    02/03/2015 17:06:05 +01:00 [1] Moving Forward from the 'Volume Configuration' page.
    02/03/2015 17:06:05 +01:00 [1] Navigating to the 'VM Configuration' page.
    02/03/2015 17:06:12 +01:00 [1] Moving Forward from the 'VM Configuration' page.
    02/03/2015 17:06:12 +01:00 [1] Navigating to the 'Hyper-V Host' page.
    02/03/2015 17:06:19 +01:00 [1] Value of 'MachineName' = 'localhost'
    02/03/2015 17:06:19 +01:00 [1] Value of 'UseSessionCredentials' = 'True'
    02/03/2015 17:06:19 +01:00 [1] Pressing Next on the 'Hyper-V Host' page.
    02/03/2015 17:06:19 +01:00 [1] Displaying busy cursor.
    02/03/2015 17:06:19 +01:00 [1] Progress bar visibility changed to 'Visible'.
    02/03/2015 17:06:19 +01:00 [1] Progress message: 'Validating the credentials'.
    02/03/2015 17:06:19 +01:00 [3] Background worker thread started.
    02/03/2015 17:06:20 +01:00 [1] Background task is complete.
    02/03/2015 17:06:20 +01:00 [1] Displaying normal cursor.
    02/03/2015 17:06:20 +01:00 [1] Progress message: ''.
    02/03/2015 17:06:20 +01:00 [1] Progress bar visibility changed to 'Hidden'.
    02/03/2015 17:06:20 +01:00 [1] Moving Forward from the 'Hyper-V Host' page.
    02/03/2015 17:06:20 +01:00 [1] Navigating to the 'Disk' page.
    02/03/2015 17:06:26 +01:00 [1] Value of 'DestinationMachineSharePath' = '\\localhost\Hyper-V\P2V\DC'
    02/03/2015 17:06:26 +01:00 [1] Value of 'IsFixedDisk' = 'False'
    02/03/2015 17:06:26 +01:00 [1] Moving Forward from the 'Disk' page.
    02/03/2015 17:06:26 +01:00 [1] Navigating to the 'Workspace' page.
    02/03/2015 17:06:44 +01:00 [1] Value of 'WorkspacePath' = 'C:\Hyper-V\P2V\DC'
    02/03/2015 17:06:44 +01:00 [1] Moving Forward from the 'Workspace' page.
    02/03/2015 17:06:44 +01:00 [1] Navigating to the 'Network Configuration' page.
    02/03/2015 17:06:45 +01:00 [1] Moving Forward from the 'Network Configuration' page.
    02/03/2015 17:06:45 +01:00 [1] Navigating to the 'Summary' page.
    02/03/2015 17:06:45 +01:00 [1] Progress message: 'Verifying if conversion can proceed based on inputs'.
    02/03/2015 17:06:45 +01:00 [1] Progress bar visibility changed to 'Visible'.
    02/03/2015 17:06:45 +01:00 [5] Background worker thread started.
    02/03/2015 17:06:45 +01:00 [1] Background task is complete.
    02/03/2015 17:06:45 +01:00 [1] Value of 'SummaryPageConversionWarnings' = ''
    02/03/2015 17:06:45 +01:00 [1] Progress message: ''.
    02/03/2015 17:06:45 +01:00 [1] Progress bar visibility changed to 'Hidden'.
    02/03/2015 17:06:46 +01:00 [1] Moving Forward from the 'Summary' page.
    02/03/2015 17:06:46 +01:00 [1] Navigating to the 'Completion' page.
    02/03/2015 17:06:46 +01:00 [6] Background worker thread started.
    02/03/2015 17:06:46 +01:00 [6] VERBOSE: Starting the P2V conversion.
    02/03/2015 17:06:46 +01:00 [6] VERBOSE: Source physical machine: dc
    02/03/2015 17:06:46 +01:00 [6] VERBOSE: Account used for the source physical : Administrator
    02/03/2015 17:06:46 +01:00 [6] VERBOSE: Target Hyper-V host: localhost
    02/03/2015 17:06:47 +01:00 [6] VERBOSE: Evaluating the P2V conversion request.
    02/03/2015 17:06:47 +01:00 [6] VERBOSE: Evaluating P2V Machine conversion request:
    Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.P2VMachineConversionRequest
    02/03/2015 17:06:47 +01:00 [6] VERBOSE: Destination operating system information:
    Operating System Name: Microsoft Windows Server 2008 R2 Standard
    Version: 6.1.7601
    Service Pack: Service Pack 1,0
    CIMOS Type: 18
    02/03/2015 17:06:48 +01:00 [6] VERBOSE: Copying directly to target Vm folder: False. Disk-to-VHD BITS client machine: HyperV2k8R2, target location C:\Hyper-V\P2V\DC\MVMC\0\.
    02/03/2015 17:06:48 +01:00 [6] VERBOSE: Using https: True.
    02/03/2015 17:06:48 +01:00 [6] VERBOSE: Physical machine drives:
    02/03/2015 17:06:48 +01:00 [6] VERBOSE: Device ID: \\?\Volume{3dd1183e-abbc-11e4-89a5-806e6f6e6963}\. Mounted device value: fc52b87a0000100000000000. Volume Guid: \\?\Volume{3dd1183e-abbc-11e4-89a5-806e6f6e6963}\. IsBoot: True. IsWindows: False.
    02/03/2015 17:06:48 +01:00 [6] VERBOSE: Device ID: C. Mounted device value: fc52b87a0000500600000000. Volume Guid: \\?\Volume{3dd1183f-abbc-11e4-89a5-806e6f6e6963}\. IsBoot: False. IsWindows: True.
    02/03/2015 17:06:48 +01:00 [6] VERBOSE: Device ID: D. Mounted device value: fc52b87a000090fc0a000000. Volume Guid: \\?\Volume{3dd11840-abbc-11e4-89a5-806e6f6e6963}\. IsBoot: False. IsWindows: False.
    02/03/2015 17:06:48 +01:00 [6] VERBOSE: Device ID: E. Mounted device value: fc52b87a0000903117000000. Volume Guid: \\?\Volume{3dd11841-abbc-11e4-89a5-806e6f6e6963}\. IsBoot: False. IsWindows: False.
    02/03/2015 17:06:48 +01:00 [6] VERBOSE: Selected drives:
    02/03/2015 17:06:48 +01:00 [6] VERBOSE: Device ID: \\?\Volume{3dd1183e-abbc-11e4-89a5-806e6f6e6963}\. Mounted device value: fc52b87a0000100000000000. Volume Guid: \\?\Volume{3dd1183e-abbc-11e4-89a5-806e6f6e6963}\. IsBoot: True. IsWindows: False.
    02/03/2015 17:06:48 +01:00 [6] VERBOSE: Device ID: C. Mounted device value: fc52b87a0000500600000000. Volume Guid: \\?\Volume{3dd1183f-abbc-11e4-89a5-806e6f6e6963}\. IsBoot: False. IsWindows: True.
    02/03/2015 17:06:48 +01:00 [6] VERBOSE: Device ID: D. Mounted device value: fc52b87a000090fc0a000000. Volume Guid: \\?\Volume{3dd11840-abbc-11e4-89a5-806e6f6e6963}\. IsBoot: False. IsWindows: False.
    02/03/2015 17:06:58 +01:00 [6] VERBOSE: Source machine image deployment file name: 0.1.0x6400000.1.0x6e5951c.0x0.\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy1
    02/03/2015 17:06:58 +01:00 [6] VERBOSE: Target file name: C:\Hyper-V\P2V\DC\MVMC\0\3dd1183e-abbc-11e4-89a5-806e6f6e6963.vhd
    02/03/2015 17:06:58 +01:00 [6] VERBOSE: Source machine image deployment file name: 0.1.0xaf6400000.0.0x44631e15.0x0.\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy2
    02/03/2015 17:06:58 +01:00 [6] VERBOSE: Target file name: C:\Hyper-V\P2V\DC\MVMC\0\C.vhd
    02/03/2015 17:06:59 +01:00 [6] VERBOSE: Source machine image deployment file name: 0.1.0xc35000000.0.0x5bb32b0e.0x0.\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy3
    02/03/2015 17:06:59 +01:00 [6] VERBOSE: Target file name: C:\Hyper-V\P2V\DC\MVMC\0\D.vhd
    02/03/2015 17:13:07 +01:00 [6] EXCEPTION: System.TypeInitializationException: The type initializer for 'Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver' threw an exception. ---> System.IO.FileNotFoundException: Could not load file or assembly 'System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
    at Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver.Initialize()
    at Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver..cctor()
    --- End of inner exception stack trace ---
    at Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver.Resolve[T](ResolverOverride[] parameters)
    at Microsoft.Accelerators.Mvmc.Engine.Drive.Virtual.Internal.VirtualHardDiskInternal.OpenImpl(String path, VirtualStorageTypeDevice vhdType, VirtualDiskAccessMask access)
    at Microsoft.Accelerators.Mvmc.Engine.Drive.Virtual.VhdVirtualDisk..ctor(String path, FileAccess access)
    at Microsoft.Accelerators.Mvmc.Engine.Drive.Virtual.VirtualDiskBase.GetVirtualDisk(String path, FileAccess access)
    at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PhysicalMachineConversionService.FixupWindowsDrive(String tempDirectory, TaskContext taskContext)
    at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PhysicalMachineConversionService.Fixup(String tempDirectory, IPostProgress fixupDiskPhase, TaskContext taskContext)
    at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PhysicalMachineConversionService.ConvertToMachine(IP2VMachineConversionRequest p2vMachineConversionRequest, TaskContext taskContext)
    at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PhysicalMachineConversionService.<>c__DisplayClass4.<ConvertToMachineAsync>b__3()
    at System.Threading.Tasks.Task`1.InvokeFuture(Object futureAsObj)
    at System.Threading.Tasks.Task.InnerInvoke()
    at System.Threading.Tasks.Task.Execute()
    02/03/2015 17:13:07 +01:00 [6] Exception caught : System.TypeInitializationException: The type initializer for 'Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver' threw an exception. ---> System.IO.FileNotFoundException: Could not load file or assembly 'System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
    at Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver.Initialize()
    at Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver..cctor()
    --- End of inner exception stack trace ---
    at Microsoft.Accelerators.Mvmc.Gui.Model.ConversionModel.ConvertGuestMachine()
    at Microsoft.Accelerators.Mvmc.Gui.ViewModels.Machine.MachineCompletionViewModel.OnWorkerDoWork()
    02/03/2015 17:13:07 +01:00 [1] Background task is complete.
    02/03/2015 17:13:07 +01:00 [1] Conversion error message is displayed.
    02/03/2015 17:13:07 +01:00 [1] Value of 'ErrorMessage' = 'The type initializer for 'Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver' threw an exception.'

    Greetings, I am experiencing same issue. The error log is identical except for the vm name and locations  I need help desperately. I have a deadline to meet up with.  

  • Virtual Machine

    Hello,
    I downloaded Java Runtime Environment v1.4.0_01
    on my C drive in a windows folder. When I try to run it,
    it says that my security settings need to be set to medium.
    I set it to medium and hit apply then refresh as I'm supposed to do.
    But each time it says I need to set it at medium again.
    The real problem is I'm trying to set up a webpage on Homestead.com
    & I got started but needed a virtual machine so I downloaded the above software from Sun.com But everytime I click on the Homestead icon to ( open up )return to build my page it says : "Error : Microsoft Virtual Machine not found Class registry error".
    Can any of you help me please ?
    Thanks,
    Robert

    u know sun has filed a case law one against Microsoft
    in regarding this virtual machine...
    best thing u do is go to microsoft site and downlaod
    a Microsoft's Java Virtual Machine...
    and install it
    thats it...

  • Error when converting VMware virtual machine to Azure with new Virtual Machine Converter 2.0

    Hello
    I'm trying to convert a VMWare virtual machine to Azure with the new Microsoft Virtual Machine Manager 2.0
    The process stops when the disk conversion start. Error log below.
    Thanks for any advice.
    Regards
    Toon
    04/18/2014 14:53:03 +02:00  [9]  VERBOSE:
    This conversion will proceed off-line.
    04/18/2014 14:53:03 +02:00  [9]  VERBOSE:
    The uninstallation of tools is not supported in off-line machine conversion scenarios.
    04/18/2014 14:53:03 +02:00  [9]  VERBOSE:
    NOT preparing source virtual machine, this conversion is being treated as off-line.
    04/18/2014 14:53:03 +02:00  [9]  VERBOSE:
    Downloading VMware virtual disks from source virtual machine
    04/18/2014 14:53:04 +02:00  [9]  VERBOSE:
    System.Net.WebException: The remote server returned an error: (404) Not Found.
       at Microsoft.Accelerators.Mvmc.Engine.ForVMware.ExportLease.GetFiles(IDownloadAdapter adapter, String host, DirectoryInfo dirInfo, TaskContext taskContext)
       at Microsoft.Accelerators.Mvmc.Engine.ForVMware.VirtualMachine.DownloadFiles(IDownloadAdapter downloadAdapter, String toPath, TaskContext context)
       at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
    04/18/2014 14:53:04 +02:00  [9]  VERBOSE:
    Downloading device (/vm-3213/VirtualLsiLogicController0:0) disk-0.vmdk
    04/18/2014 14:53:04 +02:00  [9]  EXCEPTION:
    System.Net.WebException: The remote server returned an error: (404) Not Found.
       at Microsoft.Accelerators.Mvmc.Engine.ForVMware.ExportLease.GetFiles(IDownloadAdapter adapter, String host, DirectoryInfo dirInfo, TaskContext taskContext)
       at Microsoft.Accelerators.Mvmc.Engine.ForVMware.VirtualMachine.DownloadFiles(IDownloadAdapter downloadAdapter, String toPath, TaskContext context)
       at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
       at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.<>c__DisplayClass3.<ConvertToDrivesAsync>b__2()
       at System.Threading.Tasks.Task`1.InnerInvoke()
       at System.Threading.Tasks.Task.Execute()
    04/18/2014 14:53:04 +02:00  [9]  Exception caught : System.Net.WebException: The remote server returned an error: (404) Not Found.
       at Microsoft.Accelerators.Mvmc.Gui.Model.ConversionModel.ConvertGuestMachine()
       at Microsoft.Accelerators.Mvmc.Gui.ViewModels.Machine.MachineCompletionViewModel.OnWorkerDoWork()
    04/18/2014 14:53:04 +02:00  [1]  Background task is complete.
    04/18/2014 14:53:04 +02:00  [1]  Conversion error message is displayed.
    04/18/2014 14:53:04 +02:00  [1]  Value of 'ErrorMessage' = 'The remote server returned an error: (404) Not Found.'
    04/18/2014 14:53:06 +02:00  [1]  Pressing Finish on the 'Completion' page.
    04/18/2014 14:53:06 +02:00  [1]  UI wizard is closing.
    04/18/2014 14:53:06 +02:00  [1]  Message box displays : 'Are you sure you want to exit? Any running jobs will be cancelled and the wizard will close.'.
    04/18/2014 14:53:09 +02:00  [1]  Cancel confirmation prompt was canceled by user.

    Hi,
    Have you found any solution?
    Thanks 
    Alessandro

  • Error while booting a virtual machine

    Hello,
    I have a problem when I try to boot a virtual machine in the web interface :
    "Error changing desktop state: com.sun.vda.service.api.ServiceException: No suitable hosts to start a desktop for Desktop Provider gorilla.cscs.wmin.ac.uk."
    So, I created a pool for my desktop assigned to a desktop provider, then I created a group assigned to my pool, I imported a desktop from the "desktop" tab of the pool menu without problems and when I want to start the machine I get this error.
    Have you got any ideas ?
    Have a nice day.
    PS : Sorry for my english, I am french :)
    Edit : now a different error :
    Error changing desktop state: com.sun.vda.service.api.ServiceException: The desktop ubuntu1 could not be started on host hornbill.cscs.wmin.ac.uk.
    Edited by: tonio7789 on Apr 6, 2010 3:21 AM

    Keep in mind of the following:
    ZFS uses any memory available (up to the limit) for a so-called ARC cache. This can cause issues in a demo setup, because VDI may falsely report that there is not enough memory for starting up any virtual machine. To resolve this issue, adapt the max value used for the ARC cache.
    For example, to restrict the memory to 2GB, add the following line in /etc/system:
    set zfs:zfs_arc_max = 2147483648(Text copied from: [VDI Demo (Featuring Sun VirtualBox)|http://wikis.sun.com/display/VDI3dot1/VDI+Demo+%28Featuring+Sun+VirtualBox%29] )
    - Remold

  • Business Objects on Virtual Machines

    Hi,
    We are setting up new servers for our Business Objects to accomodate the DEV/TEST and PROD environments. Can we use Virtual Machines (VM Servers) for both the DEV/TEST and PROD environments?
    Thanks.

    You cannot escalate performance issues when installed on vmware see this [thread and statement|Is BOXI XI R2 supported on VMWARE ?]
    So production should not be installed on VM's
    Regards,
    Tim

Maybe you are looking for

  • How do I view on my tv what is on my computer

    how do I hook up my computer to my hdtv

  • Why are my web browsers constantly freezing?

    Whether it is safari, firefox, camino or seamonkey, after leaving the browser idle for like 5 minutes while reading a page then clicking a link to visit another page the browser freezes and I must use force quit and restart. This is so frustrating, a

  • ITunes locks up and forces hard reboot while playing video

    I am running iTunes 8.2.1 on an iMac G5 running Leopard 10.5.7. About 80% of the time I watch video through iTunes, regardless of whether or not the video came from the iTunes store or elsewhere, the computer locks up after a few minutes of playback

  • Crash on import function

    LR 4.3 was working perfectly till today when I attempted to import some images. I successfully imported images yesterday but today when I click the Import button the screen goes gray and lightroom shows 'not responding'. I have rebooted, checked for

  • Can I add an Airport Express Card to my Mac mIni?

    If so where can I buy one and does anyone have the link to the OWC website where they show a video on how t oopen a Mac Mini?