Microsoft Windows 2008 Server and RDC

hi:)
We have a fairly serious problem. Many of our customers have a Microsoft Windows Server 2003 running our ASP web solution on that machine. In this web solution we use RDC (crystal) to show reports on the net, which works perfectly. But now a couple of our new customers have installed Microsoft Windows Server 2008 32 bit and 64 bit version. But when we are showing these reports on a Windows Server 2008, the result is not correct. It show a completely wrong result in the reports. This meaning showing 4 timers the records it should do.
Do u support Windows Server 2008 32 bit and 64 bit with RDC (crystal) ?
Have anyone experienced the same problem?
Sincerly Jan Tovgaard, Egdatainform, DK

Hi Jan
CR XI, CR XIR2 and CR 2008 have not been tested with Microsoft Windows Server 2008 and MS Windows Server 2008 would be added to the supported platforms Guide when it is done.
Please refer to the Supported Platforms Guide for CR XI, CR XIR 2, CR 2008 for more information.
Hope this helps!!!
Regards
Sourashree

Similar Messages

Windows 2008 Server and HP Color LaserJet 2605dn Driver Issue when Sharing Printer

I have a HP Color LaserJet 2605dn printer that I need to setup on a Windows 2008 server. I need the server to act as a Print server, but I have been unable to get any drivers to load other than the 64 Bit Universal drivers. Because most of the company uses XP (32 and 64 bit), I also need to load those drivers under additional drivers; however, I have been unable to load them, when I point to the INF file (any of the 10 that unzip from the driver package), it says it is not for this printer. I have even tried the generic 32 bit PS and it says the same thing. Any ideas on what I am doing incorrectly or where to get the drivers that I need?
Thanks,
Gary

Hello, I have the same problem. For the 2605 Printer is only the universal print driver available. Is seems that HP is to be lazy about making new 2008 driver.

Windows 2008 Server and Windows 8 clients

Hey Guys,
I have had this problem for sometime now and really need a solution. I have Windows 2008 Enterprise Server running about 200+ terminal services clients. All Windows XP clients are fine, Windows 7 clients have issues when they get an updated version of
remote desktop client(to solve the issue we simply rollback the update), Windows 8 clients cannot connect and use out remote app. The issue stems from the newer version of remote desktop client (on windows 7 and embedded in windows 8) cannot connect to our
terminal server and generates an error and immediately disconnects. The error says "
Your computer can't connect to the remote computer because an error occurred on the remote computer that you want
to connect to
So my questions are, how can i update my Windows 2008 Terminal server version to support these clients, or do u have migrate to Windows 2012? Or is there a solution to my current problem which will allow my client to connect and use the remoteapps?

Hi,
Thank you for posting in Windows Server Forum.
Please follow the below steps and verify result.
LAN manager authentication level settings (Local security policy->Local Policies->Security Options->Network Security: LAN Manager Authentication level).
Try to change it to "Send NTLMv2 response only"
Snap:
If still face the issue please install this Hotfix.
RDS client computer cannot connect to the RDS server by using a remote desktop connection in Windows
http://support.microsoft.com/kb/2752618/
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Interesting problem with RAID, Windows 2008 server, and Ubuntu

sooooo, i got the system working and linux loved it. just adored it.
however, Windows did not. Windwos 2008 server hard locks from time to time. i fianlly figured out that it had to do with the RAID 0 i was running, that didn't really succeed.
However, when i rebuilt the RAID and everything on it, it refuses to recognize the disk, sayign that windwos cannot determine if this drive has a valid system volume on it.
Ubuntu 9.04 server, however, just took it and made it work great.
I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable. Then i went back and redid the raid, and it did the original error.
I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk. While it installed fine, it gave me an IRQL_not_less_than_or_equal error. It boots in safe mode, but no where else. I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate. I went back to ubuntu, this time the desktop/workstation versions, and i am doing an alternate install with RAID...much to my disappointment becuase now i will have to use VirtualBox to isntall windows...and if that fails, i'll be really pissed.
My settings are as follows:
SATA Controller 0-5 enabled
NVRAID- enabled
PCI BUS SATA- Option ROM Enabled, Master Enabled, and 0040h latency
MAC LAN- same as above
MAC LAN1- has master disabled, but the other stuff is the same
Serial port A is on AUTO, B is disabled, and floppy is disabled.
Option Rom is PFA relocation.
Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy. I just want to fix it
lastly, my LSI PCI-E scsi adapter is not being seen at ALL.
thanks guys.

Quote
Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy. I just want to fix it
lastly, my LSI PCI-E scsi adapter is not being seen at ALL.
Turn off onboard raid ctrl 1st. There are conflicting.
Quote
I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable.
Known issue, partition mess:
http://www.google.bg/search?hl=bg&ei=W-l3Sq_4NMbdsgbHnKmmBQ&sa=X&oi=spell&resnum=0&ct=result&cd=1&q=windows+cannot+determine+if+this+drive+has+a+valid+system+volume+on+it.&spell=1
Quote
I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk. While it installed fine, it gave me an IRQL_not_less_than_or_equal error. It boots in safe mode, but no where else. I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate.
What's the BSOD error? Are you using XP installation disk with included SP3?

Microsoft Windows 2000 Server and Solaris8 Interoperability?

My main server is a Windows NT based.
The Windows Services for UNIX2.0 is already installed in it.
I would like to know how am I able to access the Solaris machine from here.
I have problems trying to figure out which naming service for the Solaris machine (NIS, NIS+, DNS or Others). Which should I select?
Thanks in advance.
Tony.

Then I'd recommend 2003 SP 1
Note, if you do have to slice and then re-assemble the volumes on your 2K server, be sure to do concatenated sets, NOT striped sets, from within Disk Administrator. If you stripe slices on the same RAID set, you're going to cause TONS of extra head seeking, as it tries to read from stripes on different sections of the SAME disk. There will be no performance penalty with concatenated slices, because it will always be reading off all 7 spindles.

Windows 2008 Server License Key not working on VirtualBox

I have a validated licensed copy of Windows 2008 Server and I need to load it on a Virtual machine (I am running Oracle VirtualBox). When I had the server running on a hardware based server it worked fine. The license key activated and it worked. Now when
I load it onto the VirtualBox solution it fails. It will take it when I run the manual command but will not show my server as activated. This is for my private use only (internal home LAN) but I would prefer to have the activation be correct since I use this
setup to help keep fresh on Windows 2008 servers while being on a Linux OS with a VM software loaded. What can I do to have this server activate correctly under the VirtualBox?
Thanks,
Tom

Hi Tom,
Base on my experience, after we convert a physical computer system to virtualize environment we need to reactive it, with MAK active method we need keep this vm to connect to
internet and with KMS method please confirm this vm can communicate with your KMS server.
The related KB:
Understanding MAK Activation
https://technet.microsoft.com/en-us/library/ff793435.aspx
Volume Activation in Disconnected Environments
https://technet.microsoft.com/en-us/library/dd981010.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Will Windows 8.1 uninstall Windows 2008 server

I have a test box with windows 2008 server install. I now want to UNINSTALL windows 2008 server and INSTALL windows 8.1. Do Need to uninstall windows 2008 server first or will Windows 8.1 uninstall it for me?
thanks in advance.

Hi,
If Windows Server 2008 is considered no more useful, we may take a clean install of Windows 8.1 and choose to format the whole drive. And it is recommended to take a Windows Server 2008 backup first, just in case.
Some reference:
How to perform a clean installation of Windows
Blog:
Step-By-Step: Completing a Clean Windows 8.1 Install With a Windows 8 Key
If any further help needed, please feel free to post here.
Best regards
Michael Shao
TechNet Community Support

Windows 2008 Server contacting multiple public IP on port 80 and 443

Windows 2008 Server contacting multiple public IP on port 80 and 443
Source : Microsoft Lync 2010
Port : 80
Destination : unknown.prolexic.com
Source : Internet Explorer
Port : 80
Destination :a-0001.a-msedge.net
Source : Internet Explorer
Port : 443
Destination :204.79.197.200
Is this virus? how to stop the same?

Org name of the IP shows Microsoft Corporation
Since its hits on firewall , i will have to stop the same
but not sure for what its being contacted to these Ips
OrgName: Microsoft Corporation

Windows 2008 Server - Cannot run Active Directory Users and Computers

Hi,
I am running Windows 2008 Server with latest windows updates installed. Directory Services Role also.
I attempt to open Active Directory Users and Computers tool and I get a;
Microsoft Visual C++ Runtime Library error;
"The Application has requested the runtime to terminate it in a unusual way. Please contact the application's support team for more information"
I click ok, then get the following debug info;
Problem signature:
Problem Event Name: APPCRASH
Application Name: mmc.exe
Application Version: 6.0.6001.18000
Application Timestamp: 47919524
Fault Module Name: msvcrt.dll
Fault Module Version: 7.0.6001.18000
Fault Module Timestamp: 4791ad6b
Exception Code: 40000015
Exception Offset: 0000000000029b06
OS Version: 6.0.6001.2.1.0.272.7
Locale ID: 3081
Additional Information 1: 43aa
Additional Information 2: cf3a46656318492c1997480001b6b0e0
Additional Information 3: 3837
Additional Information 4: 92f72e0d0589ff77cef51e0a413aeff6
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
If someone could please assist, it would be very much appreciated.
Regards
B

Hi,
To solidly troubleshoot this kind of issue, we need to debug dump file. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
However, I am also glad to share my research.
Some third party applications may lead to this error. Please check if you install other third party applications on Windows server 2008?
Also, please follow the article below to perform necessary steps to see how it's going?
FIX: You receive an "invalid page fault in module MSVCRT.DLL" error message after you install the run-time libraries from Visual C++ 6.0
http://support.microsoft.com/kb/190536/en-us
Hope this helps.
Best wishes
Morgan Che

Windows 2008 Server boot loop and unable to log on in Safe mode

The Situation: I used msconfig to reboot Windows 2008 Server r2 into safe mode. On rebooting, boot progresses ok and the log in screen appears very quickly, then disappears and the machine reboots. I've tried typing the password very quickly and whether
I get it wrong or just can't get enough typed in time, I don't know, but the reboot loop continues. So, i can't log on and can't change safe boot back to normal.
I know Server 2008 uses bcdedit and no longer has a boot.ini, so I don't know if it is still possible manually to amend a boot file so it starts in normal mode again. Can anyone help me to break out of this boot loop without having to resort to anything
major, such as reinstallation?
Just to make clear, I haven't updated the system and the only change made was with msconfig to require safe boot on restarting.
Thanks

from the safemode try this syntax
Syntax: bcdedit /deletevalue {default} safeboot
http://technet.microsoft.com/en-us/library/cc721886(WS.10).aspx
http://www.virmansec.com/blogs/skhairuddin
How on earth is that a good answer? Sorry for the necrosis here of bringing up a post 9 months later, but I just ran in to this issue again. The OP said that he was STUCK IN A BOOT LOOP having placed himself in SAFEMODE already.
How is he supposed to type this in if he can't log in?
What worked for me was to keep striking F8 like a cobra during boot and telling it to use the Last Known Good Configuration option, after the 4th autoreboot, it let me log in and let me switch it back out of the safe mode and back to the normal boot. Yes,
I am aware this is quite lucky and now I don't have to rebuild all my server set up, and that your mileage may vary here, but, keep trying, you might be lucky.

Windows 2008 Server Enterprise R2 x64 and Perc 4/dc SCSI driver issue

Hello all, this is the first time posting so please forgive me if this has been posted here before. I did try to search this issue but zero returns.
OK, I have a Dell PowerEdge 2900. I have just put a fresh install of MS Windows 2008 ENT. Server x64. I cannot seem to find a driver for the PERC 4/dc SCSI controller I have installed. I have been told the 2003 x64 driver would work so I attempted to install that driver but was unsuccessful. Then I was told by Dell that the driver should be native to the OS. Is the driver native to 2008 Server (or, supposed to be)? Does anyone have an answer as to where I might retrieve am driver of the controller if not? Anyway, thanks in advance

Hello,
I don't have a PowerEdge 2900, but I do have a PowerEdge 2850. I'm also just a regular bloke like yourself that just happened upon your post and after I figured this driver debacle out I registered to hopefully help.
The good thing is my PERC card is the same in the PE2850 as it is in your PE2900, as I'm utilizing a PERC 4/DC. I've also managed to run into the same issue you ran into(?) trying to load Windows 2008 Server Enterprise R2 (support for 32bit processors have been removed in R2... so no more x86 versions... my poor PE2650s never stood a chance with this OS).
I can tell you officially from my experience/research Windows Server Enterprise R2 does not have support built into it for the PERC 4/DC card.
However, I was able to download the Windows 2003 x64 driver from support.dell.com and make it work after much trial and error with newer releases of the PERC 4/DC driver that were not accepted by 2k8R2.
Here's the link: http://support.dell.com/support/downloads/download.aspx?c=us&cs=RC956904&l=en&s=hied&releaseid=R100373&SystemID=PWE_PNT_P3C_2850&servicetag=FBCLP61&os=WX64&osl=en&deviceid=6396&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=3&libid=35&fileid=129549
File name (incase Dell moves it on you guys) is "perc-w2k3-6.46.3.64-A01.exe", date released 6/9/2005, build version 6.46.3.64, and the Dell revision number is A01.
Even though it states the driver is for the LSI Logic PERC 4e/Si it's sort of a mega pack including many other drivers such as the PERC 4/DC. This was much relief because I was thinking I would need to stick with Windows 2008 until I found this driver for Windows 2008 R2. :)
What I did was:
1) Downloaded the driver and extracted it to a USB drive.
2) Booted-up via the Win2k8R2 CD and when it got to the screen where it asked to install to a partition and didn't show me a partition to install Win2k8R2 to I selected the option to load a driver.
3) From the load driver option I just browsed to the directory where I extracted the files and selected that directory. If the "hide devices that are not compatible" option is selected (normally on by default) it will show you the proper driver.
4) Select the PERC 4/DC driver and then setup your partitions the way you would like them!
From there you should be able to boot into the OS... and really have some fun.
Now you have the power... I guess the choice is yours to R2 or not to R2... that is the real question. :)
Enjoy!
Dave
Thanks and this worked for a Power edge 1800, PERC 4/DC as well. Kukan

Install and uninstall of Oracle 11g R2 on Windows 2008 Server

Hi,
I installed Oracle 11g R2 and set up a database on Windows 2008 Server following the steps in the Installation Guide and it was successful. After uninstalling the product and doing a re-install, the step to configure the Net Configuration Assistant fails with the following msg.
Failed to allocate port(s) in the specified range(s) for the following process(es): JMS
[5540-5559], RMI [5520-5539], Database Control [5500-5519], EM Agent [3938] | [1830-1849]
Also, when I ran "netca.bat" and tried to reconfigure the Listener, it indicated the default port 1521 is being used. I ran "netstat -an" and do not see the port listed.
Questions:
What is the best way to check if something was leftover from my previous install of Oracle that is using the default ports?
What do I need to do to ensure a re-install is successful?
Uninstalling Oracle -
1.     Log in as the Administrator.
2.     Stop all Oracle Services.
3.     From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4.     Delete the C:\app\oracle directory.
5.     Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

Johan, after I uninstalled Oracle, I checked to ensure there were no remaining Oracle services remaining.
Srini, below are the steps I followed to uninstall Oracle. In step 3, I just ran deinstall.bat without any parameters and provided required information as prompted. Note, I uninstalled using the Administrator user and not the "oracle" account that I used to install Oracle.
Uninstalling Oracle -
1. Log in as the Administrator.
2. Stop all Oracle Services.
3. From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4. Delete the C:\app\oracle directory.
5. Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

Automate the database and forms / reports services to start on windows 2008 server R2 startup

Dear memebers,
I want to automate the database and forms / reports services to start on windows 2008 server R2 startup. whats the possibilities and which method is the best?
Regards:

Hi,
type services.msc at run
then check for Oracle Services--> Right Click-->Properties-->Startup type-->start automatic
HTH

HUM 1.2 and Windows 2008 - Server

Hello,
it is possible to run HUM with Windows 2008-Server? Problem is: It runns always CWLMS 3.2 and the customer wantes to add HUM. The hardware is not the problem.

There is both client and server support for Windows 2008 in Ciscoworks LMS starting with release
3.2 (Common Services V3.3). Please have a look at the following links:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.3/release/notes/cs33rel.html#wp79176
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/overview.html#wp1086601
Regards
Farrukh

T400s and Windows 2008 Server - Network card

I have installed Windows 2008 Server Enterprise edition on T400s. I cannot get network card to work, or wirless. I tried drivers for Win 7 and Vista. Are there any drivers for 2008 Server, or workaround?

Partially solved the problem for wirlesss connectivity:
1. Downloaded drivers from Intel site for Intel Wireless 5300 card
2. Enabled wireless setting on Win 2008 through features option

Microsoft Windows 2008 Server and RDC

Similar Messages

Maybe you are looking for