Microsoft windows defender is not working due to error code 0x80073b01 in windows 8.1

I had purchased this model on 19.10.2013, after that I had been using Norton Antivirus. But recently, I tried to start on Microsoft windows defender, which was already there in my laptop since I had purchased. The OS was windows 8, after that, I had upgraded it to windows 8.1 on recomendations by hp, however, I don't know which bit (either 32 or 64) windows 8.1 is it in my laptop. But the windows defender has never ever started, since begining it has been showing the same error code i.e. 0x80073b01. I have scanned my laptop through "Registry Recycler" also, at the suggestion given on internet, still the same problem is persisting. Please suggest the optimum solution to this problem, as my laptop contains so many firefox cookies and recycler virus.

+- did the same as you said to do i.e. sfc/scannow, but it showed the following message-"Windows Resource Protection could not start the repair service."Please tell what to do next, because the problem is still not fixed.

Similar Messages

Windows 8.1 installation failed due to error code 0x80240031

I tried to update my OS to windows 8.1 single language from windows 8 pc. But my installations was unsuccesful due to error code 0x80240031 . What is the problem and what is it's solution

Hi,
How did you upgrade Windows 8 to Windows 8.1? Through Windows Store? To resolve this problem. Firstly, please check and install all Windows update, and upgrade hardware driver to be latest. After that, please try to create a new user account and upgrade
system again.
If problem persists, please access to the path below to check Windows installation log:
setupact.log and setuperr.log in c:\windows.~BT\Sources\Panther. If this folder not exit, please check setupact log in C:\Windows\Panther. You may find the reason for this problem. You also can provide these log to us, we can help you analyze these log together.
Roger Lu
TechNet Community Support

Photoshop Camera Raw 7.4 Update is not installing due to error code U43M1D207. What needs to be done to resolve this error code?

The automatic update feature of Photoshop Camera Raw 7.4 is not installing properly due to error code U43M1D207. Please advise on how to resolve this issue.

If you need to post again, please keept the following in mind:
BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Blackberry id sign in not work but no error code

ok i wiped out my blackberry play book cuz it hadnt been working right and now i have to sign in with my id and its been trying to sing in for like 5min or so and its not giving me any error cod its just wont connet. its staying on the "loading" screen and it wont let me bypass the sign in to get in to my play book. so i cant ues it, HELP????

I have the same problem. Obviously a problem on Blackberry's end.....

Window.event does not working in Firefox 4.0 and also window.event.ctrlKey ?

hi,
I'm using Microsoft virtual earth map 6.2 (bing Map) in my application.On map showing number of images.On Each image there is onClick event that select image if user press left mouse button while holding Ctrl key .For this I wrote java-script function where I'm using Window.event.button (To check mouse button) and window.event. ctrlKey(To check control key) But these both are not working in Firefox 4.0 ,the same is working in Firefox 3.6X version perfectly.
Thanks

The same problem is in Firefox 5.0 version too

Acrobat Adobe Pro XI will not run due to error code 213:11 after downloading from creative cloud with no issues.

I have uninstalled and reinstalled 4 times, have added plugins to firefox and to no avail. I have contacted support twice, was disconnected once and the second time was told to uninstall and reinstall and my account was closed as fixed. I have reinstalled with the firewall off. same error code.
what is the problem??? I am pulling my hair out! I purchased in mid-Aug to use for school and have not been able to create one useable document yet.
I need the Acrobat pro, that is all I care about!!
some one please help!!!
Sharon

Hi 5unflower,
Please run the patch mentioned in the KB: http://helpx.adobe.com/acrobat/kb/error-213-19-licensing-acrobat.html
Regards,
Rave

Windows troubleshooter, windows update, and windows defender are not working :(

I'm running Windows 7, 64 bits and I suddenly encountered this problem, apparently none of these basic Windows things are working, I can't turn them on in anyway I've tried, and apparently I have no viruses in my computer. Has anyone encountered the same
problem? What could it be? Help please @_@

Hi,
It seems like system components corrupt, is there any error message when these tools doesn't work?
Please check Event Viewer if it identify this problem.
In addition, please try to use SFC /Scannow command to fix system file for test.
Roger Lu
TechNet Community Support

Adobe cs4 not working due to error 148:3

I have adobe cs4 and i can't launch the program or uninstall it, and every time I try to launch the program, it is showing me an Error named: Error 148:3, and also saying that liscensing for the product has stopped, please help!!!

Run the Creative Suite Cleaner Tool and reinstall properly. Also refer to this:
Error "Licensing has stopped working" | Windows
Error "Licensing has stopped working" | Mac OS
Mylenium

There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

Do a clean (re)install
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
From https://support.mozilla.com/en-US/questions/764376

The update does not work. An error code appears U44M1P2003

la mise a jour ne se fait pas. J'ai un code d'erreur U44M1P2003
Message was edited by: vincenth2012

See the following:
http://forums.adobe.com/message/4193333#4193333

Bootcamp 3.2: Microsoft Virtual WiFi MiniPort Adapter shows "device is not working properly...Code 31"

Using Windows 7 Enterprise 64-bit, Microsoft Virtual WiFi Miniport Adapter shows the "device is not working properly because Windows cannot load the drivers required for this device. (Code 31).".The device is the Apple iMac10,1 All-in-one computer. Right clicking browse files (for the device) shows the Bootcamp (C:), DVD (D:); and my external hard drives can be selected.
Internet and WiFi connections all working ok. Am also running MacDrive 8 to access the Mac drives when in the Windows partition, again without any seeming issues.
Updating the driver simply generates another Code 31 error.
Appreciate this seems to be a known problem - is the a solution a novice use might be able to follow or should I simply ignore the error message?
Driver Date us 21/06/2006 and Driver Version is 6.1.7600.16385.

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 4-1204tx Ultrabook and issues with WiFi adapter is not working properly. Error codes in Device Manager in Windows 8.1 could be fixed by deleting any extra drivers. So I would uninstall all that is listed in the Network drivers in the Device Manager, restart the Notebook. Here is a list of Device Manager options, this might help.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating or reinstalling. Hope this helps. Thanks.

Windows 7 Updates not working since Infinity insta...

Hi All,
I've had Infinity for a week and Windows updates have not worked since. My permissions are the same and i have Admistrator access.
The error code is 80070005
I have done a system restore which has removed Explorer 9 and am still having the same problem
Can anyone help me?
Thanks
Amanda

Same as the others my Win7 updates ok.
Hi,
The error code 80070005 usually means that you do not have enough permission to install updates.
First please confirm you have logged on an account with administrative privileges.
I suggest you to reset Windows update components and run Fix it.
Visit this link for information on how to reset windows update components:
http://support.microsoft.com/kb/971058
iechyd da
sky twitter account a customer ask why sky go streams are worst then sd and yet bt and eurosports apps stream in hd. Reply from mod, oh thats easy the files for hd are some huge that sky go can't play them and no app can stream hd due to this and so when they say they are they're really sd streams, if there was any way around this we would have done it now.

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

Control key not working on MB Pro while connected to windows 2008 server through 2x client. Any ideas? Works on windows through parallels.

Control key not working on MB Pro while connected to windows 2008 server through 2x client. Any ideas? Works on windows XP through parallels desktop.

Hello...
It seems I got it fixed!! I had been trying the Fixit tool from
http://support.microsoft.com/kb/306759 while typing up there :))))
This tool is for changing RDP port but running it fixed my problem (I kept the port 3389 intact)!!
Hope it helps someone.

Windows Defender will not start after injecting Language Pack

Hi
I have started creating a new Windows 8.1 image for deployment to a new series of computers. When I am in audit mode installing programs, Windows Defender works fine. After sysprep and offline injection of Language Pack (da-dk) Windows Defender user
interface is not able to start.
Error message:
An error has occurred in the program during initialization. If this problem continues, please contact your system administrator. Error code: 0x80073b01.
Both Windows defender services is running and I can even run commands with MpCmdRun.exe from a command prompt. The issue seems to be with the language of the UI.
Is there something I need to do with Windows Defender when I install language packs?
Thomas | MCP | http://www.techwork.dk

Hi,
There might be some related files missing or corrupted.
Please take a try with the SFC command:
Use the System File Checker tool to repair missing or corrupted system files
Or try the dism command to restore health:
Dism /online /cleanup-image /restorehealth
Fixing component store corruption in Windows 8 and Windows Server 2012
Best regards
Michael Shao
TechNet Community Support

Microsoft windows defender is not working due to error code 0x80073b01 in windows 8.1

Similar Messages

Maybe you are looking for