Microsoft Windows Error When Trying To Sync

When trying to sync my 4th gen nano with iTunes I always get a error window that appears saying:
"Do you want to scan and fix STEVE's NANO (F:)?"
There might be a problem with some files on this device or dics. This can happen if you remove the device or disc before all files haven been written to it.
* Scan and fix (recommended)
* Continue without scanning
If I select Scan and fix I get a message saying it could not access the file.
If I continue without scanning sometimes it will sync, other times it won't.
Have no problems with syncing my iPhone. Just the nano.

When trying to sync my 4th gen nano with iTunes I always get a error window that appears saying:
"Do you want to scan and fix STEVE's NANO (F:)?"
There might be a problem with some files on this device or dics. This can happen if you remove the device or disc before all files haven been written to it.
* Scan and fix (recommended)
* Continue without scanning
If I select Scan and fix I get a message saying it could not access the file.
If I continue without scanning sometimes it will sync, other times it won't.
Have no problems with syncing my iPhone. Just the nano.

Similar Messages

  • HT1222 my ipod reads error when trying to sync with itunes

    my ipod reads error when trying to sync to my itunes

    Hello, TheHelper1964.
    Thank you for the question.  There could be multiple causes to the errors that you are receiving.  I have included a couple articles that will help you troubleshoot this issue. 
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/TS2529
    If you are uncomfortable processing some of these steps, you can also reach out to us at http://expresslane.apple.com. 
    Hope this helps,
    Jason H. 

  • I get an error when trying to sync my music. It says I do not have enough access privileges for the operation.

    I get an error when trying to sync my music. It says I do not have enough access privileges for the operation.

    Follow this instruction exactly to the last line.  It worked on mine.
    Jolly Giant wrote:
    daduser wrote:
    "copying files failed, because you don't have permission to change your ITUNES media folder or a folder within it."
     check if you have read & write permissions for your iTunes music (or media) folder. in finder, right-click on it and +get info+. unlock the little padlock (you may have to enter your admin password) and change the permission settings. if permissions settings check out, click on the little gear-shaped icon and +apply to enclosed items+ like so 
     now try consolidating again.

  • Get the following error when trying to sync itunes to Nano itunes could not coppy " Song"  to the ipod because unknown error occurred (-5000).  Any ideas?

    Get the following error when trying to sync itunes to Nano itunes could not coppy " Song"  to the ipod because unknown error occurred (-5000).  Any ideas?

    Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
    tt2

  • I received an error when trying to sync my IPOD erorr 13019

    I received an error when trying to sync my IPOD erorr # 13019

    See my response to your other post.

  • I am getting a -50 error when trying to sync my IPOD Classic  with XP.

    I am getting a -50 error message when trying to sync my IPOD Classic with ITunes. My computer is running WIndows XP.

    Given that you're on XP, we'd better try the following document:
    iTunes displays -50 error message when syncing iPod on Windows XP

  • Error when trying to sync iPod touch 32 GB 4G to iTunes with Windows 7

    I'm getting two errors when I try to sync my son's 32 GB iPod touch (4th generation) to iTunes. The device doesn't show up and the touch starts chirping consistently. Here are the two errors:
    iTunes could not connect to this iPhone because an unknown error occurred (0xE8000001).
    and
    iTunes could not connect to the iPhone becuase an invalid response was received from the device.
    I've updated to the latest version of iTunes. Anyone have any other ideas?

    Try here:
    http://support.apple.com/kb/TS3221
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting)(

  • Strange error when trying to sync video and cannot get past HELP!

    My Ipod (and I have another one as well, a photo that works just fine with everything) will simply not sync all the way. It works until it encounters an error, and then quits. This ipod, a 60 gig video does this as well as another ipod I have, a 30 gig video. Yes I have 3 ipods, its crazy.
    It happends EVERY time it gets to 30 days, Immigaration. I have tried not syncing it but it still happens again later, some of the videos will download though.
    The error message is:
    These are regular videos that I bought through ITUNES.
    PLEASE HELP!!!
    dell 9300   Windows XP  

    I can't recall ever seeing an error -93. These are two of the most common.
    Error -36, disk cannot be read from or written to error syncing iPod in iTunes.
    iTunes displays error 69 when syncing iPod.
    "It happends EVERY time it gets to 30 days, Immigaration."
    Could you explain what you mean by this.

  • Error when trying to sync with publishing server

    Hi,
    I'm trying to run the Sync-AppVPublishingServer cmdlet on a Windows 7 client however I get the following error back:
    sync-appvpublishingserver : Application Virtualization Service failed to complete the requested operation.
    Operation attempted: RefreshPublishingServer.
    Windows Error: 0x80190194 -
    Error module: Publishing. Internal error detail: 45500D2780190194.
    Please consult AppV Client Event Log for more details.
    At line:1 char:1
    + sync-appvpublishingserver
    +
    + CatergoryInfo: InvalidResult; <:> [Sync-AppvPublishingServer], Client Exeception
    + FullyQualifiedErrorId: RefreshPublishingServerError,Microsoft.AppV.AppvClientPowerShell.SyncAppvPublishingServer
    In the error logs on the client, I get 2 that I can see:
    HttpRequest sendRequest failed.
    URL: http://appsvr:8080/
    Error code: 0x45500D27 - 0x80190194
    Getting server publishing data failed.
    URL: http://appsvr:8080/
    Error code: 0x45500D27 - 0x80190194
    Does anyone have any ideas how to fix this?
    For testing, I've turned off the firewall on both the client and server side and also all full access for 'Everyone' to the App-V share.
    Thanks

    what's the result if you enter the URL into a browser? 194[hex] = 404[dec]: HTTP File not found
    Falko
    Twitter
    @kirk_tn   |   Blog
    kirxblog   |   Web
    kirx.org   |   Fireside
    appvbook.com

  • Windows crashes when trying to sync photos

    I'm a new Nano user and I finally got iTunes through my firewall, playing music, and synching with my Nano. I can load my songs and make playlists. So far, so good.
    Today I've been trying to sync up to load pictures, but every time I do, Windows crashes. I've tried searching the support articles and couldn't find this issue before. I've been trying to sync it to a particular file with a select group of pictures: I've tried using different file and subfile locations and I've tried changing the size or number of the photos....but it still happens. Every time my Nano syncs with iTunes to include a photo sync, all of Windows crashes.
    Is there something about the photo files (jpeg) that I should know or change? They're all about 300K and all have text names (not digits or symbols).
    Any help appreciated.

    hi Pegasus!
    gosh, but this is a weird complex of symptoms that you're getting. i've actually seen then all before individually, just not in a clump together like this.
    this will be a long post. i'm going to start with troubleshooting directly related with with the blue screen, and then after that i'll dwell on the itunes-launch-failures/photosyncing-relation angles.
    0x0000001 (0x0000008, 0x0000008, 0x0000000, 0xBFF55036)
    Driver IRQLNOT_LESS_OREQUAL
    that can be a fiddly one to troubleshoot. i haven't seen any common denominators in itunes/ipod contexts with it.
    (1) let's try to get the malware possibilities off the table. (i'm usually more worried about that with a 0x0000050, but you're getting a weird bunch of symptoms.) download fresh definitions and run vigorous virus and spyware scans. if your security software providers offer them, run some online scans as well. (they can sometimes pick up an infection even if the security software on the PC has been compromised.)
    (2) have a check through your Device Manager (right-click "My Computer", select "Manage", click "Device Manager") to check to see if there are any warning/alert messages showing up next to any of your Devices.
    (3) have a look through the MS Knowledge base to see if you can find any reported causes of the IRQL_... that look like they might be relevant to your box. sorry, there's a whole bunch of different things to sift through over there:
    search on Driver IRQLNOT_LESS_OREQUAL
    (4) let's also capture a minidump of the crash and send it to the Discussions Hosts, so they can throw it over the fence to the Apple engineers for a look.
    To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
    And then send it to a Discussions Host. It doesn't hurt to put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
    itunes-not-launching/photosyncing
    security software on the PC can be implicated with both of these ... i just haven't seen it associated with both sorts of symptoms at the same time.
    Norton Internet Security 2005 is a common cause of error-message-free itunes launch failures, and i have seen it implicated in some odd syncing problems (just not with a BSOD on photosync.)
    McAfee is sometimes implicated with odd problems with photosyncing (but not typically with the itunes error-message-free launch failures).
    so let's try an experiment. if you switch your security software off prior to an attempt at a photosync, do you still get the blue screen?
    love, b

  • Error when trying to sync new update

    How annoying once again I didn't even know there was an update. Itunes downloaded the update but when it tries to sync it I get this error cannot sync ^0 to the iphone unknown error (-19) and I restarted my phone and restarted itunes. Now at the syncing part it is taking FOREVER to sync my applications I have installed. ***???

    Okay, I had to remove the application Hold 'em. And now it is downloading the update into my phone. While syncing though it said there were 9 errors and said all my other apps were not installed. How dumb! Now they need another update for that problem! I don't think I have ever experienced such a pain in the but before! And my phone is one of the older ones and I paid how much for this? I've been even thinking of dumping this and trying the one with Verizon!!!

  • Error when trying to sync Palm T

    I get the following error. I haven't been able to sync for the first time. I was upgrading from Netscape Calendar. Any suggestions?
    HotSync operation started 10/16/05 23:34:42
    <0010-00-00-00000008>The sync client service could not find a mandatory preference
    OK Oracle Date Book Conduit with 1 message(s)

    I was having the same problem on my Treo 650. Don't know if this will work for you, but it did for me (at least, it's working right at this moment).
    I'd installed Calendar Sync for Palm 10.1.1 on my Windows box and experienced "small heap" errors when syncing. At this point, I could see the timezone settings. Couldn't find anything on the small heap error, so I went to palm.com and downloaded/installed the latest Desktop software 4.1.4e, then reinstalled Calendar Sync. This is when I noticed there was a blank menu in the setup screen for the timezones. After poking around in the registry, I found the following:
    1. "HKEY_CURRENT_USER\Software\Oracle\Calendar Sync for Palm" appears to contain all the correct calendar sync configurations settings.
    2. "HKEY_CURRENT_USER\Software\Calendar Sync for Palm" also existed that basically contained blank keys. I deleted this hierarchy, went back to my settings, and the proper timezone showed up, along with all the other timezone settings.
    I don't know if this was a fluke, or if it will continue to work, but the next time I synced, it worked.
    After this worked, I uninstalled Calendar Sync and manually removed registry entry #1 aobve. I then reinstalled the Calendar Sync and checked the registry-- only the one mentioned in #1 was there, and everything worked fine. I'm curious to know if this works for you.

  • Error when trying to sync ipad2 to computer

    When I try syncing my ipad2 it goes thru the motions but then I get a message "the ipad cannot be synced unknown error occurred. (1156)
    I've unplugged and replugged but still the same message.
    Any ideas on what this is?
    Thanks,

    See if you can establish what specifically is causing it.  Start by taking all the ticks out of the top sync boxes in each section next to the Summary and Info pages of your device - ie untick music, films, books, etc.  Then add one in at a time.  I suggest you start with music, if it fails, then take the tick out of the Voice Memos box.
    See how you get on.  Dont change any specific page option, just take the ticks out of the main top sync boxes to start with, and try syncing one type at a time.
    Before you start it may be a good idea to right click your device icon in itunes and click on reset warnings.  And under Edit\Preferences\Advanced tab, also click on reset dialogue warnings.  Also reset the Store Cache whilst you are there too - particularly if you have noticed store pages loading slower than normal.

  • I get an internal device error when trying to sync my iphone 4

    Every time I connect I either get a message from iTunes that it doesn't recognize the phone or it tries to sync it and can't ending with an internal device error message.

    I had the same problem. I got it working a few hours after setting up the account. Go to the firefox button and click sync now. This solved the "Failed Server Lookup" issue for me.

  • How do I prevent windows from shutting down ITUNES with a Data Protection Execution error when trying to sync with my Iphone 4S in a 32 bit windows environment?

    I first was not able to install ITunes 10.5.  Apple upgrade installer caused a data protection execution error and windows reverted the process back to the original software.  I then removed ITunes through the control panel ap.  I removed Bonjour and quicktime.  I could not use the windows uninstaller to remove the apple upgrade installer and had to find a fix it program on the microsoft web site to fully remove this program.  After doing this, I was able to load and install itunes 10.5.  However, now when I try to sync my new 4S phone, the sync only goes to the 2nd or 3rd step before eliciting a DPE error and causing itunes to shut down.  I tried making a new user profile.  Opened I tunes in the new profile and began to search for music on my computer.  The program again elicited a DPE error.  I looked to see if quicken was still on the computer and maybe causing a hangup, but it is no longer installed.  Ok, I am at wits end and have spent much too much time on this issue.  Please help.

    I was able to finally stop ITunes from crashing after many days of searching n restarting my computer many times.
    a) First I went to this site ->http://forums.techarena.in/guides-tutorials/1119812.htm that showed me how to disable DPE. Please make sure that u have good virus...etc.. protection first before doing this. I have Avast Internet Security. RESTART UR COMPUTER..
    b) I then uninstall ITunes by following this site ->http://support.apple.com/kb/ht1923      RESTART UR COMPUTER..
    c) I then downloaded a beta version of ITunes. I happen to download beta 7 before the final of 10.5 version came out. Installed it. After installing I click on it n it said somewhere along the line of "this ITune ver. expired" I checked in my Programs n Features n notice that QuickTime was installed w that beta version.   
    d) Go online n download the final version of ITunes ->http://www.apple.com/itunes/download/ ...... After u finish dling install that. After that's done connect your IPod, IPhone...etc... n click on ITunes, it should sync all the way.
    I was finally able to sync all thru the steps insteading of it crashing on me midway. Hopefully this will work for you. Good luck !
    IPhone4, Gateway Windows Vista 32bit

Maybe you are looking for

  • Error while mapping Views

    When running the OMWB, the process will hang while trying to map the views. I have let it run overnight and it will still not move. Upon further examination of the error files, I got this error: java.lang.NoSuchMethodError      at oracle.mtg.sqlserve

  • I can't load a cd- it says "the classic environment is no longer supported" .

    Hi, I got a cd with a book for my kid, and when we try to load it, it says it can't open because the "classic environment is no longer supported". I assume it means the cd is old. Any hints? He'd LOVE to use it. Thanks, Ali

  • Method to Generate Report...??

    Hello, i want to know is that any method that can generate bar chart with jsp, mysql, tomcat?? I tried to search from internet, and i found out SwissChart is one of the method to generate graph... but i tried to follow the step of installation n the

  • SAP System Landscape Directory (SLD) Privileges

    Hello everyone, I'm not really sure if this is the correct place to start this discussion, but any help and support is really appreciated. The question is as follows: is it possible to define object privileges in SLD such as Products, Software Compon

  • DURING MRP RUN MATERIAL IN QI STATUS HOW TO GET MATERIAL OUT OF QI

    HELLO EXPERTS: DURING EVERY 24 HOUR MRP RUN 1 OR 2 MATERIALS SHOWS AS BEING IN QI STATUS WHEN IN RESTRICTED STOCK..... MY UNDERSTANDING IS MATERIAL IN RESTRICTED STOCK IS NOT IN QI.....CAN YOU EXPLAIN WHY