Microsoft windows network
I am using Parallels in my office, and Windows XP Pro. I cannot see any of the PC's on my network ... only Mac's. Is there anyway to be able to deal with both platforms on an office net.
Many thanks
Hi there...wanna get together and play with our macbook pro's together?...i'd love to see how well your machine performs and how long your battery lasts...i bet my battery lasts longer ...anyways, reply back and maybe we can hook up sometime soon...
Similar Messages
-
Microsoft Windows Network: The local device name is already in use.
I posted in : http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/disconnected-network-drive-error-as-follows-an/9a877c38-5e86-4c34-84c2-427a965577c6?page=2
Error:
"An error occurred while reconnecting drive letter to \\network server\share folder.
Microsoft Windows Network: The local device name is already in use.
This connection has not been restored."
1) A workstation is running Windows 7
2) The user has a drive letter mapped to a UNC
3) The connection is interrupted at some point and then restored
4) Upon attempting to access the mapped network drive, the user gets the error about the letter being
already in use.
Extremely disappointed that some of the posts marked as answers were obviously not, shows how poor the moderators here are.
My latest results clearly point to a Windows 7 client problem:
I received the error.
Had run nslookup so had a prompt open.
ran dir z: worked. went to Windows Explorer, same error.
ran dir z:\sharename worked. went to Windows Explorer, same error.
copy con z: test.txt then type test.txt; could create and retrieve file. Went and clicked on mapped drive in Windows explorer and received same error.
Obviously(?) not a Server or Networking problem. Ran Malwarebytes from bootable CD (client doesn't believe in AV). Didn't happen with USB flash drive.
Any other ideas?
I already have tried:
support.microsoft.com/kb/317021
http://support.microsoft.com/kb/303339
ftp://ftp.microsoft.com/misc1/BUSSYS/WINNT/KB/Q194/8/29.TXT
http://support.microsoft.com/kb/273151 Exchange issue
http://support.microsoft.com/kb/2663418 hotfix for win7
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/78276f1d-f7f9-416b-b903-
b9a18ecba67b/
http://support.microsoft.com/kb/297684
Ran MicrosoftFixit50494.msi
net use z: \\SERVER\ShareFiles /persistent:yes
http://support.microsoft.com/kb/2663418
http://support.microsoft.com/kb/297684#LetMeFixItMyselfAlways
http://support.microsoft.com/gp/gp_fixit_windows/en-us
http://support.microsoft.com/mats/windows_battery_power_settings
http://support.microsoft.com/kb/979470/en-us ???
http://support.microsoft.com/kb/947235/en-us
http://msdn.microsoft.com/en-us/library/cc232765.aspx
http://support.microsoft.com/kb/942817
Q939820? server 2003 sp3 Fix226580 341940_ENU_i386_zip.exe
http://support.microsoft.com/kb/983620
http://support.microsoft.com/kb/297684
net config server /autodisconnect:-1
KB Article Number(s): 2663418 Hotfix
http://support.microsoft.com/kb/983620
http://answers.microsoft.com/en-us/feed/t/9a877c38-5e86-4c34-84c2-427a965577c6
http://answers.microsoft.com/en-us/feed/t/9a877c38-5e86-4c34-84c2-427a965577c6
net use z: \\SERVER\1_CADFiles /persistent:yes SBS2011 Server with current service packs
Win7 Pro users with current Windows Update status
http://support.microsoft.com/kb/2663418
http://support.microsoft.com/kb/297684#LetMeFixItMyselfAlways
http://support.microsoft.com/gp/gp_fixit_windows/en-us
http://support.microsoft.com/mats/windows_battery_power_settings
http://support.microsoft.com/kb/979470/en-us ???
http://support.microsoft.com/kb/947235/en-us
http://msdn.microsoft.com/en-us/library/cc232765.aspx
http://support.microsoft.com/kb/942817
netsh winsock reset catalog
netsh int ip reset reset.log
Q811259
Q299357
Q937624
secpol.msc >> Lanman authentication level "send LM and NTLM"
net config server /autodisconnect:-1
changed server video to "standard vga"
disabled power save for NIC
Cannot disable Intell Raid software
http://technet.microsoft.com/en-us/library/cc780360%28v=WS.10%29.aspx restart
http://technet.microsoft.com/en-us/library/bb726989.aspx browse list
Q138365
net config server /autodisconnect:-1
two additional registry keys are added:
anndelta: REG_DWORD: 0xbb8
announce: REG_DWORD: 0xf0
netsh winsock reset
netsh interface ipv4 reset
netsh interface ipv6 reset
ipconfig /flushdns
shutdown /r
sfc /scannow
http://support.microsoft.com/kb/929833
http://social.answers.microsoft.com/Forums/en-US/w7network/thread/306dd446-7630-4d5b-8aa0-
40fb839b293a dns issue
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/i-have-this-problem-on-three-
win7-x64-systems-two/d44ed544-65f5-43a7-9e17-d2d10085c765?page=2
Leftover Homegroup components or Firewall?
disable DNS Client = dnscache
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/service-control-manager-reports-
that-a-timeout/e2e76ae5-ed09-4685-af86-5f8c2cd120bf Norton Internet Security uninstall issues
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/windows-7-no-dns-or-no-network
-after-resume-wake/c1253ab0-4793-449e-8975-a900ce7dec4f
NSLOOKUP
KB Article Number(s): 983620 HotfixThis is usually because the drive letter assigned to the network share is taken by something else. Maybe, by a removable drive.
Moderators and other answerers do their best to help specific cases, but everyone has their own situation. Apply common sense to the replies you find in the forums.
When you typed dir z: - is Z: the drive letter you wanted for this share, or it was automatically assigned?
-- pa
Alternatively you could try using common sense when you post, as well as taking the time to read the entire issue post so that you can avoid showing both your ignorance and arrogance (arrogance without any competency to back it I might add).
Suggesting that it might be "another drive" that took over the mapping shows your lack of reading comprehension and is unhelpful. Please take the time to, once again, read first.
Lastly moderators here generally show little technical skill beyond entering search words into a knowledge-base of articles and then applying the results incorrectly further exacerbating the situation for the customer. -
Almost every day when I open my computer I get this message:
An error occurred while reconnecting P: to \ \ JSERVER\data Microsoft Windows Network: The network path was not found. This connection has not been restored.
We then have to go through the process of resetting everything from start to finish just so I can connect to the server. There is no reason that we can find that causes this other than maybe windows updating every night. Any suggestions as to how to
fix this?it sounds like you have a network drive you are trying to map even though you are not logged in maybe in a script or task instead of backing up to :P backup to the share, make sure you have security set properly to run the task when not logged on.
I assume you are running a backup of some sort as this is the backup forum.. -
HELP using Microsoft Windows Network on a BT home ...
Hi,
I use to have my own network where we all in the house could share drives, files and printers across the network using the Microsoft windows network using a Netgear router. This was so much easier to setup and use. Now that I have the black BT home hub 2.0 that whole facility has gone. I've gone into the BT home hub and turned off the firewall but still no luck. If I had previous mapped drives and printers, they still work but I can't add any new ones.
Can someone please tell me how to set up the hub to be able to share drives and printers across the network?
Thank you.you should not need to make any changes to the hub to enable you to share drives/files/printer across your home network. you may need to go into the sharing centre of each pc/laptop and set up sharing again
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
I've recently added the MacAir to my Microsoft /Windows network. The Mac sees my printers but all the printers are "paused" and I cannot print, even if directly attached. How do I fix this?
Yes, I've that and it didn't work. Today, I reinstalled printer software on one printer and the "paused" message changed to "offline". It's a three-in-one printer. I turned off and on again and it still says "offline"
" -
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Hewlett-Packard HP Pavilion dv6700 Notebook PC
iTunes 10.2.1.1
QuickTime 7.6.9
FairPlay 1.11.16
Apple Application Support 1.5
iPod Updater Library 10.0d2
VoiceOver Kit 1.4 (222093/222742)
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver 1.55.0.0
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0025AAF8089EC380
Current user is not an administrator.
The current local date and time is 2011-05-15 21:05:05.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: dc0c6f739bfede483c8983f10e41784f
iPodService 10.2.1.1 is currently running.
iTunesHelper 10.2.1.1 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {588EB1BD-8374-43B1-B687-C47C33764298}
Description: Intel(R) Wireless WiFi Link 4965AGN
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun May 15 20:23:07 2011
Lease Expires: Mon May 16 20:23:07 2011
DNS Servers: 192.168.1.1
Adapter Name: {1C11AE53-28A5-4AC7-BA9F-CD4109D7856C}
Description: Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.0)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 18:00:00 1969
Lease Expires: Wed Dec 31 18:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2011-04-30 21:01:11.Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
We'd better check on that, kris. If you enable iTunes in your Windows firewall, does that help with your connection? See the following document for instructions:
How to enable iTunes in the Windows XP Firewall
EDIT: Drat ... gave you the link to the wrong document. Try this one instead for your Vista:
How to enable iTunes in the Windows Vista and Windows 7 Firewall
Message was edited by: b noir -
Microsoft-Windows-Folder Redirection Error 502. CSC database locked by another user
Dear all,
We are finalizing our Windows 7 migration where we migrated 500+ clients. In our enterprise concept we implemented RUP (Roaming User Profiles) and Redirected Folders for all
users. The Redirected Folders have been by enabled by a single GPO which redirects all folders from
AppData to
Searches \\servername.domain.name\documents$\%username%.
Problem:
The RUP and Redirected folders solution works fine until a new user wants to logon. This new user has been migrated to RUP and Redirected on another system and
he just wants to work on another workplace or gets a temporary pc. What happens is that redirected folders do not work. The user gets a message that the folder is not reachable and desktop is empty.
Troubleshooting:
Soon I found out that something was being locked. If we used a user account which had working Redirect Folders than this
worked for that user. An event of 10 was logged in OfflineFiles area of EventViewer to reconnect the path which was configured in the GPO.
This is example screenshot. It says "Error on Open Folder. \\server.domain.name\documents$\%username%\Desktop refers to a location that is unavailable. It could be on a hard disk
on this computer, or a on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location."
These symptoms happen randomly and not on all workstations. The pain here is when it happens on a portable computer. For desktop we disabled the "Disable Offline Files' in "Manage
Offline Files" control panel and then reboot. After the reboot the folders are directed
and it works without these errors... On portable computer we can't use this work around as they need to work offline.
If I connect to the share without the FQDN like \\servername\documents$\%username%\Desktop than this works fine and user can access all folders. When I try the FQDN path which is
configured in the GPO to redirect user to like \\servername.domain.name\documents$\%username%\Desktop than it fails with this message. I personally think because the C:\Windows\CSC database is locked by the previous user who has been logged on this system.
An example of the event generated in the Applications Event viewer part (I removed some username and server path):
Log Name: Application
Source: Microsoft-Windows-Folder Redirection
Date: 1-2-2011 17:40:11
Event ID: 502
Task Category: None
Level: Error
Keywords:
User: domain\ivan
Computer: computer.domain.name
Description:
Failed to apply policy and redirect folder "Videos" to "\\servername.domain.name\documents$\ivan\Documents\My Videos".
Redirection options=0x1001.
The following error occurred: "Can not create folder "\\\servername.domain.name\documents$\ivan\Documents\My Videos"".
Error details: "Access is denied.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Folder Redirection" Guid="{7D7B0C39-93F6-4100-BD96-4DDA859652C5}" />
<EventID>502</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2011-02-01T16:40:11.486983400Z" />
<EventRecordID>2754</EventRecordID>
<Correlation ActivityID="{3211E6FB-2801-456D-BE6E-66AAE150A4DC}" />
<Execution ProcessID="968" ThreadID="5856" />
<Channel>Application</Channel>
<Computer>computer.domain.name</Computer>
<Security UserID="S-1-5-21-3705223304-2632712944-1292073641-26755" />
</System>
<EventData Name="EVENT_FDEPLOY_FailedToApplyPolicy">
<Data Name="FromFolder">Videos</Data>
<Data Name="ToFolder">\\servername.domain.name\documents$\ivan\Documents\My Videos</Data>
<Data Name="Options">0x1001</Data>
<Data Name="Error">Can not create folder "\\servername.domain.name\documents$\ivan\Documents\My Videos"</Data>
<Data Name="ErrorDetails">Access is denied.
</Data>
</EventData>
</Event>
Something like this I see in the Application Eventviewer:
Environment:
Windows 7 Enterprise client with patches until 1-Nov-2010
Windows Server 2008 R2 for the Documents$ share
Windows Server 2003 R2 as the domain controller
I have tried all different option even to rebuild the CSC database but this also was not helping. I hope we are not dealing with a bug.
Any help is much appreciated.
Best regards, Ivan Versluis http://www.networknet.nlIvan and SteveDIG - Thanks for taking the time to post detailed information about what you have found. I have found the same things over the past few months and have been working with Microsoft to resolve this. Like Ivan, I have been told by
MS that this is a design problem in Windows 7, but they did admit it is a bug and did not charge me for the case. That was the good news. The bad news was that the problem is so 'deep' in Windows 7 that it will not be fixed until Windows 8 and
the CSC engineering team in Redmond has rejected several requests to fix this issue in Windows 7 from several customers. I personally feel we should have hauled our TAM in over this, but that wasn't my call so we haven't attempted to get an attitude
change from MS.
<RANT> I find this completely outrageous. Windows is supposed to be a multi-user operating system suitable for deployment to mobile workforces spread around the world and often using slow VPN links. Offline folders, folder redirection,
slow link detection, etc. are all great on paper and as I did the design work for the W7 solution I've just built I sold these advantages heavily. I now have serious egg on my face and am not happy. Like others here I missed this in testing as
multiple users are a fringe for us, but still important, I unfortunately didn't think to specifically test for multiple users, though I tested the features thoroughly and was happy with the results when used on single user machines.</RANT>
As identified above, this issue manifests when more than one user uses a machine and their Offline folders (all redirected folders are configured this way by default) are in an offline state when the first user logs off. The second user cannot access
this 'offline' share so folder redirection fails. We get burnt as we have latency=0 configured for slow link detection with Offline folders so users always work offline. This is partly because of WAN optimisers in the network that lie to Windows
so the online/offline transition doesn't work on slow links (not MS's fault), and partly because it made sense for other reasons.
The workaround Microsoft and I came up with for our environment was to use individual file shares for each user. We had been using a common file share with each user folder under that file share. Changing to an individual share for each users
means the share is not locked by the previous user.
Examples
This would cause a problem if John then Emma logged on to the same machine. Folder redirection would fail for Emma:
\\FileServer1\Users$\john
\\FileServer1\Users$\emma
So would this if DFS was used
\\my.domain\users\john (points to \\FileServer1\Users$\John)
\\my.domain\users\emma (points to \\FileServer1\Users$\Emma)
This would fix the problem:
\\FileServer1\John$
\\FileServer1\Emma$
Unfortunately we then figured we could move these shares behind DFS like so:
\\my.domain\homes\john (points to \\FileServer1\John$)
\\my.domain\homes\emma (points to \\FileServer1\emma$)
This was wrong. The problem returned. I assume the share that is being locked is now the DFS root and not the user share.
The operations team here is very reluctant to go with direct access to the file servers and not use DFS as that will create issues for them in the future when they need to make file server changes. I sympathise with them but can't see an alternative
at the moment as we are deploying W7 and can't stop. If I'd picked this up earlier a third party product might have been the solution (MS actually suggested this when I opened my case).
I hope the information about individual shares above is helpful to someone. Otherwise I don't really have more to add but I needed the rant :-)
<RANT>BTW. Has anyone tested changing a user’s home directory path once it is cached? Try it. Test a scenario where you move the user from one file server to another. You will not enjoy the results. I'll say no more
than this as it is off topic, but it shows the lack of investment in the CSC feature in Windows. Very disappointing</RANT> -
I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
Microsoft Windows Vista Ultimate Edition (Build 6000)
Dell Inc. Studio 1535
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0020AEDC02A7C4B8
Current user is an administrator.
The current local date and time is 2012-04-17 17:05:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {92497F93-8A79-419C-AA27-50CD2F263F77}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
Description: Dell Wireless 1397 WLAN Mini-Card
IP Address: 192.168.0.118
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Tue Apr 17 16:59:28 2012
Lease Expires: Wed Apr 18 16:59:28 2012
DNS Servers: 192.168.20.254
192.168.30.217
Adapter Name: {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
Description: Broadcom NetLink (TM) Gigabit Ethernet
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-17 17:04:26.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: Optiarc DVD+-RW AD-7640S, Rev HD14
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.This should get your itunes store connection working.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Packard Bell EASYNOTE_NJ65
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 002CB4E8010404B0
Current user is not an administrator.
The current local date and time is 2011-07-01 16:46:41.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce G 105M
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {98B9E48A-184C-4637-8D58-A8899938E119}
Description: Intel(R) WiFi Link 5100 AGN
IP Address: 192.168.0.102
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Fri Jul 01 16:29:09 2011
Lease Expires: Mon Jun 28 16:29:09 2021
DNS Servers: 192.168.0.1
Adapter Name: {D5E098AE-F183-4F39-8FA6-1B6CC9B289AC}
Description: Broadcom NetLink (TM) Gigabit Ethernet
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 04:00:00 1970
Lease Expires: Thu Jan 01 04:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-06-10 23:07:49.
**** Device Connectivity Tests ****
iPodService 10.3.1.55 is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.Tried to edit my post but I didn't see a way to edit.
Additional information: Diagnostics did not list any DNS servers, but the computer is connected to the internet and does not experience any connectivity problems other than with iTunes. -
Using Sun 7110 in a Microsoft AD network
I have a SUN 7110, I would like to use it as a file server in my Microsoft AD network. I have an old file server running on Windows 2003 server. I would like to move all files over to the 7110. If I choose to use CIFS is there a way for the 7110 to talk to AD. How would I create the shares and use AD authentication for the file.
I'm new to the 7110 so this might be an easy questionThanks for sharing your idea here, it's really useful
Mesothelioma -
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Dell Inc. Inspiron N7010
iTunes 10.7.0.21
QuickTime not available
FairPlay 2.2.19
Apple Application Support 2.2.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.0.59
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0032B09C094C1B88
Current user is not an administrator.
The current local date and time is 2012-09-26 16:25:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) Graphics Media Accelerator HD
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {4C5C6911-9B8F-4CAF-BCB3-36495F443DC9}
Description: Microsoft Virtual WiFi Miniport Adapter #2
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 07:00:00 1970
Lease Expires: Thu Jan 01 07:00:00 1970
DNS Servers:
Adapter Name: {9A01C758-72D3-4F24-8B9C-402D925B9FC5}
Description: Intel(R) Centrino(R) Advanced-N 6250 AGN
IP Address: 192.168.1.5
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Wed Sep 26 15:09:47 2012
Lease Expires: Sat Sep 29 15:09:47 2012
DNS Servers: 192.168.1.1
Adapter Name: {B98F7EEA-03A3-4616-B167-E9E4C6A09439}
Description: Intel(R) Centrino(R) WiMAX 6250
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 07:00:00 1970
Lease Expires: Thu Jan 01 07:00:00 1970
DNS Servers:
Adapter Name: {70E7745B-22AB-41A8-A36B-393DCE93A39A}
Description: Atheros AR8152 PCI-E Fast Ethernet Controller
IP Address: 192.168.1.4
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Wed Sep 26 15:09:33 2012
Lease Expires: Sat Sep 29 15:09:33 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-09-26 16:17:01.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
E: HL-DT-ST DVDRWBD CT30N, Rev A100
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.7.0.21 (x64) is currently running.
iTunesHelper 10.7.0.21 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.i cant access to itunes store
Can you walk us through what happens when you try to connect to the Store, please? -
== Issue
==
I have another kind of problem with Firefox
== Description
==
In migrating from an XP PC to a new Win 7 PC, I downloaded Firefox to the new PC and it worked fine - got my Gmail contacts, calendar, etc. Later I used Micros Soft's Windows Easy Transfer to move data, profiles, etc to the new PC. Then could log onto Gmail but it would not show Contacts or Calendar. I then uninstalled Firefox and reinstalled it - nohelp, then I did a system to Restore to before I did the Windows Easy Transfer - no help, then I manually moved my Firefox Profile from the XP machine - no help. BTW at least one other website does not display correctly: http://www.hollandamerica.com/main/Main.action. NOTE - through all this Internet Explorer has shown these sites correctly.
== This happened
==
Every time Firefox opened
== Used Microsoft Windows Easy Transfer
==
== Troubleshooting information
==
Troubleshooting Information
This page contains technical information that might be useful when you're
trying to solve a problem. If you are looking for answers to common questions
about Firefox, check out our support web site.
Copy all to clipboard
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Flashblock 1.5.13 true {3d7eb24f-2740-49df-8937-200b1cc08f8a}
Google Notebook 1.0.0.22 false [email protected]
Microsoft .NET Framework Assistant 1.2.1 true {20a82645-c095-46ed-80e3-08825760534b}
PDF Download 3.0.0.1 false {37E4D8EA-8BDA-4831-8EA1-89053939A250}
Java Console 6.0.20 true
McAfee SiteAdvisor 3.0 true
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar 0
browser.history_expire_days 20
browser.history_expire_days.mirror 20
browser.places.importBookmarksHTML false
browser.places.importDefaults false
browser.places.leftPaneFolderId -1
browser.places.migratePostDataAnnotations false
browser.places.smartBookmarksVersion 2
browser.places.updateRecentTagsUri false
browser.startup.homepage https://mail.google.com/mail/?shva=1#contacts
browser.startup.homepage_override.mstone rv:1.9.2.3
browser.tabs.loadInBackground false
dom.disable_window_move_resize true
dom.event.contextmenu.enabled false
extensions.lastAppVersion 3.6.3
general.useragent.extra.microsoftdotnet ( .NET CLR 3.5.30729)
network.cookie.lifetimePolicy 1
network.cookie.prefsMigrated true
network.image.imageBehavior 0
places.last_vacuum 1273287748
print.print_printer HP Photosmart C7100 series
print.printer_HP_OfficeJet_Pro_1170Cse.print_bgcolor false
print.printer_HP_OfficeJet_Pro_1170Cse.print_bgimages false
print.printer_HP_OfficeJet_Pro_1170Cse.print_command
print.printer_HP_OfficeJet_Pro_1170Cse.print_downloadfonts false
print.printer_HP_OfficeJet_Pro_1170Cse.print_evenpages true
print.printer_HP_OfficeJet_Pro_1170Cse.print_footercenter
print.printer_HP_OfficeJet_Pro_1170Cse.print_footerleft &PT
print.printer_HP_OfficeJet_Pro_1170Cse.print_footerright &D
print.printer_HP_OfficeJet_Pro_1170Cse.print_headercenter
print.printer_HP_OfficeJet_Pro_1170Cse.print_headerleft &T
print.printer_HP_OfficeJet_Pro_1170Cse.print_headerright &U
print.printer_HP_OfficeJet_Pro_1170Cse.print_in_color true
print.printer_HP_OfficeJet_Pro_1170Cse.print_margin_bottom 0.3
print.printer_HP_OfficeJet_Pro_1170Cse.print_margin_left 0.5
print.printer_HP_OfficeJet_Pro_1170Cse.print_margin_right 0.3
print.printer_HP_OfficeJet_Pro_1170Cse.print_margin_top 0.3
print.printer_HP_OfficeJet_Pro_1170Cse.print_oddpages true
print.printer_HP_OfficeJet_Pro_1170Cse.print_orientation 0
print.printer_HP_OfficeJet_Pro_1170Cse.print_pagedelay 500
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_data 1
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_height 11.00
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_size 1634485807
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_size_type 0
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_size_unit 0
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_width 8.50
print.printer_HP_OfficeJet_Pro_1170Cse.print_printer HP OfficeJet Pro 1170Cse
print.printer_HP_OfficeJet_Pro_1170Cse.print_reversed false
print.printer_HP_OfficeJet_Pro_1170Cse.print_scaling 1.00
print.printer_HP_OfficeJet_Pro_1170Cse.print_shrink_to_fit true
print.printer_HP_OfficeJet_Pro_1170Cse.print_to_file false
print.printer_HP_Photosmart_C7100_series.print_bgcolor false
print.printer_HP_Photosmart_C7100_series.print_bgimages false
print.printer_HP_Photosmart_C7100_series.print_command
print.printer_HP_Photosmart_C7100_series.print_downloadfonts false
print.printer_HP_Photosmart_C7100_series.print_edge_bottom 0
print.printer_HP_Photosmart_C7100_series.print_edge_left 0
print.printer_HP_Photosmart_C7100_series.print_edge_right 0
print.printer_HP_Photosmart_C7100_series.print_edge_top 0
print.printer_HP_Photosmart_C7100_series.print_evenpages true
print.printer_HP_Photosmart_C7100_series.print_footercenter
print.printer_HP_Photosmart_C7100_series.print_footerleft &PT
print.printer_HP_Photosmart_C7100_series.print_footerright &D
print.printer_HP_Photosmart_C7100_series.print_headercenter
print.printer_HP_Photosmart_C7100_series.print_headerleft &T
print.printer_HP_Photosmart_C7100_series.print_headerright &U
print.printer_HP_Photosmart_C7100_series.print_in_color true
print.printer_HP_Photosmart_C7100_series.print_margin_bottom 0.300000011920929
print.printer_HP_Photosmart_C7100_series.print_margin_left 0.5
print.printer_HP_Photosmart_C7100_series.print_margin_right 0.300000011920929
print.printer_HP_Photosmart_C7100_series.print_margin_top 0.300000011920929
print.printer_HP_Photosmart_C7100_series.print_oddpages true
print.printer_HP_Photosmart_C7100_series.print_orientation 0
print.printer_HP_Photosmart_C7100_series.print_pagedelay 500
print.printer_HP_Photosmart_C7100_series.print_paper_data 1
print.printer_HP_Photosmart_C7100_series.print_paper_height 11.00
print.printer_HP_Photosmart_C7100_series.print_paper_size 1634485807
print.printer_HP_Photosmart_C7100_series.print_paper_size_type 0
print.printer_HP_Photosmart_C7100_series.print_paper_size_unit 0
print.printer_HP_Photosmart_C7100_series.print_paper_width 8.50
print.printer_HP_Photosmart_C7100_series.print_reversed false
print.printer_HP_Photosmart_C7100_series.print_scaling 0.80
print.printer_HP_Photosmart_C7100_series.print_shrink_to_fit false
print.printer_HP_Photosmart_C7100_series.print_to_file false
print.printer_HP_Photosmart_C7100_series.print_unwriteable_margin_bottom 0
print.printer_HP_Photosmart_C7100_series.print_unwriteable_margin_left 0
print.printer_HP_Photosmart_C7100_series.print_unwriteable_margin_right 0
print.printer_HP_Photosmart_C7100_series.print_unwriteable_margin_top 0
print.printer_hp_psc_1200_series.print_bgcolor false
print.printer_hp_psc_1200_series.print_bgimages false
print.printer_hp_psc_1200_series.print_command
print.printer_hp_psc_1200_series.print_downloadfonts false
print.printer_hp_psc_1200_series.print_evenpages true
print.printer_hp_psc_1200_series.print_footercenter
print.printer_hp_psc_1200_series.print_footerleft &PT
print.printer_hp_psc_1200_series.print_footerright &D
print.printer_hp_psc_1200_series.print_headercenter
print.printer_hp_psc_1200_series.print_headerleft &T
print.printer_hp_psc_1200_series.print_headerright &U
print.printer_hp_psc_1200_series.print_in_color true
print.printer_hp_psc_1200_series.print_margin_bottom 0.3
print.printer_hp_psc_1200_series.print_margin_left 0.5
print.printer_hp_psc_1200_series.print_margin_right 0.3
print.printer_hp_psc_1200_series.print_margin_top 0.3
print.printer_hp_psc_1200_series.print_oddpages true
print.printer_hp_psc_1200_series.print_orientation 0
print.printer_hp_psc_1200_series.print_pagedelay 500
print.printer_hp_psc_1200_series.print_paper_data 1
print.printer_hp_psc_1200_series.print_paper_height 11.00
print.printer_hp_psc_1200_series.print_paper_size 1634485807
print.printer_hp_psc_1200_series.print_paper_size_type 0
print.printer_hp_psc_1200_series.print_paper_size_unit 0
print.printer_hp_psc_1200_series.print_paper_width 8.50
print.printer_hp_psc_1200_series.print_reversed false
print.printer_hp_psc_1200_series.print_scaling 1.00
print.printer_hp_psc_1200_series.print_shrink_to_fit true
print.printer_hp_psc_1200_series.print_to_file false
privacy.clearOnShutdown.cookies false
privacy.clearOnShutdown.downloads false
privacy.clearOnShutdown.formdata false
privacy.clearOnShutdown.history false
privacy.clearOnShutdown.passwords true
privacy.cpd.cookies false
privacy.cpd.downloads false
privacy.cpd.formdata false
privacy.cpd.history false
privacy.item.downloads false
privacy.item.formdata false
privacy.item.history false
privacy.item.passwords true
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.promptOnSanitize false
privacy.sanitize.sanitizeOnShutdown true
security.warn_viewing_mixed false
== Firefox version
==
3.6.3
== Operating system
==
Windows 7
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729)
== Plugins installed
==
*-Default Plug-in
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*Shockwave Flash 10.0 r45
*McAfee Virtual Technician plugin for Mozilla (Gecko Version: 1.8b1)
*3.0.50106.0
*NPWLPG
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Adobe PDF Plug-In For Firefox and NetscapeOops - for some reason, this problem now seems to have gone away. May have had something to do with Flash. I'll keep my fingers crossed.
-
Ia there a good alternative to Microsoft windows server for enterprise?
Hi Guys, I work at a small (22 FTE's) public(not-for-profit) art galley. We are currently a mixed pc/mac office with various departments, all with different needs. Communications/Design are Mac. 2/3rds of the Curatorial is Mac, 1/3rd PC. Public Programs is mostly Mac with one PC. The accounting, giftshop, and Databases are all PC. The giftshop and accounting use ACCPAC. The collections (artwork collection that is) department uses FileMaker Pro backend, with a frontend called "Virtual Collections". We very much dislike Virtual Collections BTW. Our other database, which handles membership, and financial donation tracking, is @EASE. Because we are not-for-profit our overall budget for IT is relatively small, and the system is the way it is because of years of neglect, and stop-gap purchases. We use a Microsoft Server with Exchange. We are in the process of building a new gallery, and with it the ability to start fresh on a number of levels. One of which is our Server. Personally I'd like to see us move away from the Microsoft server ecosystem. It is cumbersome, requiring lots of IT support (which we contract out by the way, and costs us a tidy little sum yearly on top of MS Server licensing etc.) Our Management team is considering going to an all PC environment with the (I feel mistaken) attitude that "if all computers are the same flavour, the whole system will run more smoothly and thus be less expensive to manage". As on of the Mac users within this system, who knows a little about, but is no expert in, computers and networks in general, I'd like to be able to open a dialogue with management at this crucial juncture on alternatives to the system we now use. I had run across a website some time ago that outlined the "real cost of owning and operating Microsoft Servers" but can not seem to locate it anymore. It basically broke down all costs of running a Microsoft environment, and concluded that, over time, it is not very cost efficient, especially for small enterprise. Has anybody run across any really good server alternatives to Microsoft Exchange, and Microsoft Windows Server (I think ours is 2008)? We are a relatively small city, and the IT/Networking companies here all seem to push Microsoft as a be-all-end-all. I'm not so sure. I'd like to present viable alternatives with sound arguments to back them up. Can you guys help? Or, an you point me toward someone who can? Thanks guys, keep up the good work, Tmamer
Have you ever got this resolved?
I noticed your VIP and Public IP are not on the same subnet, i thought they had to be?
like both 10.x.x.x and subnet 255.0.0.0 or something like that?
Could this be your problem?
I am trying to setup a two node cluster Oracle Rac 10g on IBM Blade Center H with HS21 XM blades.
My problem is trying to setup HA and not have a single point of failure and in order to do this, it almost seems as if i need 4 network interfaces in the HS21 blade so i can team 2 together.
Did you guys purchase any addition expansion cards for these servers for that reason?
My understanding is that each HS21 have by default 2 nics, and they each go to one of the two internal cisco switches (within the entire bladecenter).
So if for instance we have one of the cisco switch die, like the one that has the public interface plugged into it, then we could not longer access the rac and that would be a single point of failure. So unless we can have 4 interfaces on the blade, and have them 2 teamed with each nic going to one of the cisco internal switches. So if any one cisco switch die's it just uses the other one.
Any thoughts, suggestions? -
Hi everybody.
I have this problem on a Windows Server 2012 Datacenter, offering SCOM2012 and VMM2012 SP1 services.
If I try to access to \\servername\c$ , or vmm agent on a server try to access it, in the "Server Manager , File and Storage Services, Servers" console I can see the message, every minutes:
servername ID 30620 Warning
Microsoft-Windows-SMBClient Microsoft-Windows-SMBClient/Operational - Connection to server \servername IP Address x.x.x.x:445 was aborted.
I alreday apply the registry update:
LocalAccountTokenFilterPolicy QWORD = 1
UAC and firewall on the server are disabled.
Anyone have some suggestion for me ?
Thanks.
GabrielTwo HP DL Servers - a DL380 G5 and a DL 360 G5 - running Server 2012 Standard with Hyper-V. Both servers have HP NC373i onboard Gigabit NICs.
NIC 1 is for Management OS, NIC 2 is dedicated to Hyper-V. The latest/greatest HP Management software, drivers, firmware for Server 2012 are installed on both servers.
Could copy files to/from other servers with no problem, and near gigabit speed. All other networking appeared normal.
Could not copy files to each other. Could ping each other though.
Ran the above command and rebooted both servers - issue has gone away.
I've got a few more of these older HP servers that I'm going to test with Server 2012. -
Hi there... I am getting the above mentioned error with the
Description: dows-DistributedCOM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Full message is -
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 5/15/2012 1:18:44 PM
Event ID: 10016
Task Category: None
Level: Error
Keywords: Classic
User: NT AUTHORITY\IUSR
Computer: Server.domain.com
Description:
The description for Event ID 10016 from source Microsoft-Windows-DistributedCOM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
application-specific
Local
Activation
{2D527A8C-A4B6-4E74-A63F-E867360D401C}
{B13EFBAE-7504-4938-9ED7-8E8B53E51221}
NT AUTHORITY
IUSR
S-1-5-17
LocalHost (Using LRPC)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="49152">10016</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-05-15T19:18:44.000000000Z" />
<EventRecordID>43121</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>Server.Domain.com</Computer>
<Security UserID="S-1-5-17" />
</System>
<EventData>
<Data Name="param1">application-specific</Data>
<Data Name="param2">Local</Data>
<Data Name="param3">Activation</Data>
<Data Name="param4">{2D527A8C-A4B6-4E74-A63F-E867360D401C}</Data>
<Data Name="param5">{B13EFBAE-7504-4938-9ED7-8E8B53E51221}</Data>
<Data Name="param6">NT AUTHORITY</Data>
<Data Name="param7">IUSR</Data>
<Data Name="param8">S-1-5-17</Data>
<Data Name="param9">LocalHost (Using LRPC)</Data>
</EventData>
</Event>
Please let me know any solutions to fix....
Steps, I did try from one of the blogs -
Open Component Services. Got oStart --> Control Panel --> Administrative Tools --> Components Services. Expand the Component Services branch then expand Computers, My Computer and DCOM Config. Right-click on "sms agent host" (my case) and click
Properties. Click on the Security tab and under “Launch and Activation Permissions” select "edit" and add user Local Service (Local lunch). Click OK, close the Component Services window.
In the Launch Permission dialog box, make sure that the Everyone group has Remote Launch and Remote Activation permissions.
In the Launch Permission dialog box, make sure that the SMS Reporting Users local group has following permissions:
Local Launch / Remote Launch / Local Activation / Remote Activation
Also added Remote Launch / Remote Activation permission for Network Service (for the SMS_Reporting_Point)
Added Admin Group to the "ConfigMgr Remote Control Users"
VTIn addition, In the security policy the ‘Local Service’ need to be configured for the following Policies
- Generate security audits
- Create global objects
- Replace a process level token
- Adjust memory quotas for a process
- Impersonate a client after authentication
- Log on as a service
- Bypass traverse checking
Hope this helps.
Regards,
Yan Li
hi,
i m having similiar error but with another APPID
i did what u said in 1st part but i couldnt get what u mean in additional settings ? i couldnt do that.
Error details :
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 7/2/2013 4:03:20 PM
Event ID: 10016
Task Category: None
Level: Error
Keywords: Classic
User: LOCAL SERVICE
Computer: THINK
Description:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{7160A13D-73DA-4CEA-95B9-37356478588A}
and APPID
{7160A13D-73DA-4CEA-95B9-37356478588A}
to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10016</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2013-02-07T14:03:20.356793400Z" />
<EventRecordID>1465</EventRecordID>
<Correlation />
<Execution ProcessID="868" ThreadID="2832" />
<Channel>System</Channel>
<Computer>THINK</Computer>
<Security UserID="S-1-5-19" />
</System>
<EventData>
<Data Name="param1">machine-default</Data>
<Data Name="param2">Local</Data>
<Data Name="param3">Activation</Data>
<Data Name="param4">{7160A13D-73DA-4CEA-95B9-37356478588A}</Data>
<Data Name="param5">{7160A13D-73DA-4CEA-95B9-37356478588A}</Data>
<Data Name="param6">NT AUTHORITY</Data>
<Data Name="param7">LOCAL SERVICE</Data>
<Data Name="param8">S-1-5-19</Data>
<Data Name="param9">LocalHost (Using LRPC)</Data>
<Data Name="param10">Unavailable</Data>
<Data Name="param11">Unavailable</Data>
</EventData>
</Event>
Maybe you are looking for
-
How to use variables POST and personalize the fields form names
Hi friends, I need to send POST values to a external URL from APEX application to proccess a credit card and later receive the POST values to save the transaction, also the fields require have a personalized name, APEX create the field with standar n
-
Connecting Macbook to new iMac
I recently bought the 24 inch iMac because my Macbook (purchased April 2006) is slow, unresponsive and has a broken optical drive. I have all of my recent photographs on my Macbook and would like to transfer them to my new iMac using a brand new Fire
-
How to open attachment in mail
I am new to Mac. I have been receiving .wmv attachments with some e-mails and do not know how to open them. I double click the icon and just get a bunch of "code" or whatever it is. Is there a way to open these attachments?
-
Properties lost when widget is updated
I have created a simple widget using the Widget Factory. I've entered some Properties in Captivate and it works fine. However, after updating the widget in Flash and then clicking Update widget in Captivate, my Properties are gone (although the chang
-
Monitoring template and alert noifications, how ?
I have set up database monitoring template with some metric tresholds for warning/alerting. Also, I applied this to the databases. Now, my question is how will i be notified (say via e-mail) once an alert has generated ? I see notification methods an