Microsoft-Windows-StorageSpaces-Driver Initialization error

Hello,
I have a enclosure device connected to PCIe HBA and I am not able to see the chassis serial number and the RPM of the devices that are connected to this HBA. The device has a Enclosure Services Process. I see the following error in the windows log.
I am not able to find a description for this event Id. Any help/direction with regard to this error is appreciated.
"A storage enclosure failed to initialize. Return Code: The request is not supported."
The EventID is 403.
the source of the error is "Microsoft-Windows-StorageSpaces-Driver" per logs.
thanks
Sudhir

Hi Sudhir,
Do you add the storage in a storage space? If so, it could be there is bad firmware that would not allow Storage Spaces to initialize the Spaces properly.
You could refer to the thread belwo to troubleshoot the issue:
Windows 2012 R2 - SOFS - Intel JBOD = Unhealthy
https://social.technet.microsoft.com/Forums/en-US/db7ae382-baab-43bf-bfa4-6f50b005b9f4/windows-2012-r2-sofs-intel-jbod-unhealthy?forum=winserverfiles
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Macbook pro external DVD drive initialization error 70012

This is an answer to my own question and a comment about finding answers to questions on Apple forums.
The situation
I have a Macbook Pro, late-2009 model. In 2013, the internal DVD or optical drive died. I purchased an Apple external DVD drive to be able to read DVD disks, listen to audio, and watch video content. Because the computer I own was built to read only the internal DVD drive, it did not recognize this new external drive. When I plugged it in, I received an error: A valid DVD drive could not be found [-70012]. Or , or DVD could not be found, initialization error[- 70012].
The question
Given this situation, my question was, how do I solve DVD initialization error 70012?
The answer
Since my Apple Care plan had long since expired, before spending time and money at the Apple store to solve this, I decided to look online. After searching general sites and more and more specific sites, I found several posts on forums about my problem. The most helpful of these, with respect to an external DVD drive, was posted on CNET, by Topher Kessler (June 10, 2011 2:24 PM PDT):
http://www.cnet.com/news/addressing-dvd-player-error-70012-when-using-external-d rives-in-os-x/
The key to his advice was twofold:
1. Hardware: The Macbook Pro was programmed to recognize the internal DVD/optical drive alone.
2. Software: The preferences in the Macbook Pro were set to open Apple's DVD Player when a disc is inserted into the drive.
To play audio or video discs on an external drive, the computer needed to be instructed to recognize the external drive, plus appropriate software needed to be opened. Mr. Kessler's advice went from hardware (i.e., get a new internal drive), to software (i.e., use different audio or video software), to operating system (i.e., alter the code in the operating system). Like with Goldie Locks, the first was too expensive, the last was too invasive, but the middle option was just right.
I searched for free software to display audio and video on my external drive and found two that could do the job quite nicely. There are others, but these seemed to be the most recognized and highly rated:
1. MPlayerX (http://mplayerx.org/download.html)
2. VLC Media Player (http://download.cnet.com/mac/media-players/?rpp=30)
So, I didn't have to buy an internal DVD drive and I didn't have to alter the code of the operating system. I just needed to download free software, install, and play.
The points to learn
1. Computers involve both hardware and software, therefore solutions to computer problems can require fixes to one, the other, or both.
2. The simplest solution, and the least expensive, is to be preferred over the more complex.
3. What went wrong for someone else is not necessarily what happened to your computer or software.
4. What solved someone else's problem may not solve your problem.
5. Just because nobody has posted information on how to solve your problem doesn't mean there isn't a solution to it.

Hi Duane,
Thanks for the info! That's some catch-22 for DVD Player... but useful info. I guess I'll just pick up a generic DVD-ROM to replace the drive with.
As to the external drive, do not USB 2.0 cases run at the same speeds at Firewire 400 cases? (the same drive has no issues on other machines for playing dvds... just the lampshade iMac)

Exception: DBD, [Microsoft][ODBC Excel Driver] Syntax error in FROM clause.

Dear experts,
I'm trying to create an universe linked to an Excel File.
I've created the ODBc connection and the DNS Data Source and inserted the table (table name RAC$) in the Universe. however, when I try to map each table field in the universe's Objects I'm getting this error message:
"Exception: DBD, [ODBC Excel Driver] Syntax error in FROM clause.State:37000".
I've tried to rename the table, inserting square brackects and also add new parameters to the universe («Transactional Available = "Yes"» and «Delimited Identifier = "Yes"») but still no solution to my problem.
Any advice, tip or trick?
Thank you. My best regards.
Inês Santos

Hi Ines,
Thanks for sharing how you resolved this! I will bookmark this so that I can find it when I will likely need it!
Bill
Sorry I don't know how to make the accent circumflex! Or is that what you call it? On top of the e?
Edited by: wavery on Jun 11, 2010 12:07 AM
Edited by: wavery on Jun 11, 2010 12:09 AM

Windows 7 driver framework error violation

hello keep getting now and then a blue screen with error driver framework violation i updated my graphics to the latest version but still same o same o error message pops up now and then i am running hp p7-1180t 64 bit my graphics card is a nvidia geforce 550 serrios little help on fixing this proble would be thankful
ok just happen again i did write it down so i can added to my post.
fix from a miss spelled number 10D not 16D sorry just saw that now was trying to web search for more help on it then just happen again and though i fix the typo
stop: 0x0000010D (0x0000000000000005,0x0000000000000000,0x0000000000001202x0xFFFFFAF08CC0
after i restart my pc a pop up with this txt shows up
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7601.2.1.0.768.3
Locale ID:   1033
Additional information about the problem:
BCCode:   10d
BCP1:   0000000000000005
BCP2:   0000000000000000
BCP3:   0000000000001202
BCP4:   FFFFFA800D5FCAB0
OS Version:   6_1_7601
Service Pack:   1_0
Product:   768_1
Files that help describe the problem:
C:\Windows\Minidump\042914-24008-01.dmp
C:\Users\p****\AppData\Local\Temp\WER-94848-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hello Littlemand69,
I understand you are getting a BSOD error related to your graphics card. I am providing you with theOriginal NVIDIA Unified Graphics Driver that you should have installed for your HP Pavilion p7-1180t Desktop PC. Please uninstall the driver you currently have, deleting it when prompted and install the driver I have provided here. This should resolve your BSOD error.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Envy 5640 - Windows Vista Driver Installation Error - Please Help

Hi
Having problems installing the supplied (and downloaded) driver for our new HP Envy 5640 on my daughters Sony Vaio running Vista.
The printer is up and running and working perfectly on our iOS and OSX Mac devices.
The PC can see and communicate with the Printer.
But when I go to install the supplied (and the downloaded) driver/software it comes up with the following error:
<<
Install Failed
The software required for your printer could not be installed.
For more information click the Details button below.
DETAILS...
The unsuccessfull instalation will be cleaned up, and then you will be guided through searching for and applying a solution to this issue.
>>
Then when DETAILS... button pressed:
<<
Installation Error
Key not valid for use is specified state.
>>
I haven't entered a key, nor a state? I'm in the UK.
Any ideas?
Thanks in advance
Dave

Hello there! Welcome to the forums @Stodgy70
I understand you're facing troubles when installing your Envy 5640 on a Windows Vista system.
After researching the error you're receiving, I would suggest creating a new User Account on the computer and ensuring it has Administrator Privileges, and trying the installation again from there.
Here is the direct link for you to download and install the printer on Windows Vista:
HP ENVY 5640 e-All-in-One Printer series Full Feature Software and Drivers
Please let me know the results, have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Microsoft windows is not genuine error

Hi,
I have installed Symantec Endpoint Protection Antirvirus software in my machine on 2 Jan 2015 but soon restarting my machine I'm getting an error "Windows is not Genuine", Go Online and resolve. I have my Windows
Product Activation key and I have entered the Key many times in order to activate my windows product on my machine; but it is not activation and getting error code 0x80007000D, prompting again that Windows is not genuine.
Apart from this My Office in the same machine have got problems and it is also giving error of invalid software after SEP installation.
Will you very thankful to anyone who will fix the issue.
Please

Hi,
I have installed Symantec Endpoint Protection Antirvirus software in my machine on 2 Jan 2015 but soon restarting my machine I'm getting an error "Windows is not Genuine", Go Online and resolve. I have my Windows
Product Activation key and I have entered the Key many times in order to activate my windows product on my machine; but it is not activation and getting error code 0x80007000D, prompting again that Windows is not genuine.
Apart from this My Office in the same machine have got problems and it is also giving error of invalid software after SEP installation.
Will you very thankful to anyone who will fix the issue.
Please
You should repost in the Windows Genuine Issues forum. Read the directions below before you do:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words, don't post
your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
New
to the Forums?
Note that if you are new to these forums, you may find that you are unable to post due to a restriction on the inclusion of links and pictures.
Simply delete the only lines that contain links - this will allow the remainder of the report to upload (and those lines are not generally
critical to the report anyhow)
Please do not read this sentence. Please ignore the previous sentence.

Java.sql.SQLException: [Microsoft][ODBC Excel Driver] Syntax err

Hi
I am trying to implement the bulk data transfer from source(DB) and target(Excel File) but i am getting the below error.
can some please help me on that.
Knowledge USED:
LKM SQL TO SQL
IKM SQL INCREMENTAL UPDATE
CODE:
create table C$_0Sheet1
*     C1_TEST     NUMBER(15)*
ODI-1228: Task SrcSet0 (Loading) fails on the target MICROSOFT_EXCEL connection Ms_EXCE_TGT.
Caused By: java.sql.SQLException: [Microsoft][ODBC Excel Driver] Syntax error in CREATE TABLE statement.
     at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
     at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
     at sun.jdbc.odbc.JdbcOdbc.SQLPrepare(JdbcOdbc.java:4830)
     at sun.jdbc.odbc.JdbcOdbcConnection.prepareStatement(JdbcOdbcConnection.java:475)
     at sun.jdbc.odbc.JdbcOdbcConnection.prepareStatement(JdbcOdbcConnection.java:443)
     at sun.reflect.GeneratedMethodAccessor70.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$OnDisconnectCommandExecutionHandler.invoke(OnConnectOnDisconnectDataSourceAdapter.java:200)
     at $Proxy2.prepareStatement(Unknown Source)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:83)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:111)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:158)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)

Hi
i refereed the blog and i modified the same but still it is throwing an error.
ODI-1228: Task SrcSet0 (Loading) fails on the target MICROSOFT_EXCEL connection TGT_Excel_TEST.
Caused By: java.sql.SQLException: [Microsoft][ODBC Excel Driver] Syntax error in CREATE TABLE statement.
Code:
create table C$_0POSITION_DEFINITION_ID
     C1_POSITION_DEFINITION_ID     NUMBER(15) ,
     C2_ID_FLEX_NUM___________     NUMBER(15)
The above code is executed in the sql developer and it's successfully created the table.
Edited by: 985498 on May 16, 2013 3:54 AM

Window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"

Hi All
Please help
my server not working showing display error window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"
Please help me how to resolve this issue ???
thnaks !!!

Hi,
If there is any external device plug into your computer, please unplug it and restart the Server.
You can also test the issue in Safe mode.
If it can boot into Safe mode, please update any driver has yellow warning on it, also check if the dump file is existing under %SystemRoot%\, if so, please help to post back for our research.
Kate Li
TechNet Community Support

There must be a real solution to "Windows found driver software for your device but encountered an error installing"

"Windows found driver software for your device but encountered an error installing"
I've spent hours researching this error - Seems like many people have the same issue although there is no difinitive fix or known cause.
I'm hoping someone here has an answer.
Windows 7 Home Premium x64 OEM (HP)
This is not an upgraded Vista system.
It's not a specific driver related issue as it's the same response/effect be it graphics/chip set/usb/printer drivers.
Please dont suggest to flatten and re-install or run a repair install - It's not an option, I only have remote access to the unit
as it's currently in field use.
This is a machine specific issue - identical machine purchased at the same time and configured the same has no issue.
So the story.
User has been fine for weeks - no hardware of software changes except Windows Updates.
A Camera/USB connection that was working no longer does.
Tried in all USB ports
Plug in - windows announces found new hardware, tries to install drivers then fails
with "Windows found software for your device but encountered an error installing ...."
Device manager finds and identifies device although it is in the 'Unknown Device" category.
Manually updating drivers via search/internet or point directly at a driver has exactly the same effect.
Thinking this was just the camera drivers - I researched and downloaded new drivers from camera manufacturers sites
Fuji and Canon.
Same effect.
Deleted/uninstalled drivers completely, deleted/uninstalled all USB root hub and USB devices (hidden and visible)
SFC /Scannow finds no error
Cold boot finds USB and chipset(?) devices on boot attempts to reinstall then we get
"Windows found driver software for your device but encountered an error installing"
So now I have no usb devices at all - memory stick/card reader/printer...... nada.
in fact if I try to update any device driver I get the same message generated.
Restore point does not help either.
After much trawling I found reference to a permisions issue and stale driver cache data.
(This is using an administrator account - not user with admin permissions?)
I'm willing to try anything at this time
I deleted the infcache.1 and other .dat files under c:\windows\system32\driverstore
Copied the usb .inf and .pnf from the appropriate FileRepository directory into c:\windows\inf
Uninstalled all the usb/unkown devices from device manager again.
Rebooted
Takes a little longer to boot as I take it it's rebuilding the driver cache then
a very short hurrah!!!
I can now use usb memory card and pen drives - no issue
Plug in a camera or printer...
"Windows found driver software for your device but encountered an error installing"
Several attempt at this trying different driver versions.
It should not be vendor specific, the other field machine that works is using Microsoft drivers for these devices.
I even copied the drivers from one machine to the other - repeated everything above...
"Windows found driver software for your device but encountered an error installing"
And then the nail in my sanity
Try windows update....
Reboot
"Windows found driver software for your device but encountered an error installing"
but this time its different.
The device it thinks it cannot install is the generic MTP-PTP drivers (Photo Transfer Protocol -so am I getting somewhere)
so it still finds but cannot install.
The cameras are always found but appear as 'unknown devices' and cannot be accessed
Uninstall all USB/unkown again - reboot..
Same message and this time I've lost all the USB again.
Restore point to before Win Update gets me USB back again although I still have no cameras - so theres an update issue as well.
This has to be tied down to a file access/ registry problem although I'm loath to go cutting about without some guidance.
I'm no great believer in 'registry cleaners' unless anyone can point to a definitive/no ad's/sales version that really works.
As I said above, flattening/rebuild at this time is not an option - the user is not best pleased and I'm completley stumped.
If anyone has experienced(manu of you have) and fixed(still to find one) this issue please let me know how as soon as possible.
Chris

I know I am replying to an old thread - but I have the answer and resolved this error, and since this message comes up first in search results, and part of my answer came from this thread, I wanted to help someone else as this took an extra
12 hours and a lot of technical insight to resolve. See below for detailed explanation that others ask for above.
My original issue was that iTunes didnt reinstall. generating this error that said I am trying to access an unavailable network resource and to browse to find itunes64setup (again). This may partly have been due to me deleting old install version folders.
Research led me to completely uninstall apple products and reinstall per their instruction and fixed the issue with iTunes. see
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
The SAME error I had while updating itunes recurred while uninstalling it from my Windows 7 SP1 system...so I went to microsoft Fixit and attempted to correct and it properly uninstalled iTunes for me, which allowed the reinstall.
What didnt work was my USB web root/ root hub, which partly involved my older system and USB 1.0, and the delete/reinstall existing drivers with the c:\windows\winsxs folder as source of drivers (thank you Magon Liu!!!) which I had to figure out what/why
and how.
Then I had an intel chipset issue...my new Iphone wasn't recognizing in plug and play, and there was an error with installing the device drivers for my new iphone 6. Manual applications didn't work, even though a generic device showed in control panel -
device manager with a yellow !
Per above blog answer - I tried to remove and reinstall my USB controller or update the drivers (I have an Alienware M15 laptop - a few years old.) I discovered that the USB host controller - an Intel(R) 5 Series / 3400 Series Chipset family USB Enhanced
Host controller - (port) was not covered by current Intel chipset programs which are Series 6 and later, but did have an update (8/20/2009 v9.1.1.1020) that supported USB 2.0 (and therefore 3.0 backwards compatibility which as an issue with my new iPhone
and some USB thumb drives.) To find this I had to look at the Support - Downloads and Drivers - browse for drivers and somewhere found an option to look for older no longer supported drivers. I found infinst_autol.exe for my case.
Once downloaded I tried to install and failed. Found the log in C:\Intel\Logs and contains:
[InstallDev]
          [Device]
            Driver = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            INF = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            Installed INF =
            Previous driver package =
!           Warning 0xE0000235: DriverPackageGetPath failed.
            Difx = 64 bit
Execute command: C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\x64\Difx64.exe -DriverInf "C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf" -Flags 20 -KeyPath "Software\Intel\Difx64"
            Using RegDeleteKeyEx
!!!         ERROR 0xE0000246: DriverPackageInstall generated an unexpected error
HERE'S THE ADDED EXPLANATION TO BRIAN'S POST THAT EXPLAINS THE SECURITY ISSUE:
This turned out to be an error for two reasons. First, after manually running the command in an "run as administrator" window (same error result), thinking it related to my anti-virus (turned that off/disabled firewall and A/V), and from this thread
granting my user administrative rights to files in an install folder and trying to reinstall inf files and drivers from C:\Windows\winsxs vs my copied infinst_autol.exe expansion (as found from log in C:\Users\David Samuels\AppData\Local\Temp\IPMx7\WIN7 folder).....that
there was an easier solution as the reason this error actually happens is a permissions problem.
To access the proper windows system folders - you have to be the TrustedInstaller service - not just in the administrator group...or you have to be the actual "Administrator" account. To become actual administrator on
your own laptop, Open a command window "run CMD.exe as administrator", then execute command
> net user administrator /active:yes
This creates a local PC Administrator account with no password. Coincidentally it has proper permissions to windows directories for installing drivers. Log in as this user, go to device manager and update the USB hub and any other drivers. if updating the
USB root - it doesn't replace it right away as the system cant disable the currently resident in memory "running" driver - you have to update, then restart the system, log in as administrator and repeat at the next lower layer that has issues.
Once completed - log in as yourself again and disable the administrator account in a command window with > net user administrator /active:no
This in my case enabled all my USB 2.0 and 3.0 devices on my originally only USB 1.0 laptop and everything else works properly again - I hope this helps many of you to resolve your own issues that were difficult to find and resolve and that got as far as
this thread. Good luck!
Regards,
Dave Samuels

An error occurred while reconnecting P: to \\JSERVER\Data Microsoft Windows Network: The network path was not found. This connection has not been restored.

Almost every day when I open my computer I get this message:
An error occurred while reconnecting P: to \ \ JSERVER\data Microsoft Windows Network: The network path was not found. This connection has not been restored.
We then have to go through the process of resetting everything from start to finish just so I can connect to the server. There is no reason that we can find that causes this other than maybe windows updating every night. Any suggestions as to how to
fix this?

it sounds like you have a network drive you are trying to map even though you are not logged in maybe in a script or task instead of backing up to :P backup to the share, make sure you have security set properly to run the task when not logged on.
I assume you are running a backup of some sort as this is the backup forum..

Error message-The installer has insufficent privileges to modify this file:C:\Program Data\microsoft\windows\start menu\programs\iTunes\.iTunes.ink

error message-The installer has insufficent privileges to modify this file:C:\Program Data\microsoft\windows\start menu\programs\iTunes\.iTunes.ink
How do I correct this to download iTunes so it will run?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

"[Microsoft][ODBC Microsoft Access Driver] Syntax error in field definition

I am creating a program in Java which has a Database reference application.The Database I am using is MS Access.But whenever I am trying to run the program from DOS Prompt(ie executing the program:java <program name>) I am unable to connenct to the database.The compiling of the program doesn't show any error(ie javac <program name>) The following error is displayed at the DOS Prompt:
"[Microsoft][ODBC Microsoft Access Driver] Syntax error in field definition."
Pls give me a detailed help report.If it is a Machine side problem do help me to solve it.Mine is a Compaq Presario Machine,OS:Windows 98,Database:MS Access(Office XP)
I request you to help me in this matter.Pls email ur responses to:
[email protected]
[email protected]

hi there
did u configure ur ODBC setting if no then try these steps
================== ODBC Settings ========================
step 1 : go to control panel
step 2 : ODBC Data Sources
step 3 : click UserDSN Tab
step 4 : click ADD Button , Select Microsoft Access Driver , Finish
step 5 : Give Datasource Name as "DATABASE_NAMEXXX" , no double quotes
step 6 : use Select and select Database_NAME.mdb from <INSTALL DIRECTORY>\DATABASE_NAME.mdb
click ok , ok finish
<INSTALL DIRECTORY> is where yr database is
=========================================================
then in yr program
URL for yr database
"jdbc:odbc:DATABASE_NAMEXXX" // as name in step 5
and Driver is
"sun.jdbc.odbc.JdbcOdbcDriver"
if u done all these steps then check yr spelling of table and tabel field in yr program
hope this works for u
regards
Satinderjit

Java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]Syntax error

Hi all,
I am able to INSERT and SELECT records from FoxPRo database successfully.
The driver is Sun JDBC-ODBC bridge
The DELETE statement throws no exception.
I've tried to execute PACK after the DELETE call and got following exception:
java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]File must be opened exclusively.So I tried USE MYTABLE EXCLUSIVE in a Statement before calling PACK and got the exception:
java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]Syntax error or access violationI've also tried inserting the USE MYTABLE EXCLUSIVE before calling DELETE but got the same exception above.
The ODBC DSN for MYTABLE is setup as:
- Free Tables (not database)
- Null (checked)
- Deleted (checked)
- Fetch data in background (checked)
I am not able to issue any of the following commands to FoxPro using java
OPEN - To open a table
CLOSE - To close a table
USE - To open a table for uer either in exclusive mode or shared mode
The exception being generated is :
java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]Syntax error or access violationThe help file of the Microsoft Visual Foxpro Driver states that the driver has support for the above commands.I a not able to get the way to issue the above commands to the driver using java.
In setting up the ODBC DSN I saw no "read only" setting.
In the Visual Foxpro table, I saw no READ ONLY settings.And also, there are no delete permission grants and there is no user database sesssion concept.
I've tried all of the above with DSN mapped to a database(NOT free tables) and setting AUTO-COMMIT OFF and AUTO-COMMIT ON.But in vain. The same exceptions as those stated above persisted.
Environment:
Microsoft Windows XP Professional
JDK version "1.4.2_09"
Microsoft Visual Foxpro 06.00.8167
Microsoft Visual Foxpro Driver 6.01.8629.01
Don't know what else to try.
Can anybody please help me.
Thanks in advance
Archana

java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]File must be opened exclusively.
In the Visual Foxpro table, I saw no READ ONLY settings.And also, there are
no delete permission grants and there is no user database sesssion concept.
The ODBC DSN for MYTABLE is setup as:
- Free Tables (not database)
- Null (checked)
- Deleted (checked)If you're using Visual Foxpro database(.DBC), you should see "Exclusive" option too. You can try check it, but I don't know whether your issue will disappear.

Error: [Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream

hello,
our application vendors are receving the below errors while running their data load job.I spoke to our networking team member and he said everything looks good on the networking side .Can someone please help me with the below errors.we are using
Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64) Enterprise
Edition: Core-based Licensing (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1).
Windows OS:windows server 2008 R2 sp1
7280
6920
DBS-070401
6/5/2014 1:17:24 PM
|Data flow DIM_CONTRACT_SWAM_INIT_LOAD_DF|Loader Key_Generation_DIM_CONTRACT
7280
6920
DBS-070401
6/5/2014 1:17:24 PM
ODBC data source <HPWDBOE001> error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server
7280
6920
DBS-070401
6/5/2014 1:17:24 PM
Driver][DBNETLIB]ConnectionWrite (send()).
7280
6920
DBS-070401
6/5/2014 1:17:24 PM
[Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.>.
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
|Data flow DIM_EMPLOYER_GROUP_SWAM_INIT_LOAD_DF|Reader TCRdr_9
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
ODBC data source <serverName> error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver]Protocol error in
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
TDS stream
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionRead (recv()).
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
[Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.>.
I googled and found the below link the below link which asked me to enable named pipes.I enabled
namped pipes in the sql server Network configuration.I havent yet restarted the sql services as this is a prod box.I will do it later in the evening today.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/69149a71-3c15-4c95-9f95-a30db458abeb/sql-server-2005-communcations-errors-through-odbc?forum=sqldataaccess
Can someone help me with these errors.
Thanks
lucky

Thank you Erland.
I dont see any crash dumps in sql server.I checked the tcp chimney and its set to automatic.I am not knowing what to look at to resolve this issue.
if its the issue with the client API can i ask our vendor to check the client?
Our networking member gave the following report:
No problems on vlan 14 or your port the top is from the switch to your server then bottom is from my pc to your server
SP_DC_CORE_VSS# ping 10.10.12.228
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.12.228, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
SP_DC_CORE_VSS#
lucky

Initialization error: Loading jdbc driver

Hi ,
In a file-XI-JDBC scenario, i am getting this error. "Initialization error: Loading jdbc driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver' failed: java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver".
but i have installed/deployed third party SQL driver on J2ee server thru SDM.
Can any one sort out this problem.
Rgds
Sridhar

Hi,
try looking into the log viewer in Vsual Administrator. Usually you can find more information about the problem there.
Also try redeploying the driver again.
cheers,
naveen

Microsoft-Windows-StorageSpaces-Driver Initialization error

Similar Messages

Maybe you are looking for