Microsoft works 8 calender error message

error report says modname wkcalac.dll and wont open the program
can any body shed some light?

It is a Microsoft problem and you can try to find explanation on some Microsoft site. You are absolutely right because this file is responsible for Works Calendar AppControl. If there is problem try to reinstall Works again. Maybe is this file corrupted or damaged.

Similar Messages

Previously posted troubleshooting doesn't work for my error message "iTunes could not back up the iPhone because an error occurred". What other options do I have?

Previously posted troubleshooting doesn't work for my error message "iTunes could not back up the iPhone because an error occured". What other options do I have to backup my iPhone data properly?

Hi there kchagape,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
-Griff W.

Since uploading Maverick, my Microsoft apps give an error message "(the app) quit unexpectedly. Click Reopen to open the application again." However, this does nothing but renew this window. What to do?

Since uploading Maverick, all of my Microsoft apps give an error message "(name of the app) quit unexpectedly. Click Reopen to open the application again." However, this does nothing but renew this window. I have to click on the "OK" button to get rid of the error message. What to do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

TS3276 The links within all my incoming emails don't work. The error message= No associated application could be found.

In all my incoming messages, links do not work. The error message reads=No associated application can be found. Any hints?

Open Safari. From the Safari menu bar click Safari > Preferences then select the General tab.
Select Safari from the pop up menu next to: Default web browser
If that doesn't help, launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk Permissions
Restart your Mac when it's finished.
Try Mail.
messaged edited by: cs

Cant install Itunes on my work computer, get error message Apple Application support not found, so i uninstall and reinstall again and its the same message

cant install Itunes on my work computer, get error message: "Apple Application support not found, so i uninstall and reinstall again and its the same message

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2

Installing Microsoft Office Suite, and error message re: StuffIt Expander

Hi,
I recently tried to install Microsoft Office Suite (Office2001-906UpdateEN.bin) on my computer, but keep getting an error message saying "Sorry, but this version of StuffIt Expander requires version 6.5 or newer of the StuffIt Engine. Error -43" I have StuffIt Lite 6.5.1 in my Applications folder, which includes StuffIt Expander. However, when I try opening StuffIt Expander, I get an identical error message. Can anyone help?
(FYI, since erasing my hard disk and reinstalling my applications recently, I've experienced other problems, too, such as AppleWorks' spell-check function not working, and MacLink no longer being available. I don't know if any of these problems are related -- and/or if I just made mistakes in reinstalling?)
Thanks.

Hi, Elizabeth -
You should be able to download the newer version of Stuffit Expander, since downloading does not involve unstuffing. Once the download has been received, your browser may be trying to invoke the version of Stuffit Expander that's on your drive in order to automatically unstuff it for you - and that's what is causing the message to be displayed.
Look for the uncompressed download, probably in a .sit or .sit.hqx format.
Then insert your latest OS 9 Install CD, and locate the Aladdin Software folder. For install CDs for OS 9.1 and later, that will here - (CD) >> Software Installers >> Aladdin Software. For install CDs for OS 9.0.4 and earlier, it will be here - (CD) >> Software Installers >> Internet Access >> Aladdin Software. Dig into the Aladdin Software folder, and you'll find an uncompresssed copy of Stuffit Expander, v. 5.5 or v. 6.0. Copy that version to the Hard drive.
Then drag the icon of the freshly downloaded (and still compressed) newer version of Stuffit Expander onto the icon of the older version of Stuffit Expander, and let go when the icon highlights - it should then be decompressed without problem.
Once that is done, run the installer for the new version.

Aperture help not working - getting JavaScript error message

My Aperture 3 has been having a lot of strange issues lately, most, but not all of which have been cleared up by holding down command + option while starting up and going through all three of the choices there.
One problem that remains is the inability to open the Help files. I keep getting the following message:
“The Help Library requires JavaScript.
If JavaScript is not enabled, you will not
be able to view all the content.”
Help works in all other applications, like Pages and Final Cut Pro. I don’t get JavaScript error messages in any other applications.
I’ve already done an erase and restore from a Time Machine backup, and an archive and install. I reinstalled Aperture, although not by using the Terminal command suggested in the kbase article # HT3805.
If I go the Terminal command route, will I lose all my projects, albums, and editing? What about Mobile Me galleries?
I have a guest user on the computer, and when I log on to that user and open Aperture, the Help Library works fine. So, I know the problem is in my user account somewhere, but I don’t know how to address it. Any ideas?

Welcome to the forums.
The fact that you have access to java in another user suggests that it is a local setting or preference.
In the applications folder/utilities there is an application Java Preferences, try resetting this and seeing if it works.
If not, try deleting the java preferences file in your users folder
systemHD/Users/user/Library/Preferences/com.apple.java.JavaPreferences.plist
relaunch the app Java Preferences which creates a new preferences file for you, then try Aperture again.
Let us know how this goes.
Tony

Creation of work center CR01 (error message in last page)

Hi
During creation of work center .After all the configuration being done ,in the last page the error message displayed is (ACTIVITY SET CAN NOT BE ALLOCATED TO 2009).
Some of the major setting done in the last page is
This is Costing Lab
1) work Center
2)Activity description (Like set up, Machine and Labouring)
3)Selection of activity type
4)Preferred Unit
Per
After this when i save the error message is displayed mentioned above (Message number is KL008)
Please help ....!!!!!
Thanks in advance
Rupesh Jha

Dear Rupesh,
1. Please enter the CCtr categories value as "*" in the basic data tab.
1)in KL02 for this particular activity type give as *
2. Enter ATyp category field value ar "1" in the basic data tab.
2) in the field A type mainatin -1
3. Actl Acty Type Cat field value as "As in planning".
in this field also mainatin as 1
YOU MUST SPECIFY A COST ELEMENT FOR ACTIVITY CAT 1
first creat a cost element in KA01 (pramairy) & in KA06 (secondry)
then asiign in KL02 for the required activity types
Regards
kumar

ADOBE READER 8.1 WILL NOT WORK-KEEP GETTING ERROR MESSAGE 1606: COULD NOT ACCESS NETWORK LOCATION %APPDATA%

Have tried to uninstall the Adobe Program but it will not let me. I keep getting the 1606 error message. I have went to the Microsoft Help site and it says that the registry may need to be modified. They also advised you that if you do not modify it correctly you may have very serious problems.

Please see this Microsoft KB article http://support.microsoft.com/kb/886549/
Some registry entry may have been corrupted, and it needs to be fixed. If you don't know how to edit the registry, do you have somebody who is confident enough to edit the Windows registry?
Anyway, for now I just want you to check something in the registry - don't modify anything yet!
Click Start | Run | type regedit [Enter]
Once the Registry Editor is open, drill down to the following subkey
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
In here you should see multiple entries, one being AppData - what is the data value on the right side? It should be %USERPROFILE%\Application Data.
Please close the registry editor now, and report back what you found.

Email button error works but gives Error message "10"

I have "attach to email" buttons on my forms. I leave the email address blank for the person to fill in themselves. It works fine but on one form (and one form only) when clicking on the button an error message window comes up - with exclamation mark and the number "10", that's it. The button works (attached the file to an email) but still gives the message. My other forms don't give this message though the buttons appear identical.
What could be causing this?
(Livecycle 8.0)
Thanks in advance, Marg

Remove the "mailto:" from the Submit tab if you have the script code written in the event.
But usually if you have "mailto:" in the submit tab and while you are preview mode, it will open two email windows. A new email with the subject as "Form Returned"..(This new email error will work only if Acrobat Pro is used by the Designer while previewing the form. If the Designer uses Acrobat Reader while previewing it does not even show any error and simply quits. You can check which one is used while previewing by going to your Windows -> Task Manager and see which EXE is running. For Acrobat Acrobat.EXE and for Reader it will be AcroRd32.EXE).
Try removing the mailto: from the Submit tab and if you still have issues, may be you can send the file to [email protected] , I can have a look at it..
Thanks
Srini

Photoshop CS5 "Help" function not working - Adobe Air error message?

Installed Photoshop CS5, and thought everything was working okay, but when I click on Photoshop Help, I get the error message "Adobe Air - This installation of this application is damaged. Try re-installing......" I have re-installed first Adobe Air, same problem and then uninstalled and re-installed Photoshop CS5, but the problem remains. When I first tried to use the Help function it tried to update something and for some reason this failed. I'm wondering if others have seen the same problem and know of a solution? Thanks, David.

Hello: there may be a configuration issue going on here. I have escalated this issue to our Help app engineering team. In the meanwhile, please try the following:
Uninstall the Adobe Help application: go to your Application folder > Adobe > Adobe Help (drag it to the Trash)
Delete the following directory:
USER NAME (home) > Library > Preferences > chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.
Empty the Trash
Manually update the application via this link: http://www.adobe.com/support/chc/
Select "Photoshop" in Step 1 and then click the Install badge in Step 2. Make sure to select "Open" (and not Save) in the installation dialog box to fully update the app.
Note: The previous instructions did not include deleting the old application or its preference file. This will help ensure that it is thoroughly updated.

Replaced hard drive on my iMac running OSX 10.9.3 now CS4 Master Collection Not working. Receiving error message 150:30 - help.

I have had to replace the hard drive on my iMac running OSX 10.9.3 and reloaded my CS4 Master Collection from Time Machine. I am receiving error message 150:30 saying License has stopped working what should I do?

Unfortunately, you can't install Adobe applications by copying them from a backup, or using the Migration Assistant on a Mac. There are too many support files scattered throughout your drive which aren't moved to the correct location.
First, you'll have to use Adobe's Cleaner Tool to remove all of the stuff you copied:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then reinstall CS4 Master Collection from your original discs, or a backup of the downloaded files. If you don't have either, you can download Creative Suite from this link:
Other downloads

Printer stopped working. Different error messages for each application.

Hello. Recently I have been unable to print anything from any application and get different error messages from each application. For example:
Word says "Word cannot print due to a problem with the current printer. Make sure you have a printer selected in Print Canter. You may need to print again or adjust your printer settings."
Entourage says "An error occurred while printing. Not enough memory."
Excel says "Microsoft Excel could not communicate with the printer."
Preview says "Print. Error while printing."
I have tried installing new drivers, repairing the disk and permissions, and deleting and adding the printer from the System Preferences.
I am running OS X 14.4.10 on an iMac G4 1.25 GHz PowerPC with 256 MB DDR SDRAM.
Any ideas? Thanks.

Try downloading the 10.4.10 Combination Updater from Apple and re-update.
If that doesn't help try the free trial of Printer Setup Repair from www.fixamac.net.
If those don't help, reinstall OS X using the Archive & Install option in the installer.

HT5568 My update for Safari 6.02 doesn't work, yours? Error message on download begin.

Error message:
The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102)

lol - pardon the reality check, but if a bad update is offered even for a few seconds, there will be a certain number of people who manage to hit that narrow window and try to download it, and a certain number of those will end up here with terror in their hearts. That's the statistics of very large populations; it's almost as unavoidable as Brownian motion. You guys drew the short straw this time around, it will be someone else next time, but there will always be someone in this fix. Sometimes fast is actually too fast.
I know it's a horrifying thought (and there's not as much sarcasm in that as you might think, because I define the term 'computer junkie'), but this is a smoke-em-if-you've-got-em moment. We all just need to let go and do something else for a while, and not worry about it. the thought sends chills up my spine...

Itunes not working on pc. error message at start up?

I'm getting a error message at PC start up. and also error message when trying to start iTunes.
I did a recent iTuens update. Is there a fix?

This application has failed to start because MSVCR80.dll was not found. Reinstalling the Application may fix your problem.
Many thanks. Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Microsoft works 8 calender error message

Similar Messages

Maybe you are looking for