Microsoft.XMLHTTP with C at a flights Database

In Oracle DB there's a way to convert XML file, and to do it with C++ ?
I need to get DB of flights, I've checked a site with data on flights to israel from company named ARKIA and in the source code it says "Microsoft.XMLHTTP". means I can talk with them and if I am getting to access to their DB - means I can get the XML data with C into the Oracle Database?
Cheers!

Your PageDownload code has no non-static code other than the blank class instantiator. You shouldn't be calling a static method from an instance of the class. You could just as easily say:
PageDownload.main(null);
instead of:
PageDownload pagey = new PageDownload();
pagey.main(null);
the PageDownload class needs no instance since it has no object code of any value.
Re-think the design a bit, the pattern looks bad.
If your intention for the PageDownload class was to create a singleton then search the tutorials for the proper way to construct singletons, also decide wether or not you need this class to be a singleton.
Also output some of the error information to help diagnose what exactly is wrong with the URL, ie, try to output the URL, maybe it's blank

Similar Messages

  • Lync 2013 Error 31055 ,31059 LS Call Park Service, The database being used by Group Pickup is not the appropriate version and There was a problem communicating with the Group Pickup backend database.

    Hello
    I have Lync 2013 and 2010  , still i didn't finish my migration completely from 2010 to 2013 .this  is  coexistence environment that contains both Lync Server 2010 and Lync Server 2013 .
    There was no error's in my lync 2013 front end and back end server's and every thing was fine, yesterday I installed windows updated AND CU for my lync 2013  front end and backend server's .
    later on after restarting both the front end and the back end server's i start having hundred's of  these error's related to "LS Call Park Service".
    so any advice for these issue ? and what is the effect for these error .
    below is the error I got .
    The database being used by Group Pickup is not the appropriate version.
    The database is not the correct version:
    Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Expected... SchemaVersion: 1, SprocVersion: 1, UpgradeVersion: 2
    Actual...   SchemaVersion: 0, SprocVersion: 0, UpgradeVersion: 0
    Cause: The database has not been upgraded.
    Resolution:
    Upgrade the database to CU1.
    ==============================================================
    There was a problem communicating with the Group Pickup backend database.
    There were problems accessing SQL server:
    Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
    Error code: -2146232060
    Error number: 229
    Cause: This may be caused by connectivity issues with the backend database.
    Resolution:
    Check if SQL backend is running and accepts connections from Group Pickup.
    =============================================================================
    Kind Regards
    MK

    Hello
    thanks Holger for u r replay .
    due to the Microsoft article about the cu :
    I run only :
    Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose
    Note In a coexistence environment that contains both Lync Server 2010 and Lync Server 2013 and in which the Central Management Service is located on a Lync Server 2010 pool, do not run the
    Install-CsDatabase -CentralManagementDatabase command. If you later move the Central Management Service to a Lync Server 2013 pool, you have to run the
    Install-CsDatabase -CentralManagementDatabase command to apply the changes.
    here is what I get on my power shell after i run the command : "WARNING: Warning: Failed to execute batch --"
    PS C:\Users\MK> Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn HQ-LYNC2013-BE.MyDomain -Verbose
    VERBOSE: Creating new log file
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.xml".
    VERBOSE: Install databases required by Lync Server role(s).
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcxds.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcab.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsconfig.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsdyn.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database cpsdyn.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsLog.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsCDR.
    VERBOSE: Assigning "BackendStore:BlobStore:LogPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:RtcSharedDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ABSStore:AbsDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:BlobStore:DbPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:RtcSharedDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ABSStore:AbsDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:DbPath" to F:\CsData
    VERBOSE: Installing "BackendStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcxds.
    Checking state for database rtcxds.
    State of database rtcxds is DbState_RequiresMinorUpgrade.
    Database rtcxds set to mode Restricted.
    Dropping all procedures, functions and views from database rtcxds.
    Executing RtcDb.sql...
    Adding master role...
    Setting owner for database rtcxds to sa.
    Creating login MyDomain\RTCHSUniversalServices.
    Creating user MyDomain\RTCHSUniversalServices.
    Creating Schema MyDomain\RTCHSUniversalServices.
    Creating login MyDomain\RTCUniversalReadOnlyAdmins.
    Creating user MyDomain\RTCUniversalReadOnlyAdmins.
    Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
    Creating login MyDomain\RTCUniversalServerAdmins.
    Creating user MyDomain\RTCUniversalServerAdmins.
    Creating Schema MyDomain\RTCUniversalServerAdmins.
    Adding account MyDomain\RTCHSUniversalServices to role ConsumerRole.
    Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ConsumerRole.
    Adding account MyDomain\RTCHSUniversalServices to role ReplicatorRole.
    Adding account MyDomain\RTCHSUniversalServices to role PublisherRole.
    Adding account MyDomain\RTCUniversalServerAdmins to role PublisherRole.
    Setting database version: Schema Version 15, Sproc Version 13, Update Version 2.
    Setting the database rtcxds to multi user mode.
    Database rtcxds is set to multi user mode.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcshared.
    Database created by script "RtcSharedDatabase" already exists and is current.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-BackendStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_01].log"
    VERBOSE: Installing "ABSStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcab.
    Checking state for database rtcab.
    State of database rtcab is DbState_RequiresMinorUpgrade.
    Database rtcab set to mode Restricted.
    Dropping all procedures, functions and views from database rtcab.
    Executing RtcAbTypes.sql...
    WARNING: Warning: Failed to execute batch --
    -- Copyright (c) Microsoft Corporation. All rights reserved.
    exec sp_addrole N'ServerRole'.
    Executing RtcAbDb.sql...
    Setting owner for database rtcab to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Setting database version: Schema Version 62, Sproc Version 42, Update Version 3.
    Setting the database rtcab to multi user mode.
    Database rtcab is set to multi user mode.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ABSStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_20].log"
    VERBOSE: Installing "ApplicationStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsconfig.
    Database created by script "RgsConfigDatabase" already exists and is current.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsdyn.
    Database created by script "RgsDynDatabase" already exists and is current.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database cpsdyn.
    Checking state for database cpsdyn.
    State of database cpsdyn is DbState_RequiresMinorUpgrade.
    Database cpsdyn set to mode Restricted.
    Dropping all procedures, functions and views from database cpsdyn.
    Executing CpsDyn.sql...
    Setting owner for database cpsdyn to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Creating login MyDomain\RTCUniversalReadOnlyAdmins.
    Creating user MyDomain\RTCUniversalReadOnlyAdmins.
    Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
    Creating login MyDomain\RTCUniversalServerAdmins.
    Creating user MyDomain\RTCUniversalServerAdmins.
    Creating Schema MyDomain\RTCUniversalServerAdmins.
    Adding account MyDomain\RTCComponentUniversalServices to role ReadWriteRole.
    Adding account MyDomain\RTCUniversalServerAdmins to role ReadWriteRole.
    Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ReadOnlyRole.
    Setting database version: Schema Version 1, Sproc Version 1, Update Version 2.
    Setting the database cpsdyn to multi user mode.
    Database cpsdyn is set to multi user mode.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ApplicationStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_37].log"
    VERBOSE: Installing "ArchivingStore" on HQ-LYNC2013-BE.MyDomain\arc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsLog.
    Database created by script "ArchivingDatabase" already exists and is current.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ArchivingStore-HQ-LYNC2013-BE.MyDomain_arc-[2014_11_13][14_35_51].log"
    VERBOSE: Installing "MonitoringStore" on HQ-LYNC2013-BE.MyDomain\mon, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsCDR.
    Checking state for database LcsCDR.
    Checking state for database LcsCDR.
    State of database LcsCDR is DbState_RequiresMinorUpgrade.
    WARNING: The database LcsCDR being updated has data file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf. Supplied path will be ignored.
    WARNING: The database LcsCDR being updated has log file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf. Supplied path will be ignored.
    Database LcsCDR set to mode Restricted.
    Dropping all procedures, functions and views from database LcsCDR.
    Executing CdrDb.sql...
    Setting owner for database LcsCDR to sa.
    Creating login MyDomain\CSAdministrator.
    Creating user MyDomain\CSAdministrator.
    Creating Schema MyDomain\CSAdministrator.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Adding account MyDomain\RTCComponentUniversalServices to role ReportsReadOnlyRole.
    Adding account MyDomain\CSAdministrator to role ReportsReadOnlyRole.
    Setting database version: Schema Version 39, Sproc Version 82, Update Version 2.
    Setting the database LcsCDR to multi user mode.
    Database LcsCDR is set to multi user mode.
    SQL Server Agent is running and its start mode was detected as Auto.
    Executing CdrJobs.sql...
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.QoEMetricsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database QoEMetrics.
    Checking state for database QoEMetrics.
    Checking state for database QoEMetrics.
    State of database QoEMetrics is DbState_RequiresMinorUpgrade.
    WARNING: The database QoEMetrics being updated has data file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf. Supplied path will be ignored.
    WARNING: The database QoEMetrics being updated has log file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf. Supplied path will be ignored.
    Database QoEMetrics set to mode Restricted.
    Dropping all procedures, functions and views from database QoEMetrics.
    Executing QoEDb.sql...
    Setting owner for database QoEMetrics to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Setting database version: Schema Version 62, Sproc Version 90, Update Version 1.
    Setting the database QoEMetrics to multi user mode.
    Database QoEMetrics is set to multi user mode.
    SQL Server Agent is running and its start mode was detected as Auto.
    Executing QoEJobs.sql...
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-MonitoringStore-HQ-LYNC2013-BE.MyDomain_mon-[2014_11_13][14_35_51].log"
    VERBOSE: No changes were made to the Central Management Store.
    VERBOSE: Creating new log file
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
    WARNING: "Install-CsDatabase" processing has completed with warnings. "5" warnings were recorded during this run.
    WARNING: Detailed results can be found at
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
    PS C:\Users\MK>
    I hope some one can confirm no issue with what I did ??
    Kind Regards
    MK

  • What are the Benefits of Synchronizing/ Replicating Project Online with an on-Premise SQL Database

    Hi
    What are some of the reasons and/ or benefits that one may want to consider with regards to setting up and synchronizing Project Online with a on-Premise SQL database ?
    \Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

    Spiro,
    Reporting via Project Online is limited to OData, and writing queries with OData starts getting complex at a certain point.
    So, if your organization in using third party BI tools, or want to use OLAP cubes, or in general want to use straight SQL queries instead of oData, it is generally beneficial to have the data in house for reporting.
    So in general, using the SQL Synchronization, will bring data into "your" organization, as opposed to being with Microsoft so you get a LOT more flexibility with reporting.
    Hope this helps your question.
    Cheers,
    Prasanna Adavi, Project MVP
    Blog:
      Podcast:
       Twitter:   
    LinkedIn:
      

  • Error : There was a problem communicating with the Group Pickup backend database.

    Hi , 
    I found this error in Event viewer for Every 2 min on lync server 2013 :
    There was a problem communicating with the Group Pickup backend database.
    There were problems accessing SQL server:
    Connection: Data Source=(local)\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
    Error code: -2146232060
    Error number: 229
    Cause: This may be caused by connectivity issues with the backend database.
    Resolution:
    Check if SQL backend is running and accepts connections from Group Pickup.
    what can i  do ?

    Hi,
    Did you solve the issue with the help of the suggest Anthony provided above?
    If the issue persists, please check if you update the latest vesion of Lync Server 2013. If not, please update it, make sure after install the update for all FE Servers,
    then make sure to update BE Server as well. Then rerun Step 2 Setup or remove Lync Server Components.
    Here is a similar case may help you:
    https://social.technet.microsoft.com/Forums/lync/en-US/3b616e51-93ad-430a-aa93-57c2fd19e0f6/call-pickup-db-issue-after-cu1-update-to-lync-2013-enterprise?forum=lyncdeploy
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Microsoft Access with Unicode

    Hi,
    I recently upgraded my website from CF5 to CF9 running on a virtual server. Below are the specs.
    CF Version: 9,0,0,251028
    Edition: Enterprise
    Operating System: Windows Server 2008
    My old code worked fine except that certain queries were running slow. My hosting provider suggested that I change the driver from "Microsoft Access" to "Microsoft Access with Unicode." As suggested, it did make things much faster. However, there were some pages on my site that didn't work. I did some research and found I had used two "reserved" words for table names that caused the pages to fail when using "Microsoft Access with Unicode" as the driver. Oddly enough, the pages worked fine with the regular "Microsoft Access" driver.
    I am now down to just one error left that I cannot resolve. I get the following error ONLY when using the "Microsoft Access with Unicode" driver.
    Error Executing Database Query.
    Query Of Queries runtime error.
    The select column reference [GetList.ItemNo] is not found in table [GetList].
    This is the code it is referring to.
    <!--- Use QofQ to join queried records against cart data --->
    <CFQUERY NAME="GetProducts" DBTYPE="query">
      SELECT
      GetList.ItemNo AS ItemNo,
      GetList.Item AS Item,
      GetList.Grades AS Grades,
      GetList.Price AS Price,
      GetList.OrderQty AS Quantity,
      (GetList.OrderQty * GetList.Price) AS ProductSubTotal
      FROM GetList
    </CFQUERY>
    Is there an issue with "Microsoft Access with Unicode" not playing nicely with Query Of Queries?
    I would greatly appreciate any help with this issue.
    Thanks,
    Steve

    THANK YOU!  THANK YOU!  THANK YOU!
    I never noticed that I had included the column "ItemNo" more than once (as you can see below). I removed the extra and it worked perfectly!
    Thanks again!
    Steve
    <cfquery name="GetList"
    DATASOURCE="#request.ds#"
    USERNAME="#request.dsuser#"
    PASSWORD="#request.dspass#">
    SELECT
    o.OrderID,
    o.OrderDate,
    o.ShipState,
    o.ShipCountry,
    o.TaxExempt,
    o.PromotionalCode,
    oi.ItemNo,
    oi.OrderQty,
    oi.Price,
    p.ItemNo,
    p.Item,
    p.Grades 
    FROM Orders o,
    OrdersItems oi,
    Products p
    WHERE o.OrderID = #ATTRIBUTES.OrderID#
    AND oi.OrderID = o.OrderID
    AND p.ItemNo = oi.ItemNo  
    </cfquery>

  • Curriculum-info version 7 Microsoft.XMLHTTP

    Hi,
    I'm trying to display the user's Curriculum within a web
    page, using XML and ASP.
    On version 6, this worked nicely, but on version 7, it
    doesn't work. I think this is because the response is a .swf file
    and not HTML. I suspect there's code in the .swf file that doesn't
    allow cross-domains script access, or something, first off, can
    this be disabled, or allow a domain?
    For example, I get the user logged in etc on my web site,
    then I call the following using object
    ...Server.CreateObject("Microsoft.XMLHTTP"):-
    http://serverIP/system/content/curriculum-info/info?account-id=7&sco-id=23053&set-lang=en& user-id=27219&session=breezgzztfew1ughcfb3k
    The response is the HTML page with script tags etc which load
    the Flash object and the CurriculumViewer.swf file with the
    relevant Curriculum.
    Using the full response, I clean up the header info (include
    the script files again) to another ASP page the output loads the
    SWF file (you can see the two panes with legend in the left one),
    but it's empty and doesn't load the Curriculum contents.
    Putting the above URL in the browser it works perfectly. This
    is because it's running off the Connect server, not the web server.
    But I want to do is integrate the contents of the Curriculum in to
    another ASP page. This is how I did it with version 6, but it
    doesn't work in version 7 (I realise the response is completely
    different to version 6, plus the curriculum is flash based).
    Any idea how to enable the cross domain scripting, if it's
    that that's the problem?
    Thanks

    Hello MichaelBate,
    When you can configure the installation Options of Windows SDK for Windows 7, have you checked the Visual C++ Compilers checkbox? See:
    If so, please try the following two methods to see if they are helpful to you:
    1). Please do not select the Visual C++ Compilers checkbox before you install the Windows SDK for Windows 7.
    2). Please uninstall VS2010 SP1 and then reinstall the Windows SDK for Windows 7.
    Please refer to the
    2.1.1. Visual C++ compiler installation fails when the Windows SDK 7.1 is installed, repaired, or modified after Visual Studio 2010 SP1 has been installed part of the
    VS2010 SP1 readme file.
    Thanks.
    Vicky Song [MSFT]
    MSDN Community Support | Feedback to us

  • Dealing with null values from a database (easy?)

    I'm sure this should be a simple question :
    I'm creating a dynamic dropdown of my companies products that once a product is selected draws values (links) from a database and displays them (links to User guides, FAQs etc).
    My problem is dealing with blank entries in the database - i.e. if a product doesn't have a User guide I've left the database blank.
    I'd like to show 'none' or 'not available' if the entry is blank rather than the 'null' I currently get.
    I'm sure it should be a straightforward if .... else .... but I'm struggling and would appreciate any help,
    Many thanks,
    Mo

    Thanks for the message, the cut down piece of code I'm using for the output is:
    <%
    while (rs.next())
    //header row
    out.println("<tr bgcolor='#666666'>");
    out.println("<td><font style='font-family:arial;color:#ffffff;font-size:10px;'>Product Name</font></td>");
    out.println("<td><font style='font-family:arial;color:#ffffff;font-size:10px;'>FAQs</font></td>");
    out.println("<td><font style='font-family:arial;color:#ffffff;font-size:10px;'>Technical Information</font></td>");
    out.println("</tr>");
    //results
    out.println("<tr border='1' bordercolor='#CCCCCC' bgcolor='#FFFFFF'>");
    out.println("<td><font style='font-family:arial;font-size:12px;font-weight:bold;'><a style='text-decoration:none' href=" + rs.getString("ProductURL") + " target='_blank'><font color='#669999'>" + rs.getString("ProductName") + "</a></td>");
    out.println("<td><font style='font-family:arial;color:#000000;font-size:10px;'>" + rs.getString("FAQs") + "</td>");
    out.println("<td><font style='font-family:arial;color:#000000;font-size:10px;'>" + rs.getString("TechInfo") + "</td>");
    out.println("</tr>");
    stmt.close();
    conn.close();
    %>
    It's the FAQs and TechInfo strings I need to use the statement on - if there's no entry show 'none',
    Thanks again,
    Mo

  • Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

    Fresh installation of Exchange Server 2013 on Windows Server 2012.
    Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
    your folders with your Outlook data file (.ost)" is displayed.
    If I turn off cached Exchange mode, setting the email account to not
    cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
    time.
    I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
    Microsoft Exchange RPC Client Access service is running.
    No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
    Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

    So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
    Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
    First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
    Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
    This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
    work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
    In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
    up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
    like OutlookAnywhere - which I might add had their place under that scenario.
    In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
    previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
    EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
    So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
    but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
    users.
    Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
    Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
    certificate.
    See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
    So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
    Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
    always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
    This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
    there is a 3rd - I forgot, but you get the idea).
    Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
    the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
    Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
    NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
    Open Outlook - BOOM! It works... Was it as good for you as it was for me?
    You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
    and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
    So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
    Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
    So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
    SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
    Frustrating beyond reason - that should be Exchange's new slogan...
    Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
    PS
    ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

  • Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profil

    Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
    OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
    and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
    I can log on to the MS Exchange server and see the setup.
    What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
    or programs.
    What can I do?

    The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
    file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
    Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
    was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
    Follow the steps given below to resolve this problem
    1. Recover Navigation Pane configuration file
    2. Repair your Outlook PST file using Inbox Repair tool
    3. Create a new Outlook profil and import data from the old PST file
    4. Turn off Compatibility Mode
    5. Start Outlook in Safe Mode
    For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/

  • TA25361 I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro.  Is there any way to recover this info?  Some documents can be opened and resaved with textedit, but not my database with all important addres

    I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro.  Is there any way to recover this info?  Some documents can be opened and resaved with textedit, but not my database with all important addresses.

    I tried Peggy's List > Select All > Copy > Paste into an AW spreadsheet suggestion.
    In my case, pasting into the spreadsheet lost all text formatting (mostly text set to bold). The results of formulas were pasted, and checkboxes were pasted as "on" or "off". The DB did not contain any pop-up menus or radio buttons, but I expect they would transfer as a number showing the list position of the chosen item.
    Pasting the copied List view data into a Numbers table gave a result similar to that with AppleWorks. I selected B2 as the target cell (for top left cell of the pasted data) to avoid any effects of posting into a header row or column. Bold and regular text formatting looked the same as it had in AW's List view.
    Based on that, I'd slip the 'paste into an AppleWorks Spreadsheet step, and paste directly into a Numbers Table.
    Regards,
    Barry

  • Workflow status column in AllUserData Table with wrong coded in Content Database?

    I would like to write a stored procedure to find out all workflow instances with errors, directly from content database.
    I go to dbo.alllists to find out the workflow status column, and query AllUserData and find out not readable text
    like:
    쳀曩쌙䂻֞鼥
    㖦巀䐝义颹暲ﻇൿ
    ﱰ臨臸䋖ហ嬀ᨵ瘉
    鄌幀鴏䔖튅㐻⩷揬
    묨ή姖䩡ꊎ鉛۬浶
    ⟯봨飮䙕잳摕盜⣢
    屑䳬鑥䶵岿珽磯Â
    ꬁᆈ䀥䓝䶲紀篰䟫
    蓏ꋦ䥌肃瘓⯈᭄
    뵎㎙䈸䪿蔀ࢴ
    ෬꧋辂䘀馻ࡲ琓
    ꞎ鵫䬺ࢬ䀒✫ꡱ
    any ideas?

    Hi,
    Thanks to share your post.
    For the issue, I think it may due to the wrong handling of the encoding type “UTF-8”, please refer to the followed article, they may give you a hand:
    http://blogs.sun.com/shankar/entry/how_to_handle_utf_8.
    http://devlog.info/2008/08/24/php-and-unicode-utf-8/.
    Hope this could help you!
    Leo

  • How to integrate  microsoft outlook with WebAS

    how to integrate  microsoft outlook with WebAS

    Nibu,
    I guess users enumerated enough options in your original thread on different forum: Integration of Web AS and Microsoft OutLook and there is no need for cross-posting
    VS

  • How to create logical directories with same name on two databases

    Hi,
    OS: Windows
    Oracle Version : 10g
    I have to databases in one oracle home. I have created some logical directories in one database. When I am trying to create logical directories with same name in another database, it is overwriting the first database directory paths with the second one
    Can't we create directories with same name but different path in two databases on one machine?
    Pls suggest me on this
    Regards,
    Vijay

    I am trying to create logical directory using CREATE
    DIRECTORY statement. I am very much aware that the
    create directory statement doesn't create directory
    on OS. But we can attach the physical directory on OS
    to logical directory in oracle
    My requirement is to create logical directories in
    oracle mapping the OS directories. Both the
    databases, wil have same logical directory names but
    different OS directory mappingsIf I understand you correctly, you can do this:
    On DB 1
    CREATE OR REPLACE DIRECTORY same_dir_name as 'C:\myoracle\mydir1';
    On DB 2
    CREATE OR REPLACE DIRECTORY same_dir_name as 'D:\myoracle\mydir2';
    What stops you from doing that ?
    Note: If what you have is one database but different connections, then you are connecting to one database. The above second statement will drop and replace with the first one

  • How to connect APEX with MYSQL via Apex's Database link

    How do i connect APEX with MYSQL via Apex's Database link? The OBE doesn't go into specific detail about how to link the two.
    can someone please elaborate on what these are and where i can find them in mysql:
    Database Link Name      
    Connect To Schema      
    Password      
    Remote Hostname or IP      
    Remote Host Port      
    SID or Service Name      
    I need to link to mysql database so I can set up a 3D pie chart in apex

    Hi jononioo
    A database link is a device for connecting between Oracle database instances only. Oracle does have a method for connecting to other database systems (Transparent Gateway) but this is restricted to other commercial databases and I don't believe there is a gateway for Mysql. (I could be wrong)
    I don't know Mysql but maybe there is some way to push data to the Oracle instance. Other than that, is there any reason why the data has to reside in the Mysql database?
    Regards
    Andre

  • Can I use tape drive for backup with win 2012 OS & Sybase database?

    I have installed enhancement package 6 for SAP ERP 6.0 with OS windows 2012 and database sybase ASE(15.7.050). I am facing problem while taking database backup on tape drive. I want to know how to initialize tape drive in case of sybase DB and is it possible to take back-up on same. I failed to schedule backup from DB13 so now I am doing that activity by command line. So please help me to solve these issues.
    Here I am attaching some files related with backup commands that presently I am using. My SAP system ID is DQS.

    That output actually looks pretty good, it was dumping to the tape drive, it just ran out of tape because the drive apparently doesn't automatically detect when it is reaching the end.
    For the next step, try adding a CAPACITY parameter to your dump command as discussed at these places in the documentation.
    Specifying tape capacity for dump commands
    Set the Maximum Capacity for a Tape Drive
    Your output above shows it was able to dump 87565594 KB before it ran out of tape,
    so lets be a little conservative and try
    dump database DQS to TAPE1 with   capacity = 87000000, init
    go
    When the dump reaches that point, ASE should prompt you to pop in another new tape
    and then issue the sp_volchanged procedure from a second session (it will tell you what parameters to use for sp_volchanged).
    Note: once we get the dump working successfully, we can then create a logical dump device that would store the capacity value, and create a full dump configuration so you gain all the new functionality like dump history, etc.
    Enhancements to dump and load
    -bret

Maybe you are looking for

  • Can't get Zip or Jaz Drive to work with PB G4 OS 10.4.7

    Hi All, Please help if possible. I recently upgraded from a PB 3400/G3, "Kanga" to a PB G4. When I used my Kanga I saved tons of files and pictures to my Iomega SCSI 1G Jaz and 100M Zip drives. I would like to transfer all this stuff to my PB G4 but

  • Drop shadow has white boxes Illustrator to Indesign

    MAC OSX G5 Adobe CS2 I know I'm probably being stupid, as no-one else seems to be asking this question, Buuuut... I've created a logo in Illustrator CS2, applied a dropshadow to a couple of areas of it, and now I want to place into my Indesign artwor

  • Getting iChat AV 3 back for iMac

    Bear with me, I'm pretty new to macs. I recently accidentally deleted iChat, much like I have read that someone else had. (post titled: "get ichat back") However, the instructions there did not show how to re-install iChat if you did NOT have a tiger

  • Selection screen urgent

    Hi . Would  you please help me about define a selection with this rules ..On selection screen  select-options date for sy-datum . if radio button A selected I want to refresh date's screen only year and this selection will be in terms of whole year .

  • Acrobat 9 dynamic stamp customized transfer from previous version

    client of mine made a custom dynamic stamp and they can get it set up fine (dynamic field inserted in the stamp) and in the correct folder where it pulls the other stamps, but it is not finding it in the stamp list in the program, is what they've tol