MicrosoftDNS Container Conflict Resolution - Creation times are the same

Everyone,
I am trying to resolve an AD conflict for the MicrosoftDNS container. From my research the general rule appears to be "delete the newer object". The problem I have is that the creation time of both containers is identical:
Class Created DN
container 5/9/2003 17:31 CN=MicrosoftDNS\0ACNF:b8738f66-3c40-47a2-bb20-925ea9c65046,CN=System,DC=<removed>,DC=<removed>
container 5/9/2003 17:31 CN=MicrosoftDNS,CN=System,DC=<removed>,DC=<removed>
The mangled container shows in the default naming context and the CN=DomainDNSZones context but not the CN=ForestDNSZones context (within ADSIEDIT)
The mangled container just holds CN=RootDNSServers zone whereas the "normal" container holds CN=RootDNSServers plus a number of reverse zones and the forward zone for our domain. Some of the zones within the "normal" container show as
"InProgress" but I know what to do with those.
Which container should I delete? My gut says the CNF container...
Thanks in advance for your help,
Kevin

In addition, CNF DNS data Deepdive. Have a look.
http://blogs.msmvps.com/acefekay/2009/09/02/using-adsi-edit-to-resolve-conflicting-or-duplicate-ad-integrated-dns-zones/
Regards,
Biswajit
MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
Blog:
Script Gallary:
LinkedIn:
Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

Similar Messages

*Fix* Usage and Standby Times are the same - iPhone 4S 7.0.4

I'd like to share my experience here because I actually found the solution on here but I'm actually having trouble finding it again.
I had three problems:
1. My standby and usage times were always reporting the same values, thus draining my battery faster than usual. This is not normal behavior; whenever the screen is off it should report standby times, and after the phone is unlocked it is considered usage. They should never be recording in tangent.
2. Whenever I would try to turn off my phone by holding down the power button, the phone would basically restart itself, showing the Apple logo boot screen and then restarting. The only caveat was that it would turn off if it was plugged in and being charged. But take it off the charger and try to replicate it turning off and it would restart.
3. The sound would sometimes think that it was connected to a Dock, so when I went to the Airplay options, they were listed as Dock Connector, Airport Express and Apple TV. There would be no volume slider in the Control Center, and when pressing the volume buttons, there would be no dots, just the bell with a line through it.
Many people might be having genuine battery issues, where you have an older phone and your battery is just really bad and needs to be replaced. My 4S was still under AppleCare in December 2013 and the battery was pretty bad, so I had it replaced in an Apple Store. So for me, the battery life itself was not the problem.
I tried a lot of things to try and fix the above problem but none of them helped. This includes chatting with Apple support (I was surprised they didn't steer me in an obvious direction, considering the large amount of folks who were having these kinds of problems, but they played dumb), restoring fresh and restoring icloud and itunes backups, all kinds of combinations of settings for Mail, iCloud, etc., but nothing worked. I probably restored my phone at least ten times in my troubleshooting efforts. The isolated test of restoring my phone fresh, setting it up to the start screen, making sure the battery was charged 100% and taking it off the charger waiting about 10 minutes. Then I would check standby and usage times.
I had read about fixes for the phone not being able to turn completely off, and it had something to do with cleaning the charging port. I attempted to clean the port with compressed air and other methods, but it never fixed this problem. Then I read a post on Apple Support about a guy who had the exact same problems as I did, then said he changed out his charging port and this fixed it. Well, it was $40 so I paid someone to do it in 45 minutes.
After I got my phone back the problem didn't appeared to be fixed, but after a restore and even with an icloud backup restored with it, I looked down at my phone and presto chango, the times where separate and working as they should. Last night with wifi off while I was sleeping, the battery only went down 3%. I know this is turning out to be a narrative, but I spent a lot of time trying to figure out what the problem was and it was a frustrating process. I'm happy it's resolved.
Apple Support thought it was a corrupt install package from iTunes, or some kind of software glitch or maybe some part of iCloud constantly trying to call home, but it was a combination of both hardware and software. Because of the bad charging port, for some reason the phone thought it was still being used and thus was still treating standby as usage.
I would encourage those that are having this problem to do a test and see if your phone will turn off when you want it to. If it resets automatically and if your standby usage times are the same, replacing the charging port might fix it.

Ever since iOS7.0.6. and still on iOS7.1 both me and my wife had huge battery drain on our iPhone 4S and stand-by was equal to usage time. We finally found the solution to a post of another user on the Dutch Tweakers forum. There seem to be a bug within a certain Dutch coupon app called 'Scoupy' which drained the battery completely although GPS setting was turned of and also 'refresh on background' was off.
Scoupy said that a fix for their app is send for approval to the App Store. We removed the app and our usage/stand-by time is again as normal (higher stand-by time then usage time) and best of all a 'normal' battery use as it was the case on iOS7.0.4. I hope this could help someone. I'm wondering if the iBeacon changes in iOS7.0.6/7.1 together with a bug in the Scoupy app could be the cause? Maybe this is also with our similar apps you have on your phone.

TS1424 Downloaded an album to iPad wireless ok, but when downloaded same album to computer it is incomplete even though the times are the same ?

Problems downloading to computer after downloading to iPad ok, on email receipt tried the report a problem but could not connect to I tunes

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

Possibility of addition creation time in the sales order over view screen

Hi,
Is there a possibility of adding the creation time in the sales order overview screen in VA01/2/3.
thank you

hi,
this is to inform you that,
contact your ABAPER for this is to find out if there any possibility making time field mandatory if it is there in Standard SAP. there in VBAK table i am able to see VBAK - ERZET
or
if it is not available then you need to go for field exit.
hope this helps.
balajia
Edited by: balaji timmampalli achari on Nov 30, 2010 6:11 AM

The ipad won't sync some photos, saying the file can't be read by the ipad, however it will sync some photos taken at the same time which are the same size and file type. Why does it reject some and accept others?

The ipad won't sync some photos, saying the file can't be read by the ipad, however it will sync some photos taken at the same time which are the same size and file type. Why does it reject some and accept others?

Hi there. I'm having the same problem: my iPad won't import some photos from a folder, saying that they can't be read. They are all JPEGS and some photos taken at the same time have synched fine, but out of a folder with 200 photos, it only lets me synch 37. I'm synching albums created via Photoshop Elements 6, which has worked fine until now.
I've tried deleting all photos and re-synching, and have also deleted the iPod Photo Cache, but it hasn't made a difference.
The iPad auto-updated to the latest version of iTunes, so maybe that's what's causing it?
Any advice gratefully received!

My battery runs low very fast (three hours). I looked in the usage settings and it seems the time for usage and stand-by are the same, allthough i did have my iphone on stand-by!! What can i do?

Community,
I have a problem with my iphone 4. Every few months my battery starts draining within a few hours. I have tried all kinds of battery saving tips, but they don't help. When i go to the settings/general/usage is can see that the time for Usage and Stand-by are the same, so my phone is fully on all the time this explains the draining. But in reallity i turn my phone to stand-by most of the time, i mean the screen is black and all???
The first and second time a had this problem, both a few months a part, i restored my phone and it was solved. This time i restored my phone but this did not help!! And restoring my phone every two months is not my preferd way of solving this problem.
Does anybody have an idea on how to solve this problem? can anybody help me?
best regards,
Merijn

Restoring is the answer. It sounds as if there is a rogue process constantly draining your battery.
The issue you face is that, if you restore your backup thereafter, you risk the problem coming straight back with your files.
Store your files individually and it is time to start fresh.

I recently purchased 3 CD's, some of the songs are cut off in the middle of the song. Itunes sent me a link several times to redownload the songs, but each time either the same songs or different songs would be cut short each time I redownloaded the CD's

I recently purchased 3 CD's, some of the songs are cut off in the middle of the songs. Several times ITunes sent me a link to redownload the CD's or certain songs and each time either the same songs or different songs on the CD's would be cut short. What could be causing this?

shameless bump

Every time I synch my iPad I am told there are purchases to transfer. These are the same books that are transferred every time.

Every time I synch my iPad I am told there are purchases to transfer. These are the same books that are transferred every time.

"Motion 5" is your friend.
Michael Wohl has a nice 15 video series (free) about Motion 5 at http://www.macprovideo.com/tutorial/motion5101-overview-and-workflow-guide (right side)
This is a "teaser" series to sell his tutorials but it is really good. Just saw it yesterday for the first time.
While all you want is just to place pins, realize that Motion has so much more. All kinds of effects and they can be really customized. Maybe put their street address, contact name, and phone number by the pin?
Motion 5: cheap at $49.99 (just got my download two days ago)
Motion 5: Support Community athttps://discussions.apple.com/community/professional_applications/motion_5
If you're using the map for, say, deliveries, and use an iPad, what you could do is have a general map of the area imported into Motion, create the pins and whatever, then save (share?) it to the iPad.
Disclaimer: I have virtually no relationship with anything connected with this tutorial product, developer, or anything.

How to config to Time Recording ID Number are the same Personnel Number?

Dear all,
My schedule is Time Recording ID Number are the same Personnel Number. So Please hepl me config to Time Recording ID Number are the same Personnel Number.
Thank for your help.
Huyen Nguyen

Hi,
The time recording ID is the link between your personnel number in SAP and the time data captured by a swipe card.
When card is swiped on the terminal..the machine notes the timings, clock types, door ID, Card ID, etc.
The system identifies the personnel in SAP on the basis of the ID number which will also be there on the swipe card.
There isn't any config to maintain the ID in IT0050. Just maintain this value in IT0050 as any number, personnel number say, and use the same value while configuring data transfer frm recording machine to SAP via RFC.
Hope this helps.
Regards,
Shreyasi.

When i sync my ipad and imac on ical the times are different yet the time zones are the same, any ideas why?

when i sync my ipad and imac on ical the times are different yet the time zones are the same, any ideas why?

Under the summary tab in iTunes make sure you have Automatically Back Up This computer. If you have iCloud selected it won't back up when syncing.

How can I have use the same div ID multiple times on the same page?

Okay so a problem I encounter a lot is that often times I want to use the same div ID several times on the same page. An example of this is when I'm creating table like designs.
Let's say for instance I create a div ID called 'product-container'. I want to use 'product-container' multiple times on the same page but if I do this it is improper XHTML and will throw errors in any XHTML validator (you are only allowed to use a div ID once on any XHTML page in order for it to be standards compliant).
Now the first option is that I could define 'product-container' in my CSS style sheet multiple times by doing something like this...
#product-container {
     width: 300px;
#product-container-2 {
     width: 300px;
#product-container-3 {
     width: 300px;
#product-container-4 {
     width: 300px;
What you will see there however is that it seems pointless to define the same ID numerous times over (just adding a number on the end) when each ID is the exact same thing and has the exact same attributes.
Now what I have noticed is that there are some sites out there who manage to have the same ID appear several times in the code but add a number to it just like above. The difference is that they only have one definition for 'product-cointainer' in their CSS document but in their actual XHTML code they have IDs for 'product-container' but with numbers on the end like 2,3,4,5, etc. It's almost as if JavaScript or some other code is automatically appending a number on the end of the ID so the validator won't consider the markup to be invalid, but yet it knows that it's using the same 'product-container' style that is contained in the CSS style sheet.
I hope I explained this correctly. I'm just hoping to find a way that I can put the same div ID on a page multiple times without having to define it over and over again in my CSS.
Any help is much appreciated!

Because it seems like by using a class you can't make this position as
well as you can by using an ID. Am I wrong?
An ID name can be used only one time per page. A class name can be used multiple times per page.
.product {
width: 300px;
text-align:left;
color: #FF0000
border: 2px solid #666;
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

How do i get my contacts to sync so they are the same on my computer, Iphone and Icloud?

from over the years I had a lot of information in my address book that was not relevent anymore, was incorrect or incomplete or a dupluicate. I went through all of them on my mac computer and updated all of the information. As soon as I pluged my iphone in to sync it I ended up with more duplicates, some contacts on my phone not on my computer and vise versa. I checked Icloud to make sure that one was ok but it is different from both my computer and my phone. Now I have 3 different versions of my contacts. How do I sync all three so they are the same so I can start cleaning it up again? Does i matter where I make the changes (phone, computer or cloud)? After I clean everthing up again how do I make sure that the most current and correct contacts are in all three places? Please help it making me a bit crazy at the moment.

That's your problem. You must have 10.7.5 or later installed to have iCloud. Upgrade your computer:
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Aperture is asking if all new photographs are the same person

Whenever I go to Faces and I'm presented with the Unknown Faces panel it asks if all the faces are the same person, every one.
I have tons of photos identified with many different people, but when it comes to unidentified pictures it only suggests one person.
I'm running Verson 3.2.3
I'm hoping someone knows the solution because it's very annoying

I am having this problem as well. I have created an Aperture 3 Library that contains photos from three sources:
12000 photos imported from an iPhoto '09 library that had about 275 faces identified; files are now referenced files
6000 photos imported from an Aperture 2 library; most files stored as referenced files
800 photos imported directly into the Aperture 3 library for the first time
Aperture 3 successfully imported all the faces that I had identified in iPhoto, but now it refuses to recognize any more faces. It makes no suggestions at all. When I go into Faces mode and select a person, all the suggestions are random faces that are nothing alike, but the suggestions NEVER include the person whose face it actually is. If I go into a second face, then it will make lots of random suggestions that DO include face 1, but again NONE of the suggestions are the selected face. It seems like the suggestion engine is actively EXCLUDING the face in question.
Problem continues after upgrading to Aperture 3.01.
Anyone else seeing this problem?

XML Publisher(XDODTEXE) in EBS taking more time with the same SQL in TOAD

HI
XML Publisher(XDODTEXE) in EBS taking more time with the same SQL in TOAD.
The sql has 5 union clauses.
It takes 20-30 minutes in TOAD compared to running through Concurrent Program in XML Publisher in EBS taking around 4-5 hours.
The Scalable Flag at report level is turned on with the JVM options set to -Xmx1024m -Xmx1024m in Concurrent Program definition.
Other configurations for Data Template like XSLT, Scalable, Optimization are turned on though didn't bounce the OPP Server for these to take effect as I am not sure whether it is needed.
Thanks in advance for your help.

But the question is that how come it is working in TOAD and takes only 15-20 minutes?
with initialization of session ?
what about sqlplus ?
Do I have to set up the the temp directory for the XML Publisher report to make it faster?
look at
R12: Troubleshooting Known XML Publisher and E-Business Suite (EBS) Integration Issues (Doc ID 1410160.1)
BI Publisher - Troubleshooting Oracle Business Intelligence (XML) Publisher For The Oracle E-Business Suite (Doc ID 364547.1)

I have two Apple accounts the one on my phone and computer are the same the one on my mini i pad is different I have credit on my mini i pad however, when I purchase an App or movie I am charged on my credit card and the $40:00 worth of I Tune cards is by

I have two Apple accounts the one on my I phone and computer are the same the one on my mini i pad is different I have credit on my mini i pad however, when I purchase an App or movie I am charged on my credit card and the $40:00 worth of I Tune cards is by passed I have tried to change the mini i pad account details to be the same as my computer and original apple i.d.account however, it will not allow me to do I have tried to reset the mini i pad but not all the way to factory otherwise I would loose all my data. I have visited a genuis bench at Fountain gate however, they tell me I need to ring apple support which I will do on the next working day.

You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
My Apple ID

MicrosoftDNS Container Conflict Resolution - Creation times are the same

Similar Messages

Maybe you are looking for