MicroUSB to become the standard charger plug

there has been many complaint regarding this issue
now this brings good news
http://www.gsmarena.com/microusb_to_become_the_standard_charger_plug_in_the_eu_next_year-news-2181.p...
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Hello ClauiQC,
The article linked below details how to change a standard user to an administrator. When authenticating, you will need to authenticate as the test user, as it is currently the only administrator on the system. After making your account administrator, you will be able to authenticate using your own account again.
OS X Mountain Lion: Give an account administrator privileges
http://support.apple.com/kb/PH10882
Cheers,
Allen

Similar Messages

  • I need the mother board plug for the battery charger and Bios Battery for an XT178 Laptop?

    HP xt178 Laptop (1P) F4685H SN: TW24604214
    I need to replace the motherboard plug that the Battery Charger plugs into as it is broken.
    The Bios Battery has failed and is NO: ML1220 with a number 28 in ink stamped on it.
    are these parts available from HP or can you provide me with common part numbers.
    Jack

    Hey JD,
    That's a reaalllllllllyyy old laptop.  As an HP employee I feel obligated to recommend picking up a new one at your local retailer.  
    If you are serious about finding parts then you may be out of luck.  HP stopped servicing that notebook in 2006.
    http://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=F4685H
    -wes
    I am an HP employee.

  • ZMP Charging/Plug I

    I have had my ZMP for about 2 weeks. It did not come with a DC charger so I must charge it from the USB. I have the lastest firmware installed. My problem is, the player never seems to fully charge. Actually I think that it charges and maybe fully, but i never get the charge icon to change from blinking lighting bolt to the fully charged plug. I think that i have tried everything and read over many post about this issue but I still can not the icon to change to the fully charged plug. Any help greaty apperacted.

    <SPAN>It has been charging for 2+ hours. I will elaborate; it seems like the player is charging and after a few hours it will stop pulsating. But I have never been able to see the total charge ?plug? icon. I have the player plugged into a USB on the back of the PC and not through a USB hub. I have had the Zen Micro before and did not have this issue, but I was also using the DC charger that came with it. Let me know what else I can answer for you. I appreciate your help.

  • Satellite P50t-A won't power on without AC Charger plugged in

    Hi there,
    I'm having an issue with the power on my P50t-A.
    History...
    For a while, I was getting less and less time out of the battery, until eventually one night it reached 0% with the AC charger plugged in, and windows telling me it "plugged-in" and "charging". It never increased from 0%, and would shut itself down.
    Given this history, I figured the battery had finally died.
    I ordered a new battery, opened up the laptop and replaced the old battery with the new one. I assumed at this point it was a no-brainer.
    I plugged the laptop back into the AC Charger, and without turning it on, let it charge up for the firs time. After several hours I noticed that the charge light remained red (as opposed to white - charged). I decided to turn the machine on to see where the charge was upto; 75%. Windows says "plugged-in" and "charging". I thought fine, I'll turn it off and let it go a bit longer.
    Came back a couple hours later to find the charge light still red. Turned on the machine to check the charge status - guess what - 75%.
    I shut the machine down, unplugged the AC charger, and hit the 'on' button... NOTHING.
    Opened up the machine, confirmed the battery connectors are plugged in - all seems OK.
    Did plenty of forum searching, some posts said upgrade the BIOS, so I did that - now has the latest (at the time, 1.9). No change.
    Tried various other updates with the Service Center application, nothing.
    Found something referring to uninstalling and re-installing a microsoft battery device driver (I didn't see what something in the OS would have to do with it, since the issue begins before boot, but I thought heck - I'm running out of things to try - I'll give it a go) - no change.
    Eventually landed on a post refering to this Toshiba post, talking about a battery reset button:
    http://support.toshiba.com/support/v...tentId=4004523
    Tried the battery reset button, with both the AC charger connected and disconnected. No luck.
    I'm now at a loss, and worried something is wrong with the motherboard.
    It's almost as if the laptop recognises the battery is there, but can't (or won't) send or draw power from it.
    Anyone seen this before, or know of a solution?
    Many thanks.

    I'm now at a loss, and worried something is wrong with the motherboard.
    I’m afraid you could be right…
    Usually the DC IN / Battery indicator will glow amber while the battery is being charged.
    In case the notebook is OFF the battery should be fully charged after about 3 hours… if the notebook is ON, the charging time would be a little bit longer… after about 6 hours the battery should be fully charged.
    In such case the Dc IN / Battery indicator should switch the status to “white”. This would indicate that the battery is fully charged…
    New batteries need to be calibrated to reach the best performance…
    Calibrating means that the battery should be discharged until its fully empty and then charged again till the DC IN/battery indicator would glow white.
    This process should be repeated two, three times until the battery recovers normal capacity.
    As mentioned, the DC IN / Battery indicator should glow amber to indicate that the battery pack is being charged. However if the LED does not glow, this indicates that power is not being supplied correctly.

  • IPhone 4 displays the fully charged icon at 96%?

    Last night I accidentally unplugged my iPhone charger and when I plugged it back in again my iPhone was showing the fully charged plug icon in the corner despite the fact it was only on about 93%.
    I disconnected it and connected it again and it still showed the same. When I restarted my phone, it went immediately from 93% to 96%.
    Tonight, I unplugged it at 96% to see what happened and when I plugged it back in again it showed the fully charged icon.
    Any ideas?

    I also depleted my battery completely, reset my phone, and let it fully charge without touching it.  That helped for me with the exact same problem.

  • Is it ok to leave a macbook charger plugged into the outlet at all times?

    Even while not charging?

    Your battery will last longer before needing replacement if you let the battery work once a week or so. Think of it as a muscle: if not used. it begins to die.
    Please see these Apple recommendations for battery maintenance:
    http://www.apple.com/batteries/notebooks.html
    especially the section, "Standard Maintenance" (my emphasis added):
    For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. Apple does not recommend leaving your portable plugged in all the time. An ideal use would be a commuter who uses her notebook on the train, then plugs it in at the office to charge. This keeps the battery juices flowing. If on the other hand, you use a desktop computer at work, and save a notebook for infrequent travel, Apple recommends charging and discharging its battery at least once per month. Need a reminder? Add an event to your desktop’s iCal.
    I take my MBP with me once a week to my volunteer job at a museum. When things are slow I use my computer on battery. That way I know I get the electrons moving at least once a week.
    There are many posts here that start with, "I don't understand why my battery went bad after only a year, I never use the battery"

  • Why do my ipod touch 4th,2nd become electrified when i plug them into a normal charger

    i was wondering why my ipod touch 2nd gen and 4th gen become electrified when i plug them into a normal charger and my ipod nano 5th and 6th gen do this as well

    Sure appears to be a defective charge or maybe just the cable.  Can you try another cable?.  Have you tried other chargers? Who made the charger?

  • Can the USB cord and charging plug be used interchangeably between iPad Air and Pad mini?

    I have a new iPad air and a new iPad mini. Both seem to have the same white USB cable, but the charging plug adapters are different sizes. Can they be used interchangeably with each other? In other words, can I use the Air adapter to charge the Mini without a problem and vice versa?

    The charger that comes with the iPad Air is 12 watts while the one that comes with the standard mini is 5 watts. As Kappy mentioned, the higher wattage charger (12 watt) can be used with both. If you try to use the 5 watt charger with the iPad Air, you'll likely get a Not Charging message. It may still charge but it will be very slow and it's not really recommended.
    The cables themselves are identical, no issue there.

  • Can I leave the zen vision:m plugged to the AC charger long time, one week for examp

    Hello, I would like to use the zen vision as a jukebox, playing music 24 hours per day for long times (weeks for example), and I would like to know if is possible to leave it plugged to the AC constantly, using the power of the AC charger instead of the batteries. I would like to know exactly what would it happen, I mean, if the player is 00% charged, would it discharge or would it use only the AC power, or would it use the power of the batteries and when they begin to decrease the AC will charge them?
    I know that usually it is not very advisable let the charger plugged due to the heat buildup, but I did it to a lot of devices before (cd players for example), and I never had a problem, I think is only a little bit excessi've way of caution.
    Thank you in advance

    I would not recommend it, It isn't documented but I don't think this is the intended use of the Zen Vision:M
    Number one; the LCD screen would constantly be on, and is bound to burn out. Maybe not after a week, but a considerably short time compared to standard usage.
    Number Two; how would the motor of the hard dri've hold up, spinning continuously. Its small, very fragile and not ment for heavy duty work is my assumption.
    Number Three; As far as the battery is concerned, I don't know what would happen. I know that after the charge is complete the charging supposed to stop. But what would the effects be after never using it's Rechargable batterys can still die, and loose there lifespan when not used for a long time, and old unused batteries may leak causing some damage and maybe even an injury,
    Number Four; This a "Portable" MP3 player, and is most likely logically designed, tested, and approved under specific specifications and usage. Not to mention you'd be waseting half the funtionality of the player. The Vision:M was made to be a specticle, Look, it has a touch pad and buttons that light up. It shows movies and pictures, it can record audio, play FM Radio, and sync up with Outlook. You wanna stick something like that on a shelf for weeks?
    You need more of a stationary Jukebox with Hard Dri've support and MP3 functionality. I don't know where you can get one or even if they exist. But my guess that they'd be really expensi've.But on the other hand I'd feel more comforatable experiementing with a Zen Xtra. Because its bigger, studier, the battery is removable, cheaper, and it functionality is more focused on what you want to do which is just to play music.
    Though even it was ment to be portable....
    <SPAN class=time_text>
    Message Edited by TimT on 06-2-2006 :05 AM

  • HELP NEEDED!! Recently upgraded my ipad air to the new update, charged it over night, now it will not come on? i plug in the charger but comes up the normal charging sign but still no life in it?

    HELP NEEDED!! Recently upgraded my ipad air to the new update, charged it over night, now it will not come on? i plug in the charger but comes up the normal charging sign but still no life in it? Seems as though theres either a problem it charging or starting up. Had the ipad for about a year and a month or 2.. what can i do to source the problem?

    Its just started up with the apple sign, then it goes to an off black coloured screen so its on but nothing showing just a dark screen but not jet black.. ahhh help!! thank you in advance

  • HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    - Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
    - Could you have damaged something when you took the iPod apart and replaced the Home button?

  • My ipod touch is not responding. It wont turn on. I have plugged it to the wall charger and have tried plugging it to my itunes, no signal is received or transmitted. what could be wrong?

    my ipod touch is not responding. It wont turn on. I have plugged it to the wall charger and its not receiving a signal. I have plugged to my itunes and its not sending a signal to my computer. what could be wrong?

    Did you check the USB cable or try another one?
    Did you check the docking port for any kind of debris or lint?
    Did you already try to reset your device by holding the sleep and home button until the Apple logo comes back again?

  • For my USA trip: do I just need a charger for the US to plug-in or do I need a converter as well to go to 110 Voltage?

    Hello everybody,
    I will go to California in 3 weeks. In order to charge my iphone4 I was wondering :
    do I just need the correct (american) plug or also the converter to change power from 220 to 120 ?
    Thank you for helping !
    Angela

    Just the American "plug".

  • HT3204 I updated my iphone 4 and now it won't turn on. All i get is the itunes logo and an image that looks like the charger plug.

    I UPDATED MY IPHONE 4 AND NOW IT WILL NOT TURN ON. ALL IGET IS THE ITUNES LOGO AND AN IMAGE THAT LOOKS LIKE THE CHARGER PLUG.

    plumbin wrote:
    .... ALL IGET IS THE ITUNES LOGO AND AN IMAGE THAT LOOKS LIKE THE CHARGER PLUG.
    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766
    Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
    iTunes free download from www.itunes.com/download

  • What's wrong with my MacBook, it only works when its plugged in to the wall charger

    my MacBook only works when its plugged in with the wall charger. What's wrong with it? it the problem fixable ?

    Marina -
    What Kappy said, or maybe your Battery charging cable is faulty, or something's happened to the input slot.
    I'd take it to Apple and have them troubleshoot it for you. 

Maybe you are looking for

  • Transfering from iPod to iTunes

    Hey Everyone. I understand why apple made this.. or at least I think they made this not possible. I have been stupid and sometimes will drag a song file directly to my ipod, and not the iTunes library... and now as I prepare to buy my iTouch I want t

  • Error in data transfer using CIF

    Hi all, I am just clueless. I am trying to transfer master data from ERP to EWM but it ain't happening. It is throwing out this error. System:    P6QCLNT800    User:  RFC_USER_1 12/11/2010 Function/Q/SAPAPO/CIF_LOC_INBOUND Text:        Internal error

  • Need info on adobe pdf generator

    Hi, We are evaluvating a tool to convert word document to pdf for our prestegious client. Below are requirements, Requirement 1: Source- MS Word document Target- PDF 1) Conversion of MS Word document to PDF through online. Here Word document content

  • Warp text in JTable

    hi, I have an application with Jtable. In the Jtable I want to display warp text. In order to do so I use HTML tags. My problem is that when i try to get the height of the cell in order to ditrminate the row height I get wrong height. I think that th

  • Weird Window size in Firefox 3 RC1?

    I've been a long user of Firefox for the longest time. Recently I went from Firefox 3 Beta 5 to Release Candidate 1. However, ever since I started using Firefox 3 RC1, when it opens it opens in a tiny window (about 50 x 50 pixels, the size of an icon