Mid 2007 Mac mini (2,1) with optibay, boot from raid 0?

I've just got an optibay, which I've installed, and now have two 7200rpm 500GB hard drives inside my 2007 mac mini. I've set it up as raid 0, and have cloned my original boot volume back to it, but when I start up the mini I get a stop symbol instead of the apple symbol.
According to this article, some macs don't support Raid booting, but my mini isn't listed amongst them:
http://support.apple.com/kb/TA24104?viewlocale=en_US
Anyone else doing something even vaguely similar to this?
Message was edited by: papalozarou

Which Tiger Install DVD do you have...?
1. I think that, that model originally came with 10.4.10 and so you will need either the original 10.4.10 install disc or a later retail (Leopard or Snow Leopard) upgrade DVD.
2. In addition, a new (HDD, Hybrid Drive or SSD) must first be Partitioned GUID Partition Table and Formatted Mac OS Extended (Journaled) before OS X can be installed.

Similar Messages

  • Mid-2007 Mac mini and HDMI issues

    I have a Mid-2007 Mac Mini with OS X 10.7.3, that, most of the time, will work fine with a DVI->HDMI cable and either of 2 HDMI ports on the TV. The Mini recognizes the display correctly (a Vizio E371VL). The display's native res. is 1080p at 60hz, and the Mini is set to that and looks great. I can switch to lower resolutions and even restart the mini and have the Vizio look and behave correctly.
    However, I have an Apple TV (current generation - black brick) hooked up to the other HDMI port on the Vizio. It also looks and acts great.
    The problem is when I switch between the inputs on the TV. If I go to the Apple TV (which will be working fine) and then back to the other HDMI input, the Mac mini shows black. The TV does not say "no signal" or indicate any problem. No amount of zapping PRAM, ressetting the SMC or basic restarting helps. In fact, the TV still registers a signal at 1080p. Using Apple Remote Desktop from another Mac (a 2006 Macbook Pro with DVI) shows the Mini is still functioning and still correctly displays the Vizio model and 1080p @ 60hz resolution.
    The kicker here is that I can physically disconnect the DVI/HDMI cable from the Mac mini and connect it to the Macbook Pro. The video from the Macbook will pop up immediately. I can switch between the Macbook and Apple TV all day long, switch resolutions, etc. No problem.
    Even more bizarre is that this has the effect of "resetting" the Mac mini. If I plug the DVI connector back into the Mini, its video will pop back up. It will work fine as above until the HDMI input is changed again.
    Vizio tech support acted as if they'd never heard of Apple, Inc. Useless.
    Super frustrating problem.

    Opperman,
    I went with my gut and got an LG 47LM4600 TV with VGA input in addition to HDMI (seems there are not many--if any--TVs sold with DVI inputs anymore). The 2007 Mac mini is plugged in using my old DVI cable with VGA adaptor.  I tested it using the DVI cable with HDMI adaptor, and there was no sound.
    I can confirm the same condition that you originally described when I try to switch to the Mac mini on the PC input. The screen is black except for a color bar that flashes on briefly every 2-3 seconds at the bottom of the screen. No amount of switching from one input to the other will make the display come back. The only way I've found to fix it is to unplug the cable from either the TV or the computer and plug it back in.
    The annoyance with this is ameliorated by the fact that we'll be using a new Apple TV to watch Netflix from now on, instead of using a Web browser on the mini. Will only have to worry about it when watching DVDs.
    Cheers.
    Message was edited by: Numenorean

  • Upgrading RAM on Mid 2007 Mac Mini

    My mother has a Mid 2007 Mac Mini, with 512MB RAM. In the past year or two, we've noticed its performance has been slowing. How much would upgrading to 1 or 2 GB of RAM help with the speed?

    A fair bit, but only if she installed many Dashboard widgets or RAM intensive applications.  Better that she leave the machine on overnight in screen saver, not energy saver mode, and make sure her hard disk isn't too full*:
    http://www.macmaps.com/diskfull.html
    And if then things are still slow, consider upgrading the RAM to the limit allowed by the machine according to specs*:
    http://www.macmaps.com/badram.html

  • Installing Lion on Mid 2007 mac mini

    I recently performed a wipe on my system's hard disk. I had a mid 2007 mac mini with OS 10.5.8 installed. After the wipe, the original installation disks do not work and i am wondering how to get my computer running again and eventually upgrade to snow leopard or lion.

    What exactly happens when you insert the original install DVD and try an install?
    You can order Snow Leopard DVD here:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Once you have Snow Leopard yo use the Mac App Store to update

  • How can I add 2 monitors to a Mid 2007 Mac Mini? Would a usb to dvi adaptor work?

    How can I add 2 monitors to a Mid 2007 Mac Mini? Would a usb to dvi adaptor work?

    Hi Craig,
    I do think that is your best bet/option...
    http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/

  • Mac Mini i7 (Mavericks) will not boot from the external drive

    Mac Mini i7 (Mavericks) will not boot from the external drive with Disk Warroir 4.4. or Drive Genius or Lion.
    Not even from the external Firewire hard drive with Mavericks

    Does the external HD have a GUID partition table?
    Is the external drive formatted Mac OS X Extended (journaled)?
    Is this a 2011 or late 2012 Mac?
    How was Mavericks installed on the external drive?
    Who is the builder of the drive mechanism in the external drive?
    Who is the builder of the external enclosure?
    What type of interface does the external drive have USB2, USB3, Firewire 400, Firewire 800, thunderbolt?
    Is the external enclosure directly connected to the mini?
    Have youtried a different interface cable?

  • HT1237 Where can I get firmware updates for a Mid 2007 Mac mini (Macmini2,1)?

    The model for some reason is taken off of the firmware update support page. I found an archive of the page from 2011 and there seems to have been an update. My current SMC Version is 1.19f2 and the update was 1.3f4 but the strange thing is that when I follow the link to download it forwards me to the late 2009 model page. Any help would be appreciated. I'd look across the internet but I'm not comfortable download firmware upgrades from a 3rd party site.
    Much thanks
    Edit: I found that the mid 2007, late 2006 and early 2006 use the same SMC firmware and realized that both the link from the archived page and the link for the late 2006 model on apple's page all linked to the early 2006 firmware update. I'm going to try it. If you want me to update with results reply, otherwise consider this dead...

    Good moves methinks, & it is strange how they list it, here's my 2007 iMac...
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4
    Here's my 2005 G5...
    Boot ROM Version: 5.2.7f1
    So it appears it probably is nineteen!

  • Mid-2010 Mac Mini -  black screen after installing boot camp drivers

    I successfully installed Windows XP Service Pack 2 on my new Mac Mini. The display worked without issue in XP at this point.
    After doing this, I proceeded to install the boot camp drivers. They installed and automatically rebooted the machine.
    After reboot, Windows XP no longer has a functioning display. The display is a black screen and eventually the monitor shuts off.
    Things I've tried:
    - Reset PRAM
    - Reset SMC
    - Tried both Mini DisplayPort and HDMI connections to connect to the HDMI port on the monitor
    - Booting into Safe Mode. Holding down F8 successfully brought up the Safe Mode options, but again the display was blank after choosing the Safe Mode option and attempting to load Windows.
    Message was edited by: mullingitover

    Update: Other stuff I've now tried--
    - Swapping out RAM modules. I've tried it with the stock 2GB sticks in place, also with a single 4GB stick. Same result.
    Other interesting/troubling problems:
    - Unable to boot into Safe Mode with command line. The text-only interface with safe mode options that is reached by pressing F8 during windows startup is displayed. However, no matter which option I choose, the result is a dead display.
    - Unable to boot with Windows XP install CD (?!). After choosing the CD at the boot selection screen, the display blanks and never wakes up.

  • 2007 Mac Mini Dropping WIFI constantly

    Hello,
    I have a mid-2007 Mac Mini with Snow Leopard installed, and it's located in a room about 20 feet away  from the access point. The connection to the room has never been that great for the Mini, but my iPhone 4S for example has no problem connecting to the WIFI. (The Mini seems to be really sensitive, but it does have good days as well where I get full bars). It's been on and off like this for over a year. 
    The problem only started a couple days ago, where it cannot connect to the home network at all. When I put the password in, it instantly says "connection timeout". Or it will load to Google.com, but if I try to browse to anything else, it stops, the connection drops. 
    It was working perfectly fine one afternoon and when I got back, it can't connect to it at all. I've never seen it struggle this much before, to simply connect to WIFI. I've had the computer for 5 years. Every computer, and phone connects perfectly fine to the network. I even tried moving the Mac Mini to a room where the router is just below, and it picked it up fine, so I don't think it's a hardware issue.
    What can I do to fix this?

    The App Store catalogs several free or low cost network analysis apps that might help identify low signal to noise, interfering networks, and available clear channels that might do wonders toward improved reliability. Depending on whether or not the router that is creating the network will support another device "extending" the network if all else fails an Airport Express  either in the room with your mini or perhaps in an intervening room might help.

  • SSD Drive schedules for 2007 Mac Mini @ GHz Core 2 Duo

    I have put a 240 Gig Crucial SSD in this computer and there was a very prominent bump in usability ie no pageouts .
    I have a 480 Gig SanDisk Extreme II and was wondering how sensible it would be to put it into the Mac Mini . SanDisk has a limited viability schedule posted . I thought SanDisk would have a bit better prepared catalog to view these particulars , and I thought wrong .
    Any expertise here would be appreciated to limit my fooling around with the Mac Mini , I had to go back and forth a bit to get stuff I overlooked .
    Thanks in advance ! FRP

       In observing the present compatability of the Mid 2007 Mac Mini Intel carrying a Serial ATA (1.5 Gb/s limit , divining just what inhibitions the speedier quality of those routine functions may be prohibited from employing a 6Gb/s SSD over a standard Disk Drive is less straightforward than an ordinary binary matter might , or might not be .
       Having made the observations subsequent to my request for suggestions supporting what an experienced hand  might venture I am very satisfied regarding the related efforts here .
       There may be some grist for the thought mill here though . There may be enough to offer some amusement in distinguishing between a computers harddrive , and external accessories USB 2 , Firewire , etc .
       The $14 USB 2 caddy I thought was going to carry the old disk drive to be the backup for the new 240 GB Crucial SSD . I did not pay attention to details concerning performance as I trusted the Crucial site's advice , and only worried about prying open the old Mini . The SSD drive worked so well that I went to Microcenter to purchase another drive for the caddy . That is where I discovered that the Crucial worked as a SSD hard drive , but was useless as an external device on the "old" Mac Mini . Returning the original Disk drive to the Mini made it apparent when the MacBook Pro was able to read the caddied Crucial SSD , and the old Mini wasn't .
       I now have the Crucial in the caddy , the SanDisk in the Mini . A pretty good extentsion of the Mac Mini's usefulness , the pageouts are unmissed . The Crucial will reside within the Mac Book Pro giving both computer and spousal college curriculum Window dependent papers a boost as well .
        I don't know why the SSD is working well in the Mini but fails as a  external drive , but that is fine . I would have liked to have put all the Mini's CPU's on SSD .

  • Should i upgrade 2007 mac mini from leopard to lion?

    I have a mid-2007 mac mini and would install the two 2G ram cards, but I'm not sure that the newer os would significantly improve things. Many posts suggest that it may be slower. Any thoughts?

    The poster said "I never installed Rosetta with my Snow Leopard upgrade, " thus he does not have any software to replace
    Eustace Mendis wrote:
    It will be more than $100 if you have to replace incompatible software following the OS upgrade. Power pc apps do not run in OS 10.7.

  • Audio issues on Mid-2010 Mac mini upgraded to Lion

    I'm using a Mid-2010 Mac mini that came with Snow Leopard but I recently upgraded it to Lion. Every app works pretty well except for audio playback. Whenever I play a game or play a movie, audio stutters every 8 to 10 seconds for like a sec and it comes back in. Video keeps playing fine. It's pretty annoying since I can't properly play games or watch movies anymore. The rest of my apps are working very well except for Boxer which seems to have taken a performance hit.
    Currently, the hardware hasn't been upgraded in any other way - meaning it still has the original 2 GB RAM memory. It's connected to my HDTV via HDMI. It didn't manifest this issue until the upgrade to Lion.
    I've tried closing every app but it doesn't seem to help. Hope you can help me out. Thanks!!

    You need a newer model Mac to use AirDrop between an iOS device (e.g. iPad) and a Mac
    System Requirements
    To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
    your iOS device needs to include a lightning connector
    your iOS device needs iOS 7 or later installed
    your Mac needs to be a 2012 or later model with OS X Yosemite installed
    Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
    To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
    MacBook Pro (Late 2008 or newer)*
    MacBook Air (Late 2010 or newer)
    MacBook (Late 2008 or newer)*
    iMac (Early 2009 or newer)
    Mac Mini (Mid 2010 or newer)
    Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
    Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

  • How to connect an external HD to a 2007 Mac Mini with FireWire

    I have a 2007 Mac Mini with a 1.83 GHz Intel Core Duo processor, 1 GB of RAM, and an 80 GB HD. I recently migrated to Snow Leopard (OS X 10.6.5) from Tiger (OS X 10.4.11). I purchased a 500 GB external HD from Seagate which I want to use to back up both my wife's notebook PC and my Apple. My Mac Mini has a Firewire 400 (6-pin) female connector on the back. The external HD can connect to a Mac via a Firewire 800 male 9-pin connector. How do I connect the male FW 800 9-pin to the female FW 400 6-pin port? This may sound obvious, but the solution is more challenging than I imagined. The 9- to 6-pin adaptors I've seen online combine a female 6-pin end with a male 9-pin end. I need the reverse of that (female 9-pin FW 800 to male 6-pin FW 400 adaptor)! I bought a 9- to 6-pin cable this week, but ended up with two male 9-pin plug ends, and no way to connect them. Is a solution available using FW, or should I bail and go with a USB 2.0 connection instead?

    Most external firewire drives have removable cables that plug into "female" ports on the hard drive. Is the firewire cabling on your external drive different from this? (What is the model number of the external drive?)
    If the cable is removeable, simply buy a 6-pin-to-9-pin firewire cable (male on both ends).
    monoprice.com is a good place to find these cheaply and in the length you need.

  • What external dvd burner is compatible with my 2007 mac mini running OS X 10.5.8?

    What external dvd burner is compatible with my 2007 mac mini running OS X 10.5.8?

    I have an LG GE24LU20 and works great with either my iMac or Mac Mini.
    LG GE24LU20 Optical Drives - 24x External Super-Multi DVD Rewriter - LG Electronics US
    Heck' I can even open and close the tray from my menu bar icon,
    plus it is way faster and less finicky than the superdrives.

  • Mid 2011 Mac MIni Freezing with OSX 10.8.2

    My Mid 2011 Mac Mini running OS X 10.8.2 has been Freezing (The baloon spins often) over random things.  Is there a scan I can do to check problems.  This is my first experience with a Mac and thought they weren't supposed to freeze.  I run a few programs at a time but I do have 8g of ram with 2.3 GHz Intel Core i5.

    The next time you have the problem, note the exact times when it starts and ends: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Scroll back in the log to the time you noted above. Post any messages timestamped during that interval – the text, please, not a screenshot.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Maybe you are looking for

  • Multiple iOS devices on same apple id

    I have a an iPad and two iPhones on the same apple ID. Unfortunately iMessage and face time show I am taking with myself. Is there a way to separate the communication to sub accounts or by device?  I would like to keep control of the apple ids as a c

  • How to use a Text View to show the current user in WDJ

    Hi Experts, I am using a Text View to show the current logged on user. Also i need to retrieve the date of creation of proposal and show it as output parameter. I am using the following code but it is not working properly. Please help me out regardin

  • Set up Lightroom for my workflow - Help Please!!

    Hi Guys, (PC/Win XP pro/Lightroom 1.3/PS CS3 running on large PC with plenty of everything!! - Printing on 7880 Epson through qimage) I have been working on Bridge/CS3 and want to set uplightroom for the following workflow (easy in Bridge but I cant

  • A/c adapter

    Will an HP 0957-2178 a/c adapterr work with my hp 7250 printer.  If not what is the model number a/c adapter I need.

  • 10.1.3 WS-Security with certificates bug?

    We've been using the 10.1.3 WS-Security wizard to secure some service clients generated from WSDL. Without security, all works fine. When we enable security and use x509 certificates to sign the messages we start hitting problems. There seems to be a