Mid 2007 Macbook Pro will not boot from windows 7 DVD

I'm trying to install Windows 7 64 bit on to my mid 2007 MBP. The DVD is valid, boots on a PC and I was able to load WIndows 7 into a VMWare fusion virtual machine on the very same system. I am convinced from those actions I have a good DVD and a good DVD drive.
What happens is the screen goes black and "1. 2. and Choose type of DVD boot:" appear. ( I may have the phrase slightly wrong) No matter what I type nothing happens. I've gone into the boot selecter and same thing happens if I select the DVD.

so you did not burn the DVD from ISO? that is what this usually is.
the error and yours being 2007 says you are trying 64-bit and your Mac does not support 64-bit versions it has 32-bit ROM (and likely cannot upgrade past Lion when 10.8 Mountain Lion comes out).
Windows 64 Bit Unsupported Macs
What you are seeing is an EFI boot menu "select CD 1 or 2" yes.
Select CD-ROM Boot Error Apple
CD-ROM Boot Type when installing
Install Windows 7 x64 Mac Select CD-ROM Boot Type

Similar Messages

Wiped macbook pro will not boot from install DVD

I recently purchased an older MacBook Pro that came with the OS system wiped but it did have the original Install DVDs. The computer will not boot from the DVD. I have booted holding down the C key and nothing happens. I have booted holding down the Option key and it shows the Install DVD and I select this and nothing happens.
How do I get it to open up the Utilities from the DVD to install the operating system?

It could be a problem with the optical drive, but also may be due to the DVD's being for a different model.
Exactly which MBP do you have, and what serial numbers are on the discs ?.

My Mid 2010 MacBook Pro will not boot

My Mid 2010 MacBook Pro will not boot regularly, in safe mode, in recovery mode or from original OS DVD. Is this the logic board?
I've tried resetting the SMC and pram numerous times and even tried switching out hdd's to try and do a clean install on a new hdd.
If I attempt to boot regularly or from recovery drive the grey apple logo appears for a period before the screen goes black and the power LED operates as though in 'sleep' mode. I'm unable to wake it from this state and the same applies to booting in safe mode.
When attempting to boot from the OS DVD that was originally packed with the computer it just freezes on the language select option, this occurs with the other hdd's I have attempted to use.
Any other suggestions to get it working? I fear the logic board has gone and that the repair won't be worth the money.
Thank you in advance.

Hi JRC8.8,
It sounds like you have been on the right track in trying to troubleshoot this issue. You may want to see if your MacBook Pro will boot directly to the Apple Hardware Test, as outlined in the following article:
Apple Support: Using Apple Hardware Test
http://support.apple.com/kb/ht1509
Regards,
- Brenden

MacBook Pro will not boot from Apple Logo Screen - No HD recognised

Hi all,
I encountered a problem booting my mid 2010 MacBook Pro yesterday. I currently run OSX Mavericks.
The computer has been great for the last 4 years and has never encountered any major issues. Yesterday I dropped it on carpet while sitting on the couch (it was a VERY small impact) and I continued to use it for a few hours. I did a safari update that night also. I then closed the lid which would have put it to sleep. My flatmate asked for a file later that night, I took his USB and stuck it in my computer, THEN opened the lid. The computer never booted up (It was stuck on the apple logo with the spinning thing underneath it). After doing this for a minute or so the computer would turn off. After multiple attempts the same thing happened.
I read many posts on this - I am assuming that the problem occured because I brought it out from sleep with a USB in the side. I have taken the following steps to attempt fixing the problem -
*safe boot - no luck
*reset PRAM - no luck
*recovery mode boot - getting disk errors.
In recovery mode boot I cannot reinstall a new OSX version because there is no internal HD disk mounted. It only gives me the option to install OSX to the Recovery HD, which is locked.
Using Time Machine backup wont work as there is also no Internal HD detected to load to.
In Disk Utility it no longer has 'Macintosh HD' - It is further labelled 'disk0s2'. I cannot verify, repair OR erase this disk.
Can someone PLEASE assist with what I might be able to do. I need to somehow mount/unmount/detect my internal HD. I am happy to detect it and format it as I have Time Machine backups on an external HD.
I am no mac genius although I do learn quickly. If I can get assistance It would be very appreciated. I have a feeling I can sort some issues out using Terminal although I need command assitance?!?
Apologies for the long post although I want to outline everything I have done to attempt to isolate the problem.
Thank you all in advance.

Does your flatmate have a Mac as well?
If so, you could always get a 8GB+ USB stick, download Mavericks using your Apple ID and use DiskMaker X to create a bootable installation disk on the USB stick. Then boot using the USB stick (hold down the option ey whilst booting to select it) and try to reformat your drive using Disk Utility and, if you're able, reinstall OS X on your machine and then restore from backup.
The only hitch may be that your hard drive is dead and that you need to install a new drive. You'll know once you boot from the USB stick, though, if you can format the drive or not.
Good luck,
Clinton

Macbook Pro will not boot from internal drive

I have a macbook pro model indentifier: macbookpro 7,1. The system would not boot what I have tried is first running apple diagnostics and all test fine, I tried booting from a snow leopard cd to re-install and it would not boot from the cd, however it does boot from the techtool pro 6 cd. I did run the test in techtool pro and all check out ok.
I removed the drive from the system and connected via usb to test and it boots fine from usb, put back internal and same result no boot. I did some research and I see that someone had a similar problem and it was the sata cable, but since the diagnostics test ok I am not sure that would be the problem.
Any Suggetions, this is driving me crazy
Thanks in advance
Bret

coffee would not HAVE to do anything except mechanically. It would not have any effect now since it has dried out, well short of corroding some components.
Check the points where the HDD casing "meets" the Macbook casing. How much pressure is there?
What about the pressure pins "pogo pins" are they all functioning?
What about pressure on the cables?
Please describe how it wont boot? What exactly does it do / happens

MacBook Pro does not boot from Windows/Linux CD

Hello,
I tried to install bootcamp, but experienced the following problem: I was able to use the bootcamp wizard to create the partition I need. Then the wizard ask to put in the Windows CD and forced the restart. While booting I only see a grey screen, nothing happened after a long time.
I tried different Windows CDs from XP SP2/3 to Windows Vista and Windows 7, also for a test a linux and dos boot CD. Always the same issue, only a grey screen. Booting from Leopard DVD works fine.
I already reset NVRAM, PRAM, SMC.
I can use and install all such CDs in Parallels in OSX. As Parallels supports booting Bootcamp partition in OSX, I installed there Windows 7, but with the limitation that OSX protects changing the MBR, this change could not be done, but Parallels was able to store such information itself. So I can use Bootcamp in Parallels.
Then I tried to set boot partition to BOOTCAMP in preferences, but then I get the error "no boot partition is found, please insert CD" when MacBook tries to boot. Of course, the MBR could not be written to the partition from Parallels.
I checked if all software, EFI, Superdrive firmware is up to date - and it is.
I am using MacBook Pro3.1, 3 years old with 4 GB of memory and SSD disk from OCZ.
Can somebody help with this issue?
MrBass

This isn't a direct answer to your issue but have you considered installing Wine so you can run the occasional windows app directly in OSX? It's a much more elegant solution IMHO. This avoids restarting all the time with Bootcamp and avoids crashing all the time (and the security risks) with Windows running.

MacBook Pro does not Boot from the DVD

If I want to boot from the DVD Insatll and "C" button, then you can hear noises as though it accesses the DVD but there is a gray background with the Apple logo and a spinning circle. I do so not in the Mac operating system but only in Windows.
Please help

"I do so not in the Mac operating system but only in Windows."

Macbook Pro will not boot from USB drive or Macintosh HD

The Mac in question:
Macbook Pro mid-2009
2.4GHz Core 2 Duo
4GBs RAM
OSX 10.8.4
Basically I did a fresh install of OSX 10.8.4 and Installed Windows 7 Home Premium 64bit via Bootcamp.
All software was up to date, I had the newest version of bootcamp for windows software, and everything was working fine.
I lent the computer to my dad
fast forward 3 months.
Windows boots fine and works for about 15 minutes then Blue Screens and restarts. Endless loop.
I did everything conveiveably possible for the Windows side before deciding to work on the Apple side.
Come to find out, my dad had not booted into the Apple side for almost 3 months. So on holding option and selecting the Macintosh HD icon, I got the apple logo with a spinning wheel under it. The wheel spun for about a minute then stuck. No response, so I held the power button down and restarted.
held option, and selected "Recovery 10.8.4" same deal minus the spinning wheel. stuck on the apple logo.
so i plugged in my bootable mountain lion usb (has been used countless times and works, its not the usb) and selected the usb. Same stuck apple logo.
I am at a loss as to what to do now. I dont care about any information on the drive, so i dont mind formatting and such.
But i am at a loss as to how to repair it if i cant access and bootables to do a disk repair or a clean install
Any suggestions would be helpful, thanks.
(btw, ive reset SMC and PRAM and all the usuals and ive internet searched out the whazoo, so yall are my last resort *grin*)
-Dusty

New info:
Selected Recovery disk in boot options menu and it loaded.
Disk recovery disk verification says there are errors with Macintosh HD but it cannot repair them.
Tried Reinstalling mountain lion from the Recovery screen and followed the instructions, signed into my Apple ID and it started installing mountain lion on Macintosh HD.
It immediately said 4 hours to complete and the blue progress bar started moving slowly.
it says it is "Downloading additional components, your computer will restart automatically"
about an hour later i checked it and the bar was full, but the estimated time was 1 hour 59 minutes and it has been almost 12 hours now.
Just trying to give a play by play so yall have something to work with.
making a Mountain Lion bootable USB as i type, will try that as soon as its done.
Dusty

Macbook Pro will not boot from any source after upgrade

Hi,
I have a late 2011 Macbook Pro - standard issue other than more memory as I recall. It has a 750MB hard drive with more than half still free. All the checks given below are done with the computer stand-alone with no hardware attached - other than the power cord and of course WiFi.
2 weeks ago I upgraded to Yosemite having taken all the right precautions before upgrade - thanks to Take Control. It worked fine and I was getting a good experience until last Wednesday when I put it to sleep by closing the lid. Later in the day I opened it up again but only got a grey screen. After leaving it several minutes to see if it cleared I shut down by holding the on button for several seconds then tried to re-boot. The computer starts and gets as far as the grey screen then shuts down again after several minutes. Sometimes it will continue to restart after shut down and keeps doing this until I again hold the on button in until it finally shuts down for good.
I have two bootable drives - one is a cloned backup of the previous version and all the data, the other is an 8GB thumb drive with a bootable version of the Yosemite installer. For the record I also have a Time Machine backup and a second full clone backup and recovery drive on a Synology NAS device - I just haven't figured out how to boot from this device as yet.
I can get to the boot up selection screen (hold option key) and select an external drive to boot from but it makes no difference - I still get the same grey screen. Same thing if I use Command +R to boot from the Mac HD recovery partition.
I have also tried to boot into safe boot mode (hold the shift key down). This seems to slow everything down but ultimately has the same result - a grey screen.The only difference I can see is that this grey screen does not shut down after a time. Seems to just continue until I shut it down manually.
I can hold Command +V to remove the grey screen and see the action being written to the screen while logging on (white text on a blue screen) - up to a point. After some time I just get the same grey screen and it shuts down after more time. I can also use Option +D (I'm told it should be just hold the 'D' key to do this but that has never worked for me and Option +D does) to get to the hardware check and I have run this both before upgrading and after having the problem. Before upgrading I got one error - 4ETC/1/40000002. I looked this up on the Internet and could find nothing specific to identify the problem and the general consensus seemed to be it was nothing major. After upgrading and running the hardware check again (after this problem occurred) it returned no errors.
I have reset the PRAM with the same result as before - all I get is the is the Apple logo and a progress bar that increases to around 50%, then both disappear and I get just a grey screen. After a time the computer shuts down and then restarts again and goes through the same process.
I've done pretty much everything I can think of and find in books and on the Internet. Hoping that someone out there will find this problem interesting and help me to resolve it.
Tony

Problem resolved. I took the machine into an authorized repair facility where, for around $30, I had it checked and the logic board replaced. Picked it up yesterday and seems to be working OK. No cost to replace the logic board even though the machine is over 3 years old. There seems to be some sort of dispute with Apple over a class action that has worked in my favour. Great. I'm happy.
Tony

Mid 2009 macbook pro 13" not booting from Western digital hard drive

So i've gone ahead and purchased a Western digital 2.5 inch scorpio black 750gb 7200rpm sata 16mb internal hard drive to replace my critical status 160gb standard drive in my macbook.
I have followed a guide using a usb 2.0 enclosure, with my new hard drive then carbon cloner which does allow me to clone a copy of the existing hard drive, but... when i boot up the macbook holding the option key i get the external hard drive which i can select but then i go into a os x utilities screen and does not boot straight to finder.
I get four options and one of them is disc utilities, so assuming this process in't as straightforward as i'm led to believe?
I have partitioned the new hard drive with guid for intel macs so pleae can anyone help me before i just give up and take it to my local apple store?
Thanks matt.

I have just solved this problem, with a fresh head this morning i realised that the external drive was empty and the cloning process didn't complete for some reason?
Anyhow i ran the clone again and booted externally which worked so then replaced my old hard drive with the new scorpio black and wow what a difference! I had beachballing before as my old drive was critical but now with the with the new speed 7200rpm drive its flying, very happy:-)

MacBook Pro will not boot into Windows 7.

I am sorry if this has been discussed before, but I could not find a correct answer. I recieved my 15" MacBook Pro last week, and I swapped out a few of the inside's for upgrades. I replaced the optical drive with a NewMode 2nd HDD Caddy, and a Hitachi 750 GB 7200RPM HDD. I also upgraded the RAM to 8GB. I bought the HDD so I could put Windows 7 on it. I went through the bootcamp process, partitioned 90 GB of my 2nd drive, and rebooted with my Windows 7 CD in my external CD drive. When it rebooted, it went to this black screen with a blinking cursor. I have tried many different ways to boot to the CD; like rEFIt and option key with no luck. It is not the disc because I have tried many bootable discs and none of them have worked.
Any help would be appreciated Thnx.

You cannot boot Windows from an external device. The Windows installer and Windows itself must be booted from an internal optical drive.
You can do some Google searching on how to create a bootable USB flash drive for installing Windows, but they all will require access to a Windows machine.
The new Boot Camp Assistant does provide an option for creating a bootable USB flash drive, but I don't know if it requires that the Windows installer DVD be in an internal optical drive.

Mid 2006 Macbook Pro won't boot (from HD or optical)

My mid 2006 Macbook Pro will not boot from the hard disk, or from the internal DVD. I am currently running the latest version of Lion (10.7).
I tried searching the forums and found a similar issue here:
https://discussions.apple.com/thread/1687899?start=0&tstart=0
But that was with a Mac Mini. And it doesn't look like the OP issue was ever resolved. I am having the exact same problem.
When attempting a normal boot from the internal HD of the Macbook Pro. It will make the happy chime of a successful POST. It will display the Apple logo. And that's as far as she gets.
No spinning wheel, no error image, no nothing. Eventually the system will start spinning up the fans as if it were under load (this was after about a half hour of just letting it sit there).
Doing a verbose boot, it never went past this:
com.apple.driver.Apple.IntelCPUPowerManagement
Photo of verbose boot:
Here's what I've tried.
1. Bought a brand new battery (as the current one was at death's door)
2. Zapped PRAM (Apple + Option + P + R)
3. Reset SMC according to these directions: http://support.apple.com/kb/HT3964?viewlocale=en_US
4. Attempted to boot to my original Tiger (10.4) install DVD, only to stop at this point during a verbose boot (Apple V):
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style
Photos:
5. I am able to put her in Target Disk Mode (hold T at boot). Then with a firewire cable I can connect it to my wife's Macbook 13" and I am able to run disk utility on it! Disk Utility did find and repair errors, however, it still refuses to boot.
6. I attempted to boot from my wife's Macbook 13" in Target Disk Mode. I put her machine in Target disk mode. Connected the firewire cable. Powered on my 15" MBP while holding the option key. Then I selected her drive as the boot disk... however it still refuses to boot even from a known working HD.
7. Finally, I swapped around RAM DIMMs with no change in behavior.
Help! I know she's an older gal (Laptop is 6 years old now) but I'm not exactly flush with cash and would rather not give up on her just yet.

My Mac started freezing (colored pinwheel) every time I tried using any application (i.e. Safari, iPhoto). After restarting for the 2nd time, it would no longer boot - makes start up sound but gets stuck on gray screen w/ apple icon. I tried resetting PRAM also - did nothing. I decided to reinstall OS; problem now is my HD is nowhere to be found! I am a tech dummy so this is way beyond my comprehension...I'm not seeing my HD from the Disk Utility either???
Side question...I backed up my files (mostly pics JPEG and videos) on DVD (had to compress to save). Why can't I open files on PC?

HT203254 MacBook pro will not boot up?

My 2007 MacBook pro will not boot up. Sometimes just stops booting before password screen, but other times after that. If I get to put in my password it goes on, but I either get a blank screen or partial jumbled screen. When using boot disc and run hardware test it gives a video controller error 4VDC/1/40000003. Would that make it hang up and not fully boot? I can understand it giving blank and jumbled screens.

Means you need a new logic board. Make an appointment at an Apple store to confirm.

Mid 2010 Macbook Pro will not stay off or asleep

Hi,
I have a mid 2010 MacBook Pro will not stay turned off when I tell it to shut down. It will shut down just fine, but a few seconds later it will boot up again. This also happens when I try to close the lid (or just put it to sleep), it will work fine, screen/Apple logo on the back will turn off and the status LED will slowly pulse. However a few seconds later, the LED stops pulsing and the Apple logo will illuminate. If I open the lid I will be greeted with the log in page with zero delay (i.e. its been displaying for a while).
This has become problematic because the computer always be running. If I put it in my laptop bag the computer will get hot as ****. The only way to get it to really turn off is to let the battery die or remove the battery. But this computer does not have the externally removable battery so that is not a trivial process.
The symptoms exist in both Mac OS (Mountain Lion and Maveriks) and Windows 8/8.1. This makes me believe its something in the hardware (or at least a setting in the hardware), not software (I know Apple doesn't care what Windows does, but it is exibiting identical behavior).
I have reset the NVRAM and the SMC with no luck. When I reset the SMC I didn't get a good indication that anything happened though, and was wondering if that is normal. Resetting the NVRAM results in another restart, while its hard to tell if you actually reset the SMC. I reset the SMC by turning the computer off, then holding the power button when it tries to restart (this usually gives me a few minutes where the computer will actually stay off), then pressing shift, control, option and power at the same time and releasing them at the same time. This is how the Apple documentation said to do it. They did not mention how long the must be held though so I presume that doesn't matter.
Anyone experience this/have any ideas?
Thanks,
Jim

Btmm error "can not coonnect to cloud server" Facetime and IMessage " Could not sign in, check your network connection and try again". Which I have again and again...

Macbook Pro will not boot beyond grey screen. System freezes.

My Macbook Pro will not boot-up or get beyond the grey screen (with spinning gear wheel.) I've tried all the recommended actions: resetting PRAM, disk repair, permissions repair, re-boot in safe mode etc but still the problem persists. When viewing the safe-boot in verbose mode, the system seems to hang at the stage when it's checking the Airport & Ethernet - the last line on the page reads: "AppleBCOM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?"
Any ideas how to fix this without doing an Archive & Install?
I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.) Will this actually be the case? Will I lose them.
Any help gratefully received. Many thanks.

jfromplymouth wrote: ...I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.) Will this actually be the case? Will I lose them...
Archive and Install just affects the System files, so any apps you have should still be available afterwards. The Installer on the disk that came with your Mac, when you bought it, will tell you this before you proceed. Of course, you can always back out of the Installer if you feel chicken.
Notwithstanding it is still necessary to backup everything. You need to check that Time Machine is set to also backup your Applications folder. It might be set not to do this.
It may not be necessary to worry about this if you have the original installer disc(s). I think any stuff downloaded from iTunes etc can be re-downloaded. However, it's probably quicker to get Time Machine to backup your apps if you can afford the HDD space. It's bound to be quicker than re-downloading the stuff plus any updates. And of course there's those Apps that you have but forgotten about. What about them?

Mid 2007 Macbook Pro will not boot from windows 7 DVD

Similar Messages

Maybe you are looking for