Mid 2009 macbook pro 13" not booting from Western digital hard drive

So i've gone ahead and purchased a Western digital 2.5 inch scorpio black 750gb 7200rpm sata 16mb internal hard drive to replace my critical status 160gb standard drive in my macbook.
I have followed a guide using a usb 2.0 enclosure, with my new hard drive then carbon cloner which does allow me to clone a copy of the existing hard drive, but... when i boot up the macbook holding the option key i get the external hard drive which i can select but then i go into a os x utilities screen and does not boot straight to finder.
I get four options and one of them is disc utilities, so assuming this process in't as straightforward as i'm led to believe?
I have partitioned the new hard drive with guid for intel macs so pleae can anyone help me before i just give up and take it to my local apple store?
Thanks matt.

I have just solved this problem, with a fresh head this morning i realised that the external drive was empty and the cloning process didn't complete for some reason?
Anyhow i ran the clone again and booted externally which worked so then replaced my old hard drive with the new scorpio black and wow what a difference! I had beachballing before as my old drive was critical but now with the with the new speed 7200rpm drive its flying, very happy:-)

Similar Messages

  • Mid 2007 Macbook Pro will not boot from windows 7 DVD

    I'm trying to install Windows 7 64 bit on to my mid 2007 MBP. The DVD is valid, boots on a PC and I was able to load WIndows 7 into a VMWare fusion virtual machine on the very same system. I am convinced from those actions I have a good DVD and a good DVD drive.
    What happens is the screen goes black and "1. 2. and Choose type of DVD boot:" appear. ( I may have the phrase slightly wrong) No matter what I type nothing happens. I've gone into the boot selecter and same thing happens if I select the DVD.

    so you did not burn the DVD from ISO? that is what this usually is.
    the error and yours being 2007 says you are trying 64-bit and your Mac does not support 64-bit versions it has 32-bit ROM (and likely cannot upgrade past Lion when 10.8 Mountain Lion comes out).
    Windows 64 Bit Unsupported Macs
    What you are seeing is an EFI boot menu "select CD 1 or 2" yes.
    Select CD-ROM Boot Error Apple
    CD-ROM Boot Type when installing
    Install Windows 7 x64 Mac Select CD-ROM Boot Type

  • Mid 2006 Macbook Pro won't boot (from HD or optical)

    My mid 2006 Macbook Pro will not boot from the hard disk, or from the internal DVD. I am currently running the latest version of Lion (10.7).
    I tried searching the forums and found a similar issue here:
    https://discussions.apple.com/thread/1687899?start=0&tstart=0
    But that was with a Mac Mini. And it doesn't look like the OP issue was ever resolved. I am having the exact same problem.
    When attempting a normal boot from the internal HD of the Macbook Pro. It will make the happy chime of a successful POST. It will display the Apple logo. And that's as far as she gets.
    No spinning wheel, no error image, no nothing. Eventually the system will start spinning up the fans as if it were under load (this was after about a half hour of just letting it sit there).
    Doing a verbose boot, it never went past this:
    com.apple.driver.Apple.IntelCPUPowerManagement
    Photo of verbose boot:
    Here's what I've tried.
    1. Bought a brand new battery (as the current one was at death's door)
    2. Zapped PRAM (Apple + Option + P + R)
    3. Reset SMC according to these directions: http://support.apple.com/kb/HT3964?viewlocale=en_US
    4. Attempted to boot to my original Tiger (10.4) install DVD, only to stop at this point during a verbose boot (Apple V):
    Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style
    Photos:
    5. I am able to put her in Target Disk Mode (hold T at boot). Then with a firewire cable I can connect it to my wife's Macbook 13" and I am able to run disk utility on it! Disk Utility did find and repair errors, however, it still refuses to boot.
    6. I attempted to boot from my wife's Macbook 13" in Target Disk Mode. I put her machine in Target disk mode. Connected the firewire cable. Powered on my 15" MBP while holding the option key. Then I selected her drive as the boot disk... however it still refuses to boot even from a known working HD.
    7. Finally, I swapped around RAM DIMMs with no change in behavior.
    Help! I know she's an older gal (Laptop is 6 years old now) but I'm not exactly flush with cash and would rather not give up on her just yet.

    My Mac started freezing (colored pinwheel) every time I tried using any application (i.e. Safari, iPhoto). After restarting for the 2nd time, it would no longer boot - makes start up sound but gets stuck on gray screen w/ apple icon.  I tried resetting PRAM also - did nothing. I decided to reinstall OS; problem now is my HD is nowhere to be found! I am a tech dummy so this is way beyond my comprehension...I'm not seeing my HD from the Disk Utility either??? 
    Side question...I backed up my files (mostly pics JPEG and videos) on DVD (had to compress to save). Why can't I open files on PC?

  • My Mid 2010 MacBook Pro will not boot

    My Mid 2010 MacBook Pro will not boot regularly, in safe mode, in recovery mode or from original OS DVD. Is this the logic board?
    I've tried resetting the SMC and pram numerous times and even tried switching out hdd's to try and do a clean install on a new hdd.
    If I attempt to boot regularly or from recovery drive the grey apple logo appears for a period before the screen goes black and the power LED operates as though in 'sleep' mode. I'm unable to wake it from this state and the same applies to booting in safe mode.
    When attempting to boot from the OS DVD that was originally packed with the computer it just freezes on the language select option, this occurs with the other hdd's I have attempted to use.
    Any other suggestions to get it working? I fear the logic board has gone and that the repair won't be worth the money.
    Thank you in advance.

    Hi JRC8.8,
    It sounds like you have been on the right track in trying to troubleshoot this issue. You may want to see if your MacBook Pro will boot directly to the Apple Hardware Test, as outlined in the following article:
    Apple Support: Using Apple Hardware Test
    http://support.apple.com/kb/ht1509
    Regards,
    - Brenden

  • Mid-2009 Macbook Pro will not turn on

    Hi Folks,
    so my mid-2009 15in Macbook Pro will not turn on. I updated the OS to Mavericks in December 2013. I'm from California, but I recently moved to the Guam/Marianas area where it is more humid and generally around 87 degrees F all day. For the past month my computer has worked fine, albeit I did notice the fan was running a little more than usual. I usually would just put it into sleep mode when I would finish using it (apparently a bad idea based off of reading other posts concerning humidity and, more importantly, heat). One day I finished using it, closed it and the next day went to open it; I could hear the fans start to work, but then it stopped. It hasn't turned on since. You press the power button and nothing happens. I tried all the troubleshooting stuff.
    So, my question is this: what do you think is the problem? Moreover, how much do you think it could cost to repair it? My experience with computers suggests to me that it's probably a dead motherboard. I'm wondering if it's worth trying to salvage this thing or if it would be prohibitively expensive. There are no Apple stores in the area to take it in to get advice unfortunately.
    Now, I just want to vent a little frustration. I have many apple products, and I've even switched my mother over to an apple computer, but now that I need some very basic support, apple doesn't provide a contact e-mail or a free chat? I think charging someone $19 for 'one time assistance' is ludicrous. I bet if I brought this into an apple store I could at least get some advice, and thus get some idea how I want to proceed with repairs or not. I suppose I'm also rather frustrated that my macbook, which I have been most happy with all these years, breaks because I go somewhere a little more humid and generally warmer? It would appear that the hardware failure is connected to the climate. This makes me skeptical about purchasing another mac if it can't handle a little humidity. (I have not spilled liquids on it, nor have used this computer while transitioning from an air-conditioned/humid location which could potentially cause condensation). I do not think I'm being unreasonable (yes I do think a $2500 computer should not fail after less than 5 years), but if you think I am unreasonable, please enlighten me.
    Thanks for any help. I really appreciate it.
    Ken

    Ken,
    the “Important Handling Information” in the little white manual that came in the box with your MacBook Pro states that its operating temperature range is from 50 °F to 95 °F (10 °C to 35 °C), and that its operating range of relative humidity is 5% to 90% (non-condensing). If your corner of the Pacific is outside of these ranges, the manual states that “Failure to follow these handling instructions could result in damage to your MacBook Pro”.
    I have no idea what problem your MacBook Pro has; since you’ve tried all of the troubleshooting stuff, you’ll need to somehow get your MacBook Pro to a qualified service facility to diagnose the problem. If the logic board does need to be replaced, it would probably cost hundreds of dollars for a replacement, and you might find that purchasing a replacement used MacBook Pro of the same model to be price-competitive with just replacing your MacBook Pro’s logic board.
    If you find Apple’s out-of-warranty policies unacceptable, then your only alternative to venting would be to purchase your next computer from a different company which has out-of-warranty policies more to your taste.

  • MacBook Pro will not boot from Apple Logo Screen - No HD recognised

    Hi all,
    I encountered a problem booting my mid 2010 MacBook Pro yesterday. I currently run OSX Mavericks.
    The computer has been great for the last 4 years and has never encountered any major issues. Yesterday I dropped it on carpet while sitting on the couch (it was a VERY small impact) and I continued to use it for a few hours. I did a safari update that night also. I then closed the lid which would have put it to sleep. My flatmate asked for a file later that night, I took his USB and stuck it in my computer, THEN opened the lid. The computer never booted up (It was stuck on the apple logo with the spinning thing underneath it). After doing this for a minute or so the computer would turn off. After multiple attempts the same thing happened.
    I read many posts on this - I am assuming that the problem occured because I brought it out from sleep with a USB in the side. I have taken the following steps to attempt fixing the problem -
    *safe boot - no luck
    *reset PRAM - no luck
    *recovery mode boot - getting disk errors.
    In recovery mode boot I cannot reinstall a new OSX version because there is no internal HD disk mounted. It only gives me the option to install OSX to the Recovery HD, which is locked.
    Using Time Machine backup wont work as there is also no Internal HD detected to load to.
    In Disk Utility it no longer has 'Macintosh HD' - It is further labelled 'disk0s2'. I cannot verify, repair OR erase this disk.
    Can someone PLEASE assist with what I might be able to do. I need to somehow mount/unmount/detect my internal HD. I am happy to detect it and format it as I have Time Machine backups on an external HD.
    I am no mac genius although I do learn quickly. If I can get assistance It would be very appreciated. I have a feeling I can sort some issues out using Terminal although I need command assitance?!?
    Apologies for the long post although I want to outline everything I have done to attempt to isolate the problem.
    Thank you all in advance.

    Does your flatmate have a Mac as well?
    If so, you could always get a 8GB+ USB stick, download Mavericks using your Apple ID and use DiskMaker X to create a bootable installation disk on the USB stick. Then boot using the USB stick (hold down the option ey whilst booting to select it) and try to reformat your drive using Disk Utility and, if you're able, reinstall OS X on your machine and then restore from backup.
    The only hitch may be that your hard drive is dead and that you need to install a new drive. You'll know once you boot from the USB stick, though, if you can format the drive or not.
    Good luck,
    Clinton

  • Wiped macbook pro will not boot from install DVD

    I recently purchased an older MacBook Pro that came with the OS system wiped but it did have the original Install DVDs.  The computer will not boot from the DVD.  I have booted holding down the C key and nothing happens.  I have booted holding down the Option key and it shows the Install DVD and I select this and nothing happens.
    How do I get it to open up the Utilities from the DVD to install the operating system?

    It could be a problem with the optical drive, but also may be due to the DVD's being for a different model.
    Exactly which MBP do you have, and what serial numbers are on the discs ?.

  • Macbook Pro will not boot from internal drive

    I have a macbook pro model indentifier: macbookpro 7,1. The system would not boot what I have tried is first running apple diagnostics and all test fine, I tried booting from a snow leopard cd to re-install and it would not boot from the cd, however it does boot from the techtool pro 6 cd. I did run the test in techtool pro and all check out ok.
    I removed the drive from the system and connected via usb to test and it boots fine from usb, put back internal and same result no boot. I did some research and I see that someone had a similar problem and it was the sata cable, but since the diagnostics test ok I am not sure that would be the problem.
    Any Suggetions, this is driving me crazy
    Thanks in advance
    Bret

    coffee would not HAVE to do anything except mechanically. It would not have any effect now since it has dried out, well short of corroding some components.
    Check the points where the HDD casing "meets" the Macbook casing. How much pressure is there?
    What about the pressure pins "pogo pins" are they all functioning?
    What about pressure on the cables?
    Please describe how it wont boot? What exactly does it do / happens

  • MacBook pro does not recognize my WD external hard drive anymore

    I use TIme Machine on my WD external hard drive. Everything was working great up until about a month ago. My MacBook Pro does not recognize my external hard drive anymore...I have done nothing differently than usual. I did search in previous discussions and tried rebooting both the hard drive and the computer.
    The USB port is fine as it does recognize another external hard drive and also pen drives....Please help! I haven't backed up in a month and need to figure out how to get this to work soon. Should I call WD?

    Does the WD drive show in Disk Utility?
    Many times, a USB port simply cannot provide the power a hard drive needs. It is not uncommon for any electric motor to draw more power as it ages. A drive that worked before can stop working when it gets older because age has made it tak more power than any USB port can supply. There are a couple of cheap things to try:
    1) A "Y" USB cable---two plugs go to the computer and one to hte drive, giving a power boost.
    1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    2) a POWERED USB hub. That takes the power delivery burden off the USB port so it can deal with data.
    WD bare drives are fine but their enclosures are not very Mac-friendly. One thing that has reported helping is to get rid of the proprietary formating that WD puts on their drives. If you don't have to share the drive with a Windows computer, use Disk Utility to erase and reformat the drive to Macintosh Extended Journaled.

  • My macbook pro will not recognize my WD external hard drive 1tb

    My macbook pro will not recognize my WD 1 tb external hard drive that I have as my time machine backup. I worked just fine for a long time now The only way I can see it is through Disk utility. And when I try to repair the disk it say it cant be repaired, and i need to back up files and reformat. All my backups are on the hard drive. How do I back up the back if I cant get it recognized? Uggghhhhh I have several years of info on the hard drive .. PLEASE HELP!!!

    Hi cterry66,
    Welcome to the Apple Support Communities!
    I understand you would like to reset the user account password on your computer but do not know the original password. If you set up your Apple ID with that user account, you can use that Apple ID to reset your OS X user password. Please use the information provided in the attached article to complete the process. 
    OS X: Apple ID can be used to reset your user account password - Apple Support
    Cheers,
    Joe

  • Macbook Pro will not boot from USB drive or Macintosh HD

    The Mac in question:
    Macbook Pro mid-2009
    2.4GHz Core 2 Duo
    4GBs RAM
    OSX 10.8.4
    Basically I did a fresh install of OSX 10.8.4 and Installed Windows 7 Home Premium 64bit via Bootcamp.
    All software was up to date, I had the newest version of bootcamp for windows software, and everything was working fine.
    I lent the computer to my dad
    fast forward 3 months.
    Windows boots fine and works for about 15 minutes then Blue Screens and restarts. Endless loop.
    I did everything conveiveably possible for the Windows side before deciding to work on the Apple side.
    Come to find out, my dad had not booted into the Apple side for almost 3 months. So on holding option and selecting the Macintosh HD icon, I got the apple logo with a spinning wheel under it. The wheel spun for about a minute then stuck. No response, so I held the power button down and restarted.
    held option, and selected "Recovery 10.8.4" same deal minus the spinning wheel. stuck on the apple logo.
    so i plugged in my bootable mountain lion usb (has been used countless times and works, its not the usb) and selected the usb. Same stuck apple logo.
    I am at a loss as to what to do now. I dont care about any information on the drive, so i dont mind formatting and such.
    But i am at a loss as to how to repair it if i cant access and bootables to do a disk repair or a clean install
    Any suggestions would be helpful, thanks.
    (btw, ive reset SMC and PRAM and all the usuals and ive internet searched out the whazoo, so yall are my last resort *grin*)
    -Dusty

    New info:
    Selected Recovery disk in boot options menu and it loaded.
    Disk recovery disk verification says there are errors with Macintosh HD but it cannot repair them.
    Tried Reinstalling mountain lion from the Recovery screen and followed the instructions, signed into my Apple ID and it started installing mountain lion on Macintosh HD.
    It immediately said 4 hours to complete and the blue progress bar started moving slowly.
    it says it is "Downloading additional components, your computer will restart automatically"
    about an hour later i checked it and the bar was full, but the estimated time was 1 hour 59 minutes and it has been almost 12 hours now.
    Just trying to give a play by play so yall have something to work with.
    making a Mountain Lion bootable USB as i type, will try that as soon as its done.
    Dusty

  • 2009 macbook pro does not boot, restarts half way through boot. Has hard drive crashed?

    My macbook pro 2009 froze and shut off. I restarted it and only boots half way then it restarts on its own. I have tried entering cmd R to verify disk and permissions. My disk in unmounted and the SMART status says not supported. Error was found but while trying to repair it said: Disk utility stopped repairing. Disk utility can't repair this disk. Back up as many of your files as possible , reformat disk, and restoer your backed up files. I have tried to restore from time machine and it wont let me do that either. Has my hard drive crashed?
    Also, About 2 months ago i installed new RAM so I now have 8GB instead of 2GB and everything was working well up to that point.

    I am having the exact same issue. I can only log into the system in safe mode. Holding down the Shift key when turning the machine on, until the log window appears.

  • Macbook Pro will not boot from any source after upgrade

    Hi,
    I have a late 2011 Macbook Pro - standard issue other than more memory as I recall. It has a 750MB hard drive with more than half still free. All the checks given below are done with the computer stand-alone with no hardware attached - other than the power cord and of course WiFi.
    2 weeks ago I upgraded to Yosemite having taken all the right precautions before upgrade - thanks to Take Control. It worked fine and I was getting a good experience until last Wednesday when I put it to sleep by closing the lid. Later in the day I opened it up again but only got a grey screen. After leaving it several minutes to see if it cleared I shut down by holding the on button for several seconds then tried to re-boot. The computer starts and gets as far as the grey screen then shuts down again after several minutes. Sometimes it will continue to restart after shut down and keeps doing this until I again hold the on  button in until it finally shuts down for good.
    I have two bootable drives - one is a cloned backup of the previous version and all the data, the other is an 8GB thumb drive with a bootable version of the Yosemite installer. For the record I also have a Time Machine backup and a second full clone backup and recovery drive on a Synology NAS device -  I just haven't figured out how to boot from this device as yet.
    I can get to the boot up selection screen (hold option key) and select an external drive to boot from but it makes no difference - I still get the same grey screen. Same thing if I use Command +R to boot from the Mac HD recovery partition.
    I have also tried to boot into safe boot mode (hold the shift key down). This seems to slow everything down but ultimately has the same result - a grey screen.The only difference I can see is that this grey screen does not shut down after a time. Seems to just continue until I shut it down manually.
    I can hold Command +V to remove the grey screen and see the action being written to the screen while logging on (white text on a blue screen) - up to a point.  After some time I just get the same grey screen and it shuts down after more time. I can also use Option +D (I'm told it should be just hold the 'D' key to do this but that has never worked for me and Option +D does) to get to the hardware check and I have run this both before upgrading and after having the problem. Before upgrading I got one error - 4ETC/1/40000002. I looked this up on the Internet and could find nothing specific to identify the problem and the general consensus seemed to be it was nothing major. After upgrading and running the hardware check again (after this problem occurred) it returned no errors.
    I have reset the PRAM with the same result as before - all I get is the is the Apple logo and a progress bar that increases to around 50%, then both disappear and I get just a grey screen. After a time the computer shuts down and then restarts again and goes through the same process.
    I've done pretty much everything I can think of and find in books and on the Internet. Hoping that someone out there will find this problem interesting and help me to resolve it.
    Tony

    Problem resolved. I took the machine into an authorized repair facility where, for around $30, I had it checked and the logic board replaced. Picked it up yesterday and seems to be working OK. No cost to replace the logic board even though the machine is over 3 years old. There seems  to be some sort of dispute with Apple over a class action that has worked in my favour. Great. I'm happy.
    Tony

  • Macbook Pro does not boot from install CD, boots from non-apple live CDs

    This story begins with my macbook becoming entirely unresponsive while just sitting around with the desktop in focus. My current problems begin with the third of such freezing events. It felt like the hard drive had stopped responding since everything looked fine and I could move my mouse, but as soon as I attempted to access anything that depended upon the file system (ie everything not already in memory) that thing I attempted to access would freeze up as well. The only thing I can do when these happen is to force a shutdown.
    The three times I have had these problems I would be greeted with the flashing folder-and-question-mark. So, for the third time now I threw in a live CD I have and ran DiskWarrior and DiskUtility and fsck and everything I could possibly need to recover the system. Each of these programs ran through their routines and reported that it had either successfully made repairs or the disk needed no repairs and was A-OK!. S.M.A.R.T. reports that the drive is perfectly fine as well.
    Now, though, whenever I try to start up my computer I'm greeted with the normal grey apple startup image, the folder with the question mark, and also the prohibited sign (grey circle with a slash through it). This is the first time that running the disk repair programs has failed. Expecting a crashed hard drive or something equally fun I threw in the live CD again and attempted to recover my data. The thing is, I was able to navigate the file system perfectly with terminal and didn't even need any data recovery tools. So, at least my data has been safely backed up.
    I've tried booting into single user mode, but it seems that DiskWarrior helped my computer in an assisted suicide of sorts as boot.efi is sitting in a DiskWarrior recovered folder and the mach kernel has been entirely misplaced. Immediately I restart, throw in the first Macbook Pro installation CD, and hold down C in an attempt to reinstall the system.
    Here is my current problem: Whenever I attempt to boot from any of the installation CDs that came with my laptop, the laptop will begin to boot from the CD and show a grey screen as it begins reading from the disk, but before the spinning gear or grey apple appears the laptop simply restarts and attempts to boot from the disk again.
    This boot-restart process loops infinitely with every Apple-provided installation CD I have tried. The laptop never progresses past a grey screen, instead restarting and happily chiming. However, I have been able to boot from a non-Apple Live CD that I own every time I have tried; moreover, the hard drive is perfectly accessible and shows no errors from any program I run. When I hold option upon startup it shows the drive and lets me boot into it (but then the problems I have described pop up). I have also tried resetting PRAM and NVRAM with no success.
    Does anyone have any suggestions for how to boot into the live CD? Or would I be better off making sure I have backed up all of my data and then wiping the drive for a fresh install?

    I am having the exact same issue. I can only log into the system in safe mode. Holding down the Shift key when turning the machine on, until the log window appears.

  • MacBook Pro does not boot from Windows/Linux CD

    Hello,
    I tried to install bootcamp, but experienced the following problem: I was able to use the bootcamp wizard to create the partition I need. Then the wizard ask to put in the Windows CD and forced the restart. While booting I only see a grey screen, nothing happened after a long time.
    I tried different Windows CDs from XP SP2/3 to Windows Vista and Windows 7, also for a test a linux and dos boot CD. Always the same issue, only a grey screen. Booting from Leopard DVD works fine.
    I already reset NVRAM, PRAM, SMC.
    I can use and install all such CDs in Parallels in OSX. As Parallels supports booting Bootcamp partition in OSX, I installed there Windows 7, but with the limitation that OSX protects changing the MBR, this change could not be done, but Parallels was able to store such information itself. So I can use Bootcamp in Parallels.
    Then I tried to set boot partition to BOOTCAMP in preferences, but then I get the error "no boot partition is found, please insert CD" when MacBook tries to boot. Of course, the MBR could not be written to the partition from Parallels.
    I checked if all software, EFI, Superdrive firmware is up to date - and it is.
    I am using MacBook Pro3.1, 3 years old with 4 GB of memory and SSD disk from OCZ.
    Can somebody help with this issue?
    MrBass

    This isn't a direct answer to your issue but have you considered installing Wine so you can run the occasional windows app directly in OSX? It's a much more elegant solution IMHO. This avoids restarting all the time with Bootcamp and avoids crashing all the time (and the security risks) with Windows running.

Maybe you are looking for