(Mid-2009 MacBook Pro) Black screen on windows 7 disk boot up

Just tried to boot up from a windows 7 install disk, but I just got a black screen. Nothing else happened. Tried using an xp and vista disk also, but they both produced the same results. I've installed windows plenty of times from this computer before, but for some reason this time it decided not to work.
Any suggestions?

The only other relevant Support document is this one: If your Mac won't turn on - Apple Support but if your Caps Lock LED illuminates when you press it then your Mac is not completely dead. Technically, it turns on, even though it appears to do nothing else. In that case Apple refers you to the following document: Troubleshooting: My computer has no video but I doubt it will help because you cannot even get your Mac to start.
You will need to obtain the System Install DVD as I wrote, so that you can start the Mac, load an operating system, and format the SSD so that OS X can be installed. You might need to remove the SSD and install a conventional hard disk drive instead, at least until you can get the Mac working to the point you can install an operating system.

Similar Messages

I am having problems rebooting my mid 2009 macbook pro (grey screen other issues), need help!

I am having problems rebooting, I have experienced the same problem as others with the grey screen but my case is a little different, It started with my mid 2009 macbook pro acting a little slower than normal, the screen would freeze, mouse wouldnt move and i'd be forced to "force reboot" this went on for a couple of days until i was tinkering with the wifi connection and it froze again. I had to reboot and this time i noticed that it took a long time to get to the login screen. i put in my password and it went into infinite load (i also tried the guest account and other accounts with same result). i tried rebooting again and the same thing would happen. after several reboots, the screen just stayed grey, sometimes with the apple logo and gear sometimes without it. Since its a 2009, (and for the most part, still works like a champ) i decided test the ram, i took one stick of ram out at a time to see if i could notice anything wrong with them. when i stuck just one in, the mac was still having the same problem rebooting. i pulled that ram and and stuck in the other and i noticed that this time the apple logo never appeard and a big crossed out circle appeared. figuring that the ram must be the problem, i ordered new ram and installed it. i noticed that when i rebooted for the first time with the new ram it was rather quick and took me straight to the login screen and i was able to log in with no problem. at this point i thought the problem was solved, but i noticed the macbook still acting funny. at first, none of my files appeared on my desktop or in the finder window. after about 20 minutes, everything magically popped up. i also noticed long pauses/freezes with the colored pin wheel spinnig. i closed the laptop and opened it again and the screen just stayed black. i tried rebooting again, and again i got the grey screen with no signs of being able to log in... i waited about 20 minutes and tried to reboot again and again i was able to log in, however the macbook is still acting slow and will freeze with no signs of unfreezing without a reboot.
my macbook is 5 years old and has plenty of miles on it, so i understand if the thing needs to be replaced alltogether but does anyone know what could be the issue? could the bad ram have corrupted the hard drive in anyway? would re-installing the OS fix it?? and if so, how would i do that if i downloaded mavericks from the app store? are there any other solutions to this problem?
all my files and what not are backed up on an external HD so theres nothing on it that i'd miss desperately if i had to whipe the hard drive but id really like to get her working again without any whiping of the HD. if anyone can help me out, it'd be greatly appreciated

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

Can't install a stable Windows 7 on my Snow Leopard mid-2009 Macbook Pro via Botcamp

I just erased the whole disk with Disk Utility and re-installed a fresh version of Snow Leopard on my mid-2009 MacBook Pro with my original install disk and updated all the software.
I then created a 400GB partition via Bootcamp Assistant for Windows and successfully installed Vista.
I then successfully installed Windows 7 (not an upgrade) over Vista (I only have the official upgrade disk) and installed Bootcamp in Windows with the original OS X DVD.
I then upgraded Bootcamp from version 3.0 to 3.1 to 3.2 to 3.3 and then to 4.0.
None of these versions have resulted in a stable version of Windows 7 because the screen randomly turns one color (usually blue or white) with no cursor or interaction possible and I have to shut the computer down by holding the power button.
I've tried the whole process with 32 bit and 64 bit versions with the same results. The funny thing (not so funny, really) is that WIndows becomes increasingly unstable the higher I go with Bootcamp. I've even tried running the Vista to Windows 7 upgrade utility but Windows 7 is totally unusable. Once at Bootcamp 4 the system can't even get past the windows boot process.
I'm pulling my hair out here because I can't think of anything else to try. I'm suspecting the problem is driver related.
Any help would be greatly appreciated.

I suggest you start over with the install of Windows. You can use an Upgrade version of Win 7 to do a Clean install.
Basically you have to Not put in the license key when asked and also uncheck the option to Auto Activate Windows when the system gets online, mThen once it is installed and you are at the desktop go to the System applet in Control panel and Select Activate Windows. Then put the license key in.
If for some reason that doesn't work then you do a second install of Windows7 over the top of the current install and that make the installer think you are Upgrading and the Activation will go through.
It is all covered over at the Windows 7 forum.
http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html
http://www.sevenforums.com/tutorials/31402-clean-install-upgrade-windows-7-versi on.html

Windows 8.1 64-bit driver for Coprocessor on Mid 2009 Macbook Pro 5,4

I have successfully installed Windows 8.1 Pro 64-bit onto my Mid 2009 Macbook Pro 5,4. The installer from BootCamp 5.0.533.5033 would not run, but I installed one-by-one the files under Apple and then ran the 64-bit nVidia installlers. I have everything present and accounted for except for the 'Coprocessor.'
I have looked through the forums and everything seems to indicated that if you install the nVidia drivers it will install the driver for this but it doesn't. Any thoughts/suggestions/solutions?

For anyone who will find this post in the future, the Device Manager indicates that the 'Device Instance Path' is
pci co-processor pci\ven_10de&dev_0aa3&subsys_cb7910de&rev_b1\3&21436425&0&1d
Searching for that online, it appears that this is the nVidia MCP79 Co processor System.
This driver did not install with version 306.37 that came with the BootCamp drivers. I downloaded the current version from nVidia of 334.89 and that didn't work either. I searched online and found a driver for an Alienware 17x that uses the same co processor and ran the installer which extracted the files for the nVidia chipset v. 15.57 for 64-bit Windows 7 and Vista to c:\dell\drivers\R273039 and pointed the Device Manager to this folder and it was able to successfully install the driver software for the Management Controller (drivers are listed under the SMU folder for the "PCI\VEN_10DE&DEV_0AA3" device).
NVIDIA nForce System Management Controller
I then proceeded to use Double Driver to backup the drivers in use by the system so that if I install Windows 8 on future systems I can use this rather than the round-about way of getting the driver installed on the system.

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped

Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers

Lion login screen problems on Mid 2009 MacBook Pro

After upgrading my wife's Mid 2009 MacBook Pro from Snow Leopard to Lion we are seeing weird behavior on the login screen after the computer wakes from sleep mode.
The screen is only partially drawn (usually the top left 1/4 of the screen), and the grey background is shown instead of her desktop background picture. When you move the mouse around on the screen, it repaints blocks on the screen where the pointer has been.
This only seems to happen when the machine sleeps for a long period of time, e.g., overnight. When it just sleeps for a little while we don't see the issue.
When searching the forums for anyone else with the problem, several folks said that there was an issue with the video drivers for the 9400M card and recommended switching to the 9600M GT, but her machine only has the 9400M in it.
All other aspects of the system work fine.
Anyone else seeing this? Any clues?

Surprised there hasn't been anyone else experiencing this issue.
I have seen this on 2 new MBP 2.3mhz i5's with the Intel HD 3000 384mb graphics, Lion 10.7.3 & 10.7.4.
Also with the latest Lion firmware for the late 2011 MBP's that addresses compatibility and stability issues.
Hopefully there is a fix soon because the painting on my locked screen to login is getting annoying

My mid-2009 MacBook Pro's hard drive is near death. I want to install a new SSD and work from scratch. Please help.

Recently, my mid-2009 MacBook Pro has been crashing when I close the screen ("it's having a problem recognizing when the screen is closed/open and deciding what to do, error overload etc."). It wasn't an SMC issue so I took it to an Apple Store, ran some tests, and decided my hard-drive is failing.
Not wanting to spend an insane amount of money on some "official apple hard-drive," I want to install a new 256GB SSD instead. Hoping to squeeze as much life out of this computer as possible (in January I upgraded from 4 GB RAM to 8 GB), I would like to try and start from scratch, i.e. back-up important folders, music, photos etc. and only take that to the new hard-drive. If someone could explain all the steps I need to take to safely complete this task (or point me in the direction of a guide) I'd appreciate it.
Potentially Important info:
     Model:                mid-2009 13'' MacBook Pro
     Processor:          2.53 GHz Intel Core 2 Duo
     Memory:             4 GB 1067 MHz DDR3
     Software:            OS X 10.8.4
Some additional questions I have...
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing. The batter was replaced in March, the RAM was upgraded to 8 GB in January. When the battery was swapped, the trackpad went           nuts so that's new too. Only other issues are a slightly loose audio jack and the left side of the screen being slightly wobbly (hinge is worn I'm told).

cwgonzalez1192
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing.
Well there is no "official Apple HD / SSD" in any regard, no worries there.
If as you say youre only using same for surfing and word processing, why the need for a SSD? You would not notice any speed diff. in use on either of those,....in boot times yes, but in word or surfing, not.
You can push it likely a few more years, for mere surfing and word processing,...many many years.   Up TO the point that any major fixes become unrealistic relative to getting a new(ER) machine.
Concerned with a boot clone? yes and no. Its an ideal immediate recovery, since you cannot boot from Time Machine, ....in case of HD crash, recovery takes seconds from boot, or 20 mins or so from removing old and installing a clone. All the prosumers and pros have at least one updated clone of their prime machines.
You can do a "fresh install" if you choose, however if your current drive is FINE, why not merely clone it and save yourself some headache?...., but that is your prerogative of course.    Ideally 2 drives, one to backup your data (you need that regardless of installing a new drive for sake of a backup/archive,...ideally 2 actually, not merely one).
You could clone internal to NEW SSD/HD , ...then offload unnecessary files to an external to free up space and clutter and run off the clone, and this would only take a couple hours......the clone itself takes approx. 40+ mins.
CLONE Apps :
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/

I have a mid 2009 MacBook Pro 5,3 Unibody that won't run anything past Leopard.

I have a mid 2009 MacBook Pro 5,3 Unibody that suffered a minor liquid spill. After waiting for it to dry out, we found that it powers up (but the display doesn't work unless connected to an external monitor) just fine. For several months it worked like a tank running Snow Leopard. I upgraded to Lion with no problems. Once the 10.7.1 update came out, it completely flipped out and wouldn't finish the install. I was forced to take it all the way back to Leopard and now it won't upgrade past Leopard. I replaced the hard drive completely and tried a fresh install of Lion using the thumb drive and that didn't work either. I got the set of errors you will find below. (Sorry, I don't know how to hide them like you can in some forums.) Any ideas or suggestions on why it won't install Lion would be great. I'm not so concerned about the display as wondering why it worked for 4 months and then another month on Lion and then suddenly flipped out on me. I'm not knowledgeable enough to decipher the message below.
Jun 26 10:16:11 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:16:14: --- last message repeated 5 times ---
Jun 26 10:16:14 christine-cowens-macbook-pro authexec[158]: executing /Volumes/Mac OS X Install DVD/Install Mac OS X.app/Contents/Resources/InstallAssistantTool_10_5
Jun 26 10:16:17 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:16:18: --- last message repeated 1 time ---
Jun 26 10:16:18 christine-cowens-macbook-pro [0x0-0xa00a].com.apple.systemuiserver[98]: Unexpected reply from backup server - ignored
Jun 26 10:16:18 christine-cowens-macbook-pro [0x0-0xb00b].com.apple.finder[99]: Unexpected reply from backup server - ignored
Jun 26 10:16:25 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:16:55: --- last message repeated 11 times ---
Jun 26 10:17:53 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:18:23: --- last message repeated 9 times ---
Jun 26 10:21:50 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:22:20: --- last message repeated 7 times ---
Jun 26 10:22:21 christine-cowens-macbook-pro com.apple.launchd[72] ([0x0-0x14014].com.apple.installassistant[150]): Stray process with PGID equal to this dead job: PID 158 PPID 1 InstallAssistant
Jun 26 10:22:22 christine-cowens-macbook-pro loginwindow[23]: DEAD_PROCESS: 0 console
Jun 26 10:22:22 christine-cowens-macbook-pro shutdown[170]: reboot by christinecowen:
Jun 26 10:22:22 christine-cowens-macbook-pro shutdown[170]: SHUTDOWN_TIME: 1340731342 279916
Jun 26 10:22:22 christine-cowens-macbook-pro mDNSResponder mDNSResponder-176.3 (Nov 3 2008 16:52:57)[22]: stopping
Jun 26 10:22:22 christine-cowens-macbook-pro com.apple.loginwindow[23]: Shutdown NOW!
Jun 26 10:22:22 christine-cowens-macbook-pro com.apple.loginwindow[23]: System shutdown time has arrived^G^G
Jun 26 10:31:05 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
Jun 26 10:31:05 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
Jun 26 10:31:07 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Jun 26 10:31:07 localhost com.apple.launchd[1] (com.apple.RemoteDesktop.PrivilegeProxy): Unknown key for boolean: EnableTransactions
Jun 26 10:31:07 localhost com.apple.launchd[1] (com.apple.usbmuxd): Unknown key for boolean: EnableTransactions
Jun 26 10:31:07 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Jun 26 10:31:07 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Jun 26 10:31:07 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
Jun 26 10:31:07 localhost kernel[0]: npvhash=4095
Jun 26 10:31:07 localhost kextd[10]: 417 cached, 0 uncached personalities to catalog
Jun 26 10:31:07 localhost kernel[0]: hi mem tramps at 0xffe00000
Jun 26 10:31:07 localhost kernel[0]: PAE enabled
Jun 26 10:31:07 localhost kernel[0]: 64 bit mode enabled
Jun 26 10:31:07 localhost kernel[0]: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
Jun 26 10:31:07 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 26 10:31:07 localhost kernel[0]: vm_page_bootstrap: 905993 free pages and 77047 wired pages
Jun 26 10:31:07 localhost kernel[0]: mig_table_max_displ = 79
Jun 26 10:31:07 localhost kernel[0]: 104 prelinked modules
Jun 26 10:31:07 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jun 26 10:31:07 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Jun 26 10:31:07 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Jun 26 10:31:07 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Jun 26 10:31:07 localhost kernel[0]: calling mpo_policy_init for mb
Jun 26 10:31:07 localhost kernel[0]: Seatbelt MACF policy initialized
Jun 26 10:31:07 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Jun 26 10:31:07 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jun 26 10:31:07 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jun 26 10:31:07 localhost kernel[0]: MAC Framework successfully initialized
Jun 26 10:31:07 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
Jun 26 10:31:07 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
Jun 26 10:31:07 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jun 26 10:31:07 localhost kernel[0]: mbinit: done
Jun 26 10:31:07 localhost kernel[0]: Security auditing service present
Jun 26 10:31:07 localhost kernel[0]: BSM auditing present
Jun 26 10:31:07 localhost kernel[0]: rooting via boot-uuid from /chosen: CFA77CDA-F33D-3F25-97CF-9E5EE113C739
Jun 26 10:31:07 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jun 26 10:31:07 localhost kernel[0]: wl0: Broadcom BCM432b 802.11 Wireless Controller
Jun 26 10:31:07 localhost kernel[0]: 5.10.91.21
Jun 26 10:31:07 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 0025bcfffee5710e; max speed s800.
Jun 26 10:31:07 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9500420AS Media/IOGUIDPartitionScheme/Untitled@3
Jun 26 10:31:07 localhost kernel[0]: BSD root: disk0s3, major 14, minor 3
Jun 26 10:31:07 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 2878464 to: 2969088 (joffset 0x4b7000)
Jun 26 10:31:07 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Jun 26 10:31:07 localhost kernel[0]: [HCIController][configurePM] power parent ready after 1 tries
Jun 26 10:31:07 localhost kernel[0]: Jettisoning kernel linker.
Jun 26 10:31:07 localhost kernel[0]: Resetting IOCatalogue.
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 2
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 4
Jun 26 10:31:07: --- last message repeated 4 times ---
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 5
Jun 26 10:31:07 localhost kernel[0]: NVDANV50HAL loaded and registered.
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: Previous Shutdown Cause: 3
Jun 26 10:31:07 localhost kernel[0]: AppleTyMCEDriver::probe(MacBookPro5,3)
Jun 26 10:31:07 localhost kernel[0]: AppleTyMCEDriver::probe fails
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: AGC: 2.8.15, HW version=1.8.8, flags:0, features:1
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 0
Jun 26 10:31:09 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Jun 26 10:31:11 localhost bootlog[36]: BOOT_TIME: 1340731864 0
Jun 26 10:31:11 localhost rpc.statd[18]: statd.notify - no notifications needed
Jun 26 10:31:11 localhost DirectoryService[32]: Launched version 5.7 (v514.25)
Jun 26 10:31:11 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[23]: Login Window Application Started -- Threaded auth
Jun 26 10:31:12 localhost fseventsd[27]: bumping event counter to: 0x25d156 (current 0x0) from log file '000000000025c40a'
Jun 26 10:31:13 localhost kernel[0]: NVEthernet: Ethernet address 00:25:bc:e5:71:0e
Jun 26 10:31:13 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:26:08:e3:43:79
Jun 26 10:31:13 localhost blued[45]: Apple Bluetooth daemon started.
Jun 26 10:31:14 localhost mDNSResponder mDNSResponder-176.3 (Nov 3 2008 16:52:57)[22]: starting
Jun 26 10:31:14 localhost com.apple.usbmuxd[15]: usbmuxd-268.5 on Apr 5 2012 at 15:33:48, running 32 bit
Jun 26 10:31:15 localhost kernel[0]: NVEthernet::setLinkStatus - Valid but not Active
Jun 26 10:31:15 localhost kernel[0]: NVEthernet::mediaChanged - Link is down
Jun 26 10:31:15 localhost kernel[0]: NVEthernet::setLinkStatus - Valid but not Active
Jun 26 10:31:15 localhost kernel[0]: AirPort: Link Down on en1
Jun 26 10:31:15 localhost kernel[0]: jnl: disk0s2: replay_journal: from: 9485824 to: 9519104 (joffset 0x9d9000)
Jun 26 10:31:15 localhost /usr/sbin/ocspd[68]: starting
Jun 26 10:31:15 christine-cowens-macbook-pro configd[34]: setting hostname to "christine-cowens-macbook-pro.local"
Jun 26 10:31:16 christine-cowens-macbook-pro kernel[0]: jnl: disk0s2: journal replay done.
Jun 26 10:31:17 christine-cowens-macbook-pro kernel[0]: en1: 802.11d country code set to 'CN'.
Jun 26 10:31:17 christine-cowens-macbook-pro kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 149 153 157 161 165 153 161 149 157
Jun 26 10:31:19 christine-cowens-macbook-pro org.ntp.ntpd[14]: Error : nodename nor servname provided, or not known
Jun 26 10:31:19 christine-cowens-macbook-pro ntpdate[72]: can't find host time.apple.com
Jun 26 10:31:19 christine-cowens-macbook-pro ntpdate[72]: no servers can be used, exiting
Jun 26 10:31:20 christine-cowens-macbook-pro kernel[0]: Auth result for: c8:3a:35:56:9b:80 MAC AUTH succeeded
Jun 26 10:31:20 christine-cowens-macbook-pro kernel[0]: AirPort: Link Up on en1
Jun 26 10:31:21 christine-cowens-macbook-pro kextd[10]: writing kernel link data to /var/run/mach.sym
Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: Login Window Started Security Agent
Jun 26 10:31:25 christine-cowens-macbook-pro authorizationhost[85]: MechanismInvoke 0x129e00 retainCount 2
Jun 26 10:31:25 christine-cowens-macbook-pro SecurityAgent[86]: MechanismInvoke 0x1015f0 retainCount 1
Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: Login Window - Returned from Security Agent
Jun 26 10:31:25 christine-cowens-macbook-pro SecurityAgent[86]: MechanismDestroy 0x1015f0 retainCount 1
Jun 26 10:31:25 christine-cowens-macbook-pro authorizationhost[85]: MechanismDestroy 0x129e00 retainCount 2
Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: USER_PROCESS: 23 console
Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[82]): Exited: Terminated
Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[76] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[76] (org.x.startx): Unknown key for boolean: EnableTransactions
Jun 26 10:31:26 christine-cowens-macbook-pro /System/Library/CoreServices/coreservicesd[43]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Christine Cowen's Public Folder) returned -14135

Might have a hardware issue that was caused by the minor liquid spill.
Take it to Apple to have them look at it. I think they do a free diagnostics. That way you can find out what's wrong with your MB.
Good luck....Hope you get it sorted out.

Mini Displayport to DVI Adapter Problem on Mid-2009 Macbook Pro

I have a new mid-2009 Macbook Pro hooked up to a 20" Samsung 2033sw LCD with a native 1600x900 resolution using a mini Displayport to DVI adapter that I bought off of EBay. No matter what I've tried I can't get anything to display on the external Samsung LCD higher than 1024x768. I tried switching between GPU's and that made no difference. Any ideas.?

Michael, thanks for the reply;
When you open System Preferences/Displays does a second preference panel open up OK on the Samsung ?
Yes, but I can't see it unless I select 'gather displays'. Then it appears on the MBP LCD, and showing the correct resolution - 1600x900.
Is there an Options Tab visible under which you can check 'Overscan' ?
None that I can find. Only display and color tabs.
Is the Refresh Rate set to 60.0 Hertz
Yes, that is what it shows in Refresh Rate.
I also pulled out an older LG LCD that is fairly generic, .e.g. it has DVI in at 1280x1024. Same problem on that LCD ... nothing higher than 1024x768, but this time at 1280x1024 I get major noise and screen distortion. The displayed image is jumping all over the place, but at least there is something displayed.

I have destroyed the motherboard of a Mid 2009 MacBook Pro. How do I find out the technical specifications so I can give accurate information to someone who buys it for parts?

I recently had an unfortunate incident with a glass of water and a mid 2009-MacBook Pro. 13 inch screen.
According to the techs at the genius bar, the screen, keyboard, chassis and hard drive (160g) were still all good - as were all components other than the Motherboard.
I just completed the complete erasure of the hard drive, but don't have the technical specifications at my disposal.
Does anyone know how I can get them - the guy at apple said he didn't think he could help?
Serial No. Is available.
Thanks-

http://www.everymac.com/

Only Apple Branded Hard Drives Work in My Mid-2009 MacBook Pro

My Mid-2009 MacBook Pro (actually, my wife's) experienced a hard-drive failure about a year ago. This was a 500GB 7200RPM drive that came BTO from Apple.
It's easy enough to replace HD's, so, I did it myself with a Seagate 7200RPM 500GB drive, the same model as the one from Apple, but I got this one from Seagate, not from Apple, so it didn't have the Apple logo (and firmware?) on it. The drive did not work. I was able to format the drive using Disk Utility, but when I tried to install Snow Leopard on it, it would fail. I placed the new drive in my other MBP (early 2008), and installed SL, no problems. Booted to it just fine.
I put it back in the 2009 MBP, and it would not boot - it would show the flashing folder with a question mark. I put the drive in a usb enclosure and the MBP booted from it just fine (well, a little slower because the usb speed, I presume).
I bought another Seagate and experienced the same problem. I bought a Hitachi and experienced the same problem. I took it to an authorized Apple repair facility who told me that the HD was bad (which was obviously false, since all 3 HD's I tried worked just fine in my other computer).
So, I took it into Apple and gave them the whole story and they ran overnight hardware diagnostics and were unable to find (or fix) a problem.
So, I played stupid and brought it back again, saying "uh, my hard drive broke, can you fix it?" hoping that they would try to replace the HD and fix the problem or at least diagnose it.
Well, they put an Apple branded HD back in, and it works just fine.
Seemingly, that would be problem solved, and life has been fine for the last year. But, now we bought an OptiBay to ditch the DVD drive and place a 750GB (non-apple) drive in the optical bay. To my surprise, the non-apple drive works, but, it is pretty slow (we put our iPhoto library on there, and it chokes very badly when you ask it to do anything, such as zoom on a picture, play a video, go to full screen, etc. It takes about 30 to 45 seconds of SBOD to perform those tasks.
I am wondering if there was any way we could have damaged the SATA connector or driver? Why would only Apple branded drives work in the main HD bay? I don't know if an Apple branded drive would preform better in the optical bay or not.

I recently saw a similar situation described in another forum and someone directed the OP to look for a jumper on the drive. I raised my eyebrows--that sounded like old PATA technology--but, sure enough, the OP found a jumper, changed it and everything worked. This apparently changed the timing on the drive to match Apple products. I'm leaving town and won't have much time to search myself, but try a forum search for "SATA jumper" and see if something rings a bell.

HT4241 What video settings will I need to change on my mid-2009 Macbook Pro?

I am trying to send Audio/Video to my mother's T.V. using a third party combo cable(item # 6331), from monoprice.com. We have a 'Mid-2009 Macbook Pro. I can get the Audio with no problems. I tried all of the different resolutions on the Macbook and the closese Video image I can fet is a vertical sliver in the upper left hand corner of the T.V.(52'' Sony Bravia Model # unknown, mounted on wall) Please help. Mothers Day is coming up an All My Childeren is coming back, but will be on Hulu. Thank You

The tech specs list the upgrades that were available from Apple when that model was being sold new. They don't necessarily reflect the aftermarket-upgradabaility. I don't believe there'd be any reason you couldn't put a hard drive/SSD of whatever capacity you want in that MBP (of course it needs to be the right physical size).
That being said, it's good practice to make sure you have a window to return it just in case.
Yeah what Bob said.
Message was edited by: Andy-J-D

Can I upgrade the HD on my mid 2009 macbook pro 13" to a SSD higher than 256gb?

I have a mid 2009 MacBook Pro 13". I use it every day for school since september of 2009. I have a HUGE iTunes library (around 150gb) and I use DAW software to create music. I'm looking to upgrade from my current 250GB 5400-rpm Serial ATA hard drive to a larger SSD. I want to do this for the speed of an SSD and I need more hard drive space. Is there anyway to upgrade my macbook to a SSD in the ballpark of 500GB-1TB?? On Apple's technical spesifications it says I cannot upgrade to an SDD with more than 256GB. Is this really true or is there any way around this?
Thanks in advance!

The tech specs list the upgrades that were available from Apple when that model was being sold new. They don't necessarily reflect the aftermarket-upgradabaility. I don't believe there'd be any reason you couldn't put a hard drive/SSD of whatever capacity you want in that MBP (of course it needs to be the right physical size).
That being said, it's good practice to make sure you have a window to return it just in case.
Yeah what Bob said.
Message was edited by: Andy-J-D

My Mid 2009 Macbook pro (Just purchased) will not turn on after hard drive change and ram upgrade

So i purchased a mid 2009 Macbook Pro from a guy with 4 gb of ram and 250gb hard drive. It worked perfectly fine when i booted it with his hard drive and ram installed.
I spilled beer in my old computer (late 2009 15" 500gb hard drive and 8gb ram) but took the hard drive to get tested and it worked fine. i later found out it was from a 2010.
Like an idiot i assumed the pro i just purchased would be able to handle the same upgrades that were in my old computer so i threw in the 500gb hard drive (2010) and the 8gb of ram.
The thing booted up fine, just a bit slow which i chalked up to my hard drive sitting unplugged for a long time.
After about 3 minutes it crashed on me. Confused i replaced the 4gb of original ram back into it. (the 8gb ram was pny i bought from ebay so i thought it could be that) It decided not to turn on or show any lights on the front except for the battery meter.
After this i replaced the original hard drive and still NO LUCK!! im really mad because i am in desperate need of the information on my original 500gb hard drive and im afraid i have destroyed 2 computers and about $1K worth of cash out the window.
HELP please enlighten me on what i have done and if the situation can be fixed.

UPDATE: Problem solved with the old hard drive in it, Now the less pressing issue:
Will the computer run my 500gb hard drive with all my information on it? I need to forward a resume and it is on that hard drive.

Upgrading RAM in Mid 2009 MacBook Pro.

I currently have the standard 4gig of RAM in my Mid 2009 MacBook Pro and would like to up upgrade to 8 or 12gig. Apple states max is 8gig but I have a friend who quadroupled the RAM (way beyond what apple state is the max) in his machine and hasn't had any problems. I remember some time ago with Windows Vista (or was it XP?)
2 questions...
1) RAM from Apple is very expensive, are cheaper alternatives just as good or worth the risk? If so, could someone point me in the direction of a cheaper alternative?
2) What is the max amount of RAM I can put in to my machine? I remember some time ago with Windows Vista (or was it XP?) that the OS could only actually utilise a certain amount of RAM so installing any more than this was a false economy. Could this also be the case with Mac OS X?

Go here, all your questions will be answerd. Good, reliable source. Complete instructions:
http://www.macsales.com/

(Mid-2009 MacBook Pro) Black screen on windows 7 disk boot up

Similar Messages

Maybe you are looking for