Mid 2010 imac as a monitor for a windows PC

Yes I know there is an article saying it;s do-able with a minidisplay port to minidisplay port cable and putting the imac in target display mode with cmd-F2
BUT my question is, my gfx board has a display port, and I know they make displayport to minidisplayport cables would this work?
I tried the dvi adapter to minidsiplay port on the recommendations of the apple store here in Montreal and as I suspected...no go...
Would displayport to minidisplay port cable work?
Would and hmdi to minidisplay port work?
I dont want to blow 150$ on a dvi to minidisplay converter...at that point you can get a decent lcd for that much...
Any help would be GREATLY appreciated.

Which size 2010 iMac do you have?
As per: > iMac (21.5 and 27-inch, Mid 2010) - Technical Specifications only the 27" model supports Mini DisplayPort input.
For more info, see > Using a 27-inch iMac (Late 2009 or Mid 2010) as an external display

Similar Messages

Use 21.5 inch mid 2010 imac as a display for 2013 macbook air?

I would like to use my 21.5 inch mid 2010 imac as a display for my 2013 macbook air. I tried using Screen Recycle, however I would prefer more of a monitor situation than a side-by-side extra screen situation. Ideally with my wireless keyboard and mouse. Does anyone have any advice, or am I asking too much from apple? Thanks very much.

Yes. With an Ethernet cable and a product such as ScreenRecycler.
(62511)

Can i use a hdmi to mini display port cable to use my iMac as external monitor for a windows laptop?

Does anyone know if a hdmi to mini display port cable can be used to link a windows laptop with an 27 inch iMac to use the iMac as an external monitor. Or are there other options to connect my DELL latitude 6430?

Is the 3.5mm-to-optical cable any better than using a standard 3.5mm? I don't know too much about this stuff. My thought process was that if the source of the connection is a 3.5mm jack, does it make a difference using a cable that starts as a 3.5 and converts to optical?
Chances are excellent that if your receiver is less than 20 years old it has an optical input, this is a digital signal which will sound MUCH MUCH better than using an analog 3.5MM to 3.5MM connection. I recommend using the cable suggested or one with the same connections but of a different length if your needs warrant it.

Mini DisplayPort to DVI-D Dual Cable/Adapter for mid-2010 iMac?

Hi . . .
Sorry to pester with a question that's been covered from various angles before, but I'm new to the Mac world. Am a musician in BC, Canada doing a project remotely with people in Ontario. Decided to ditch my PC-based recording rig and went with a 2010 iMac and Logic Pro X (hallelujah!) because the other people are using Logic Pro X. So . . . I'm just learning the ropes.
Anyway . . . I have a spare monitor I want to run in dual setup extended desktop, and I'm not 100% certain of the cable and/or adapter I'll need. I'm also not sure why the adapters are bigger and seem to contain more internal components, whereas the cables just look like a simple "Plug 1" connected to "Plug 2" cable in a variety of lengths (in the same way you'd have a XLR to 1/4" phono cable).
Here's the info on my system, and any help would be greatly appreciated (will a cable suffice or do I need an separate adapter, DVI type, etc).
My iMac (mid-2010 21" Core i3 with Firewire running Moutain Lion 10.8.5):
http://www.everymac.com/systems/apple/imac/specs/imac-core-i3-3.06-21-inch-alumi num-mid-2010-specs.html
My monitor I want use as an extended desktop (Acer 22" X223W LCD):
http://reviews.cnet.com/lcd-monitors/acer-x223w-lcd-monitor/4507-3174_7-32627876 .html
So, it appears I'll need a male Mini DisplayPort to a male DVI-D Dual adapter and/or cable. Do I need to specifically buy a DVI-D Dual cable? Will a simple cable function properly or do I also need an adapter? I'm pretty sure a DVI-I cable won't work because it would have extra pins that aren't present in the DVI-D.
Thanks again . . . the assistance is appreciated.
Suds . . .

You are overthinking this.
"DVI dual link support" is concerned about the resolution of the display, not the number of displays.   A dual-link adapter or cable basically has double the number of wires to carry extra data to support higher resolutions than a single-link cable. Of course, both the computer and the external display must also support the higher resolutions in order to take advantage of the capabilities of dual-link.
You want to use two displays ... your iMac's buit-in display + your Acer display as a second monitor (what you called "dual monitors"). You can do this, as I explained earlier.
Your Acer monitor's maxiumum resolution of 1680 x 1050 is not high enough to require a dual-link connection.
"In single-link mode, the maximum pixel clock frequency is 165 MHz that supports a maximum resolution of 2.75 megapixels (including blanking interval) at 60 Hz refresh. For practical purposes, this allows a maximum 16:9 screen resolution of 1920 × 1080 at 60 Hz (1915 × 1436 at a 4:3 ratio).
To support higher-resolution display devices, the DVI specification contains a provision for dual link. Dual-link DVI doubles the number of TMDS pairs, effectively doubling the video bandwidth. As a result, higher resolutions up to 2560 × 1600 are supported at 60 Hz [via dual-link DVI]."   (See Digital Visual Interface, Wikipedia)
You can connect almost any VGA, DVI or HDMI display to your iMac, using the appropriate cable and/or adapter. Of course, you always have to make sure that your cable has the correct gender plug on each end.   The Apple adapter I recommended has a female connector, so you will need a cable with a male DVI-D plug on one end. As for the other end of the cable, check the input on your Acer display to see what it has and select a cable that has an appropriate gender connector on the end that will plug into your Acer monitor.
In extended desktop mode, you can set separate (independent) resolutions for your iMac display and your external Acer display, taking advantage of the maximum resolution of each.   (For example, that's why the MacBookPro example you cited works, it's because that model MacBook Pro can support higher resolutions on an external display than it's built-in LCD panel can.)

My iMac (21.5-inch, Mid 2010) has rebooted twice now for no apparent reason, since the successful install of Yosemite.

My iMac (21.5-inch, Mid 2010) has rebooted twice now for no apparent reason, since the successful install of Yosemite.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Using my iMac as a monitor for Mac mini.

I'd like to use my mid 2010 27" iMac as a monitor for my Mac mini. Is this possible with thunderbolt?

You'll use the thunderbolt port on your mini and connect to the mini display port on the iMac. use a mini display to mini display cable.
Target Display Mode: Frequently Asked Questions (FAQ)

I just updated my RAM and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.

I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
Here is the crash report:
Interval Since Last Panic Report: 5426204 sec
Panics Since Last Report:          2
Anonymous UUID:                    2DD57DDB-BB42-5614-395A-CA6225BDAFD9
Wed Mar 20 11:36:53 2013
panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb0eb950 : 0xffffff801aa1d626
0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
0xffffff81eb0eba00 : 0xffffff801aa435d2
0xffffff81eb0ebae0 : 0xffffff801aa663f7
0xffffff81eb0ebb20 : 0xffffff801aa67398
0xffffff81eb0ebc70 : 0xffffff801aa6887c
0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
0xffffff81eb0ebf50 : 0xffffff801ade182a
0xffffff81eb0ebfb0 : 0xffffff801aaced33
BSD process name corresponding to current thread: launchd
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000001a800000
Kernel text base: 0xffffff801aa00000
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 1070542822
last loaded kext at 707348380: com.apple.driver.AppleIRController    320.15 (addr 0xffffff7f9c53e000, size 28672)
loaded kexts:
at.obdev.nke.LittleSnitch    3908
com.apple.driver.AppleIRController    320.15
com.apple.driver.AppleUSBCardReader    3.1.0
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.iokit.SCSITaskUserClient    3.5.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.2.2
com.apple.driver.AppleUSBHub    5.2.5
com.apple.driver.AppleFWOHCI    4.9.6
com.apple.driver.AirPort.Atheros40    600.70.23
com.apple.driver.AppleUSBEHCI    5.4.0
com.apple.driver.AppleAHCIPort    2.4.1
com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
com.apple.driver.AppleUSBUHCI    5.2.5
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleACPIButtons    1.6
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.6
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
com.apple.iokit.IOUSBMassStorageClass    3.5.0
com.apple.driver.AppleUSBMergeNub    5.2.5
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
com.apple.iokit.IOUSBUserClient    5.2.5
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IO80211Family    500.15
com.apple.iokit.IOAHCIFamily    2.2.1
com.apple.iokit.IOEthernetAVBController    1.0.2b1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOUSBFamily    5.4.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.8.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    344
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.6
com.apple.iokit.IOPCIFamily    2.7.2
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3

There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
http://eshop.macsales.com/shop/apple/memory/iMac
http://www.crucial.com/

I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydas

Ok... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

How do I use my mid 2010 iMac as display with mid 2011 macbook pro?

I have a mid 2010 iMac and I want to use it as a display for my mid 2011 macbook pro.
The iMac has a mini display port and the macbook has a thunderbolt port.
Does anyone know if this is possible and what I need to make it possible?
Cheers!
-Sean

If the iMac is a 21-inch model, you need to use a product such as ScreenRecycler over a network.
If the iMac is a 27-inch model, click here and follow the instructions.
(121706)

Mid 2010 iMac Problems

I have a 21.5" Mid 2010 iMac with 16 GB RAM, running 10.8.5.
Problem #1
It's recently started doing some odd behavior when waking up from sleep. I have the screen saver set to come on after 5 minutes of inactivity and then the display and computer both sleep at 15 minutes.
When I try to wake the computer up by moving the mouse, it takes anywhere between 5-10 seconds for the password prompt to pop up and then it's another 2-5 seconds before it will let me type in the box. It also seems that when the computer sleeps, the wifi is disconnecting, because the computer won't have received any new email and all my mailboxes have the little exclamation symbol next to them.
After about 5 seconds or so once the computer fully wakes up, it reconnects and pulls all my new mail.
Problem #2
This usually happens when I just browsing facebook or youtube or something like that, but when I switch over to another application and come back to Safari, I will get the beach ball for a few seconds and then the computer will freeze. The mouse cursor turns into the little "I" symbol like when you go to type or highlight text. The only thing I can do at this point is a restart.
Problem #3
I have spaces set up with Safari, Mail, iCal, and iTunes in spaces 1, 2, 3, and 4. Most of the time I'm in Safari, but if I move to another space either with the mouse or the keyboard shortcut, to check for new mail, for instance, and go immediately back to Safari, it will on it's own jump back to the space I just left. It happens with any space no matter what. I use the option + arrow keys to go between spaces a lot.
Does anyone have any idea why this happens? Thanks for your help.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

My mid 2010 iMac is running very slow.

I have done all the usual things such as checking the disk is clean, closing unnecessary programmes etc. I would rather not replace what seems to be a good machine. Any ideas? Below is an etrecheck report on the machine:
Problem description:
I have 21.5 inch mid 2010 iMac running Yosemite. Its very slow, programmes keep crashing etc. Could you recommend any fixes rather than me having to buy a new one? The HD is less than half full.
EtreCheck version: 2.1.5 (108)
Report generated 1 January 2015 12:26:08 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2010) (Verified)
iMac - model: iMac11,2
1 3.2 GHz Intel Core i3 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
empty empty empty empty
BANK 1/DIMM0
empty empty empty empty
BANK 0/DIMM1
2 GB DDR3 1333 MHz ok
BANK 1/DIMM1
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 5670 - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 20:6:21
Disk Information: ℹ️
WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 999.01 GB (661.46 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 999.35 GB Online
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
TOSHIBA External USB 3.0 1 TB
EFI (disk2s1) <not mounted> : 210 MB
TOSHIBA EXT (disk2s2) /Volumes/TOSHIBA EXT : 999.86 GB (581.54 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Support]
/Library/Application Support/Hotspot Shield
[not loaded] com.anchorfree.tun (1.0.1) [Support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.2) [Support]
[loaded] jp.co.toshiba.driver.ToExtCmd (1.0.2) [Support]
Startup Items: ℹ️
AGMacFSWatcher: Path: /Library/StartupItems/AGMacFSWatcher
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] jp.co.Toshiba.autorun.plist [Support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.avast.userinit.plist [Support]
[running] com.delicioussafari.DeliciousSafariAgent.plist [Support]
[running] com.epson.epw.agent.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.anchorfree.ajaxserver.plist [Support]
[loaded] com.avast.init.plist [Support]
[loaded] com.avast.uninstall.plist [Support]
[failed] com.avast.update.plist [Support]
[running] com.backblaze.bzserv.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.avast.home.userinit.plist [Support]
[running] com.backblaze.bzbmenu.plist [Support]
[loaded] com.facebook.videochat.[redacted].plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
[running] com.spotify.webhelper.plist [Support]
User Login Items: ℹ️
Backup & Storage UNKNOWNHidden (missing value)
Dropbox Application (/Applications/Dropbox.app)
Backup & Storage UNKNOWNHidden (missing value)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.1 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.3.8.1 [Support]
AdobePDFViewerNPAPI: Version: 10.1.13 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
AdobePDFViewer: Version: 10.1.13 [Support]
CouponPrinter-FireFox_v2: Version: 1.1.10 - SDK 10.6 [Support]
EPPEX Plugin: Version: 10.0 [Support]
JavaAppletPlugin: Version: Java 8 Update 25 Check version
Safari Extensions: ℹ️
wrc [Installed]
iTube Studio [Installed]
3rd Party Preference Panes: ℹ️
Backblaze Backup [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Java [Support]
MacFUSE [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.01 GB Disk used: 337.55 GB
Destinations:
TOSHIBA EXT [Local]
Total size: 999.86 GB
Total number of backups: 14
Oldest backup: 2014-12-16 03:10:34 +0000
Last backup: 2015-01-01 12:10:03 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 337.55 GB X 3)
Top Processes by CPU: ℹ️
      2% WindowServer
      1% mds_stores
      0% bztransmit
      0% bzfilelist
      0% AppleSpell
Top Processes by Memory: ℹ️
159 MB com.apple.WebKit.WebContent
120 MB Safari
47 MB com.avast.daemon
47 MB bztransmit
47 MB System Events
Virtual Memory Information: ℹ️
292 MB Free RAM
1.20 GB Active RAM
813 MB Inactive RAM
735 MB Wired RAM
39.95 GB Page-ins
838 MB Page-outs
Diagnostics Information: ℹ️
Jan 1, 2015, 12:19:02 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-01-121902_[redacted].hang
Jan 1, 2015, 12:08:48 PM /Library/Logs/DiagnosticReports/AdobeReader_2015-01-01-120848_[redacted].hang
Jan 1, 2015, 12:08:47 PM /Library/Logs/DiagnosticReports/Safari_2015-01-01-120847_[redacted].hang
Dec 31, 2014, 04:20:24 PM Self test - passed
Dec 31, 2014, 03:43:36 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2014-12-31-154336_[redac ted].crash
Dec 31, 2014, 03:43:27 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2014-12-31-154327_[redac ted].crash
Dec 31, 2014, 03:43:22 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2014-12-31-154322_[redac ted].crash
Dec 31, 2014, 01:15:04 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2014-12-31-131504_[redac ted].crash
Dec 31, 2014, 01:15:02 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2014-12-31-131502_[redac ted].crash
Dec 31, 2014, 01:14:00 PM /Library/Logs/DiagnosticReports/WindowServer_2014-12-31-131400_[redacted].crash

Hi Lex
Its bizarre to still see cleanmymac on report below. It wasn't listed in applications, and I just found a couple of files that I deleted. Anyway, here is the report:
EtreCheck version: 2.1.5 (108)
Report generated 3 January 2015 12:18:56 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2010) (Verified)
iMac - model: iMac11,2
1 3.2 GHz Intel Core i3 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
empty empty empty empty
BANK 1/DIMM0
empty empty empty empty
BANK 0/DIMM1
2 GB DDR3 1333 MHz ok
BANK 1/DIMM1
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 5670 - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: one day 21:51:10
Disk Information: ℹ️
WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 999.01 GB (664.62 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 999.35 GB Online
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
TOSHIBA External USB 3.0 1 TB
EFI (disk2s1) <not mounted> : 210 MB
TOSHIBA EXT (disk2s2) /Volumes/TOSHIBA EXT : 999.86 GB (603.88 GB free)
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Hotspot Shield
[not loaded] com.anchorfree.tun (1.0.1) [Support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.2) [Support]
[loaded] jp.co.toshiba.driver.ToExtCmd (1.0.2) [Support]
Startup Items: ℹ️
AGMacFSWatcher: Path: /Library/StartupItems/AGMacFSWatcher
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] jp.co.Toshiba.autorun.plist [Support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.delicioussafari.DeliciousSafariAgent.plist [Support]
[running] com.epson.epw.agent.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.anchorfree.ajaxserver.plist [Support]
[running] com.backblaze.bzserv.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[running] com.backblaze.bzbmenu.plist [Support]
[loaded] com.facebook.videochat.[redacted].plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
[running] com.spotify.webhelper.plist [Support]
User Login Items: ℹ️
Backup & Storage UNKNOWNHidden (missing value)
Dropbox Application (/Applications/Dropbox.app)
Backup & Storage UNKNOWNHidden (missing value)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.1 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.3.8.1 [Support]
AdobePDFViewerNPAPI: Version: 10.1.13 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
AdobePDFViewer: Version: 10.1.13 [Support]
CouponPrinter-FireFox_v2: Version: 1.1.10 - SDK 10.6 [Support]
EPPEX Plugin: Version: 10.0 [Support]
JavaAppletPlugin: Version: Java 8 Update 25 Check version
Safari Extensions: ℹ️
wrc [Installed]
iTube Studio [Installed]
3rd Party Preference Panes: ℹ️
Backblaze Backup [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Java [Support]
MacFUSE [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.01 GB Disk used: 334.39 GB
Destinations:
TOSHIBA EXT [Local]
Total size: 999.86 GB
Total number of backups: 17
Oldest backup: 2014-12-16 03:10:34 +0000
Last backup: 2015-01-03 11:23:40 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 334.39 GB X 3)
Top Processes by CPU: ℹ️
      8% backupd
      3% WindowServer
      0% mds
      0% fseventsd
      0% bzserv
Top Processes by Memory: ℹ️
228 MB Safari
168 MB Mail
101 MB com.apple.WebKit.WebContent
69 MB Finder
69 MB WindowServer
Virtual Memory Information: ℹ️
87 MB Free RAM
1.18 GB Active RAM
1.11 GB Inactive RAM
737 MB Wired RAM
54.29 GB Page-ins
41 MB Page-outs
Diagnostics Information: ℹ️
Jan 2, 2015, 06:28:06 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-01-02-182806_[ redacted].cpu_resource.diag [Details]
Jan 1, 2015, 02:28:20 PM Self test - passed
Jan 1, 2015, 01:31:20 PM /Library/Logs/DiagnosticReports/iTunes_2015-01-01-133120_[redacted].hang
Jan 1, 2015, 01:16:02 PM /Library/Logs/DiagnosticReports/EtreCheck_2015-01-01-131602_[redacted].hang
Jan 1, 2015, 12:19:02 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-01-121902_[redacted].hang
Jan 1, 2015, 12:08:48 PM /Library/Logs/DiagnosticReports/AdobeReader_2015-01-01-120848_[redacted].hang
Jan 1, 2015, 12:08:47 PM /Library/Logs/DiagnosticReports/Safari_2015-01-01-120847_[redacted].hang
Dec 31, 2014, 03:43:36 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2014-12-31-154336_[redac ted].crash
Dec 31, 2014, 03:43:27 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2014-12-31-154327_[redac ted].crash
Dec 31, 2014, 03:43:22 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2014-12-31-154322_[redac ted].crash
Dec 31, 2014, 01:15:04 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2014-12-31-131504_[redac ted].crash
Dec 31, 2014, 01:15:02 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2014-12-31-131502_[redac ted].crash
Dec 31, 2014, 01:14:00 PM /Library/Logs/DiagnosticReports/WindowServer_2014-12-31-131400_[redacted].crash

Windows 7 blue screen on Mid 2010 iMac running 10.8

I had previously had the 64 bit version of Windows 7 Home Premium running on my mid 2010 iMac running 10.7. However, after upgrading to 10.8, my Windows installation would blue screen after booting. I suspect this was due to upgrading to 10.8 as I didn't make any changes to my Windows install because I only use it for gaming.
I've since removed the Windows partition, and tried a clean install via the Boot Camp Assistant. Windows installs just fine and boots cleanly. However, after installing the Apple Boot Camp drivers (freshly downloaded during the Boot Camp Assistant process), Windows blue screens upon booting. I can repair the Windows install using the built in process, but any attempt to install Apple's drivers results in blue screening. I've tried a clean Windows install and redownloading Apple's drivers several times with no luck.
Does anyone else have any suggestions on how to resolve this problem? Thank you for your help!

I do see this. And I suspect Windows updates. Not Apple (though I would be the first to suspect those too).
iMac graphic drivers for Windows seem touchy and common. The April Windows monthly patch updates hit a few iMac users.
One person found that if they only did updates in smaller steps and not all at once they were fine.
Tuesday this week was another Patch Tuesday.
Games, heat, disk blocks, even RAM errors - one person recently we went round and round... bad blocks not heat, new disk drive and they were 100% stable and rock solid but was hard to rule out. Windows though is easier to test RAM and sectors. And Lion was not even aware or sensitive to those bad sectors and read errors OR RAM errors that Memtest clearly showed (run in OS X).
One person had upgraded RAM, low and behold the new DIMMs were just not fully pushed in and seated and making good contacts.
Try to rule out hardware. Maybe you stumbled on bad block being used now. Run chkdsk if nothing else.
And when updating or preparing to, run Registry cleaner in CCleaner first, Go To %TEMP% and remove everything there. Make a system backup image to another disk drive (NTFS) or with WinClone 3 (HFS, $20) or CampTune ($20).
Or it could just be uninstall one driver at a time, start with GPU, look at what was last installed. Windows drivers are not desireable for GPU. Get the one from AMD or Nvidia instead.

Mid 2010 iMac upgraded SSD, can't seem to install windows via bootcamp. Windows can't be installed on this storage device. The chosen harddisk contains a MBR-partition-table. Windows can only be installed on GPT-harddisks on EFI-systems error

I have windows 8.1 on DVD & on USB CF Reader/Card. I've followed the full steps in bootcamp, but when it restarts and its time to select the bootcamp partition to install windows (after alt rebooting to the efi startup) I get the "Windows can't be installed on this storage device. The chosen harddisk contains a MBR-partition-table. Windows can only be installed on GPT-harddisks on EFI-systems" error.
I've scoured the internet trying different solutions that seem to work for everyone else, but to no avail. I've reformatted from that screen, doesn't help. I've removed bootcamp partition and manually partitioned using disk util, leaving it empty once partition-wise, and filling it with a blank partition the second time. I've done a full back up and clean re-install of Yosemite, and nothing seems to be working.
Thats when I switched to DVD install, as I heard sometimes you can't install with a CF card. When I alt-boot, I can see EFI-windows and windows, but if I select EFI-windows, same problem as before, and if I select windows, I get the black screen of "no bootable device please insert boot disk and press any key."
I've been stuck w/o bootcamp for over 2 years now. Anyone, please help?
Mid 2010 iMac running 256gb SSD, Yosemite 10.10.1 trying to install windows 8.1

I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

I can't install Mavericks on the new SSD in my mid-2010 iMac

I recently had my old 500 GB hard drive swapped out for a new 480 GB SSD on my mid-2010 iMac. I made a flash drive into an OSX Mavericks installer per instructions from online tutorials. With the flash drive inserted, I formatted the new SSD in disk utility and then selected it to install Mavericks. However, I can't complete the installation, which is supposed to take 26 minutes, because the screen goes black midway through. I tried this twice and the second time moved the mouse periodically to make sure that the computer wasn't going to sleep. Same thing happened. Installer says that the installation can be recovered, but it will not complete installation. Any advice much appreciated!

Wondering if this can be done
Yes.
http://www.ifixit.com/Device/iMac_Intel
Also I have 4 ram slots with 2gb in two of them can I install two sticks of 4gb in the empty ones without impacting performance
Yes. Recommended in pairs. So 2x2GB + 2x4GB SO DIMMS for a total of 12 would be fine.
http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27

I want to fit a SSD to my 21.5 3.06ghz mid 2010 IMAC; Is it possible to install the current 500gb sata drive into my older 20inch A1224 IMac?

My A1224 20 inch Imac has a damaged HD, so I am wondering if the 500 gb sata drive installed in my mid 2010 imac can be installed as I am looking to upgrade to SSD and would like to make use of the 'spare' HD.
If t.his is not possible can someone recommend the best drive to by for the older mac?
Thanks

My recommendation for the older drive would be to use it to create a bootable backup, that way you would have 2 backups. Your basic Time Machine backup and a redundant (very good idea for backups!!!) bootable drive. All you need is an expensive enclosure which you can find for less than $30.

Mid 2010 imac as a monitor for a windows PC

Similar Messages

Maybe you are looking for