Mid 2010 no USB Mouse or keyboard power? HELP!!
I bought a mid 2010 Mac Pro 2.8ghz Nahalem from the apple store over 1 month ago. After two weeks I had a five minute issue where after I rebooted, the mouse & keyboard would not respond. One quick reboot, the mouse and keyboard had power. Now I have a TV show I have to get to the station for tomorrow and I"m having this issue again and I've rebooted five times with no luck. I"m desperate here and I need to get this working. I did buy some new RAM from the Apple store, 4GB DDR3 PC3 240 pin 512MX72-8500 ECC. I put it in with the other three 1 gig sticks for 7gigs of RAM. Rebooted, no keyboard or mouse power. shut down, re-arranged the sticks in various configurations and even went back to just the three 1 gig sticks and again, the computer will boot up, get to the login window, but no power to the keyboard or my wireless mouse or should I say not responding and no caps lock light at all. Can I not have this RAM configuration and it blew something out? The bluetooth mouse battery was changed and I checked my keyboard which has a wired connection. It is fine. I even moved it to other USB slots. No go. Has anyone experienced this? Is there a PMU reset switch on these new mac models? I've been editing forever on a dual 1.6gh PowerMac with no problems. Rock solid. Now I'm on this Nahalem and this no keyboard or wireless mouse communication is killing me with this deadline. I NEED HELP!!!
After installing Windows 7 did you also install the Chipset Driver, Intel ME Driver, Keyboard and Mouse Driver and the USB 3 Driver? If you didn't then that would account for the various hardware items not being recognized. Always install the Intel Drivers first and then the rest.
The link below is for the available drivers from Lenovo for your model. Just select your operating system in the top box for the correct driver listing.......
https://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-k-series-desktops/leno...
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.
Similar Messages
-
macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before
If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
Good luck - take the issue as high up the food chain as you can and see what happens.
Clinton -
Hi all... My mid 2010 MacBook Pro took a keyboard spill. It still works but the display is very very dark. A faint image can only be seen at an angle in very bright light. I think this model has an LED screen. Can anyone please tell me what the fix for this is? Thank you sooooo much!
< Email Edited By Host >Spill Cleaning
Some liquid has just spilled into your Mac. What should you do?
Do
Immediately shut down the computer and unplug the power cord.
Remove the computer's battery (if you can)
Disconnect any peripherals (printers, iPods, scanners, cameras, etc.)
Lay the computer upside down on paper towels to get as much liquid as possible to drip out.
Note what was spilled on your Mac.
Bring the computer into an Apple store or AASP as soon as possible.
Don't
Don't try to turn it back on. Liquids can help electrical current move about the components of your Mac in destructive ways.
Don't shake the computer (this will only spread the liquid around).
Don't use a hair dryer on it (even at a low setting a hair dryer will damage sensitive components). -
USB mouse and keyboard don't work on HP Pavilion g7 2203sd, Windows 8.1.
It is not possible to use a USB mouse or keyboard on the HP Pavilion g7 2203sd notebook running Windows 8.1.
A wireless mouse used to work (already some time ago), but now wired or wireless mouse and keyboard don't work any more.
I have tried removing USB devices in the Windows Device Manager and let Windows detect them again, but it does not work.
I read somewhere that it might have to do with the xHCI USB controller that is installed.
I tried removing that and connecting the USB mouse but no succes.
I also looked for driver updates or something to disbale in the BIOS (like xHCI), but nothing found for that.
Can anybody help me with this problem.
Thanks!Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are having issues with the Keyboard on your Notebook.
We will surely assist you with this.
Let’s start with a questions.
1. Was there any liquid split on the Notebook Keyboard
2. Is there any Dust settled on the Notebook Keyboard
3. Are there any Keys which are fallen off / Any Keys which are loose
Troubleshooting:
Step 01. Could you please check and verify if External Keyboard works fine or not?
Note: Please click on the below shown link to find more troubleshooting steps
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03738933&tmp_task=solveCategory&cc=us&dlc=en&lc...
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP -
MacBook pro 13" mid 2010 "USB drawing too much power" HELP
Hi, my MacBook Pro keeps coming up with a window about 30 after start up saying "USB drawing too much power" and none if the USB ports work neither does the iSight camera (green light is constantly on) and the headphone jack won't work! I have tried re installing OSX but it hasn't worked! Apart from an SMC reset and a PRAM what else can I try? Absolutely nothing is plugged in not a single cable or keyboard or mouse just my MacBook on its own, is it definitely a software problem or am I going to have to get apple to repair the hardware because I do not have that much money to replace a logic board and get apple to replace it themselves. Thanks in advance!
I hope it works for you ...
-
MacBook Pro (mid-2010) Internal USB HUB freezes/locks up
MacBook Pro (mid-2010) wilth the latest firmware, etc.
OS X 10.9.1
USB KVM to share keyboard and mouse with another computer
This has been working flawlessly until I upgraded to 10.9.1
The KVM uses the Scroll Lock key to toggle the input between the two computers
I switch back and forth many times a day.
Almost once a day now, all my input to my MBP will lock up when switching the KVM over.
The MBP track pad, keyboard, blue tooth Magic Mouse, KVM mouse and keyboard all become unresponsive.
I am assuming that the interal keyboard/track pad/blue tooth transceiver are all tied to an internal USB HUB.
The MBP is up and running and I can ssh into it. The only error message in the log is that the mouse device coming from the KVM is busy and it will be disabled. I have tried to close the lid for several minutes and then re-open, but it does not resolve the issue. I have tried connecting another USB mouse/keyboard during this time and it will not work. I have tried kill -HUP on the usbd and USBAgent processes. Everything stays unresponsive. The only way to resolve this condition is to reboot the MBP. Note: the KVM works find on the other computer when I switch it back and forth regardless of the state of the MBP.
I am suspecting that when this happens it is some how disabling the internal USB HUB, which if all the other devices are connected through it, nothing no longer works (but maybe I am crazy with that thought). Anyone have any insight? Is there a way to reset the internal HUB short of a reboot?
Thanks in advance!I'm seeing the same problem with a 2010 Mac Mini with IOGear KVM and MS wireless mouse. This setup worked flawlessly for years on Snow Leopard but started hanging soon after the Mavericks upgrade. I'm running 10.9.4, currently the latest release. The system usually hangs after a KVM keyboard switch from Windows on the other set of KVM cables back to the Mac Mini. ssh into OSX works fine but a shutdown hangs indefinitely. top showed no processes spinning. The 1st console message after the hang was:
8/6/14 8:49:21.000 PM kernel[0] USBF: 1317978.201 AppleUSBHubPort: Port 2 of Hub at 0x6200000 about to terminate a busy device (Microsoft® 2.4GHz Transceiver v7.0) after waiting 10 seconds
There were no other messages for hours before this. I'm using VM Fusion but I think it hung once without it running. The Windows 7 side of the KVM works fine. -
Mac mini not recognizing USB mouse and keyboard upon boot
hey guys, i have a 2.4GHz mid-2010 mac mini with 2GB of ram, running 10.6.8 with all software up to date. this computer was purchased about two months ago. when i boot the computer, it does not recognize the USB keyboard or mouse though each is powered by the USB ports. oddly enough, after waiting for about 5-10 minutes, the keyboard and mouse magically begin to work normally and anything i did while they were both "frozen" happens all at once.
any ideas? i've done an SMC reset to no avail, tried other USB keyboards/mice, and i am unable to reset the PRAM because the keyboard doesn't work while the computer is booting. thanks in advance.yeah, i did all of that; former tech here. i might just nuke it and start over, i wanted to post and see if anyone had the same issue. bizarre thing is that it actually DOES recognise the peripherals and they start to work after about 5-10 minutes, 'remembering' everything i did while it was semi-frozen. i.e. the mouse starts clicking everything i clicked, the keyboard logs all keys pressed, and everything happens all at once as it 'wakes up'. haha. one of my co-workers told me that the girl before me who was using this mini wasn't too bright and had that whole macdefender thing happen so it might be some residual leftover from that.
it also takes a pretty long time to boot so i'm suspecting it may or may not be something hardware-related.
thanks for your response! -
USB mouse and keyboard not working
Any advice/thoughts/suggestions appreciated:
All 3 USB ports at the back of my iMac have stopped working. This means I can't use either a keyboard or mouse, so have no way of logging in. I turn my iMac on, it boots up as usual, but when it gets to the login screen, the mouse and keyboard don't work and I get a message about bluetooth set-up. (Both my mouse and keyboard are wired, not bluetooth).
I have tried an SMC reset (by turning the iMac off, unplugging all USB devices and the power cable, leaving the iMac for a few minutes and then plugging the cable back in a turning it on again). This didn't work.
I've also tried a different version of the SMC reset where I hold down the power button whilst all the cables are unplugged and also as I plug the power cable back in. After doing this, the fan turns on at full speed (v loud), but the mouse and keyboard still don't work.
I've also checked my mouse on a different computer and it works fine.
Has anyone got any other suggestions / workarounds?
Note I can't do a PRAM reset because my keyboard doesn't work.
Is it probably that the USB hardwear has failed? If so, is it possible to repair this? It is worth repairing given it is a 5/6 year old iMac (the white plastic one) which is probably on its last legs anyway?
many thanks!
Jez.Try the SMC reset again, only this time wait 5 minutes in set 3 instead of fifteen seconds.
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds. 5 minutes.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer. -
Please can somebody help me with this.
i cannot get any mouse or keyboard input on my login screen after bootcamping windows 7 pro.
i used a correctly formatted drive for the driver downloads, they seemed to install but now i have no input method to login to wondows7.
all is fine in osx apple wireless mouse keyboard magicpad ok
windows cant login due to no input devices.
have connected logitech mouse keyboard still nothing.
please help!
thanks in advance1. I have tried copying the Keyboard/Trackpad/Mouse drivers to the $WinPEDriver$ directory with mixed success on a 2012 MBP.
2. My experience is based on a 2013 rMBP. You may be able to use an Apple USB Keypad/Mouse to better success.
3. See http://www.macworld.com/article/2460820/macbook-pro-mid-2014-review-minor-update -offers-slightly-better-cpu-performance.html for HW differences between the two machines.
4. If you have access to a 2013 rMBP, I can suggest trying to build the USB on that and working with the USB to see if you can make it install Windows. the rMBP 2014 and rMBP 2013 have the same HW, except some CPU changes. You can also try building the USB at the nearest Apple store, if possible.
5. There is a section in AutoUnattend.xml, which is supposed to install all drivers in $WinPEDriver$ (see this http://support.microsoft.com/kb/2686316 )
<component name="Microsoft-Windows-PnpCustomizationsWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>$WinPEDriver$</Path>
</PathAndCredentials>
</DriverPaths>
</component> -
IMac not recognizing bluetooth nor USB mouse and keyboard
The iMac I use has suffered a pretty annoying problem. I typically use a wireless keyboard and magic mouse with the iMac (I could be wrong, but I believe these both use Bluetooth technology). First, the iMac stopped recognizing these. They kept losing connection last Friday and then suddenly stopped recognizing them at all. Yes, they both have full batteries and blink to show me they are on and searching for the iMac.
Second, I tried using a USB mouse and a USB keyboard to get into the iMac and fix the problem. But neither are recognized by the iMac as well. The mouse is a Dell model that has a red light on the bottom, and it glows red for less than a second when I plug it into the USB port before going dark again and not working. So, I can't get into the iMac to fix the problem.
I've read a few other things on the community boards. I restarted the iMac. I unplugged it completely for several minutes and held down the power button for fifteen seconds while the power was unplugged. I've tried multiple mice and keyboards, all to no effect.
Is the iMac not recognizing the USB keyboard/mouse because it's still searching for the bluetooth versions that it will no longer recognize? Is there a way to fix this without setting up an appointment with the geniuses?
Thanks!I'm having the same problem. It started happening on my Late 2012 model iMac 21.5" after applying the latest update.
What I found was that nothing seemed to work connected directly to the iMac. However, if you attach an externally powered USB hub, then all devices attached to the hub will work. It seems as if the USB ports are still working, but without power.
After I was able to get my USB keyboard to work, I was able to zap the PRAM (hold command-option-P-R while powering on) and then magically everything was back to working again. Unfortunately, this was short lived as the problem has resufaced again for me today, but you could give it a try anyway. -
Wake from sleep when docked to Mini Dock using USB mouse or keyboard attached to dock
I'd like to know how to wake a T520 connected to Mini Dock (type 4338). I have a basic USB mouse (wired) connected directly to the dock. I've verified all of the items in Device Manager (mice and USB ports) are enabled for "waking the computer".
In the article below, Lenovo says it's not possible to wake it by connecting directly to the dock....they say it's "not a limitation of the dock"... but "by design". Of, course that's the line all companies say now a days. But it CLEARLY IS A LIMITATION. They say the only way is using the power button on the dock. What a waste.
Lenovo article:
http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?DocID=HT077684the
-
No USB mouse or keyboard installing Win7
No mouse or keyboard when installing Windows 7 Pro in new K450e.
PC boots to Win7Pro media.
No USB mouse. Lazer light not on.
USB keyboard not responsive.
BIOS set to Legacy.
Found no mouse /keyboard setting in BIOS.
USB enabled in BIOS.
What is the issue?
himeAfter installing Windows 7 did you also install the Chipset Driver, Intel ME Driver, Keyboard and Mouse Driver and the USB 3 Driver? If you didn't then that would account for the various hardware items not being recognized. Always install the Intel Drivers first and then the rest.
The link below is for the available drivers from Lenovo for your model. Just select your operating system in the top box for the correct driver listing.......
https://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-k-series-desktops/leno...
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance. -
Satellite L20: Can I disconnect devices like USB Mouse without turning power off?
Hi, all.
I'm an owner of Satellite L20 notebook. I have always turned power of my computer off when i need to connect or disconnect any USB Device. Some devices have a special icon on the taskbar to disconnect them but some doesn't (USB FDD or flash disks). Can I disconnect and connect devices like USB Mouse or Scanner wihtout turning power off?Hi
Of course that you can do this. Because of that there is Safely remove Hardware option. All external devices connected on your unit should be listed there. If you want to remove some of them click on it and click on STOP button.
When the selected device disappears from the list you can remove it from the port. I have done this many times with different units and external devices ithout any problems. -
Huawei e220 hangs on Mac Mini G4 and USB mouse and keyboard slow way down
I have a Mac Mini G4 running os10.5.8 My mouse and keyboard are a creative wireless combination that go to a USB hub then to the USB port on the mini. When I use my Huwei e220 wireless broadband modem, it frequently hangs when disconnecting, and the mouse and keyboard barely work. Activity monitor shows the CPU load is not very high at all, yet the mouse is almost stuck. If I put the computer to sleep, then it comes back and works fine. Its a bit of a hassle, and seems to be specific to the USB on the mac mini.
Is the modem connected via USB?
-
Mid-2010 Macbook pro repeated crashes after service, HELP!
I have a mid-2010 Macbook pro with the i7 and 8gb of crucial ram. I have had this problem for months and finally took it into the authorized Mac repair center where I live. The nearest apple store is 4 hours away. He put it through 3 days of testing and found no problems with any hardware, including the RAM. I can't find my apple ram so I haven't tried to run my laptop with that. Anyway, we did a HD wipe and restored from the recovery drive to see if that was the issue. No luck. The logic board also passed all tests. The computer crashes with any amount of stress (garageband, iPhoto, or simply surfing the web with an external display) and is impossible to get work done. I'll paste the crash report below. I would love to try to find another solution!
Thanks all,
Brian
MacBook Pro (15-inch, Mid-2010)
2.66GHz Intel Core i7
8GB 1067 MHz DDR3 (crucial)
Intel HD Graphics 288 MB
*** Panic Report ***
panic(cpu 1 caller 0xffffff7f879caf63): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff812070e000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.7.21/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 1), Frame : Return Address
0xffffff810f7bb0b0 : 0xffffff8004d3a811
0xffffff810f7bb130 : 0xffffff7f879caf63
0xffffff810f7bb210 : 0xffffff7f858c2b9f
0xffffff810f7bb2d0 : 0xffffff7f8598c18e
0xffffff810f7bb310 : 0xffffff7f8598c1fe
0xffffff810f7bb380 : 0xffffff7f85c0b056
0xffffff810f7bb4b0 : 0xffffff7f859af82d
0xffffff810f7bb4d0 : 0xffffff7f858c95f1
0xffffff810f7bb580 : 0xffffff7f858c70fc
0xffffff810f7bb780 : 0xffffff7f858c8a4b
0xffffff810f7bb850 : 0xffffff7f86fd6018
0xffffff810f7bb970 : 0xffffff7f86fd5237
0xffffff810f7bb9a0 : 0xffffff7f86fccc8d
0xffffff810f7bb9e0 : 0xffffff7f86fcd45a
0xffffff810f7bbab0 : 0xffffff7f86fc8129
0xffffff810f7bbae0 : 0xffffff7f86fab3a4
0xffffff810f7bbb30 : 0xffffff8005301c92
0xffffff810f7bbb60 : 0xffffff8005302859
0xffffff810f7bbbc0 : 0xffffff8005300003
0xffffff810f7bbd00 : 0xffffff8004dea517
0xffffff810f7bbe10 : 0xffffff8004d3e91c
0xffffff810f7bbe40 : 0xffffff8004d235a3
0xffffff810f7bbe90 : 0xffffff8004d33e8d
0xffffff810f7bbf10 : 0xffffff8004e0a142
0xffffff810f7bbfb0 : 0xffffff8004e3ac66
Kernel Extensions in backtrace:
com.apple.driver.AppleMuxControl(3.7.21)[32B7E2DE-1F9D-3555-B687-7A76A62B81D2]@ 0xffffff7f879bc000->0xffffff7f879cffff
dependency: com.apple.driver.AppleGraphicsControl(3.7.21)[62689710-EEA7-307A-AC83-B8F25DA88 A6A]@0xffffff7f879b4000
dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7f857a9000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f85524000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f8581b000
dependency: com.apple.driver.AppleBacklightExpert(1.1.0)[0183904C-6A16-32C4-9405-EEFD7F820B 02]@0xffffff7f879b7000
com.apple.nvidia.classic.NVDAResmanTesla(10.0)[796AE430-39FB-3255-8161-D52AFA28 EE2B]@0xffffff7f85872000->0xffffff7f85adbfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f85524000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7f85862000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f8581b000
com.apple.nvidia.classic.NVDANV50HalTesla(10.0)[7FE40648-F15F-3E18-91E2-FDDDF4C DA355]@0xffffff7f85ae6000->0xffffff7f85d8ffff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(10.0.0)[796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f85872000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f85524000
com.apple.GeForceTesla(10.0)[67CD214F-0F26-3BEF-BAD0-CF0F83C2616D]@0xffffff7f86 f6e000->0xffffff7f8703bfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f85524000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7f85862000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f8581b000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(10.0.0)[796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f85872000
BSD process name corresponding to current thread: com.apple.WebKit
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000004a00000
Kernel text base: 0xffffff8004c00000
__HIB text base: 0xffffff8004b00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 3759902994846
last loaded kext at 525712526450: com.apple.filesystems.cd9660 1.4.4 (addr 0xffffff7f87b17000, size 36864)
last unloaded kext at 2249371357208: com.apple.filesystems.cd9660 1.4.4 (addr 0xffffff7f87b17000, size 32768)
loaded kexts:
com.apple.filesystems.smbfs 3.0.0
com.apple.filesystems.ntfs 3.12
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.37
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435434473353313036374D2E4D3136464D52
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435434473353313036374D2E4D3136464D52
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS545050B9SA02, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Internal Memory Card Reader
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: Keyboard Hub
USB Device: 2.4GHz 2way RF Receiver
USB Device: Apple Keyboard
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:I have a mid-2010 Macbook pro with the i7 and 8gb of crucial ram. I have had this problem for months and finally took it into the authorized Mac repair center where I live. The nearest apple store is 4 hours away. He put it through 3 days of testing and found no problems with any hardware, including the RAM. I can't find my apple ram so I haven't tried to run my laptop with that. Anyway, we did a HD wipe and restored from the recovery drive to see if that was the issue. No luck. The logic board also passed all tests. The computer crashes with any amount of stress (garageband, iPhoto, or simply surfing the web with an external display) and is impossible to get work done. I'll paste the crash report below. I would love to try to find another solution!
Thanks all,
Brian
MacBook Pro (15-inch, Mid-2010)
2.66GHz Intel Core i7
8GB 1067 MHz DDR3 (crucial)
Intel HD Graphics 288 MB
*** Panic Report ***
panic(cpu 1 caller 0xffffff7f879caf63): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff812070e000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.7.21/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 1), Frame : Return Address
0xffffff810f7bb0b0 : 0xffffff8004d3a811
0xffffff810f7bb130 : 0xffffff7f879caf63
0xffffff810f7bb210 : 0xffffff7f858c2b9f
0xffffff810f7bb2d0 : 0xffffff7f8598c18e
0xffffff810f7bb310 : 0xffffff7f8598c1fe
0xffffff810f7bb380 : 0xffffff7f85c0b056
0xffffff810f7bb4b0 : 0xffffff7f859af82d
0xffffff810f7bb4d0 : 0xffffff7f858c95f1
0xffffff810f7bb580 : 0xffffff7f858c70fc
0xffffff810f7bb780 : 0xffffff7f858c8a4b
0xffffff810f7bb850 : 0xffffff7f86fd6018
0xffffff810f7bb970 : 0xffffff7f86fd5237
0xffffff810f7bb9a0 : 0xffffff7f86fccc8d
0xffffff810f7bb9e0 : 0xffffff7f86fcd45a
0xffffff810f7bbab0 : 0xffffff7f86fc8129
0xffffff810f7bbae0 : 0xffffff7f86fab3a4
0xffffff810f7bbb30 : 0xffffff8005301c92
0xffffff810f7bbb60 : 0xffffff8005302859
0xffffff810f7bbbc0 : 0xffffff8005300003
0xffffff810f7bbd00 : 0xffffff8004dea517
0xffffff810f7bbe10 : 0xffffff8004d3e91c
0xffffff810f7bbe40 : 0xffffff8004d235a3
0xffffff810f7bbe90 : 0xffffff8004d33e8d
0xffffff810f7bbf10 : 0xffffff8004e0a142
0xffffff810f7bbfb0 : 0xffffff8004e3ac66
Kernel Extensions in backtrace:
com.apple.driver.AppleMuxControl(3.7.21)[32B7E2DE-1F9D-3555-B687-7A76A62B81D2]@ 0xffffff7f879bc000->0xffffff7f879cffff
dependency: com.apple.driver.AppleGraphicsControl(3.7.21)[62689710-EEA7-307A-AC83-B8F25DA88 A6A]@0xffffff7f879b4000
dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7f857a9000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f85524000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f8581b000
dependency: com.apple.driver.AppleBacklightExpert(1.1.0)[0183904C-6A16-32C4-9405-EEFD7F820B 02]@0xffffff7f879b7000
com.apple.nvidia.classic.NVDAResmanTesla(10.0)[796AE430-39FB-3255-8161-D52AFA28 EE2B]@0xffffff7f85872000->0xffffff7f85adbfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f85524000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7f85862000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f8581b000
com.apple.nvidia.classic.NVDANV50HalTesla(10.0)[7FE40648-F15F-3E18-91E2-FDDDF4C DA355]@0xffffff7f85ae6000->0xffffff7f85d8ffff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(10.0.0)[796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f85872000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f85524000
com.apple.GeForceTesla(10.0)[67CD214F-0F26-3BEF-BAD0-CF0F83C2616D]@0xffffff7f86 f6e000->0xffffff7f8703bfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f85524000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7f85862000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f8581b000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(10.0.0)[796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f85872000
BSD process name corresponding to current thread: com.apple.WebKit
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000004a00000
Kernel text base: 0xffffff8004c00000
__HIB text base: 0xffffff8004b00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 3759902994846
last loaded kext at 525712526450: com.apple.filesystems.cd9660 1.4.4 (addr 0xffffff7f87b17000, size 36864)
last unloaded kext at 2249371357208: com.apple.filesystems.cd9660 1.4.4 (addr 0xffffff7f87b17000, size 32768)
loaded kexts:
com.apple.filesystems.smbfs 3.0.0
com.apple.filesystems.ntfs 3.12
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.37
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435434473353313036374D2E4D3136464D52
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435434473353313036374D2E4D3136464D52
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS545050B9SA02, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Internal Memory Card Reader
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: Keyboard Hub
USB Device: 2.4GHz 2way RF Receiver
USB Device: Apple Keyboard
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:
Maybe you are looking for
-
Looking for a time-stretching app
Can you guys recommend your favourite time-stretching app? I'd like to find an easier way of lining up transients to beats, for example. Thanks, Shaun
-
I am in a crunch - I am using a template from Muse Templates to create a website for someone. It's due TONIGHT! I need to add videos and pictures and text and slideshows to different areas of the site. I put them in place and then as soon as I previe
-
I cannot sign a text to pdf the option is not activated
how do i sign a text into the pdf document? it's not working, the option is clickable though
-
Where can I find a new Magsafe power adapter for my late 2008 Macbook Pro
my magsafe adapter has failed and it appears apple no longer makes one for my MacBook Pro. Any ideas on where to find one?
-
OSB 10gR3 MQ transport - How to loadbalance with MQ cluster?
Hi, I'm using MQ transport to put and get messages from OSB 10.3.1. I would like to know how a Proxy/Business Service can be configured to make use of an MQ cluster (or an MQ Queue Manager cluster to be specific)? Thanks in advance Vikas