Mid casio lk 100 no work

pro 8 only plays back threw my casio but wont play when i hit the keys,
what i did. new track "software ist" i select I/O piano and hit my key board nothing. i use the caps lock GUI comes up and i can here the sound. i use the keyboard layout and it plays on my casio and i create a song and it plays on my casio, but when i try to record it only detect. im using m audio uno midisport to connect, and my casio only have two modes a local on and local off.

threw my casio but wont play
It probably broke when you threw it...

Similar Messages

  • Casio CDP 100 not working

    I bought a Casio CDP 100 and a MIDI to USB cable. I cannot seem to get my computer to recognize the keyboard. Can someone walk me through how to set it up? I need to do this for Garageband but more importantly, Reason 3.0

    trying to figure out how I can get my Casio CDP to send signal into my Logic Pro
    Here's something you could try. (These instructions are basically for 10.6; in 10.5 it's similar.) Find this program:
    Macintosh HD/Applications/Utilities/Audio MIDI Setup
    Launch it. Use the Window menu to show and view the MIDI window (which is probably called "MIDI Studio"). It should look something like this (this screenshot is from 10.5; in 10.6 it's similar):
    You should see that icon marked Mbox 2. Do you?

  • Logic midi exporting problems (does not work with cubase)

    ok so there is an audio file i need converter to midi for something i'm working on someone with who uses cubase...
    so basically an audio file from cubase needs audio to midi. since cubase does not have this feature i imported the .aif file from the cubase project and used audio to score to extract midi. i then exported the midi file and imported it back into the cubase project and it was not aligning with the audio file.
    note that the cubase project has variable tempos but i imported the file into default tempo and extracted the midi in the default tempo mode. but this shouldn't be a factor since midi conforms to current tempo so when it gets reimported back into cubase it should sync with the project tempo there....
    can anyone help???

    Hi
    Diogo Colaço wrote:
    Already tried with different keyboard and I have find out that the keyboard that I use at home only sends midi via channel 4...
    You have a couple of choices:
    Within the EVB, change the Keyboard Mode to single. You may need to do this a couple of times to get it to work. You would also need to do this for every EVB preset that you use
    You could setup the organ Instrument Channel Strips as "Multi-Timbral" with the incoming MIDI mapped to Channel 1. You would need to do this for every Organ Strip that you want to use in your MS Concert.
    CCT

  • What is mid night magic concept in work flow

    what is mid night magic concept in work flow i want a clear explanation

    Hi Neo,
       You might have read about this in the book 'Practical Workflow for SAP'....This is actually about buffering...Normally buffers wont get updated until the next day...
    due of this the new tasks added to the workflow template will not be effective until the buffers are refreshed...You may face this problem during development.....
    In production you may face this problem when you transport a new version of the workflow..it might not get updated until the next day....So everything happens during the mid night...
    But there is a workaround :  you can always synchronize the runtime bufferes by executing the transaction SWU_OBUF...which is not suggested in a production system
    Hope this helps...
    Thanks & Regards
    Srinivas

  • Does anyone have a Mac Mini (MID-2007) with wifi that works?

    Does anyone have a Mac Mini (MID-2007 C2D) which wifi works?
    It seems that Mac Mini has different models and some have a Broadcom Wifi card and some Atheros WIFI card. I'm trying to find user whom Mac Mini 2007 with atheros card works. Since os x 10.6 and 10.7 my wifi have not worked at all. I even changed internal antenna. Also attached external antenna on WIFI cards ext port. Still very poor connection. Also sometimes when my mac wakes from sleep country code of WIFI card is US not FI as rest of my family macs. WIFI is made with apple extreme router (802.11n). 2.4 and 5 Ghz networks. I do not have network interference. With Minimac Atheros card has support b and g network with 2.4 Ghz and a network with 5 ghz. Signal ratio is average -80 dbm, and speed varies from 6-36. Both a and g networks work same way on minimac. When I turn machin on wifi is usable about 1-2 minutes then latency will rice and after that timeout will occur on network. Still mac mini is connected to network.
    Atheros firmware is: 5424: 2.1.14.9
    Card: Airport Extreme (0x168c, 0,86)
    Location: ETSI
    Country: FI
    Security: NONE
    PHY: 802.11a
    There are a lot of guides on net how to get it working; eg. change older OS kext, remove preferences, install os again (done all that, nothing works, but older kext files seem to work little better). But does any one have a Mac Mini with working wifi. What brand is your router and is the card in minimac original Atheros. Broadcom seems to operate Apple Extreme router quite well.

    My Mac Mini Mid 2007 has the same specs:
    Card: AirPort Extreme (0x168c, 0x86
    Firmware: Atheros 5424: 2.1.14.9
    Ever since I upgraded to 10.7.2, my WiFi has been running painfully slowly. Same issue: it works okay for a minute or two, but then slows to a crawl, with network timeouts, etc. And it shows I'm still connected to the network. It gets particularly bad when waking from sleep, unless I quit my web browser first, then put the machine to sleep. (Waking the machine with browser still "launched" causes big problems.)
    Has anyone figured out a workaround for this issue?

  • My printer crashed mid printing photo.  Printer works OK in other apps.  Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any

    Ooops I put the lot in the strap line!
    My printer crashed mid printing photo.  Printer works OK in other apps.  Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
    I would be grateful for help!!  Obviously...

    Probably best to ask in Photoshop General Discussion
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Hi, i hv macbook mid 2010 ..it was working fine till few days back but after updating it to mavericks, it keeps on shutting down itself...what to do ? could sm1 help me out ?

    hi, i hv macbook mid 2010 ..it was working fine till few days back but after updating it to mavericks, it keeps on shutting down itself...what to do ? could sm1 help me out ?

    The startup disk may need repairing...
    Startup your Mac while holding down the Command + R keys.
    From there you should be able to access the built in utilities in OS X Recovery

  • IMac (Mid-2007) USB Ports Not Working

    So all of a sudden my iMac (Mid-2007) USB ports stopped working.
    I turn on the iMac and it boots up. I can see desktop. I see the cursor in the upper left hand corner. I tried to use my Apple keyboard and mouse and nothing moves. I tried several different keyboards and mice and still the problem persists. I shut down and reboot it restarts and the same problem.
    I've read several posts on the Internet stating it could be a power supply issue. If it was PSU why does it even start up. If its logic board thats an expensive repair as I've already looked around for logic board replacements. I wouldn't even know what Apple would charge to fix this issue.
    Can somebody help with this issue?

    Reset the SMC > Resetting the System Management Controller (SMC) only wait for a few minutes in step three instead of 15 seconds.
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds. <---- Wait a few minutes.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    Then if that doesn't reset the USB port overload protection, go to >  Apple - Find Locations and contact your local AASP to get an estimate.

  • MIDI-In not working from my Casio PX-100 keyboard to Audigy card. HELP

    Hi, I hope someone can help me with this. I've searched on google, in this and many other forums. It seems like alot of people have this sort of problem. I've tried various solutions suggested to other people but to no avail. I actually have 2 problems. . MIDI-in isn't working2. I get the message "timeout error" when I try to send MIDI files to the keyboard using the SMF converter. I'm running widows XP Pro service pack 2, MSI K8N Neo motherboard, creative Audigy soundcard with the latest drivers, ATI All in one wonder graphics card, M-Audio Soundcard MIDI cable which connects to the game/joystick port which you can view [url="http://www.m-audio.com/products/en_us/SoundCardMIDICableMale0ft-main.html">here.[/url]?MIDI out works. I tried re-installing the Audigy drivers after using software to remove all other audio drivers. AC97 is disabled in the BIOS. I used the keyboard in AudioHQ to test? MIDI-In - I have MIDI-IO selected in the MIDI options for the keyboard. As for?the SMF converted, I don't understand why my keyboard?can play MIDI files from my computer but the converter doesn't work. I've tried many other things. Maybe a USB cable will work?Thanks.

    JOY
    !!! Bought a USB/MIDI cable and it worked first time!

  • Using casio lk 100 as a midi controller

    i have everything set up right, i know its work cause logic pro 8 plays the out put on my keyboard , the issue is that neither pro or garage plays back the midi notes. garage detects 1 midi and when i go to midi setup its detect a usb uno midi, but when i hit the keys i can see the response but it doesn't record.

    Never mind, I figured it out.

  • Midi Fader Control doesn't work correctly.

    Hello,
    I have a Yamaha ProMix 01 midi controller which i want to use in Mainstage.
    If I learn a fader in mainstage everything works fine, and I can control a fader in Mainstage from yhe Promix.
    However, if i go to "perform" the fader jumps from 0% to 100% up and down really fast, if i move the fader on my Promix.
    Who can help me?
    See video for more details.
    http://www.youtube.com/watch?v=4PrWudWMYRw
    You can see the midi input details at the end of the video.
    Thanks,
    Klaas

    Hi
    Looks like the Promix is transmitting MIDI Note messages with velocity as the "range"???
    MS does not like Note message velocity as a "continuous control".... or so it seems??
    Can you reassign the transmitted MIDI message to a CC on the Promix?
    CCT

  • Will Privia PX-100 keyboard work with Garageband?

    A friend is selling a Casio Previa PX-100 MIDI keyboard. It doesn't have USB, but I was hoping to use a MIDI-USB converter cable. Anyone had any luck with this keyboard or ones similar?
    Thanks,
    Alfredo

    We're having what may be the same problem with a Casio PX-400R. See topic "Casio Privia Keyboard and Garage Band". Another discussion on the topic is "how do I find out if a keyboard is compatible."
    We have a usb and a midi output. We've only connected with the usb device cable and the keyboard is not recognized. We found a store with a midi interface, but hesitate to spend the money if it is not likely that will solve the problem. Mac is not listed as one of the drivers on our Casiso CD listing of downloads so we think using a Casio with a Mac may be a no-go.
    Our Casio manual only references outputting to a "computer". We're still holding out some hope.
    If you have a midi cable and try it, we will be interested in the results.
    good luck.

  • My iPad 3 is not charging on my macbook pro mid-2012. It was working yesterday and it is not working now, and I'm trying to transfer files between them. How do I charge my iPad with my macbook without having to be a completely new computer?

    I am trying to transfer files between my ipad 3 and my macbook pro mid-2012 and they will just not connect. I connected them yesterday and it worked fine. And i can not air drop these files into my ipad it has to be done through itunes. And i can not afford to buy a new computer. How do i get these two to connect without having to buy a completely new computer?

    Computer USB ports, regardless of the computer maker, have a relatively low power output and thus are not good chargers. They will charge but it takes a long time. You should be charging your iPad from wall power, or a more powerful source like an in-car charger.
    Buying another computer will not change that.

  • HT4951 Can i use a Thunder bolt display with an iMac from the mid 2009 ? Would it work if connected to a mini dvi port in a scaled down mode or is it compulsory to have a thunder bolt port ?

    I have a mid 2009 iMac that doesn't have Thunderbolt display, but has a mini-dvi port.
    Will the Thunderbolt cinema display 27" still work when connected to this mini-dvi port ?
    I thought it would be better going for a thunderbolt display monitor rather than the older version, so when i upgrade my machine in the future it stays compatible.

    I have a mid 2009 iMac that doesn't have Thunderbolt display, but has a mini-dvi port.
    Will the Thunderbolt cinema display 27" still work when connected to this mini-dvi port ?
    No.  A TB display can only be connected to a TB source. 
    Confusing Mini DisplayPort with Thunderbolt
    As indicated in that artical a displayport device can be connected to a TB source.  But that is not your situation.

  • How can I get an old Casio CTK-593 to work with Logic Express?

    Title pretty much says it all.
    I have a Fast Track USB from M-Audio to connect it to my pc but I don't know how to get it working with Logic.
    Thanks in advance.

    Did you check your connection with the audio-midi-setup.app in the programs/utilities folder of your MAC (not "pc" pls)?
    If you have a working MIDI connection, you'll need to open up a software instrument track within Logic to play Logic's instruments via your keyboard.
    Fox

Maybe you are looking for