Middle button doesn't work for my nano
Just purchased a waterproof nano shuffle. Works great until the middle button stopped working. Is it the nano or something I am doing worng???
Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
My iPod 5th generation won't turn on and my middle button doesn't work
My ipod 5th generation won't turn on and my middle button doesn't work! What will I do? It all starmed when I updated iOS 8. It would be fine but would shut down at random, now it won't turn on at all!!! when I press the lock button to turn it on the Apple sign would come up for about 5/10 minutes!! so what will I do???
Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?
Settings>General>Accessibility>(scroll down to)AssitiveTouch and change to Off
-
The back button doesn't work for some websites after downloading version 4.0
I recently downloaded firefox version 4.0. Upon downloading it I had a few issues occur with my browser. One issue was that all of my bookmarks that were on my toolbar disappeared. Also, when I visit a website and am browsing through it, if I want to go back to a previous page the back button doesn't work properly. Instead of sending me back to the previous page I was viewing it sends me all the way back to the home page or wherever I started on that website. This problem basically affects all websites that I visit. I would like to uninstall the new version of firefox and just go back to my old one if that's possible? Thanks
To respond to your comments first of all, the Bookmarks toolbar has been removed in Firefox 4.0
The back button should work as it normally does, but you can also right click it and select it from the list.
To revert to a previous version of Firefox, download v3.6.16 from here: [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.16]
Then uninstall Mozilla Firefox 4.0 choosing to keep your bookmarks, customizations etc.
Finally run the Firefox installation file you downloaded earlier. -
The browser's back button doesn't work for portlet navigation
I developed a simple portlet that uses webflow navigation to navigate within a
portlet. I made this portlet visible on a portal's home page. When I view my
main portal page, the URL is "http://localhost:7501/samplePortal/index.jsp "
In this page I can see my portlet. When I click on a link inside of the portlet,
it takes me to the page I want. Then, when I click the browser's back button
to go back to the previous page(main portal page), it doesn't work. The URL changes
back to "http://localhost:7501/samplePortal/index.jsp", but portlet itself doesn't
take me to the previous page. Anybody have any ideas? I am guessing it's because
the wfevent is null, but how do I resolve this problem?Hi Jay,
I was able to get the back button to work for portals by commenting out the following
lines in the portal.jsp:
// prevent caching these pages at clients.
// response.setHeader("Cache-Control", "no-cache"); // HTTP 1.1
// response.setHeader("Pragma", "no-cache"); // HTTP 1.0
// response.setDateHeader("Expires", 0); // prevents caching at proxy
I also made sure my browser was set to allow the caching of pages.
You are having problems, because we set the response headers to tell the browser
to not cache the portal pages, and the portlet state has not changed back to it's
original state.
-John Bimson
"Jay" <[email protected]> wrote:
>
I developed a simple portlet that uses webflow navigation to navigate
within a
portlet. I made this portlet visible on a portal's home page. When
I view my
main portal page, the URL is "http://localhost:7501/samplePortal/index.jsp
In this page I can see my portlet. When I click on a link inside of
the portlet,
it takes me to the page I want. Then, when I click the browser's back
button
to go back to the previous page(main portal page), it doesn't work.
The URL changes
back to "http://localhost:7501/samplePortal/index.jsp", but portlet itself
doesn't
take me to the previous page. Anybody have any ideas? I am guessing
it's because
the wfevent is null, but how do I resolve this problem? -
The back button doesn't work for microsoft outlook
the back button for microsoft outlook web access doesn't work. other web pages are fine
To respond to your comments first of all, the Bookmarks toolbar has been removed in Firefox 4.0
The back button should work as it normally does, but you can also right click it and select it from the list.
To revert to a previous version of Firefox, download v3.6.16 from here: [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.16]
Then uninstall Mozilla Firefox 4.0 choosing to keep your bookmarks, customizations etc.
Finally run the Firefox installation file you downloaded earlier. -
The macbook pro keyboard media buttons doesn't work for itunes
hi,
since i installed the snow leopard the buttons doesn't control (play, stop, forward...) the itunes.Hey ARM77,
Welcome to the BlackBerry Support Community Forums.
There is a few things I will suggest to hopefully fix this issue for you.
1. Is mass storage mode currently enabled when you hook your BlackBerry to the Mac? If not please read KB13564.
2. Is your iTunes updated to the very latest version?
3. Verify that your media card has a sufficient amount of memory available for the playlists. To check this, perform the following:
In BlackBerry® Desktop Manager, click Device Options. On the Media tab, decrease the amount of memory that is kept free for files other than your music files.
than your music files.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
Shutdown button doesn't work for sleeping from the home screen.
I'm using Mac Mini 2011, with Mavericks. Until Mountain Lion, when I pressed once the startup/shutdown button the machine sleeps. Now, with Mavericks, it doesn't work, we hear a beep instead. How to fix this problem?
OS X Mavericks: Using the power button
-
Hold Button Doesn't Work for Random Periods of Time
Over the past few months I have been having massive issues with my ipod.
It all started about 4 months ago when the hold function, without me turning it on with the switch, began to turn itself on. This would happen at random periods, for random periods. Sometimes it goes on for a couple of hours, sometimes for a couple of seconds. When the ipod began to get this problem I had been using it consistently for about a year.
Resetting it does not help - I have tried it countless times. I have noticed it tends to do it more when the battery is not full, but it still has issues when it is. I tried restoring it last night to no avail - it didn't fix the problem.
My warranty has expired so I don't wish to waste my time and money sending it to apple if it is a simple issue.
Does anyone know what's causing the problem? Anyone have a DIY solution?
Thanks in advance and happy easter.i used my ipod for a while. and yesterday it was on low battery, very low.
and the HOLD button, doesnt worked!
i charged my ipod but the hold button never work again!!
i reset it with the soft and with the buttons, but nothing!
who can fix it in argentina??
thanks.
andrews -
Print and Export button doesn't work for Crystal Report in VS 2008
Hi,
When I click on the Export/Print button, it looks as if something is happening but no window comes up. Below is the code in C#
ExportOptions crExportOptions;
DiskFileDestinationOptions crDiskFileDestinationOptions;
ReportDocument cr = new ReportDocument();
DataTable dt = new DataTable();
cr.Load(strReportPath);
cr.SetDataSource(dt);
string Fname;
if (!System.IO.File.Exists(strReportPath))
throw (new Exception("Unable to locate report file:\n" + strReportPath));
//CrystalReportSource1.ReportDocument.
// Set the Crytal Report Viewer control's source to the report document.
CrystalReportViewer1.ReportSource = cr;
// cr.PrintToPrinter(1, False, 0, 0)
Fname = Request.PhysicalApplicationPath.ToString() + Session.SessionID.ToString() + ".rpt";
crDiskFileDestinationOptions = new DiskFileDestinationOptions();
crDiskFileDestinationOptions.DiskFileName = Fname;
crExportOptions = cr.ExportOptions;
crExportOptions.DestinationOptions = crDiskFileDestinationOptions;
crExportOptions.ExportDestinationType = ExportDestinationType.DiskFile;
crExportOptions.ExportFormatType = ExportFormatType.CrystalReport;
cr.Export();
Can anyone tell me why is this happening, need to fix this urgently.
Thanks,
ReenaHi,
I removed all the export code, now when the Page loads. When I click on the export/print button still nothing happens.
"Error in File C:\DOCUME1\rpatel\LOCALS1\Temp\DailyTransaction {0CE72E59-0AF6-4859-9173-EF563869CBBF}.rpt: Invalid export DLL or export format. "
My code:
ReportDocument cr = new ReportDocument();
DataTable dt = new DataTable();
string strReportPath = string.Empty;
cr.SetDataSource(dt);
cr.Load(strReportPath);
string Fname;
if (!System.IO.File.Exists(strReportPath))
throw (new Exception("Unable to locate report file:\n" + strReportPath));
CrystalReportViewer1.ReportSource = cr;
Fname = Request.PhysicalApplicationPath.ToString() + Session.SessionID.ToString() + ".rpt";
cr.Export();
The sample has Delphi example, it would be good if there is a C#/VB sample available.
Thanks. -
How to get itunes downloaded on my computer. The Download button doesn't work for me.
I seem to be unable to download the latest version of itunes. What can I do to fix this?
I've been trying to organize all my music, making
sure artist and album are filled in, everything
spelled correctly. I'm not able to change some
things because iTunes can't locate the file on my
computer. So is there a way for iTunes to search my
entire computer for every music file and import
everything it finds? This would make my life so much
easier since I have music scattered all over in
places I can't even remember.
Under Advanced menu click on Consolidate library...
I'm trying to add album artwork as well. How come
some say "Album Artwork Not Modifiable"?
Is there a way to make it so if I delete a song from
iTunes, it goes to the Recycle Bin? I have a lot of
duplicates. I don't want them taking up space on my
computer.
IF you delete it from Music (eg library) it goes to recycle bin (iTunes asks you if you want this...). YOu still have to empty the Recyle Bin to have it be totally gone. -
The add-on manager's menu button doesn't work for me.
Try pressing it in the Firefox menu, no dice. Going into Options, and finding 'manage add-ons' in there works, but opens a new window. I usually drag the only tab of this new window into the existing window to work, but the issue stands.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Can apple fix my Ipod ?
probably not because it is cracked, mine started separating at the top for no reason, not one crack or scratch anywhere just separting and opening up, I mailed it in to apple and they sent it back saying because we opened it up that voided the warranty. I sent it in because it opened up, duh, fought with them for a week on the phone, they sent me a coupon for a discount of a new ipod woo hoo, I will not by another apple product ever.
-
Windows exit button doesn't work
Hi,
Does anybody know why the windows' red exit button doesn't work for my program?
ThanksHamed_47 wrote:
The close button is set to be in the menu, so I it's not in tle list of this close control.
Sorry, I did not understand what you mean.
The ring control lists all the controls you have on the panel, and usually there is a QUIT ot EXIT button. You may want to select this one.
What this ring control does is equivalent to setting the ATTR_CLOSE_CTRL programmatically, i.e. you define the ID of the control for which a commit event is generated when you select the Close item in the Windows system menu. -
A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!
I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...
Maybe you are looking for
-
Editing same project on two computers
Sorry if this is elementary but I would appreciate advice. I am cutting a project on my desktop. I did about 25% of it. I then transferred the project (all the files) to my laptop and cut some more when I was out of town. I did some new voice over on
-
How can you connect to MS SQL Server through Oracle 9i?
i.e. we want to connect through a stored procedure and NOT a form. Our live DB is still in 9i.
-
Command line to create a group
Hi, I would like to create a group using command line. But the weblogic document states that only mbeans under weblogic.management.configuration and weblogic.management.runtime can be used in weblogic.Admin command line. Is there a way to use comand
-
The title says it all. I went into settings>general to change the side switch from muting to locking rotation but there was no such feature yet I used to have it before.
-
Deploy Crystal Reports 2008, VS2008, Windows Server 2008
Hi All, I'm looking for guidance on how to deploy a web application developed on VS2008 - I've installed Crystal Reports 2008 (trial version). So in affect crystal reports is integrated in the web app. So now I want to deploy to our web server to com