Middle-click for pasting not working

I'm not too sure what the problem is, but here's my setup:
I've got X installed, with a minimal .xinitrc for wmii (following https://wiki.archlinux.org/index.php/Wmii)
Right now, it's really just
until wmii; do
true
done
I've got the following in /etc/X11/xorg.conf:
Section "InputClass"
Identifier "mouse"
MatchIsPointer "on"
Option "Emulate3Buttons" "true"
EndSection
in order to simulate the middle button (my laptop only has 2 buttons).
I've also got gvim (following the advice from https://bbs.archlinux.org/viewtopic.php?id=124842&p=1) installed. At best, I expect that middle-click pasting should work between different tabs of firefox, but even that doesnt work?

It could either need cleaning or a a software reload.
http://supportforums.blackberry.com/rim/board/mess​age?board.id=8300&message.id=1836&query.id=66098#M​...
I found the above article by searching  in the top left "Trackball Cleaning"
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Similar Messages

  • Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page...

    Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..

    [BUG FIXED, see "EDIT 2" at the end of my post]
    I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
    Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
    I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
    I hope this helps!
    EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
    https://github.com/greasemonkey/greasemonkey/issues/1406
    EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful!

  • My mouse can not click to anything left, right or the middle mouse button does not work

    I am using a 24 inch imac and the problem is suddenly my mouse can not click to anything left, right or the middle mouse button does not work i can see cursor moving and i can use the features of the keyboard but my mouse dies. I tried to plug in another mouse magic trackpad and my tablet but each has the same problem. I can not click to anything but cursor is moving and computer is not frozen. I have to shut it off from the power button when this happens. Do you have any idea what can cause this and how can i fix this?

    Reset the SMC 2-3 times. Click Intel iMac SMC and PRAM resets for instructions.

  • Why does the "fix" for firefox copying and pasting not work?

    I did the fix a few times and restarted firefox, with no success. Also, I installed the latest version of firefox and it is slower now. I have to use firefox for school, otherwise I would just find another way.

    In what way is Firefox slow?
    Is this all the time or only with loading web pages?
    What kind of fix do you mean with: ''Why does the "fix" for firefox copying and pasting not work'' ?

  • Problems with compressing  files with right hand click. it does not work.

    Problems with compressing files with right hand click.
    I am using the compress function in the Mac OS (File > Compress XX) from time to time. Today it does not work anymore. OS 10.5.6
    I get a message: The content list cannot be created for compressing.
    I tried it with files and folders and keep getting this message. Anybody any idea as to how to fix this

    Thanks I love my macbook!!!!
    I also got further problems such as copy-paste not working etc.
    so I fixed it just this morning by running Applejack 1.5 and am back up running noticing your post.
    thanks for helping though!

  • Middle-click on Link not opening new tab

    Yesterday Middle-click on Link stopped working to open a link in a new tab (or close a tab if I Middle-click on the tab).
    V. 27.0 (Auto updates turned on)
    Window 7, 64 Bit, Home Edition
    Was running no add-ons outside extensions for Java, SilverLight, and Adobe and Wacom, and Norton (Disabled as of about 2 months ago)
    I HAVE tried starting in FireFox Safe mode with all add ons disabled, problem still persisted.
    I uninstalled Firefox, cleared my preferences, and reinstalled, same issue.
    I have check the configuration files (I found the command for it in other help topics) and the command line for it is Enabled (I disabled and enabled it again just to check).
    Under options, I have it also set to open new windows, as a tab
    The ONLY thing that I had done that could have changed anything, was I ran Mal-ware Bytes, and Spybot S&D, before the problem started. However I have run both programs in the past and they have never caused this issue to start after a scan.

    My middle click stops working if I show the menu bar. Middle click works as expected if the menu bar is off and just the Firefox button is at the top. Windows 8.1 and Firefox 28.
    Hope this helps

  • I-pod nano click wheel does not work help!

    Hi,
    My i-pod nano 1st gen click wheel will not work i have tried restoring,restarting and all the 5 r's but still nothing has happened... there has to be a solution out there somewhere o yea i have also tried taking out the gunk in the click wheel but nothing HELP!

    Version in the nano is 1.1; iTunes is 6.0.4.2.
    This silly thing "healed itself" the next morning (?!), worked fine for two days, and decided to show the same symptoms this evening, then began working fine again.
    Whether it is working or not I can feel the click of the wheel but unit shows no response when the problem is manifesting. So if I am having the problem I can press the wheel any which way for as long as I like and nothing happens -- screen does not light up, unit doesn't scroll, play/pause gives no response, etc.
    HP laptop Windows XP

  • My ipod nano click wheel will not work - Ipod works when docked on mobile speakers from remote control

    My ipos Nano click wheel will not work, however when it is docked on mobile speakers it will work from the remote control.

    If it continues to malfunction after a restore, it's probably bad hardware.
    I'd recommend making a Genius Bar appointment. They'll probably give you a couple options: Replace it with an identical model for a discounted price, or trade it in for recycling and get 10% off a new iPod.

  • 20GB click wheel iPod not working- or showing up on computer

    My wife's late-2003 20GB click wheel is not working or appearing on either of our Mac computers (either in iTunes or Disk Utility) when attached.
    It's making a rather worrying sound (as if trying to engage a hard drive maybe?) and will briefly flash the Exclamation Point/Folder icon, then say Disk Mode and a checkmark and ready to disconnect.
    Since it's impossible to find the iPod Updater software how do I restore this iPod- or even just get it out of disk mode? I've tried resetting it and had it plugged into a wall outlet for a day or so to make sure it wasn't a dead battery... any thoughts?
    It had been working fine (and regularly connected to the computer to update).

    You could try to format the iPod in Windows. It does the same thing as restoring and you would need to restore the iPod as normal (using the iPod updater) afterward. This can work when the iPod is recognized by the computer, but not by the updater.
    First, put the iPod into forced disk mode.
    See: How to put the iPod into disk mode.
    On your PC, go "my computer" and right click on the iPod, then choose "format". Ensure the settings are at "default" and that "quick format" is not checked. Now select "format". When that's finished, restore the iPod using the updater.

  • Lenovo wireless mouse middle scroll button does not work

    lenovo bluetooth wire mouse works fine with click buttons but the middle scroll wheel does not work. scrolling with the wheel should move the browser screen up and down and it does not.
    click buttons work fine just the scroll wheel in the middle of the mouse

    I tried this setting (adding Firefox as an exception) and it had no effect :-(
    Mouse wheel still does not work with Firefox (but works with everything else).

  • Click to call not working with Firefox 31 in Windo...

    Hello All,
    I have a problem with Click to Call in my new computer.
    Windows 8.1
    Skype 6.20.0.104
    Click to call 7.3.16540.9015
    Firefox 31
    Click to Call not working with Firefox.
    With IE11 it ok.
    When I directly copy the URL "skype:+48xxxxxxxxx?call"  into address field of my Firefox, then automatically opening Skype with only 1 window- contacts, but not opened window with call phone, and not started to call.
    When I do this same in IE11 , Skype opened 2 windows ( contacts and call phone) and start call to phone number.
    I don't know why. because in my second computer ( this same Firefox, Skype, click to call) but Windows 7, Click to Call working with Firefox.
    Please help me.
    Maybe someone have a solution ?
    Best Regards
    Jarek
    ps. Sorry for my english

    Sounds that you have installed a Firefox Beta release and thus are on the beta update channel, see Help > About.<br />
    The Beta update channel receives an update twice a week.
    You need to install the current release to switch the update channel to release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 27: http://www.mozilla.org/en-US/firefox/all.html
    If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.

  • Save for web not working in Photoshop element 6

    Save for web not working in Photoshop element 6. I am using Mac os x version 10.5.8   Anyone know how to fix that please tell me. Thanks

    I just copy the preferences from my computer for you to see what are shown about adobe
    file:///Users/raymondsmith/Library/Preferences/Adobe/
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Illustrator%20CS2%20Settings/
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Paths
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Settings/
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Paths
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Settings /
    file:///Users/raymondsmith/Library/Preferences/AdobeUM/
    file:///Users/raymondsmith/Library/Preferences/AppleWorks/
    file:///Users/raymondsmith/Library/Preferences/ByHost/
    file:///Users/raymondsmith/Library/Preferences/CD%20Info.cidb
    file:///Users/raymondsmith/Library/Preferences/CDDB%20Preferences
    file:///Users/raymondsmith/Library/Preferences/cfx%23FBSxPfw
    file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.90.sh.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Pro7.0.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.sh.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Uninstaller.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Adobe%20Help%20Viewer.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.ami.installer.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.bridge2.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.mediabrowser.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.PhotoshopElements.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader_ppc_9.0.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader.plist
    file:///Users/raymondsmith/Library/Preferences/com.aol.aim.plist

  • [svn:fx-trunk] 13257: Fix for @inheritDoc not working on a setter, but works on a getter

    Revision: 13257
    Revision: 13257
    Author:   [email protected]
    Date:     2010-01-04 10:49:13 -0800 (Mon, 04 Jan 2010)
    Log Message:
    Fix for @inheritDoc not working on a setter, but works on a getter
    QE notes: None.
    Doc notes: None
    Bugs: SDK-24727
    Reviewed By: Paul
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24727
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java

    steabert wrote:
    Hi,
    I had a similar problem with my Dell Latitude E4310, and apparently also the E6410, E6510.
    The solution for me was to add the following line to /etc/modprobe.d/modprobe.conf:
    options snd-hda-intel model=dell-s14
    I tried that, unfortunately it does not work with this chipset. I do get a different set of channels though but it still cannot record anything. Maybe this chipset is too "new" for alsa. The latest release dates back from the end of January. Support for it is explicitly stated in the changelog to 1.0.24 but perhaps the recording part of it slipped through the cracks. ALSA bug tracking system seems quite closed.

  • Click wheel is not working

    My click wheel is not working, but the menu, play/pause, arrows and select (center) buttons are working. I've done everything this website says to correct, and it's not working. Can anyone help?? I use this Ipod at work, and I am in deep trouble if I don't have a working one right now.

    I've done everything this website says to correct, and it's not working.
    Then it's time to call iPod tech support - U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273) or try some of the suggestions mentioned in the iPod Nano 5th Gen. User Manual (direct PDF download)

  • The click wheel is not working

    my click wheel is not working, i cannot select my music because i cant change it..... can you guys help me !!!!!!!!!!

    hey and whops about dropping your ipod...
    heres what i think but im not an ipod know it all so what i say might not help but any way...
    And it connected and updated and everything was okay, instead of the Click wheel control!
    well this sound okay so it probly isnt anything to do with the hard drive if it is updating ect...
    I think it would have to do with the fact that the hold lock was on... have you tried jigling the hold switch back and forward a bit? that often helps...other wise i think you should take it to an apple store and see what they can do.
    Hope it fixes

Maybe you are looking for