Middle click sometimes not working

Sometimes, the middle click does not work. It has just started happening. I open up xev and spam middle click and it shows up for a while, and then stops showing up. It keeps on repeating this pattern.

https://wiki.archlinux.org/index.php/Ge … se_buttons

Similar Messages

  • Middle click emulation not working.

    Hi,
    middle click emulation got turned off in a recent update and I don't seem to be able to turn it back on.
    I put this:
    Section "InputClass"
    Identifier "middle button emulation class"
    MatchIsPointer "on"
    Option "Emulate3Buttons" "on"
    EndSection
    in my xorg.conf.
    Now middle click emu works on my usb mouse (that already has a middle button) but not on the touchpad buttons. The touchpad emu used to work.
    I am not using synaptics. I hope I don't have to use it as I have had nothing but trouble from it in the past.

    I have been experiencing something similar recently, except that Xorg.0.log or dmesg don't show anything - and it works on and off, every few boots it will get disabled again. Don't have a clue

  • Right-click funcionality not working in assessment mode. I NEED HELP!

    Hi - I've recently created a number of assessment recordings. The right-click function works as I'm recording as well as when preview the project and then after I publish it. However, when I give it to a colleague(s) to demo it, for some reason the assessment isn't recognizing her right-click and she gets stuck. We're both running the same IE, flash and windows versions so I am really a at a loss on this one. Has anyone ever encountered the same problem and if so what did you do to fix it?! Thanks a million!

    Check this out.
    http://blogs.adobe.com/captivate/2009/01/adding_rightclick_in_captivate.html
    somewhere towards the middle of the page @Mike says the following. Hope this helps
    quote
    Now when you run the movie in your browser, Right-Click is not  working...
    off course it will not work, as Right-Click uses Flash External  Interface, and this new path
    is not a trusted path by your flash player
    Solution : You need to add this new path to your Flash Player  security
    Scenario 2: You just shared your right-click movie folder over  the network ,
    say the new path for other users is   "\\your-machine-name\My-Right-Click-Movie"
    ( or "\\nework-machine-02\work\captivate-movies\My-Rihgt-Click" )
    and other users are complaining that , Right-Click is not  working...
    Yes once again the reason is same  and new path   "\\your-machine-name\My-Right-Click-Movie"
    ( or "\\nework-machine-02\work\captivate-movies\My-Rihgt-Click" )   in not a trusted path by
    other user's flash player
    Solution : other user need to add this path  "\\your-machine-name\My-Right-Click-Movie"
    into his Flash player security setting.
    How to add a path to flash player security setting?
    Check this URL :
    http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l
    unquote

  • Sometime not work = Word Substitution

    10.2.0.415
    BlackBerry 10 os
    please help,
    i use thats version at Q5 BB but i get orror at :
    Prediction and Correction > Word Substitution >
    I cannot use this service, sometimes ok/normal, sometimes not work, its very important to me,
    Thats only my reson why i buy Q5 BB please Help,
    i have much word to explain to my friend, and with that function will help me, and make my finger easy and very health.
    Thank you very much

    yoyongsc wrote:
    Mine doesn't work in all applications, bbm, text, email, etc.
    Verry odd! My Word Sub works well in all of those you've listed.
    It does not work in commenting on BBM group pictures and in some BBM Channel comments... works every where else.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My left click does not work on my track pad on my macbook pro 13 inch, is there a fix

    my left click does not work on my track pad on my macbook pro 13 inch, is there a fix

    I recommend you to run Apple Hardware Test > http://support.apple.com/kb/ht1509 It's possible that something is damaged, and Apple Hardware Test will help you finding it. Make sure you tick the option to run an extended test, and connect your Mac to the charger.
    If your Mac came with DVDs, you have to insert the Mac OS X DVD to run Apple Hardware Test. As you haven't got the SuperDrive, you will have to buy an external optical drive

  • [LAVA Cross Post] CTRL+SHIFT+ Shortcuts sometimes not working in LabVIEW

    Cross-post from LAVA: http://lavag.org/topic/15619-ctrlshift-shortcuts-sometimes-not-working-in-labview/
    See the above post for more information - here's a synopsis:
    CTRL+SHIFT modifiers are not working while running LabVIEW in a Parallels 7 virtual machine. This problem affects both LV2011 and LV2012. I'm not certain that this is a LabVIEW bug - could be an issue with my virtual machine environment or it's configuration - except that CTRL+SHIFT modifiers work in other applications on the affected VMs. It's just LabVIEW that appears to ignore shortcuts with the CTRL+SHIFT modifiers.
    Any ideas? 
    a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

    X. wrote:
    Still well and alive in Parallels 9 and LabVIEW 2013 SP1. Of course I could upgrade to the latest versions to check whether things have gotten any better.
    Any news on that?
    @mellroth figured out the solution :-)
    a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

  • Right click is not working in Web dynpro explorer

    Hi All,
    I have SAP net weaver developer studio 2.0.9.
    when i right click on web dynpro components, to create a component, the context  menu is not coming, right click is not working.
    though right click works fine in diagram view and outline view.
    Please suggest what might have happened? and how to get back the settings.
    Cheers,
    Srini.

    Hello Srinivas,
    Try closing and opening NWDS. If you still see the same problem, simple solution for this is, Just Change Workspace to new folder.
    Changing workspace - Window -> Workbench -> workspace -> give new path.
    Close nwds and open it again. It should solve the problem.
    Thanks,
    Sridhar

  • My right click is not working. the context menu does not come up and i can no longer drag files/folders. I have checked the mouse and track pad in system preferences and the correct boxes are all checked (with a support member). Please can you help

    My right click is not working and producing the context menu or ability to drag files and folders. I just spoke with a phone support person and we checked that all the mouse/trackpad options for right click were correct and checked.
    Please can you help with this.
    It has only just happened in the last few days.
    Many thanks

    You might want to update your profile so that we can see what model iMac you have and what version of OSX you're running.
    For this question, it might help to know if you're dealing with a trackpad, Magic Mouse, or something else?
    (Until your issue's resolved, you can Control-Left Click to get the right click functionality).

  • Right click problem: I did not know about the Yahoo sidebar issue, I have removed all toolbars from my browser from 'view' menu. There is nothing in my 'extensions' to disable. Right click is not working. What to do?

    Right clicking is not working on any of the websites. I read up that it's a Yahoo sidebar issue. But, in my extentions, Yahoo sidebar is not there. I had removed all toolbars, but from 'view' menu. Now how do I get my right click to work?
    == This happened ==
    Every time Firefox opened
    == I've noticed it on 1 Aug 2010

    This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
    Unfortunately no one here can access your support history. You must respond to the emails directly.

  • I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?

    I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?

    Settings>General>Accessibility>(scroll down to)AssitiveTouch and change to Off

  • In "Show more Bookmarks" if I right click does not work (I want to open in a new tab)

    This is using Mac Firefox current version. I use lots of tabs and don't have space for all of them so there is a >> at the right end for clicking and displaying the rest of them. If I click and display list and highlight one of them, the right click does not work - I want to open in a new tab not use the existing - there are no menu options displayed on these tabs. The tabs across the top work fine for this

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem.

    The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Control-clicking does not work in Finder

    Ever since installing the 10.4.5 update, control-clicking does not work in Finder. When I try to do it, Finder automatically restarts itself. This happens in any Finder window and on the desktop itself. Whether I am control-clicking an Application icon or trying to 'Get Info' on a file, Finder restarts itself. I repaired permissions and it did not fix the problem.
    Any idea on how to fix this? Thanks a lot!
    David
    Edit: Nevermind. I fixed it by deleting the JIMZip.plugin file in my Contexual Menu folder. I found the answer in another thread. I apologize for searching after I created this thread.

    David,
    Can you identify any corrupted or incompatible files in either your Macintosh HD/Library/Contextual Menu Items folder, or your Macintosh HD/Users/yourhomefolder/Library/Contextual Menu Items folder?
    If so you may be able to uninstall/reinstall the associated application.
    You may also consider temporary manual removal and isolation of the suspect file to verify CM functionality.
    ;~)

  • Hotspot Click is not working !!

    Hi,
    I have sucessfully implemented hotspot click using OOALV.
    I still have an issue in one of the hotspot click feature.
    I have a OOALV report where i have implemented hotspot click for Contract # as
    when 'KONNR'.
            if w_listdata-konnr <> ''.
              lv_konn = w_listdata-konnr.
              set parameter id 'VRT' field lv_konn.
              CALL TRANSACTION 'ME33K' and skip first screen.      
            endif.
    since ME33K transaction takes input of type 'EVRTN' ,i have taken a
    temporary parameter called lv_konn declared it as type EVRTN.
    But still the hotspot click is not working.
    Can anyone suggest me how to reslove this issue.
    Appreciate all the help.

    Hi Madan,
                  I will send a syntax for that check it once then ur problem is solved ok..
    FORM usercommand USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
      CASE selfield-sel_tab_field.
        WHEN 'GT_HEADERDAT-EBELN'.
              code
          endcase.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
      I_INTERFACE_CHECK              = ' '
      I_BYPASSING_BUFFER             =
      I_BUFFER_ACTIVE                = ' '
        i_callback_program             = sy-cprog
      I_CALLBACK_PF_STATUS_SET       = ' '
        i_callback_user_command        = 'USERCOMMAND'
      I_STRUCTURE_NAME               =
        is_layout                      = wa_layout
        it_fieldcat                    = gt_fieldcat
      IT_EXCLUDING                   =
      IT_SPECIAL_GROUPS              =
      IT_SORT                        =
      IT_FILTER                      =
      IS_SEL_HIDE                    =
      I_DEFAULT                      = 'X'
      I_SAVE                         = ' '
      IS_VARIANT                     =
        it_events                      = gt_events
      IT_EVENT_EXIT                  =
      IS_PRINT                       =
      IS_REPREP_ID                   =
      I_SCREEN_START_COLUMN          = 0
      I_SCREEN_START_LINE            = 0
      I_SCREEN_END_COLUMN            = 0
      I_SCREEN_END_LINE              = 0
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER        =
      ES_EXIT_CAUSED_BY_USER         =
        TABLES
        t_outtab                       = gt_headerdat
       EXCEPTIONS
        program_error                  = 1
        OTHERS                         = 2.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Award points if helpful.
    Kiran Kumar.G.A
            Have a Nice Day..

  • Mark debug 'sometimes' not working

    I find mark debug sometimes not working.In my new project ,I add mark debug = true, then set up the debug nets.I can't find them in the assigned nets ,but from the netlists I find some of them.The missing nets are wire type,notregister type.Does the command not work on wire type nets?
    Because my project is very large, searching for the nets requires a very long time.So I hope Xilinx can fix this bug.

    Rather than open another thread, I'll extend this one since I'm having what I think is the same problem.
    I'm using Vivado 2014.4.  "Flatten" is set to "None".  The nets are set in the elaborated design with MARK_DEBUG and DONT_TOUCH.  But when synthesis gets done with them, the names are completely different.
    I don't care if the "equivalent" nets are still there.  I need the names.  Every time synthesis runs, it's a crapshoot whether the names will change.  Particularly bad are 500+ bit buses that get exploded into individual signals.  I don't have the time to regather them into the proper buses every time.
    In general, I've been pleased with the changes in Viviado.  But I can't believe how badly a wonderful tool like ChipScope has been screwed up.
     

Maybe you are looking for