Middleware Adapter objects

Hi experts,
i am working on CRM 5.0. i need to create a customized business Adapter (for replicating relationships)object to download a custom table from R/3 to CRM (Z table replication).But i am unable to create Business object in CRM.(Where as, there is an option to create a customizing object).ls there any way to do this?
Points will be rewarded.
Thanks in advance.
Edited by: kiran on Dec 19, 2007 3:03 PM

Dear RK,
The transaction R3AC1 you can not create the adaptor object. However you can classify the adaptor object created in R3AC3 such as that it will appear in transaction R3AC1.
As in your case you want to pull BP Relationship using some Ztable.
Create Your Adaptor object in R3AC3 and give link Bdoc as BUPA_REL and the table and field also use mapping module.
When you save it, you can see it in R3AC1.
Hope this will help.
Regards
Ashutosh Asthana
"Please reward with points ,if found helpful."

Similar Messages

Block size in middleware adapter object

Hi
Am trying to download customers from ECC to CRM.
If the block size is set to 1 in CUSTOMER_MAIN adapter object, and if i download a request (R3AR4) with a range of 20,000 (say 1,00,000 to 1,20,000) this request gets downloaded fine. The same happens for block size 3.
But if i try with block size 100 and increase the range to 20,000+ , the CRM system comes down. It gets into an infinite loop i think. Then i require to restart the CRM system.
Has anyone come across such a situation or someone can suggest whats going wrong?
Thanks for your help in anticipation.
Karthik

Hi,
Did you try with the block size of 1000? This is the standard value. Give a try
Do not forget to reward if it helps,
Thanks,
Paul Kondaveeti

Middleware and Adapter Object help needed

Hi all,
We are trying to replicate business agreements from CRM to contract accounts in our R/3 IS-U system. We've followed the various cookbooks and guidelines but have so far been unsuccessful. For object BUAG_MAIN, is an adapter object needed? If so, we are unable to find one in R3AC1.
If we check the BDoc message, we are getting two Technical errors after creating the business agreement:
1. "Outbound call for BDoc type BUAG_MAIN to adapter module CRM_UPLOAD_TO_OLTP failed."
2. "Service that caused the error: SMW3_OUTBOUNDADP_CALLADAPTERS"
Any ideas? Points will be awarded for helpful responses. Thanks in advance.
Message was edited by:
John S

So in R3AC1 there is a button to show inactive adapter objects. Hitting this showed BUAG_MAIN. After that, we opened BUAG_MAIN and activated the object. This resulted in a couple of changes that we clicked through. We then were able to do an initial load of the business agreements and replications of newly created ones happened thereafter.

Adapter Object

Hi Experts,
I am new to CRM Middleware. Please help me in knowing the difference between customizing adapter object and Business adapter object?

Hello,
Customizing object are meant to get the customizing data from R/3 to CRM.
You can check the customizing objects in txn:R3AC3.
Business objects are meant to get the actual data(master data as well as transaction data) from R/3 to CRM.
You can check them in txn:R3AC1.
For eg:
You want to download materials from R/3 to CRM.
But in order to get the materials to CRM first, you need to make sure that necessary customizng has been maintained(or downloaded from R/3) like material numbering scheme, numbering settings and hierarchy data etc.
Once this is downloaded then only materials can be downloaded from R/3 to CRM using the Business Object which is
MATERIAL in this case.
If you check the Business Object in txn:R3AC1, then you can see under Parent Object tab that customizing objects are maintained.Which means that customizing object has to be downloaded before performing business object download.
Hope this clarifies your doubt.
Best Regards,
Shanthala Kudva.

MIDDLEWARE-LOAD OBJECTS

Hi Experts
Is there any Table or Transaction code which shows the details of the Load objects( Ex: BUPA_MAIN), and the Bdocs related to that load object.
Points will be rewarded.
Thanks in advance
Nadh.

Hi Nadh,
Below are the list of the Tcodes that will give you the status of the middleware Load objects.
SMWP (Monitoring Cockpit)
SMW00 (Error Handler)
SMW01 (Display BDoc Messages)
SMW02 (BDoc Message Summary)
SMQ1 (Outbound Queue Monitor)
SMQ2 (Inbound Queue Monitor)
SMQR (Queue-In Scheduler)
SMQS (Queue-Out Scheduler)
SMWT (Middleware Trace)
R3AS (Start Initial Load)
R3AC6 (Define Middleware Parameters)
R3AR2 (Define Requests)
R3AR3 (Monitor Requests)
R3AR4 (Start Requests)
 SDIMA (Data Integrity Manager)
SBDM (BDoc Modeler)
R3AC1 (Adapter Business Objects)
Let me know if you need any more details.
Thanks,
Samantak.
Rewards points for useful answers.

Middleware Initial Objects Details

Hi Gurus,
I am new to the Middleware i would like to know the details of the following initial objects i.e what is the purpose of each initial objects and it's impact.
DNL_CUST_ACGRPP
DNL_CUST_ADDR
DNL_CUST_BASIS
DNL_CUST_BASIS2
DNL_CUST_BASIS3
DNL_CUST_BASIS5
DNL_CUST_BASIS6
DNL_CUST_BNKA
DNL_CUST_PAYPL
DNL_CUST_PRICE
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_PROD3
DNL_CUST_S_AREA
DNL_CUST_SALES
DNL_CUST_SCE
DNL_CUST_SHIP
DNL_CUST_SPROD
DNL_CUST_T502T
DNL_CUST_TBRC
DNL_CUST_TPFK
DNL_CUST_TSAB
DNL_CUST_TVAST
DNL_CUST_TVFS
DNL_CUST_TVGF
DNL_CUST_TVIP
DNL_CUST_TVLS
DNL_CUST_TVPV
Thanks in advance
I would reward the maximum points if that helps me out

Hi,
Although its lengthy to discuss the importance of each of the objects you mentioned,Material master data is transferred from the ERP system to the CRM system using middleware. The relevant middleware object is MATERIAL. A single initial download is necessary in which the materials required are created in the CRM system as products. Subsequent changes (and also new materials) in the ERP system can be transferred by delta downloads.Therefore
DNL_CUST_PROD1 (is an adapter object to create hierarchies and categories in CRM to hold the product master), DNL_CUST_PROD3, DNL_CUST_PROD0,
Before you do an initial load from R/3.Before the initial download can take place, you must have:
●     Transferred Customizing for Basis Components (in particular, transferred the units of measure, languages, and countries)
●     Transferred Customizing for Organizational Management (for example, transferred the sales offices)
●     Transferred Customizing for Sales and Distribution (for example, transferred the product groups)
The others will take time to elaborate,
Hope this helps you to a certain extent.

How to get the connected Adapter Object for a particular BDoc Type?

Hi All,
I have a scenario in which CRM system is connected to ERP system.
In SMW01 transaction, I can see one BDoc with BUS_TRANS_MSG as the BDoc Type in CRM.
Now, how do I get to know if this one BDoc is a SALESDOCUMENT or SALESCONTRACT.
Is there any way thorough which I can get to know the Adapter Object for this particular BDoc.
Regards,
Madhuri

Hi Madhuri,
Happy new year.
In Transaction : R3AC1.
You can observe the Linked BDOC for the adaptor objects. For example Sales docuemnt and Sales contrcat will have the same linked BDOC as "BUS_TRANS_MSG".
If you see an error in SMW01, you want to find whether it is salesdocument or contract.
1. Please take the Queue name from SMW01.
from the queue name you can find whether it is sales contract or sales document.
Queue name is customized in tables: SMOFQFIND.
I hope this helps you.
regards,
Sri...

How to debug mapping module of a Adapter Object

I have created an Adapter object which will send data from ECC table to CRM. In the Table/Structure tab, I have mentioned the ECC table name for which data will come.
A FM is created to convert data and is mapped in Mapping Module of the object.Now though initial load is running sucessfully, table entry is not inserted in CRM table.
Though I have given breakpoint in the FM, it is not triggering. Is there any way out to debug the FM.

Hi,
Can you let me know the download status of your adapter object using txn. R3AM1? If it is DONE, you can trigger another initial load.
The inbound queue formation on CRM is governed by USE_IN_QUEUE field of table CRMRFCPAR on the ECC for your adapter object. It should be set to X. So in case there's a specific entry for your adapter object in CRMRFCPAR, just check it.
If this setting is already maintained you should see a queue name like R3AI_<objectName> in SMQ2 of CRM. Of course you'd need to deregister the R3AI* queue in txn. SMQR.
Thanks,
Rohit

What is the use of Adapter objects in I.R

what is the use of Adapter objects in I.R

congratulations you successfully opened 1000 new threads...
adapters are components of the adapter engine, their main action is to connect different sysems with each other. therefore are different adapters:
SAP-2-SAP Adapters: like IDoc and RFC
SAP-2-NOT-SAP-ADapters: like JMS, JDBC, HTTP..
and B2B Adapters...
there are some rules in any board that you should accept:
use search first
use the sap help http://help.sap.com/
and read the forum rules
regards cc

Adapter object for table smorelation

hi experts,
do you know the use of table smorelation? i can not see any data in that table in crm.
is it used by BP hierarchy? if yes then which adapter object to be used to download data in this table?
any help will be reqrded.
thanks,
sagar.

Hi Prabhu,
Suppose customer specific (Y & Z) Transaction/Sales-Document types and customer specific item categories are created in CRM or ECC. These cannot be downloaded via any(initial, delta n synchronization) of the downloads. We have to do this manually as there is no standard adapter object available for these.
So as the item category determination. It should be done manually.
In ECC Item category determination, we need sales document type (say ZOR) and item category (say ZTAN). These will not be replicated or downloaded to CRM.
So we need to create them manually in CRM and also the item category determination should be done manually.
If any sales-document-type / Transaction-Type or item category is created newly in ECC/CRM in production environment, item category determination should be done manually in ECC and CRM for those newly created ones after creating them in CRM and ECC.
Pls don't forget to reward points if it helps
Vikas

What is Adapter Metadata in Adapter Objects

Hi All,
Q1) What is Adapter Metadata in Adapter Objects in IR ??
Q2) What is Communication Channel Template ???
Wxplain me the Purposes
Regards
Vamsi

Hi Vamsi,
excuse me for my delayed reply.
We can use Integration Scenario from Integration Repository as a template for generating configuration Objects. It takes you through the configuration process, step-by-step. The objects required for the configuration are created and existing objects are checked to ensure that they can be used before including them in a scenario. The relevant objects are predominantly created automatically. The whole process is logged so that you have a good overview and can analyze and understand the configuration.
So Integration Scenario helps you to generate Configuration objects in ID. The configuration wizard that is already there is different might be both the intensions are same.
>>Here I am Saying We can have all those If we Use Configuration Wizard
yes u are exactly correct
But by importing Integration Scenario from IR you will get Integration Scenario Configurator which will embed all the templates and actions included in IR will be generated.
Hope this time you are clarified.
Regards,
Ramesh P

Error while transfering condition adapter object

In ERP I created new condition table A940 that uses also VKBUR (sales office). On CRM side I did all the steps according to Note 674538 - Copying conditions for sales office VKBUR into CRM.
When I ran object DNL_CUST_CNDALL everything was transfered ok and in CRM condition table CNCCRMPRCUS940 was created succesfully.
Next I created new adapter object to transfer entries of table 940 from ERP to CRM as copy of one of standard objects. But when I run it the load finishes with error in SMQ2 wirh the error Access via 'NULL' object reference not possible.
Any hints?

Hello Robert,
Note 1301829 should solve the issue.
thanks
Willie

Adapter Object Marketing Planner

Hi Forum,
I have an issue with the Marketing planner transfer to R/3 Project systems.
Is there a way to find the Table details of the source and target for an adapter object crm_mktpl_r3int.
I have created the site types, subscription objects and all the customization for integration in both CRM and R3 as well as PS also. But now when I run the initial load it says no table found for data exchange
When I go to r3ac1 and check the adapter object for marketing planner there are no tables defined for the source and destination. I am confused because in R3AC3 there are too many tables for different objects of marketing planner and campaigns.
Is there a way to find the Table details of the source and target for an adapter object crm_mktpl_r3int.
Are the tables cgpl_project (source) and PRPS (target) correct
Regards,
Amit

Hi Raj,
In my opinion these are intermediate table since I checked them and they are still empty. I had already released 4 campaigns so if these were the initial tables to start with then all those 4 campaigns should have been here.
The direction of CRM_MKTPL_R3MAP table is from crm to r3 so it is source table and it shud have those 4 campaigns.
The direction of cgpl_r3_attribut is R/3 to crm so it is the target destination. so it will receive at the r3 end.
On the other hand cgpl_project has all the entries so I have used it as a source and PRPS as target But still the queue is in wait status.
If you have this scenario configured plz check in r3ac1.
Regards,
Amit

Can I copy MATERIAL adapter object and create new business object in R3AC1

Hi experts,
I need to copy MATERIAL adapter object and create a new business object R3AC1.
Please let me know whether this is feasible.
Thanks & Regards,
Keya

Usually when there is a need to change/create an adapter object, I suggest to change object class to CUSTOMIZING in R3AC1. Then save it and call transaction R3AC3. There do necessary changes and afterwards switch back to original object class. There is no copy functionality for adapter objects. Kindly use transaction R3AC3 to create a new adapter object and maintain all tabs according to your requirements. When you are finished, kindly change the object class "CUSTOMIZING" to the original class name you're copying and the new adapter object will be visible in R3AC1.
Documentation can be found in
https://service.sap.com/ce -> Early Product Training > SAP CRM 4.0 & mySAP CRM Edition 2004 .. on the learning map, please choose "Development Consultant" -> Open "Enhance CRM Scenarios"
Here you can find a lot of guides and SAP tutors on how to create an adapter object, example coding, and so on.
To enable Filter Fields for an Adapter object make requisite changes in table SMOFFILFLD and generate the Adapter Object using SMOGGEN. CHeck table CRMPAROLTP in ECC to enable Filtering

Adapter object for Item Category Determination

Hi All,
Could please anyone let me know the adapter object for Synchronizing Item Category determination from R/3 to CRM.
I could get the object for synchronizing the Item category determination from CRM to CDB and it is "CRM_DNL_IT_ASSG'.
Thanks in advance.
Yatin

Hi Prabhu,
Suppose customer specific (Y & Z) Transaction/Sales-Document types and customer specific item categories are created in CRM or ECC. These cannot be downloaded via any(initial, delta n synchronization) of the downloads. We have to do this manually as there is no standard adapter object available for these.
So as the item category determination. It should be done manually.
In ECC Item category determination, we need sales document type (say ZOR) and item category (say ZTAN). These will not be replicated or downloaded to CRM.
So we need to create them manually in CRM and also the item category determination should be done manually.
If any sales-document-type / Transaction-Type or item category is created newly in ECC/CRM in production environment, item category determination should be done manually in ECC and CRM for those newly created ones after creating them in CRM and ECC.
Pls don't forget to reward points if it helps
Vikas

Middleware Adapter objects

Similar Messages

Maybe you are looking for