Middleware config setup in SAP R/3 system.
Hi Guys,
Can you please tell me the implications on the SRM system for the below changes.
There was an issue in the CRM system as some of the Bdocs getting failed in the CRM system, reason being tthe actual scenario is that we have CRM system and SRM system connected to ECC (XXX ) but both the entries have been created with user name CRM. That is the reason you are seeing two instances of RFC connections for CRM which actually is one entry for CRM and other for SRM system.This issue happens intermittantly and does not occur for all the Business partners. We are not sure about the steps to reproduce the issue as it does not happen for all the BP's but occurs intermittantly and we are unsure of the reason for the same.
Finally came to know that its because of the SRM and CRM are connected with the same user name CRM in the CRMRFCPAR.
If I change the settings for SRM as per the SAP note number 720819 what would be the impact on the system and how to handle this. This is a production system.
And Quality and Dev environments are not similar to Production environment.So cannot reproduce the same error.
Regards
Srujan K
Hi Venkat,
I am sorry If I have not given you the clear information, In Quality and Dev the systems the CRM and SRM systems are connected to two different backend systems, But in Production system the same backend is being shared by the CRM and SRM.
So the problem cannot be re-produced thats what I mean to say. Hope you got my point now.
Regards
Srujann K.
Similar Messages
-
LDAP Setup in SAP GRC 10 system
Hello All,
We are implementing SAP GRC 10 and trying to connect GRC with LDAP to sync users but we are facing below error while doing configuration in LDAP t-code
Errro “Could not login to directory “
But it’s working fine when we are trying to login throw ldap.exe to check host and other things.
Please let me know where we I can check the configuration in GRC and LDAP system to correct the same.
Thanks & Regards,
JagatHello,
Please check other configuration screens from GRC and LDAP.exe tool
Screen 1 – LDAP Server
Screen 2 – System User
Screen 3 – LDAP Connector Setting
Screen 4 – LDAP.exe -
Middleware problem -Outbound queue is stuck in SAP R/3 system with message
Hi Middleware gurus ,
We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message STOP .
There are two queues generated in SAP R/3 system with names MASS_CRM_CUSTOME and R3AD_CUSTOME . The status for both the queues is STOP and when go for details it mentions sapsuck ..SAPMSSY1 -Message no. SR 053.
Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
We really dont as to why the Initial load worked fine with 2 BPs and later when want to do more BP Initial Load the Outbound queue is getting stuck
Also , by unlocking the 2nd queue R3AD_CUSTOME we are able to release it , but the first queue MASS_CRM_CUSTOME* is stuck
Please help us urgently
Regards
Dinesh and Ritvij
Email : [email protected]
Mobile -+91=9704933315Hi Praveen and other Middleware gurus,
We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
An RFC link is not maintained in the Middleware
Message no. CRM_BUPA_MAPPING051
We have set the RFC link , but still the problem continues!!!
Please help further..
Regards
Dinesh and Ritvij -
Can SAP R/3 system read a PDF file without XI as middleware?
Hi Experts,
There is a requirement where an SAP R/3 system needs to read contents of a PDF file. The file is supplied to R/3 system from an application server. Is it possible to read contents of a PDF file by a SAP r/3 system without middleware like SAP XI? If possible what might be the general steps of doing that? Secondly is it possible for XI to read contents of a PDF file format which has data in form of CSV within it?
regards
Anupam
Edited by: anupamsap on Feb 16, 2011 1:12 PM>>Secondly is it possible for XI to read contents of a PDF file format
Yes,Write a custom adapter module for sender file adapter.
Use itext libray
http://api.itextpdf.com/
check this blog.(writing to PDF )
http://wiki.sdn.sap.com/wiki/display/XI/CODE%20-%20Create%20a%20PDF%20File%20via%20the%20iText%20Library
you can write the code to read the pdf.
Hope it helps -
UME: SAP R/3 system config
I'm trying to set User authentication to SAP R/3 system, not load balanced system, on the User Management Configuration values: Client=601, Userid=sapjsf, Password=pwd, sys id=s01, Group and Message server= no values, Application server= IP addreess, Sys. number=00, Max pool=10, Max wait=10000.
When testing connection, I got this message:
(System ID): com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: Open file 'sapmsg.ini' failed
(System ID & System Number): OK
now, is this an error? where is and what values are needed at sapmsg.ini file? as our SAP R/3 is not a load balanced system.
Did I miss any item for the setup, in dataSourceConfiguration_r3.xml? I made sure the SAPJSF "communication user" got the right sap role and authorizations,
Portal version : EP6 SP2 PL22
Regards,
AAAttarThanks Tan,
Yes it was Undocumented fun, When leaving SystemId, Group and Message servers blank, I was able to connect, and map the BW WAS6.2 users.
However R/3 4.6C user can not be referenced as an SAP UME for user logon directly, it must have a WAS6.2 or higher,
http://help.sap.com/saphelp_ep60sp2/helpdata/en/9e/fdcf3d4f902d10e10000000a114084/frameset.htm
Regards,
AAAttar -
Getting a runtime error on SAP R/3 System in Portal 6.0 SP6
Hi,
I just installed EP6.0SP6 on WAS6.0SP7 in Windows 2000/SQL2000.
When trying to config "SAP R/3 System" tab by going to System Administration -> System Configuration -> UM Configuration:
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Resource
Component : pcd:portal_content/administrator/system_admin/system_admin_role/com.sap.portal.system_admin_ws/com.sap.portal.system_configuration/com.sap.portal.uMPropertyEditor
Component class : com.sapportals.portal.prt.component.usermanagement.admin.UMPropertyEditorComponent
User : Administrator
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:444)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527)
at com.sapportals.portal.prt.component.AbstractComponentResponse.include(AbstractComponentResponse.java:89)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:232)
at com.sapportals.portal.htmlb.page.JSPDynPage.doOutput(JSPDynPage.java:76)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:109)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:627)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:153)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:337)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:315)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:815)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:238)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:151)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: PortalComponentException
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:124)
at com.sapportals.portal.prt.core.broker.JSPComponentItem.compileJSP(JSPComponentItem.java:250)
at com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:100)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:355)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:931)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
... 38 more
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in executing a process for compilation, D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:3812: code too large for try statement
} catch(IOException _jspioex) {}
^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:88: code too large for try statement
try {
^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:73: code too large for try statement
try {
^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:68: code too large for try statement
try {
^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:3804: code too large for try statement
} catch (ThreadDeath tde) { throw tde;
^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:3805: code too large for try statement
} catch (Throwable t) {
^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:49: code too large for try statement
try {
^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:22: code too large
public void doContent(IPortalComponentRequest componentRequest, IPortalComponentResponse aResponse)
^
8 errors
at com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.launchCompilerProcess(J2eeCompiler_6_30.java:541)
at com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.compileExternal(J2eeCompiler_6_30.java:370)
at com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.compile(J2eeCompiler_6_30.java:649)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:2143)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.compile(JSPCompiler.java:76)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:119)
... 43 more
Any idea? Also, I notice some forum thread that mentions we cannot setup R/3 4.6c connection within Portal. Our user store/CUA is on R/3 4.6c.
Is this true?
Thanks,
EdmondHi Edmond,
it's not the ume, it's the com.sap.portal.usermanagement.admin package.
In order to redeploy it, go to following directory:
<drive>\usr\sap\<SAPSID>\JC<instance number>\j2ee\cluster\server0 \apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
look for the com.sap.portal.usermanagement.admin.par.bak, remove the suffix .bak and restart your engine.
Don't know of this helps, but maybe it's worth a try.
Regards, Karsten -
Portal application connecting backend SAP R/3 system
Hi All,
I am developing one portal application through NWDS. It's JSPDYNPage component.The applications functionality is basicaly is to connect it to backend SAP R/3 system & fetch some data in aparticular table & display that data in a tableview format on one JSP& also when i click any row of the tableview then details of that row should get displayed on the next JSP. So i reached till develpoing a code that connnects to Backend SAP R/3.(Basicaly coding of connection part is done). Now i need to test this code, to check whether it is fine or not? NWDS doesnt give nay error, not compile also or not runtime error also. It simply shows the output as a blank page, where it is supposed to display one line of text in textview(i coded this in my JSP).But as i said it displays a blank page. i tried to debug the application , but debugging also not worked.I performed the debugging twice in right way. The code was not debugged, it run the same way as it normally runs when debugging is off & shown the blank page. I also have done all the the settings or prerequisites for debugging properly. I am stuck at this point now.search many documents , but no relevant help has been received. Can anyonehlep me with this. i am putting below the code for JSP, JSPDYNPAGE component as well as portalapp.xml. Can anyone guide me with this, whhere i am making mistake? what should i change in this?
JSPDYNPAGE code
package com.lti.portal;
//import java.util.ArrayList;
import com.sapportals.htmlb.*;
import com.sapportals.htmlb.enum.*;
import com.sapportals.htmlb.event.*;
import com.sapportals.htmlb.page.*;
import com.sapportals.portal.htmlb.page.*;
import com.sapportals.portal.prt.component.*;
import java.util.ArrayList;
import com.sap.mw.jco.IFunctionTemplate;
import com.sap.mw.jco.JCO;
import com.sun.corba.se.internal.core.Response;
public class Connection_R3 extends PageProcessorComponent {
public DynPage getPage(){
return new Connection_R3DynPage();
public static class Connection_R3DynPage extends JSPDynPage{
private Conn_R3 myBean = null;
public JCO.Client mConnection;
public JCO.Repository mRepository;
public ArrayList al = new ArrayList();
public String output;
public String Ans;
public static String BEAN_KEY="myBean";
public void doInitialization(){
IPortalComponentRequest request =(IPortalComponentRequest) this.getRequest();
IPortalComponentContext context = request.getComponentContext();
IPortalComponentProfile profile = context.getProfile();
//create & initialize the bean.
Conn_R3 test_bean= new Conn_R3();
test_bean.setans("3");
// put the bean into application context.
context.putValue(BEAN_KEY,test_bean);
conn();
//IPortalComponentResponse res = (IPortalComponentResponse)this.getResponse();
//for(int i=0;i<al.size();i++)
//res.write(" "+al.get(i).toString());
public void doProcessAfterInput() throws PageException {
public void doProcessBeforeOutput() throws PageException {
this.setJspName("Connection_R3.jsp");
public ArrayList conn() {
IPortalComponentRequest request =(IPortalComponentRequest) this.getRequest();
IPortalComponentContext context = request.getComponentContext();
IPortalComponentProfile profile = context.getProfile();
Conn_R3 sample_bean = new Conn_R3();
sample_bean.setans("5");
//context.putValue(BEAN_KEY, sample_bean);
//r3-accessing
//connect_to_r3();
try {
// Change the logon information to your own system/user
mConnection = JCO.createClient("800", // SAP client
"********", // userid
"******", // password
null, // language
"*******", // application server host name
"**"); // system number
mConnection.connect();
//System.out.println(mConnection.getAttributes());
mRepository = new JCO.Repository("ABC", mConnection);
} catch (Exception ex) {
ex.printStackTrace();
System.exit(1);
JCO.Function function = null;
JCO.Table codes = null;
try {
function = this.createFunction("ZSAMPLE");
if (function == null) {
System.out.println("ZSAMPLE" + " not found in SAP.");
System.exit(1);
String num1 = "7";
String num2 = "9";
//String ans;
function.getImportParameterList().setValue(num1,"My_import");
function.getImportParameterList().setValue(num2, "My_Import");
mConnection.execute(function);
Object name =function.getExportParameterList().getValue(Ans);
output=name.toString();
sample_bean.setans(output);
//sample_bean.setans(output)
//al.add(name);
//store values into strings
//pushing of values we get from r3 into awt
} catch (Exception ex) {
ex.printStackTrace();
System.exit(1);
disconnect_r3();
return al;
public void connect_to_r3() {
public JCO.Function createFunction(String name) throws Exception {
try {
IFunctionTemplate ft =
mRepository.getFunctionTemplate(name.toUpperCase());
if (ft == null)
return null;
return ft.getFunction();
} catch (Exception ex) {
throw new Exception("Problem retrieving JCO.Function object.");
public void disconnect_r3() {
mConnection.disconnect();
//**********************<b>Code for BEAN</b>****************************
package com.lti.portal;
import java.io.Serializable;
public class Conn_R3 implements Serializable {
public String answer;
public void setans(String a)
answer=a;
public String getans()
return answer;
///////////////////////<b>Code for JSP</b>*****************************
><%@ taglib uri= "tagLib" prefix= "hbj" %>
<jsp:useBean id="myBean" scope="application" class="com.lti.portal.Conn_R3" />
<hbj:content id="myContext" >
<hbj:page title="PageTitle">
<hbj:form id="myFormId" >
<hbj:textView
id="Welcome_message"
text="<%=myBean.getans()%>"
design="STANDARD" >
</hbj:textView>
</hbj:form>
</hbj:page>
</hbj:content>
/////////////////////////////////<b>Portalapp.xml</b>*****************************************
application>
<application-config>
<property name="PrivateSharingReference" value="com.sap.portal.htmlb"/>
</application-config>
<components>
<component name="Address_comp">
<component-config>
<property name="ClassName" value="com.lti.portal.Address_comp"/>
</component-config>
<component-profile>
<property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld"/>
</component-profile>
</component>
</components>
<services/>
</application>Hi,
Do onething, please refer this <a href="http://www.i-barile.it/SDN/JCoTutorial.pdf">JCo Tutorial</a> as well as <a href="http://www.apentia-forum.de/viewtopic.php?t=1962&sid=9ac1506bdb153c14edaf891300bfde25">Link</a> also.
Regards,
Venkatesh. K
/* Points are Welcome */ -
How to extract Inventory data from SAP R/3 system
Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?
Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK -
Implementing UCES in SAP ISU- IDES system
Hi,
We are interested to implement UCES in SAP ISU - IDES system which we have for our internal competency and Customer POCs/Demos. ( ECC 6 with ISU)
Could any body please share their experience or knowledge on this, that would be of very helpfull.
Many Thanks
RajaHi,
There is something called UCES - Biller Direct where is there is an Interaction Between SAP Biller Direct and Contract Accounts Receivable and Payable.
Purpose:You should use SAP Biller Direct if you want to present information about customer accounts in your Internet portal and offer your customers the option of paying bills or of creating inquiries and complaints via the Internet.
Implementation Considerations : Your customer does not need to install any SAP software to be able to use SAP Biller Direct. All functions can be carried out using a standard Web browser.
Information on the necessary system requirements and the browsers supported by SAP Biller Direct can be found in the introductory sections of the installation guide.
SAP Biller Direct consists of an application based on JavaServer Pages. The accounting system runs on a standard application server and is used as the back end for SAP Biller Direct. The transfer of data between the front end and back end is done by RFC and is ensured using the SAP Java Connector (JCO), which you install as part of the SAP middleware.
Award points if this is found useful. -
Dear Experts,
We are getting below error on portal while using the BEX query in BI system.
Error:
BEx Web Application
Error: First RFC call failed, config not loaded. Check the System landscape configuration.
Exception occurred while processing the current request; this exception cannot be handled by the application or framework
Failed to process request; contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page
We are sorry for the inconvenience.
As the ITS & WEB AS connection tests go successful on object created for BI system in portal.
Kindly suggest me on this issue..
Thanks,
Bharath.Hi Bharath,
Please go through the below SAP Note and let me know if this helps.
1903392 - Error: First RFC call failed, config not loaded
BR,
Anurag -
Can SMD be setup to monitor the Managing System?
Hello, We have been working off and on for the last few months
installing Wily Introscope, which in turn required E2E RCA, which in
turn required SMD to be installed. Since virtually all of our systems
are on a relatively low pl of the kernel, 114, we also installed the
latest SP and kernel to our Solution Manager system. So, the SM system
is at 7.00 pl 146, and SPS 16 (it's a dual-stack UNICODE system).
However, every other of our almost 27 ABAP stacks are at pl 114,
unfortunately.
We had read, via SAPNet note 1126859, that the MANAGED system must be
at least at kernel 7.00 pl 121. As I saidl, only our MANAGING SM
system is at that level. So we thought that we'd try to have SM
monitor itself, in the context of SMD and Wily Introscope.
Unfortunately, we got stuck at setting up the trusted RFCs for the SM
system to monitor itself. SAP AG's instructions for setting up the
trusted RFCs is in the following guide: Root Cause Analysis
Installation and Upgrade Guide (v3.30 - July 2008), section
6.3.2 "Setup RFC Destinations to Managed Systems". Transaction SMT1
doesn't permit 2 RFCs with the same target <sid>.
So, our questions:
1. Can a MANAGING system also be a MANAGED system?
2. If so, would you kindly clarify how to configure the RFCs for that
scenario? Or perhaps we don't use RFCs in this scenario?
For now, we will move on and try to setup Wily/SMD for a Java-stack
system we have available (Portal).Hi Felipe Pitta,
The Managing system can be managed, for that include your Solman in a solution and proceed all the needed activities like Agent installation, Wily agent setup etc as you do for the managed systems.
You need to create RFCs to the BI client of the solman if you are the same BI component which is available in Solman (001 is your BI client) or RFCs should be created for the BI system which you are using.
WEBADMIN RFC will be created automatically during SMD Agent installation.
By this your solman's data will be collected.
For furthur clarifications pls revert back
regards
Naveen kumar -
Unable to import idoc into PI 7.0 system from SAP r/3 system
Hi Experts,
I am getting an error while importing an Idoc structure from SAP r/3 system. The error says "unable to read Idoc segments". The Idoc has recently undergone changes. When We are looking at the struture of idoc through IDOCSYN table it is showing updated structure in SAP R/3 system but import to SAP XI is failing.
Can you suggest some way to tackle this kind of problem.
regards
AnupamHi Francis,
This was indeed an authorization issue. Thank you so much for your valuable suggestion. The user lacked proper authorization to import the idocs.
Hi All,
Thank you for all your support.
Regards
Anupam -
Help on accessing table available in SAP R/3 System
Hi All
A day before I had posted a question regarding the accessing of tables available in SAP R/3 system.
I got the following code as reply. This code is working fine.
But in the below example, the QUERY_TABLE IS BSAUTHORS.
In my case, the QUERY_TABLE is VBKD(Sales Document Table).
When I replace the table name with VBKD in place of BSAUTHORS, I am getting the following error:
ERROR BEGIN----
com.sap.mw.jco.JCO$AbapException: (126) DATA_BUFFER_EXCEEDED: Selected fields do not fit into structure DATA
at com.sap.mw.jco.JCO$Function.getException(JCO.java:17978)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3143)
at com.insync.JCO.UpdateSalesOrder.main(UpdateSalesOrder.java:34)
ERROR END----
Can anyone please give me a solution for this?
Thanks in Advace,
Vijay.
**********************Code**********************
import com.sap.mw.jco.*;
public class JcoTest {
private static JCO.Client theConnection;
private static IRepository theRepository;
public static void main(String[] args) {
createConnection();
retrieveRepository();
try {
JCO.Function function = getFunction("RFC_READ_TABLE");
JCO.ParameterList listParams = function.getImportParameterList();
listParams.setValue("BSAUTHORS", "QUERY_TABLE");
//listParams.setValue("VBKD", "QUERY_TABLE"); // ERROR
theConnection.execute(function);
JCO.Table tableList = function.getTableParameterList().getTable("DATA");
if (tableList.getNumRows() > 0) {
do {
for (JCO.FieldIterator fI = tableList.fields();
fI.hasMoreElements();)
JCO.Field tabField = fI.nextField();
System.out.println(tabField.getName()
+ ":t" +
tabField.getString());
System.out.println("n");
while (tableList.nextRow() == true);
catch (Exception ex) {
ex.printStackTrace();I am also facing the same issue when using 4-way CPU for processing RFC_READ_TABLE I get following error (Error: DATA_BUFFER_EXCEEDED: Selected fields do not fit into structure DATA) .
when I set the NO_DATA=X in RFC_READ_TABLE then returned data object is empty , is this expected behavior ? if yes then how do we extract data without getting this error .Help is greatly appreciated -
Migrating an SAP 4.7x110 system on W2003 32-bit to a 64-bit host (x86_64)
We want to migrate an SAP 4.7x110 system on Windows Server 2003 32-bit to a 64-bit host (x86_64). Afterwards we want to upgrade the system to ECC 6.0.
According to PAM, 4.7x110 is not supported on Windows 64-bit.
According to note 960769,
"After the migration to the 64-bit hardware, your SAP system may have a status that is not supported by SAP for productive use (see Note 814834). You may need to upgrade to a new SAP release. In this exceptional circumstance, SAP offers support for the duration of the upgrade. Note that SAP does not support a longer, more productive use of such a system for the period after the migration and before the upgrade....
...We generally recommend to use SQL Server 2005 (64-bit) for the productive use on x86_64. However, the 32-bit operation of SQL Server 2000 on Windows x86_64 64-Bit (supported by Microsoft) is also supported by SAP...
...The following table illustrates which OS/DB combination supports each SAP release in the target system.
Source System Target System (Kernel, DB Software) Support Comment
3.1I 3.1I 32-bit, MSSQL 2000 32-bit only for upgrade (a,c)
4.0B 4.0B 32-bit, MSSQL 2000 32-bit only for upgrade (c)
4.5B 4.5B 32-bit, MSSQL 2000 32-bit only for upgrade (c)
4.6C 4.6D 32-bit, MSSQL 2005 64-bit productive (b)
620 640 64-bit, MSSQL 2005 64-bit productive (b)
640 640 64-bit, MSSQL 2005 64-bit productive (b)
700 700 64-bit, MSSQL 2005 64-bit productive (b) "
According to note 814834,
"SAP supports the x86_64 platform on Windows 2003 Server SP1 x64 for kernel 4.6D and kernel 6.40 and higher. ... For product versions based on kernel 6.40 and higher, only 64-bit operation is supported."
According to note 905634, about SQL Server 2005 support (where a mention to R3E 4.7 x110 is missing)
"Supported SAP products based on SAP_BASIS 6.20 and SAP_BASIS 6.40
Product Windows platforms
BW 3.10 x86, IA-64
SCM 4.0 x86, IA-64
EBP/CRM 4.0 x86, IA-64
ECC 5.0 SR1 x86, IA-64, x64
NetWeaver'04 SR1 x86, IA-64, x64
SCM 4.1 x86, IA-64, x64
SRM 4.0 SR1 x86, IA-64, x64
CRM 4.0 SR1 x86, IA-64, x64
R3E 4.7 x200 SR1 x86, IA-64, x64
SolMan 3.2 SR1 x86, IA-64, x64 "
+//////////////////////+//
According to all this information, may I move our 4.7x110 system onto a Windows Server 2003 SP1 64-bit, SQL Server 2005 64-bit, and after that we would upgrade to ECC 6.0?
Thanks !!!
Eva
Edited by: Eva Verdaguer on Jul 25, 2008 12:41 PMSorry, I forgot posting the SAP answer, which is also "Yes":
30.07.2008 - 16:19:00 CET - Respuesta by SAP
Dear Eva,
Yes, you can move to the 64 bit platform with SQL Server 2005 according
to note 960769.
Information in note 905634 means there is no installation DVD for
release 47x110 for SQL Server 2005. So it is not possible to do a fresh
installation of 47x110 except if you follow the workaround of note
899111 (for x64).
Best Regards,
Manuel García Guardiola
SAP Active Global Support - Netweaver Web Application Server
****************************************************************+
Thanks very much for your message, anyway.
Regards !!
Eva -
Export SAP GUI Logon system properites to another laptop
Hi, SDN Fellows.
I want to run SAP GUI logon systems in another laptop. After installing a new SAP GUI client. Instead of re-add the logon system properties, is that a way I can export and import from another laptop? Say I have 10 logon system properties (some with application server and some with logon groups), how do I pick the 8 of 10, and export to another SAP GUI in another laptop?
Thanks,
KentHello Kent,
for SAP GUI for Windows 6.20 or 6.40, please have a look at [SAP note 512040|https://service.sap.com/sap/support/notes/512040], for SAP GUI for Windows 7.10 refer to [SAP note 1035560|https://service.sap.com/sap/support/notes/1035560] and for SAP GUI for Java please read chapter 7 of the manual included in the SAP GUI for Java installation.
Best regards
Rolf-Martin
Maybe you are looking for
-
hi, 1 may i know why need to create request in va01 prior to debit or credit memo in vf01? 2 if without request, what would happen? thanks
-
How to print only certain parts of a page based on form input
I need to know how to do the following. I have a PDF with a listing of five addresses. I need to be able to use radio buttons, check boxes, or something similar in order to select certain addresses, and have only those print. But, I need to keep all
-
Hi there, I'm having a problem with Acrobat 9 Pro and Win 7 Dynamic Stamps. I'm an IT technician and I'm trying to help a client wich uses Adobe 9 Pro and Stamps...Dynamic ones. Because we live and work in Portugal, I had to use the next string, in o
-
Premiere Pro CC will not open any prproj files.
I'm working on a feature length. We have a premiere in 2 weeks! My PC computer shut down yesterday afternoon so I did not restart. (It sometimes does this) When I switched it on this morning, I tried to start Premiere Pro but it moved at a crawl
-
I have a question regarding the DR attribute (PDF/A Spec): In the interactive form dictionary the DR attribute is defined as: "A document-wide default value for the DR attribute of variable text fields" and then the DR attribute can be used again in