Middleware Monitoring--Exchange Object Name

Hi
I am monitoring CRM middleware. In tcode SMW01 Iam getting an error as "Partially send, receivers have errors". Its long text indicates "Exchange object name could not be determined". Anybody knows wht this exchange object is and how to solve this error.
Useful suggestions will be awarded.
Regards
Deepika

Hi all,
Can anybody who have worked with middleware tell why the problem is appearing?
Thanks
Deepika

Similar Messages

Middleware monitoring

Hi Everybody,
Iam doing middleware monitoring. In SMW01, Iam getting an error with Bdoc description has "Partially send, receivers have errors" The error message is-" Exchange object name could not be determined". If anyone know how to rectify this error please reply. Useful replies will be suitably rewarded.
Thanks and Regards,
Deepika

Hi Deepika,
Can you provide Some more details like BDOC type, Flow context description and Queue name.
If possible send the screen shots to this id.
ranganadh1981'at'yahoo.com
in the above address 'at' stands for @
Regards
Nadh

Outlook no resolving Exchange Server name , resolving another name like SID Object

Hello All ,
I Have Exchange 2013 installed on windows server 2012 , Outlook no resolving Exchange Server name , resolving another name like SID Object . Please see the attached file below .
how can fix the issue ?
Thank you

Hi,
Please run following command to verify whether the Outlook resolved the correct Exchange Server GUID:
Get-Mailbox MailboxName | FL name, ExchangeGUID
Following Screenshot is the test result in my lab, for your reference:
If we get the correct GUID, it means we have already connected to Exchange Server successfully.
The GUID format for the server name in Exchange 2013 is an expected behavior.
Found a similar thread for your reference:
Outlook is not resolving CAS server Name
http://social.technet.microsoft.com/Forums/exchange/en-US/5868d45a-ee93-4c55-927b-4dd2b9eaeec5/outlook-is-not-resolving-cas-server-name?forum=exchange2010
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Sender CC for MS SQL 2005 Driver error invalid object name

Hello people,
can some one help me with the following problem?
I'm trying to implement a JDBC to IDoc XI/PI scenario with PI 7.1.
In RWB CC monitor i'm getting the following error : "Database-level error reported by JDBC driver while executing statement 'SELECT * FROM SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'SAP_SALES_TRANS_PAYMENTS'.'. For details, contact your database server vendor".
Communication channel configuration:
JDBC Driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
Connection: jdbc:sqlserver://<IP>:1433;databaseName=<DB Name>
Query SQL Statement is : "SELECT * FROM SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0'"
Update SQL Statement: "UPDATE SAP_SALES_TRANS_PAYMENTS SET TRANSFERRED_FLAG='1' WHERE TRANSFERRED_FLAG='0'"
The name of the database is 'SAP_SALES_TRANS_PAYMENTS', is checked. Are the table name and/or table fields names key sensitive?
The MT definition is identical with the data base table.
Thanks Stefanos

Hello,
this issue is solved now.
The problem was in the name of the database table. The Database was created for more then one
company codes (by an other partner company ) and the full/right name in the query is
SELECT * FROM dbo.<company_code>$SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0'
Best regards
Stefanos

Extended Events exceptions: Invalid object name '#x'

We have recently begun using Extended Events in SQL Server 2012. I noticed something that I don't understand and haven't found an explanation for. There seem to be a lot of exceptions logged for "Invalid object name '#x'", where #x is any temp
table name. This includes ones like "Invalid object name '#tmp_sp_help_category'", which is not even a table in our code.
This does not seem to happen consistently, but I have repro'd it several times. Each time there is no error shown in Management Studio. It happens on alters of stored procedures that use temp tables as well as when they are run. It happens even for a script
as simple as the one below, which logs an exception saying "Invalid object name '#x'" and indicating that it has a severity of 16.
Has anyone run across this? I am guessing these are not exceptions that should actually be logged, but then again there might be times when a temp table really is missing, so we can't just ignore them all.
Thanks,
Ron Rice
create table #x(x1 int)
select * from #x
Ron Rice

The #tmp_sp_help_category table is associated with SSMS Activity Monitor:
http://blogs.msdn.com/b/grahamk/archive/2009/10/20/troubleshooting-sql-server-management-studio-with-sql-profiler-and-debugging-tools-part-1.aspx
You may consider to report at Connect:
https://connect.microsoft.com/SQLServer
I am moving it to Tools.
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Middleware Monitoring (Trn: SMW01) BDoc Msgs

Hi All,
We are currentely working on CRM 4.0 and i am facing an issue in the area of Middleware Monitoring (Trn: SMW01) where we monitor BDoc Msgs. There are aproximately 1000 BDocs in error state with "BDoc Validation Error" for a particular period e.g. from 1st Feb 2008 to 29th Feb 2008.
I was told that i can reprocess them (by selecting some BDocs regularly).
While Reprocessing them there is a pop-up stating "Reprocessing BDocs can cause inconsistency"
But still our team is going for "YES" option.
Can we do this?
or Is there any other way we can make them clear. Kindly advise me in this issue. It is bit URGENT and need to be addressed immediately.
Thanks and Regards,
Ramana Rao

Hi
It is not suggested to reprocess the error BDoc.
BDocs in Error status should be marked as deleted to avoid re-processing that might lead to inconsistencies.
By marking the BDoc as deleted saving its IDs the object ID is added to the BDoc Recovery Work List which allows for further analysis in transaction SMW3RC.
Two main selection options are possible from SMW3RC: Displaying the work list and displaying the process list.
The work list is the list of BDoc messages which needs to be recovered. As soon as a BDoc message is deleted in SMW01 by saving the identifiers, it is stored into that work list.
This list can be analyzed by the administrator who must decide which operation is adequate for processing the data. Possible operations are:
1. Extracting the data from CRM (Post)
2. Create a Request from R/3
3. Create a DIMA comparison
4. Mark the BDoc message as completed
As soon as the administrator has selected the desired operation, the entries are removed from the work list and stored into the process list.
From the process list, it is possible to start the desired operation.
For mass processing of the process list use transaction SMW3RCW

Duplicate Object Name Error When Publishing Crystal Reports from BW to BOE

Hi,
We recently upgraded our systems (all client and server) to SP2.7 in order to solve a problem with saving Crystal Reports to BW. Now we are experiencing a new error when trying to publish a Crystal Report from BW to BOE (either all in one step from Crystal Reports application or directly from within BW).
Upon trying to publish a Crystal Report from BW to BOE, we get the following error:
"An error occurred while saving and / or publishing. The return code 1 was returned from the server. Logon to Crystal Enterprise failed. Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : Duplicate object name in the same folder."
We have repeated this issue numerous time with different reports, users and logon credentials and have verified that there are NOT any duplicate object names.
Additionally, in some cases, the report ultimately publishes to BOE, but with the above error interruption along the way.
Any ideas?
Thanks,
Josh
Edited by: Josh Crawford on May 10, 2010 9:46 AM

Ingo,
Apologies for the delayed response. We've spent a few days poking around with this issue, and had even opened a customer message for it (13641).
In the end, it seems that the problem was somehow associated with the "Prepare this report for translation." flag in the "Save to BW Options" dialog box of Crystal Reports. If we try to Save & Publish with the Translation flag selected, we get the duplicate entry error. If we Save & Publish without the Translation flag selected, everything is fine.
There are still some details we need to look into, but for the time being it looks like we don't have an issue anymore(assuming we ever did) as we're not concerned with Translation capabilities.
If we come across the problem again, I'll post again.
Thanks,
Josh

Create directory / object name must NOT be case sensitive

SQL Dev. 2.1 - the wizard, chosen from the left side navigator, submits a wrong create statement in which the object name becomes case-sensitive. This should not be so! Even if you write the new object name in small letters , the object name must end up in the data dictionary with capitals. kind regards Inger ([email protected])

Which wizard? If I use a create table wizard, for example, and enter the table in lower case, this is indeed stored in the DB as upper case, as you require.
Please provide more detail for your problem.
Sue

Find object Names in a file and print all those objects Names

Hi All,
I am new to this forum.
I want to know how to read only objects names in txt file. In the text file i have sql queries, package names, Function Name. I need to read all the objects and display out put. The file contains around 20000 Lines.
Please suggest me.
Thanks & Regards
Suresh.

Gurram wrote:
want to read .rex File. The file contains combination of SQL code with table Names, Packages,Functions,There are three basic ways to read an external file.
You can use UTL_FILE and use standard/basic file I/O calls like fread() and fwrite() - common amongst most (if not all) programming languages.
You can define an external table for the file, and SQL*Load the contents of the file dynamically via a SQL SELECT statement.
You can load the file into a CLOB using DBMS_LOB and then process it - quite useful if the text file is XML as the XMLTYPE supports parsing a a CLOB containing XML.
I want to pick Each object name put in a separate file line by line.That in turn will need to use UTL_FILE to create an external file.
Keep in mind though that your in a database environment with PL/SQL. The very best place for data is inside the database in SQL tables. Not outside as external files. Thus you need to ask yourself whether dealing this way with external files is the best solution, and a robust and scalable one.
Granted, many times from the database side we need to deal with external files. The optimal method usually is to load that file's data into a database table as structured data - data that can be accessed via SQL and sorted, filtered, aggregated and analysed.
To provide a "file" as output - this should ideally be done directly from structured data (SQL tables). And can be done using HTTP (via a web enabled PL/SQL procedure that supplies the file content as a http Mime stream), using FTP (via <i>UTL_TCP</i>) or as a CLOB via a PL/SQL call interface. Using UTL_FILE is not necessarily the only option.

SSRS Error : Query execution failed for dataset 'dataSet'. (rsErrorExecutingCommand) Semantic query execution failed. Invalid object name 'RPT.*********'. (rsSemanticQueryEngineError)

I am new to SSRS and I am trying to migrate reports from 2008 to 2012. As I have so many reports to migrate, I simply got the back up of ReportServer,
ReportServerTempDB, and Encryption Key and restored them to test environment. I made necessary configuration from RS configuration tool. I am able to see the reports now when I browse //hostname/reports. But when I open any particular report I am getting some
error.
· An error has occurred during report processing.
(rsProcessingAborted)
Query execution       failed for dataset 'dataSet'.
      (rsErrorExecutingCommand
Semantic query        execution failed. Invalid object name
       'RPT. ******'. (rsSemanticQueryEngineError)
****** - I am assuming this is a custom data class.
Does anyone have insight on this? or any better way that I can migrate the reports to new server with less efforts.
I don’t have the reports solution file to deploy the reports, so I have followed backup and restore process.

Hi Kishore237,
According to your description, you migrated some reports from Reporting Services (SSRS) 2008 to 2012. Now you get error when accessing the reports on SSRS 2012. Right?
In this scenario, did you modify the report data source in database after migration? You can try to open the report in Report Builder or Report designer and check the report dataset. If you can preview the report in Report builder or Report designer,
please try to redeploy the report to Report Server. If it is still not working, please try to restore the database from backup. And for migrating reports, please follow the "Content-Only Migration" in the link below:
http://msdn.microsoft.com/en-us/library/ms143724(v=sql.110).aspx
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.

SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010

Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder.

Post Author: dmface15
CA Forum: Administration
I am working in a new enviorment and i am trying to save a report to the Crystal Server via the CMC. I am uploading the report from the objects tab and attempting to save to a folder. The report has 1 static defined parameter and that's it. When i click submit to save the report i receive the following error message: "There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder." There is not a anothe report within the folder with that name. What could be causing this error message and equally important, what is the solution.

hte message you received about duplicate user probably means something hadn't fully updated yet. Once it did then it worked...
Regards,
Tim

How to hide object name in tray of pages

Hi everybody,
I want to hide the object name in the tray of a page.
I act as follows: open Page in VC --> Configure Page --> Look & Feel --> unselct "Show Object name in Tray"
I thought that is the right way, but every time I want to deploy, the option is true again.
Could anybody help me?

Hi Robert,
Unfortunately, evrytime you open the model, it shows default values for the fieds. The only field for which it shows the correct value in the dashboard is 'Show Help Option'. However, at runtime, it does reflect the changes you make. You can check that in PCD.
e.g. If you uncheck the checkbox for 'Show object name' and deploy the first time. The page should reflect the change on the Portal in PCD, however in the model shows the default value i.e. the checked checkbox. If you deploy it again, it won't change the value on the portal. It will still retain the value(unchecked,) on the portal. In order to change the value back to what it was (checked) originally, you have to uncehck the checkbox and check it again and then deploy. The values will change on the portal.
I don't know the reason behind this behaviour though.
Regards,
Ajay

How can I set the Object Name to the file name on import?

All-
I've been manually typing the filename into Aperture's Object Name metadata field. Is there a way to do this automatically? I use metadata presets to fill in many other fields on import but haven't found a way to set metadata fields on a file-by-file basis.
Perhaps there's a way to do this with the thousands of images already in my library as well...
Thanks,
Andreas

Here's the cleaned-up version:
tell application "Aperture"
set selectedImages to the selection
repeat with i in selectedImages
set tName to name of i
set value of IPTC tag "ObjectName" of i to tName
end repeat
end tell
Some other related bits, which you can probably work out how to put into the above script:
Find out the AppleScript names of the IPTC tags (but only tags which have a value for that image), the names will be listed in the 'result' pane in the Script Editor:
tell application "Aperture"
set selectedImages to the selection
get name of every IPTC tag of item 1 of selectedImages
end tell
The same for EXIF tags:
tell application "Aperture"
set selectedImages to the selection
get name of every EXIF tag of item 1 of selectedImages
end tell
And for any custom tags you have set up. If you haven't set up any custom tags (one of my main reasons for going with Aperture) this will just return camera and picture time zones:
tell application "Aperture"
set selectedImages to the selection
get name of every custom tag of item 1 of selectedImages
end tell
Finally, keywords:
tell application "Aperture"
set selectedImages to the selection
get name of keywords of item 1 of selectedImages
end tell
To grab the first keyword name try 'name of keyword 1 of...' etc.
To grab the parent keywords for hierarchical keywording stuff try experimenting with 'get parents of keywords of'. The keywords seem to be read-only from AppleScript, so a magic script that added all parent keywords doesn't seem to be possible.
Ian

Cost element report with cost object name column

Hi,
i'm looking for a report similar to S_ALR_87013601: Cost Elements: Breakdown by Object Type, but including a column with the cost object name. Does anyone know if such a report exists? If it doesn't exist, how can i create a report like this?
Some of my company costs are assigned to cost centers and some of them are assigned to wbs elements. We would like a report where we could have all the information together.
Thank you very much

Hi Xavi ,
Some of my company costs are assigned to cost centers and some of them are assigned to wbs elements. We would like a report where we could have all the information together.=>
There is not standard report available.. which will display total cost per company code.. i,e cost booked on cost centers, internal order and WBS elements ... This is becuse each modules store data in seperate tables.
You have to create a ABAP report to serve your pourpose. You have to collate all the costs booked in a company code for cost centers, IO and WBS elements . Pick up real costs only as per company code..
We are using such custom report and its working fine.
Regards
Sarada

Middleware Monitoring--Exchange Object Name

Similar Messages

Maybe you are looking for