Middleware Monitoring (Trn: SMW01) BDoc Msgs
Hi All,
We are currentely working on CRM 4.0 and i am facing an issue in the area of Middleware Monitoring (Trn: SMW01) where we monitor BDoc Msgs. There are aproximately 1000 BDocs in error state with "BDoc Validation Error" for a particular period e.g. from 1st Feb 2008 to 29th Feb 2008.
I was told that i can reprocess them (by selecting some BDocs regularly).
While Reprocessing them there is a pop-up stating "Reprocessing BDocs can cause inconsistency"
But still our team is going for "YES" option.
Can we do this?
or Is there any other way we can make them clear. Kindly advise me in this issue. It is bit URGENT and need to be addressed immediately.
Thanks and Regards,
Ramana Rao
Hi
It is not suggested to reprocess the error BDoc.
BDocs in Error status should be marked as deleted to avoid re-processing that might lead to inconsistencies.
By marking the BDoc as deleted saving its IDs the object ID is added to the BDoc Recovery Work List which allows for further analysis in transaction SMW3RC.
Two main selection options are possible from SMW3RC: Displaying the work list and displaying the process list.
The work list is the list of BDoc messages which needs to be recovered. As soon as a BDoc message is deleted in SMW01 by saving the identifiers, it is stored into that work list.
This list can be analyzed by the administrator who must decide which operation is adequate for processing the data. Possible operations are:
1. Extracting the data from CRM (Post)
2. Create a Request from R/3
3. Create a DIMA comparison
4. Mark the BDoc message as completed
As soon as the administrator has selected the desired operation, the entries are removed from the work list and stored into the process list.
From the process list, it is possible to start the desired operation.
For mass processing of the process list use transaction SMW3RCW
Similar Messages
-
Hi Everybody,
Iam doing middleware monitoring. In SMW01, Iam getting an error with Bdoc description has "Partially send, receivers have errors" The error message is-" Exchange object name could not be determined". If anyone know how to rectify this error please reply. Useful replies will be suitably rewarded.
Thanks and Regards,
DeepikaHi Deepika,
Can you provide Some more details like BDOC type, Flow context description and Queue name.
If possible send the screen shots to this id.
ranganadh1981'at'yahoo.com
in the above address 'at' stands for @
Regards
Nadh -
Middleware Monitoring--Exchange Object Name
Hi
I am monitoring CRM middleware. In tcode SMW01 Iam getting an error as "Partially send, receivers have errors". Its long text indicates "Exchange object name could not be determined". Anybody knows wht this exchange object is and how to solve this error.
Useful suggestions will be awarded.
Regards
DeepikaHi all,
Can anybody who have worked with middleware tell why the problem is appearing?
Thanks
Deepika -
CRM Middleware Monitoring Cockpit
Hi Gurus,
Iam new to the Middleware when i go to the TC - SMWP,
for the Generation Information -> Missing indexes Status is Yellow
for the Runtime Information -> Adapter Status Information -> Parameters in R/3 Backend(s) -> ECC System -> Parameters for object load management Status is Yellow
Does this lead to any problem or not and how to make it green can anybody help me out
ThanksHi Devi,
Yellow status means a pending request/Bdoc processing.
Generally, if you have R/3 CRM connection, then yellow means notification is not received from R/3 system since a bdoc being send to R/3 system from CRM system.
can you elaborate upon the description you get for the yellow status bdoc.
Best Regards,
Pratik Patel
<b>Reward with Points!</b> -
'Item Not Found 'error in Middleware Monitor
Hi,
Monitoring the MW Monitor..
There is a BDoc Validation error. BDoc type is 'BEABILLDOCCRMB'.
The message on the error segment says ' Item was Not found', Module CRM_DOWNLOAD_BEA_VAL.
Can anyone help me.
PratimaHi Animesh,
There is an Accounting document and it is transferred to finance.
But it is still in the 'Item Not found' state in the MW monitor with a validation error.
Regards,
Pratima -
BPM: After reactivating monitoring always send alert msg's
Hi all,
everytime, when I change something in the business process monitoring setup and "generate and activate monitoring", we got alert messages at the next check, which are wrong.
But it's only the first check after activating, at the second one all alerts are correct.
Does anyone know, why wrong alerts were send out at the first check and how to fix that?
SAP Basis component: release 700 level 15
Thanks in advance for any hints.
Regards,
Marcel
Edited by: Marcel Winder on May 25, 2009 9:22 AMHello Volker,
in this case I only monitor background jobs.
I check the start delay and whether the job was cancelled and every time when i generate and activate it, I got an email (at the next check, not immediately) telling me that the jobs weren't started yet, but they were started.
I got this error for every job, but as mentioned only at the first check, one day later all checks work as intended.
component.......version...............release
ST...................400....................0016
ST-SER...........700_2008_1........0003
ST-PI...............2005_1_700........0006
ST-A/PI............01K_CRM560.....0000
Best Regards,
Marcel -
Samsung monitor/"check signal cable" msg
Been using this monitor for about a year and a half, connecting it to my Mac Mini with a Mini Display Port to VGA adapter. All of a sudden, I get the "check signal cable" message. I replaced the VGA cable; no luck. Then I replaced the adapter; still no luck. The Mini runs fine; I can access it over my network using my laptop. Anybody got any suggestions? Thanks.
EllenReset the SMC > Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
and then the NVRAM / PRAM > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then it doesn't work, test the monitor with another computer and/or test another monitor with the Mac Mini. -
CRM Middleware Monitoring: Adapter Status Information. Waiting Objects
Hello
I am having a problem sending messages of type RSREQUST from CRM to BW
I have been seeing in the SMWP transaction that we have waiting objects in Request Status of Adapter Status Information.
I dont know how I can start it or solve this error
Thanks in advanced
Best regardsHi,
It seems that the maximum number of parallel processing threads(usually 5) have been set in ur system which is why the objects are in status WAIT. Status WAIT is not an error. To correct, would you check the transaction R3Ar3 for all requests tht are in running status. If you have 5 requests here, abort one or two out of them. Then go to SMQ2 and select the queue tht is in status WAIT. Unlock the queue immediately. It should change to status "READY" and should flow across to BW.
Reward points if it helps !!
Rgds
Priyanka Bansal -
Hi,
I have a query about the MW Monitoring Cockpit (SMWP). In the Monitoring Tools section there is an entry called 'Status of CRM Middleware Alert Monitor'. Within that there is tree structure with one entry called:
CRM Middleware BDoc-Msg. in the Flow\...\Status of BDoc Messages
Our system has hundreds of error messages in there for BUPA_MAIN and BUPA_REL. But when I double-click them there are no errors in the BDOC status summary. Can anyone tell me what these errors are? They don't seem to be causing any problems but I would still like to get rid of the 'Red' entries in the cockpit.
Thanks.thanks surya.
But that is kind of the question I am asking. When I go to those transactions everything is green and OK, it's just in the cockpit that these BDOC 'errors' are showing.
Here is what the cockpit entries look like:
10.12.2006 08:06:17 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_MAIN: 3 Entries in Error
10.12.2006 08:06:17 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_REL: 1 Entries in Error
10.12.2006 09:06:14 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_MAIN: 3 Entries in Error
11.12.2006 00:06:16 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_MAIN: 3 Entries in Error
11.12.2006 09:05:21 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_MAIN: 3 Entries in Error
11.12.2006 09:05:21 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_REL: 1 Entries in Error
11.12.2006 10:05:48 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_MAIN: 3 Entries in Error
11.12.2006 10:05:48 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_REL: 1 Entries in Error
11.12.2006 12:05:07 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_MAIN: 3 Entries in Error
11.12.2006 12:05:07 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_REL: 1 Entries in Error
11.12.2006 13:05:35 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_MAIN: 3 Entries in Error
11.12.2006 13:05:35 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_REL: 1 Entries in Error
11.12.2006 14:05:32 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_MAIN: 3 Entries in Error
11.12.2006 14:05:32 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_REL: 1 Entries in Error
11.12.2006 15:05:34 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_MAIN: 3 Entries in Error
11.12.2006 15:05:34 ABC CRM Middleware BDoc-Msg. in the Flow Status of BDoc Messages BDoc Messages in error status (200) ACTIVE BDoc Type BUPA_REL: 1 Entries in Error
thanks -
Crm middleware concepts(BDoc,queueing,mapping)
Hi getting trained in CRM , Can some one send me any documentation related to Middleware of CRM, How BDOcs work,how they are mapped...
thanks in AdvanceHi,
depending which CRM release you want to ues please check these links:
SAP CRM 5.0
http://help.sap.com/saphelp_crm50/helpdata/en/c3/95fc381478ab6fe10000000a11402f/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/aa/ac8d420eb8173be10000000a155106/frameset.htm
SAP CRM 4.0
http://help.sap.com/saphelp_crm40sr1/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
http://help.sap.com/saphelp_crm40sr1/helpdata/en/9e/ef6e59c0b7490c8358d7d75ed2b7fd/frameset.htm
best regards
Carsten -
Hi All,
Can any of them help me in monitoring steps and T-code used while monitoring a CRM Server.
Regards,
Sandeep SinghHi ,
If you are looking for CRM Middleware monitoring T-Codes . Here are few :
1) SMW01 -- Display Bdoc
2) SMW02 - Display Bdoc summary
3) To view the Unprocessed Bdoc Type in the sytem use : SMW03
4) SMW20 - for Bdoc Procsing
5) SMWMFLOW - Monitoring Message Flow
For qrfc related monitroing check
SMQR -- QIN Scheduler ( Inbound Queue checking )
SMQS -- Qout Scheduler ( OutBound Queue checking )
If you have to monitoe R&R queues use transaction : SMOHQUEUE
Hope this helps
Vinayak -
How to create a BDoc in an ABAP report ?
hello
I need to develop a report to send customer specific data from CRM to R/3. This report will be executed as a batch every to update data in R/3 from specific data in CRM (created with EEWB).
The question is : which FM do I have to use to create and process the BDoc ?
I start to develop the report and I tried to use the FM BUPA_MWX_BDOC_CREATE_MAIN.
CALL FUNCTION 'BUPA_MWX_BDOC_CREATE_MAIN'
CHANGING
CT_BP_EXTERN = t_partnerdata.
I fill the table t_partner_data which typ eis BUS_EI_EXTERN_T and the report run seems to run fine as I see the BDoc created with the data in transaction SMW01 but th Bdoc remains in state intermediate state.
When I click on button Show BDoc Msg receivers, the message "No receivers or error segments for BDoc message ..." appears.
When I check the BDoc message classic data, I see the structure CRMW_BUPA_HEAD filled with one entry but the CRMW_BUPA_SITES is empty. With standard transaction, BDoc processing runs fine.
Thanks for any help
Edited by: Jerome Munier on Dec 8, 2008 2:31 PMhello
I give you more details on the aim of the report.
I have created an extension with EEWB which is time-dependent : this extension is a status with validity dates. Only one value of the status is accepted during a period.
In the report, I get the value of the status for the current day. Then I get the list of status of the BP using API of the EEWB.
Then I select the valid status based on the current date.
The I fill the table t_partnerdata TYPE BUS_EI_EXTERN_T.
Then I execute the FM BUPA_MWX_BDOC_CREATE_MAIN to generate and send the BDoc.
Below the part of the code to fill the table t_partnerdata.
Thansk
s_partnerdata-header-object = 'BusinessPartner'.
n° du BP
s_partnerdata-header-object_instance-bpartner = w_partner-partner.
guid du BP
CALL FUNCTION 'BUPA_NUMBERS_GET'
EXPORTING
IV_PARTNER = w_partner-partner
IV_PARTNER_GUID =
IV_PARTNER_EXTERNAL =
IMPORTING
EV_PARTNER =
EV_PARTNER_GUID = v_partner_guid
EV_PARTNER_EXTERNAL =
ES_BUT000 = s_but000
TABLES
ET_RETURN =
ET_PARTNER =
s_partnerdata-header-object_instance-bpartnerguid = v_partner_guid.
type de tâche (mise à jour)
s_partnerdata-header-object_task = 'U'.
s_partnerdata-central_data-common-data-bp_control-category = s_but000-type.
s_partnerdata-central_data-common-data-bp_control-grouping = s_but000-bu_group.
s_partnerdata-central_data-common-data-bp_centraldata-searchterm1 = s_but000-bu_sort1.
s_partnerdata-central_data-common-data-bp_centraldata-partnertype = s_but000-bpkind.
s_partnerdata-central_data-common-data-BP_ORGANIZATION-name1 = s_but000-name_org1.
s_partnerdata-ZZ1RO_DATA = t_data_statut.
s_partnerdata-ZZ2RO_DATA = t_data_canal.
APPEND s_partnerdata TO t_partnerdata.
création d'un BDoc de mise à jour dans R/3 du statut distributeur et canal de rémunération
CALL FUNCTION 'BUPA_MWX_BDOC_CREATE_MAIN'
CHANGING
CT_BP_EXTERN = t_partnerdata. -
Bdoc - Partially send, receivers have errors.
Hi All,
There is Bdoc failure from CRM to R/3. When we looked into SMW01, the Bdoc atate is shown as 'Partially send, receivers have errors'. When clicked on button 'Bdoc Msg errors/ Recievers' , there are no errors displsyed. Only reciever details are shown. What could be the reason for Bdoc failure?
Regards,
Rajesh.Thanks for the replies,
Chandra,
I have checked that 'Contents' button. It is in disabled mode. It looks like there are no errors.
Nicolus,
There are no dumps found in recievers system
Can you please tell me the significance of 'Show Bdoc Classic data' and 'Show Bdoc Ext data' buttons. Will they show us the data send to reciever through Bdoc? I have seen one field missing in the data shown in these screens. Where do we configure these Bdocs, I mean from where this data is fetched to send to reciever?
Thank you,
Regards,
Rajesh. -
Validation error 'Item not found' in Middleware
Hi,
In the middleware monitor, I have some bdocs failed with the validation error ' Item was not found. Validation error occured. module CRM_DOWNLOAD_BEA_VAL, BDoc Type BEABILLDOCCRMB'.
When i look at the document numbers associated , they do exist.
It is in this state for a long time.
Can anyone help.
Regards,
PratimaHi Venkat,
There are no messages in the outbound or inbound queue releated to these bdocs.
These bdocs exist only in the monitor with validation error.
Regards,
Pratima -
Hi Experts,
I am getting the following error in SMW01.
State: Red
Bdoc State Decsription: BDoc validation error
BDoc type: BUPA_MAIN
Flow context description: mBDoc validate
Sender Site name:OLTP
Queue Name: R3AD_CUSTOME.
Please help.
Regards,
Soumya.this is the BDoc error
this the error trace
and this is the BDocs msg error/receivers
thanks
Maybe you are looking for
-
Exception while running ADF 11g application on Weblogic 10.3.2
Hi All, I have Created a ADF Application using ADF faces 11g. I have Created a Webservice Datacontrol and calling Synchronous BPEL flow from an ADF page. I have deployed the ADF application on Weblogic 10.3.2 but while running the page using the URL
-
Apple USB keyboard drawing too much power
I had my apple slim keyboard for more than a year and it always worked perfectly. Last week I started receiving this error message at the login screen: "Because a USB device was drawing too much power from your computer, one or more of your USB devic
-
Randomly printed output is garbled with non-human characters and symbols
When printing from what we believe to be a pdf display, often, but randomly, the printed output is garbled. This may be the second and subsequent pages, only one page, the first one, etc. This happens often, but not exclusively, when printing from a
-
Can I use more than one iTunes account on my apple TV
We just purchased our AppleTV and my wife wanted to use her Mac and her iTunes account to listen to music when I am at work. I setup the AppleTV using my iTunes account. Can I use more than one iTunes account on my apple TV?
-
that's about it!