Middleware- Replicating followup transaction

Hi Experts,
We are creating a Quotation in CRM for which follow up document is a Sales Order.
When these two transactions are replicating to R/3 is the Sales order is created as follow up to the Quotation or these two transaction will be created as two different document types i.e no follow up from Quotation to Sales order.
Points will be rewarded.
Regards
Nadh.

Hi Nadh,
Have you already created quotation and followup sales order in CRM? Then I believe none of them are uploaded into R/3. After creating quotation and followup sales order, then you can upload both together into R/3 as separate documents with no relation. But if you first create a quotation in CRM and after uploading it into R/3, then you try to create a follow-up sales order in CRM then you will end up with some issues. Please read the below SAP help note :
"You can transfer quotations that have been created in SAP CRM to the ERP system, and create follow-up documents there. If a quotation has been transferred to the ERP system, you can only create follow-up documents for it there and no longer in SAP CRM. You can create follow-on orders in SAP CRM for quotations that were created in the ERP system and replicated to SAP CRM. "
<b>Do not forget to reward if it helps,</b>
Regards,
Paul Kondaveeti

Similar Messages

Middleware-Replicating service transaction from CRM to R/3

Hi Experts
We are using the transaction SRVO( Service Transaction) in CRM and it has to be replicated to the R/3.
Can anybody tell me
1.what is the load object for replicating this transaction ?
2.Do i need to make any settings in R/3 for the replication ?
3.Do i need to create one new transaction in R/3. If so where i have to create the transaction ?
4. What would be the document type category of the replicated transaction ?
Thanks in advance
Nadh.
Message was edited by:
Nadh R

Hi Nadh,
Service transactions are replicated to R/3 as sales order, with sales items only.i.e. item category SRVS.
You need to maintain the similar settings as you do while replicating a sales order from CRM to R/3.
1. Create a order type in R/3 with the same name SRVO (Tcode: VOV8)
2. Create the item categories with the same name as being determined in the service order (Tcode: VOV7) e.g. SRVS
3. Mainatin item category determination, the way it is maintained in CRM (Tcode: VOV4)
Other than this, assign an external number range to your order type SRVO which is same as the internal number range of CRM. Ensure that the customer master and product also exist in R/3.
Before replicating a service order from CRM to R/3, Create a dummy sales order in R/3 (VA01) with order type SRVO (only for checking purpose)and your sales area,put the customer master and material and check if the transaction is complete. If not you will have to first remove the incomplete stuff, than only an order will get replicated error free.
If you get incompletion items like Plant, shipping point, contact a SD consultant or post another thread.
Regards,
Shalini Chauhan

CRM_COPY_BADI For Followup Transaction

Hi,
I am currently trying to copy one field from the interaction record in teh IC Webclient to a followup transaction. (These transactions are both business activities). I believe the field I want to copy is in the SUBJECT method. I have created an implementation for this BADI and assigned my own 9ALL filter to it. I have created a system break point in method "SUBJECT". When I create a follow up transaction I can't hit the break-point. Can sombody shed some light on how I can test this copy control?
thanks.
Jamie
Edited by: Jamie Bullen on May 6, 2008 2:37 PM

Right, that makes sense. Here goes my explaination just to make sure I have it right:
1. Obtain GUID for Source document.
2. Obtain GUID for Target document.
3. Copy ET_SERVICE_OS info from Source to Target. Maintain Target Document.
(Does it matter which method this is done in using the BADI?).
Because ther isn't a BADI method for structure ET_SERVICE_OS.
thanks.
Jamie
Edited by: Jamie Bullen on May 6, 2008 4:39 PM

Middleware : Replicating Bp Custom Data

Hi,
I have an issue regarding Middleware. I am replicating BP Custom fields from ISU to CRM. I have updated those fields in BUT0BK and need to get replicate to CRM . But BAPIMTCS structure has not been updated.
I was trying to update BANK DETAILS MW Structure ie BUS_EI_STRUC_BANKDETAIL , but this structure is not Enhancable.
Can anyone suggest what could be the way to resolve this problem.
Thanks & Regards,
Harkesh Dang

Hi Shreya,
I have 2 Custom Fields in ISU and through Event I am calling Function Module which fills my BAPIMTCS structure.
I have a problem that in CRM side i have BankDetail Structure 'BUS_EI_STRUC_BANKDETAIL' which is NOT ENHANCABLE,so that i have created 2 new structure both sides.
When ever i am updating BAPIMTCS-DATA then it replicates my Custom Structure easily and in CRM I am updating my CRM BAPIMTCS strucutre and then BUS_EI_EXTERN structure.
So When Standard fields are getting inserted into DB, my Custom fields are not getting inserted along with that.....!
I need any EXIT or BADI which contains BUS_EI_EXTERN, so that i will able to update my Custom Fields in CRM too when the time of creation of new BankItem.
This is the issue...! Please help me to resolve this.
Thanks
Harkesh Dang

Performance issue followup transaction Oppty to Quote

hi,
i am facing an issue where whenever a user tries to create a follow-up Quote from an opportunity, it is taking more than 7-8 secs...can someone help me understand its a standard time or ways to reduce the time taken.
we have already implemented SAP's go-live recommendations on basis side of tune up.
thanks
RH

Hi Rh,
If you follow up window opens up with the right document, then your configuation set up is fine. Now kindly check if your internet speed and network is quick enough to support the follow up activity.
Also do u face this problem in any other follow up transaction.
Regards,
Hemanth

Middleware errors from transaction smw01 in worklist

Hi,
for all users the MW errors (transaction smw01) can be seen in the worklist as workflow items (7.0 SP4).
Does anybody know how and where to deactivate these settings?
Thanks & Regards,
Wolfhard

Hi,
thank you for this hint!
But I cannot identify any setting there which could be the reason for the workflow items related to the MW errors.
There are only some "historical" mail settings for some users as this system is a copy of the productive system.
Regards,
Wolfhard

Create followup transaction where source doc has only product category

Hi all,
I have configured the system to allow creation of follow up sales order from opportunity. I have done all the necessary configuration relating to copy copy. When the opportunity has products, I was prompted the sales order transaction type for selection and all works well. However, if my opportunity only has product category maintained, I only get appointments and tasks list and the sales order transaction type that I created was not on the list. Is this standard or that there is something I can do with it with further configuration?
Appreciate any help on the above.
Cheers!
SF

Thanks Ganesh,
This is pretty much what I guess too but just want to be double sure Just want to clarify, there is however an item category assigned for the source document. This is based on the configuration in Item Category Determination with the transaction type being assigned a blank item category group.
Regards
SF

Status = Approved then the followup transaction should be created Automatic

Dear Experts,
My client's requirement is
Solution manager is implemented already now client want to use Change request Mangement(ChaRM) functionality.
All the statuses are maintained in the system through the Action profile.
Once the Standard change request(SDCR) get approved then single change request(SDMJ) should be created automatically through actions. Is there any standard action profile for doing this requirement.
This action need to be available in the status approved.
Regards,
Babu.

Hi Babu,
Did you configure ChaRM functionality?
Do you use CRM_ORDER and Action profile SLFN0001_ADVANCED?
If yes, and the status are maintained in the action profile, then it does automatically.
Once the change request(SDCR) is approved by Change Manager a Normal correction request(SDMI) will be created automatically.
Is there any specific reason that your client needs a normal correction request(standard) - SDMJ?
Because normal correction request(SDMI) will serve all the funtionality.
Regards,
Sanjai

Unable to create followup and view transaction types for InteractionRecord

Hi,
We are currently working in crm 7.0 environment.
we are not able to create followup transaction for Interaction Record -
Transaction Type - Business activity(0010).
We are not even able to view the standard transaction types available
when we select followup both in UI and GuI.
Any inputs in this regard are rewarded and appreciated.

Hi sreenicrm,
Have you configured anything in the "Allowed Channels for transaction types".
If not, it may be worth copying the standard transation type and then setting the values in the above screens.
if you set a values of "interaction Center"(IAC) and "CRM Server"(GUI) then you shoudl see the activity.
I am using CRM 5.0 but would imaging it is similar in 7.0.
HTH
Gaz

Cross-System Copying of Transaction Types from CRM to ECC

Hi Gurus,
We have a requirement where we need to create followup transactions from CRM to ECC.
eg:- We want to create a Sales Order in ECC as a followup transaction to a Service Ticket in the CRM.
1) So please guide what needs to be done inside CRM.
2) Is there some specific list of ECC transactions which could be created as followup to a CRM transaction or any ECC transaction can be created as followup.
thanks for your help in advance.
rgrds,
Randhir

Dear Randhir,
You need to ensure that transaction type and item category of ECC and CRM are in Sync. Maintin followup of your transaction type.
Thanks and regards
Pankaj Kumar

Problem while creating followup to a Service Request

Hi,
I am trying to create a followUp to a service request. The problem is, it is not displaying all the followup transactions in popup. When I checked the configuration "Copy Control for Business Transactions", I am able to see more than I see in the popup.
Could you please let me know, why I am unable to see all the transactions in the popup.
Thanks,
Sandeep

Hi Maggie,
I checked it. CRM WEB CLIENT is assigned for all the transaction types. In my copy control I manitained around 10 transactions.
when I cliked on create follow-up, 5 transaction types I am able to see in popup. But other 5, I am not able to. not sure why.
Thanks,
Sandeep

Custom export in MMBE transaction

Hi Experts,
I have a requirement, I am replicating MMBE transaction, to add additional columns in the output and to add an export button for downloading ALV.
What is the best approach to achieve this?
Thanks,
Anil

Hi,
You have to use following User Exits;
MEREQ001 - Customers' Own Data in Purchase Requisition

Is it possible to launch Transaction Launcher in E-Commerce

Hi All,
Is it possible to launch transaction launcher in E-Commerce application like the way we have it in CRM Web ui( placing the logical link on navigation bar).Any pointers on this would be of great help.
Thanks,
Udaya

Thanks Peter for your response.
We are doing CRM IC Web client implementation where in we are bringing ECC VA01,VA02 Transactions on to web ui and providing this to agents.
In the same context, the client has requested for similar kind of links on E-Commerce application to look for ECC Sales order and other ECC Transactions.
Here the catch is we are not replicating the Transactional data in to CRM. Here we are having single crm instance connected to multiple back end(ECC) Systems.
Can you give us any SAP Reference link that tells us it is not possible to provide TL in E-Commerce application.
Thank you.
Thanks,
Udaya

Dml triggers behaviour on secondary replica

Quick Q: Say on primary replica database has DML triggers on tables which again writes to other tables (writes to audit log history table) when a DML action is performed on principle table - what is the behavior on secondary replica db?
Mahesh

I understand that part on primary replica and transaction log, but what's the behavior of triggers on secondary replica - are they triggered or disabled?
They aren't triggered, replaying the log doesn't cause anything such as that to happen. There is nothing to cause them to fire, it's not redoing the statement used, it's just redoing the log. Individual statements are not captured by the log, just the changes
are reflected.
-Sean
The views, opinions, and posts do not reflect those of my company and are solely my own. No warranty, service, or results are expressed or implied.

Oracle Distributed Transaction

Hi
I am coding a middleware managing distributed transactions.
the distributed transaction has 2n transactions branches and involves n oracle DBMSs (oracle)
and has the following form:
-connects to n DBMSs,
for each,
send a read sql statement, get a resultset consisting of one record
do some processing on the attributes
send an update sql statement of the same record
I don't know how write such code, the sample code http://download-uk.oracle.com/docs/cd/A97630_01/java.920/a96654/xadistra.htm
doesn't show such case, indeed each pair of branches are dependent
cheers

Hi Justin,
thank you for you reply, my software architecture plays a role
hereafter the code commented
Iterate on involved DBs (they are n)
// look up for record prKey
String sqlB1 = "SELECT * FROM item WHERE recordKey = "+ prKey;
//create a transaction branch instance TB from sqlB1
//enqueue TB in the transaction branches queue of the distributed transaction T
//assume here that I get pAttrOld1 and pAttrOld2 in the resultset of sqlB1, that I don't
//understand how i will obtain
//do some processing
//the computation is complex
String pAttr1 = pr.computeRecordAttribute(pAttrOld1, p, dfLevel, dataAttr1);
String pAttr2 = pr.computeRecordAttribute(pAttrOld2, p, dfLevel, dataAttr2);
// update record prKey
sqlB2 = "UPDATE Item " +
          "SET pAttr1 TO "+ pAttr1 + "," +
     "pAttr2 TO "+ pAttr2 + "," +
               "dKey0 TO "+ drKey +
          "WHERE recordKey = "+ prKey;
//create a transaction branch instance from sqlB2
//enqueue TB in the transaction branches queue of the transaction T
// end iterate
Finally enqueue T in the working queue of a Transaction Manager
the latter will enqueue the transactions branches in the working queues of threads connecting to the different DBs and wait a time out until all replies arrive
the connecting threads will enqueue the prepare result, XAResource, Connection      XAConnection related to each transaction branch in the reply queue of the transaction manager
the transaction manager decides to commit or rollback T depending on the prepare results obtained (it will also close connections ...)
as you see here I need sqlB1 resultset to execute sqlB2, how can I manage that with this architecture?
any advise concerning the architecture is welcome
cheers
rym

Middleware- Replicating followup transaction

Similar Messages

Maybe you are looking for