Middleware - SAP AII

Hi RFID Friends,
i found many informations about SAP AII and RFID Tech. in this , but nothing to a Middleware, witch is essentail for comm. between RFID hardware and SAP. help.sap.com is like a cloesed book in this case. I read about BizTalk or Websphere, XI... but all those are to much for an Small Business case. it's unclear for me:
1. What SAP AII need to get DATA from an Reader. What is the simply and cheap way?
2. Because AII is an standalone System, is XI neccecery to get this Information from AII into SAP ERP?
Can you help me please.
Thank you all
Bülent

Hi Bullent,
You were correct in not finding out any information on RFID Middleware on help.sap.com.
This is because SAP is not involved in that business at all. Instead SAP depends upon its partners to deliver RFID middleware solutions. For eg, Biztalk from Microsoft, IBM middleware and PIXIE from Infosys technologies Ltd are such examples. SAP AII exposes an interface which the middleware development team has to comply with. Then there is also a SAP Certification process for Device middlewares that support communication with SAP AII.
SAP similarly also depends upon its partners for RFID hardware also. For. Zebra, Motorola are some of the RFID hardware that are compliant with SAP AII for mobile devices.
Answer to your questions:
1) SAP AII can get whatever data is written on the tags. It depends on your business requirement what data is needed by you on the tags. There is no simple or cheap way. There are two ways.
a) Fixed Readers: Require RFID middleware between hardware and SAP AII
b) Mobile Readers: Can be directly supported by SAP AII witout device middleware. (So this can be cheaper )
2) Yes SAP XI is necessary to send data to SAP ERP. Else it will require huge custom abap development to support this.
I hope i have answered your questions. Thnks

Similar Messages

Reg. Changes in SAP AII D.C 4.0

I am using SAP AII D.C. 4.0 and SUN RFID 3.0 middleware to find out RFID Autoid solutions. While doing tag Commission from SAP, It sends a XML message to SUN RFID middleware. Because of SUN RFID 3.0 supports only SAP AII D.C. 2.1 XSD, I am getting XML Parser error. SAP AII D.C. 4.0 has some modification in XSD.
What is the workaround for this?
A detailed help would be appreciated.
Please mail me relevant documents to [email protected]
Thank you

solved

RFID - SAP AII

Hi all,
Need some infomation on SAP AII and also how to relate RFID with SAP AII and also SAP Data base,
How the data will be filtered in SAP AII?
If anyone knows regarding this let me know
Thanks,
-Teena.

Hi Teena,
SAP RFID Solution Package
The SAP RFID solution package provides a complete auto-ID middleware solution connecting RFID data directly from auto-ID data capture sources, such as RFID readers and device controllers, and integrates the data directly into enterprise applications . It converts raw RFID data into business process information by making the associations from key business rules, master data, and transactions to raw RFID data .
SAP Auto-ID Infrastructure
Auto-ID Infrastructure is compatible with SAP R/3 4.6C or greater, and it also has adapters for SAP Warehouse Management, SAP Business Information Warehouse, SAP Supply Chain Event Management, SAP Advanced Planning and Optimization, and all SAP NetWeaver components.
Auto-ID Infrastructure is designed to synchronize EPC and RFID information into your ERP systems by providing a complete, multidimensional data model of RFID-enabled assets, including:
1.EPC number
2.Asset location
3.Status
4.Last RFID read point
5.Handling unit number
6.Packing hierarchy association (such as item, item-to-case, or case-to-pallet)
It then maps this data to your SAP R/3 system via association to handling units (HUs). Handling unit headers include a standards-based HU number, weight, volume, and dimensions. HU content includes material number, quantity, unit of measure, batch number, plant number and location, and stock category (such as consignment), as well as serial number and inspection lot data.
These HUs are then associated with EPC numbers and are integrated into the appropriate transaction for processes such as production orders, transfer orders, sales orders, delivery (ASNs) and receipt, shipment, picking and packing, and inventory move and packing operations.
Because it is built on SAP Web Application Server, Auto-ID Infrastructure supports multiple communication interfaces (HTTP, SOAP, WSDL, SOCKET/ TCPIP), as well as mobile interfaces to PocketPC 2003 and Mobile Linux (Sharp).
It runs on Windows (XP, 2000, NT), Unix, and Linux, and supports Oracle, SAP DB, DB2, and Microsoft SQL Server.This should answer your query.
Thanks & Regards,
Pawan P.Khilari
*Mark useful Answers

Relations between SAP AII, ONS, PML and Savant???

The EPCGlobal provides a standard EPC-Network containing the EPC-Code and infrastruture-components like the RFID-Tag and -Reader, the ONS-Server, the PML-Server and a RFID-Middleware called Savant.
On the one hand I found a couple of articles where the SAP Auto-Id Infrastructure (SAP AII) is said to be a "RFID-Middleware". On the other hand I found a lot of presentation sheets with illustrations of the SAP AII architecture where the SAP AII is connected to Savant by the device controller and to the ONS/PML Servers by SAP XI.
Can anybody inform me about the relationship between the SAP AII, the ONS/PML Servers and Savant? Is the SAP AII a substitute for Savant? Which component of the SAP Auto-ID Infrastructure asks the ONS-Server for the URL to a PML Server where further information about an object which is identified by the EPC code are located? Are product information stored on a PML-Server anyway? Or are information only stored in the ERP-Backendsystem?
Thank you for your reply.

hi.Dirk
1)SAP AII is a "RFID-Middleware", but mostly it is a RFID Middleware for business process. It focus on business more than RFID readers. So it is not a RFID Reader manager(Device connector, or something like that)
2)Savant is a specification or a product release by EPC global. You can download the savant specification on EPC global .
http://www.epcglobalinc.org/about/AutoID_Archive/documents/6_auto_id_savant-1_0.pdf
Savant is also a product, many company IBM, SUN make their RFID Middleware follow the EPC savant specification. And also EPC has a RFID-Middleware call savant.
Savant is design to manager RFID readers, filter RFID tag information, and log events.
3)The relation between AII and savant is they are on the diferrent layer of RFID Middleware, they should be work together.
4)ONS is another EPC RFID issue, it is design to record RFID tag data. On EPC's idea, all the data about RFID tag should be record on ONS server. I do not know if it will come true in the future.
5) On SAP solution, Most of the data is still stored in SAP backend-system(R3,SCM,BW......), and information about RFID, e.g. RFID tag, RFID device, tag event is stored in SAP AII. And you can use BW in AII, if mass data is generated.
6) PML is just a RFID XML.
Regards
Sheng

How to modify SAP AII XML So that i can able to work with AII DC -2.1 & 4.0

I am new to SAP. I am doing integration work between SAP AII and Sun Java RFID Middleware. Currently Sun RFID 3.0 version supports SAP AII DC 2.1, but I am using SAP AII DC 4.0.
When the Tag commissioning was performed, I am getting an error like "Unexpected element: ConfigureTagFilter".
I need to know following things,
1) Can I remove ConfigureTagFilter tag from AII XML? If possible How to do it?
2) Is there any Compatibility mode option in SAP RFC or AII settings available, so that I can able to switch between AII DC 2.1 & AII DC 4.0 XML formats.
Please let me know how to do this in SAP AII.
Thanks in Advance.

hi,
you can change the XSLT mapping in AII
I did it for some other tools (intermec reader) that work with AII 2.1
and now they work for AII 4.0
Regards,
michal

I need SAP AII-DC 4.0 Command. XSD

Hi,
           I need SAP AII-DC 4.0 Command. XSD file. Please supply the same. Kindly mail me at [email protected]
Thanks in advance.

Thank you Mr.Mikhail Koshkin for your valuable document
I need one more help. I am new to SAP. I am doing integration work between SAP AII and Sun Java RFID Middleware. Currently Sun RFID 3.0 version supports SAP AII DC 2.1, but I am using SAP AII DC 4.0.
When the Tag commissioning was performed, I am getting an error like "Unexpected element: ConfigureTagFilter".
I need to know following things,
1)   Can I remove ConfigureTagFilter tag from AII XML? If possible How to do it?
2)   Is there any Compatibility mode option in SAP RFC or AII settings available, so that I can able to switch between AII DC 2.1 & AII DC 4.0 XML formats.
Please let me know how to do this in SAP AII.
Thanks in Advance.

Com.sap.aii.af.ra.ms.api.DuplicateMessageException - Msg Successful

Hi all,
We have a scenario where JDBC sender adapter polls - DB2 data base.
Picks up the records. Updates the records.Messages are sent out.
Everything is fine. The message is sent to IE and then to the receiver.
But I see a com.sap.aii.af.ra.ms.api.DuplicateMessageException in the audit log.
2008-11-21 00:00:26 Error Putting message into send queue failed, due to: com.sap.aii.af.ra.ms.api.DuplicateMessageException:
Message ID 56149940-20b1-472f-0905-893a906a65cf(OUTBOUND) already exists in database:
com.sap.sql.DuplicateKeyException: DB2 SQL error: SQLCODE: -803, SQLSTATE: 23505, SQLERRMC: #XIR1N5J;000000030F.
2008-11-21 00:00:26 Error Returning to application. Exception: com.sap.aii.af.ra.ms.api.DuplicateMessageException:
Message ID 56149940-20b1-472f-0905-893a906a65cf(OUTBOUND) already exists in database:
com.sap.sql.DuplicateKeyException: DB2 SQL error: SQLCODE: -803, SQLSTATE: 23505, SQLERRMC: #XIR1N5J;000000030F

HI
I think there is some issue with your query. Its either updating the same field or database got some error.
Check notes 962578 & 831162
Thanks
Gaurav

SAP Java Connectivity Builder -NoClassDefFoundError com.sap.aii...Reference

Hi there,
I'm trying to generate Java Proxies for SAPJCO using the SAP Java Connectivity Builder (JCB). I got it from the NetWeaver 6.20 Release. The tool installs and runs properly but after putting in the connection properties and klicking "next", the application hangs. When activating System output, I get the error shown below.
I already tried to put all jar files contained in the C:\JBuilder5\lib\ext directiry into the classpath (but none of them contains the class mentioned).
Which is the right (standalone) tool for generating Java Proxies for a standalone Java application?
If it is JCB, is there a bug on the version I use (NetWeaver Release 6.20)?
Any help would be apreciated.
C:\JBuilder5>java -Dlog.handler.FileLog=FileHandler,log.txt -Dlog.logger.com=ALL,FileLog -cp lib/ext/aii_basis.jar;lib/e
xt/aii_ifr_core.jar;lib/ext/aii_ifr_jbtool.jar;lib/ext/aii_lcraccess.jar;lib/ext/aii_msg_runtime.jar;lib/ext/aii_proxy_g
en.jar;lib/ext/aii_proxy_rt.jar;lib/ext/aii_util.jar;lib/ext/aii_util_log.jar;lib/ext/lcrclient.jar;lib/ext/logging.jar;
lib/ext/SapIdeHelp.jar;lib/ext/SapIdeJBUtil.jar;lib/ext/SapIdeJspInsight.jar;lib/ext/SapIdeTaglibReflection11.jar;lib/ex
t/SapIdeTracing.jar;lib/ext/SapIdeUtil.jar;lib/ext/SAPJ2EEEngineJBuilderPlugin.jar;lib/ext/sapjco.jar;lib/ext/SAPmdi.jar
;lib/ext/servlet.jar;lib/ext/tc_sec_core.jar com.sap.aii.ifr.tool.jbuilder.JBuilderTool
#0 12:35:37 [main] DEBUG com.sap.aii.util.misc.api.AIIProperties: Initial AIIProperties
 com.sap.aii.client = true
#1 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.standalone" from "null" t
o "true"
#2 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.xml.parserFactory" from "
null" to "com.inqmy.lib.jaxp.SAXParserFactoryImpl"
#3 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.xml.transformerFactory" f
rom "null" to "com.inqmy.lib.jaxp.TransformerFactoryImpl"
#4 12:35:46 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.client.SAPNavigationPane: New file is C:\Documents and Setti
ngs\kalkoo1\Desktop\t.jar
#5 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Client : 010
#6 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Logon Name : kalkoo1
#7 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Password : #########
#8 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Language : EN
#9 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Host name: bgstsapedai01.s
t.behr.de
#10 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for System number : 20
#11 12:36:08 [AWT-EventQueue-0] INFO com.sap.aii.ifr.upload.client.R3LogonScreen: trying to establish connection
#12 12:36:08 [AWT-EventQueue-0] FINEST com.sap.aii.ifr.util.IdentityCheck: Looking up identity
#13 12:36:08 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.util.IdentityCheck: Results of identity check: isIFRServer: false;
isIFRRMIClient: false; isStandaloneIFR: true
#14 12:36:08 [AWT-EventQueue-0] FINEST com.sap.aii.ifr.util.IdentityCheck: Checking IdentityCheck.isIFRServer. Result: f
alse
#15 12:36:08 [AWT-EventQueue-0] INFO com.sap.aii.ifr.upload.sap.SAPConnection: connecting to system 20 on bgstsapedai01.
st.behr.de via JCo
#16 12:36:09 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.sap.SAPUploadSource: init MDI to System bgstsapedai01.st.be
hr.de (system=20, client=010) (BasisRelease: 620)
#17 12:36:09 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.UploadBuffer: new UploadBuffer
Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError: com/sap/aii/ifr/client/editor/Reference
 at java.lang.Class.getDeclaredMethods0(Native Method)
 at java.lang.Class.privateGetDeclaredMethods(Unknown Source)
 at java.lang.Class.getDeclaredMethod(Unknown Source)
 at java.awt.Component.isCoalesceEventsOverriden(Unknown Source)
 at java.awt.Component.access$100(Unknown Source)
 at java.awt.Component$2.run(Unknown Source)
 at java.awt.Component$2.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at java.awt.Component.checkCoalescing(Unknown Source)
 at java.awt.Component.<init>(Unknown Source)
 at java.awt.Container.<init>(Unknown Source)
 at javax.swing.JComponent.<init>(Unknown Source)
 at javax.swing.JTree.<init>(Unknown Source)
 at javax.swing.JTree.<init>(Unknown Source)
 at com.sap.aii.ifr.navigation.IFRJTree.<init>(IFRJTree.java:84)
 at com.sap.aii.ifr.navigation.IFRTreePane.buildPane(IFRTreePane.java:123)
 at com.sap.aii.ifr.navigation.IFRTreePane.<init>(IFRTreePane.java:33)
 at com.sap.aii.ifr.upload.client.SAPNavigationPane.<init>(SAPNavigationPane.java:43)
 at com.sap.aii.ifr.upload.client.SAPBrowser.setIsConnected(SAPBrowser.java:252)
 at com.sap.aii.ifr.upload.client.SAPBrowser$ConnectAction.actionPerformed(SAPBrowser.java:594)
 at com.sap.aii.ifr.upload.client.SAPBrowser$NextAction.actionPerformed(SAPBrowser.java:536)
 at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
 at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
 at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
 at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
 at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
 at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
 at java.awt.Component.processMouseEvent(Unknown Source)
 at javax.swing.JComponent.processMouseEvent(Unknown Source)
 at java.awt.Component.processEvent(Unknown Source)
 at java.awt.Container.processEvent(Unknown Source)
 at java.awt.Component.dispatchEventImpl(Unknown Source)
 at java.awt.Container.dispatchEventImpl(Unknown Source)
 at java.awt.Component.dispatchEvent(Unknown Source)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
 at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
 at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
 at java.awt.Container.dispatchEventImpl(Unknown Source)
 at java.awt.Window.dispatchEventImpl(Unknown Source)
 at java.awt.Component.dispatchEvent(Unknown Source)
 at java.awt.EventQueue.dispatchEvent(Unknown Source)
 at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
 at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.run(Unknown Source)

Hi,
>> Error :- java.lang.NoClassDefFoundError: com/sap/aii/security/proxy/KeystoreHelp
1) Can you check the class path you have mentioned is correctly
2) Setting of the Java in your system ( Desk top /Lap top ) check the Proxy settings
3) Re start the J2EE engine in the server
Regards
Agasthuri Doss

Call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException

hello
I am running an interface RFC2WS sync and recieve this message in the RFC. the message does not get out of the XI and rich the target (WS).
the XI been upgraded lately, and I think this might be the cuase to the problem, becuase the interface been worked before, and still working in PROD environment as is.
what could be the problem and how can I start investigate it to find the problem?
this is what the SAP recieves
call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException
Thanks
Kfir

Hi Kfir,
just check in RWB, in component monitoring, the status of integration server and adapter engine.......if it is red, then ask your basis guys to remove that error................just check your comm channels, i think your comm channels are in error, if they are just edit them, save and activate them again..........i think then your this issue will be resolved.'
Regards,
Rajeev Gupta

"call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryExceptio

Hello XI guru,
I am configuring RFC to File scneario where i am using BAPI as Source. When i run this BAPI in se37 it gives me short dump stating "call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException:
Please help.
Also I want to know is it necessary to write wrapper for BAPI before configuring. This bapi list all orders created in SCM system.
awaiting ur advises and help
Thanx
Anu

Hello guys,
I am sorry but kind of confuse, please be with me.
I have RFC with following structure:
'Z_BAPI_MOSRVAPS_GETLIST2'
importing parameters
 LOGICAL_SYSTEM = T_LOGICAL_SYSTEM
 START_TIME = T_START_TIME
TABLES
 PRODUCT_SELECTION = T_PRODUCT_SELECTION
 LOCATION_SELECTION = T_LOCATION_SELECTION
 LOCTYPE_SELECTION = T_LOCTYPE_SELECTION
 ORDER_HEADS = T_ORDER_HEADS
 OUTPUT_NODES = T_OUTPUT_NODES.
I put values in logical system/start_time/
product_selection/location_selection/loctype_selection
based on these values order_heads and output_nodes is populated. I want value of these to tables to be sent as file.
Data structure for file is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
- <ORDER_HEADS>
- <ITEM>
<ORDER_NUMBER />
<ORDER_TYPE />
</ITEM>
</ORDER_HEADS>
- <OUTPUT_NODES>
- <ITEM>
<MASTER_PRODUCT />
<MASTER_PLANT />
</ITEM>
</OUTPUT_NODES>
</ns0:ORDER_MT>
But the payload has value
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
remaining is not seen in sxmb_moni and payload cannot be read error is given.
file structure is dummy structure, please tell me know if it is right or i need to change.
Thanx
Anu

File to RFC - error while processing message to remote system:com.sap.aii.

Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.

Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek

Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550

Hi Experts,
We have many File to EDI scenarios wherein XI System pick up the XML and sent to customers via EDI. Recently we faced a problem so created a Back-up System (Production copy) and tested successfully. After sometime the messages were routed to this back-up system and when we notice it and then stopped the back-up system. All the messages that were routed to back-up system, we try to send the same messages from the actually Production system to our customers. Now the problem is XI system (Production system) is unable to pick these files and I check the communication monitoring and encountered the below error message.
Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550.550
Can anyone let me know how to fix the issue or what needs to be done?
Your help is highly appreciated.
Regards
Faisal

Hi,
It seems to be problem with permission of files. Please ask your basis to do following:
1. Set the permissions to FTP User you are using as 777 rights(full access to read , write and delete)
2.If you have access to PI server, try to telnet /connect to ftp using command prompt (open ftp .....) the FTP server form there, you should see the same error there , inform this to your network guys.
3.Clear all the files places already in the ftp (take backup) and test afresh after permissions are set by basis team.
Regards
Aashish Sinha

Error message "com.sap.aii.af.ra.ms.api.DeliveryException: "

Hi Team,
Created a simple file2file scenarion successfully. Unable to pick the file from Sender directory to Receiver Directory.
Checked from monitoring the Communication Channel.
Error message shown for sender communication channel as below:
Communication Channel Status   Short Log                                Control Data   Party Service           Adapter Type Direction
sen_cc                 Red ball Processing Errors In the Last 30 Seconds Manually             kanchuf2f_sen_bs   File         Sender
Line 1 / 1
By selecting the sender communication channel "sen_cc", below is the node details given.
Processing Details for Cluster Node Server 0 1_54295
Type
Time Stamp         Message ID                           Explanation
12/3/08 8:20:01 AM 45f841be-a421-43bd-235a-c7ad19b0aec8 Retry interval started. Length: 60.0 seconds
12/3/08 8:20:01 AM 45f841be-a421-43bd-235a-c7ad19b0aec8 Error: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:
By clicking on the first Message ID, The message says successful upto some point and give error says JCO COMMUNICATION FAILURE and RFC issue.
Below is the information provided in detail.
Audit Log for Message: 45f841be-a421-43bd-235a-c7ad19b0aec8
Time Stamp          Status Description
03.12.2008 08:20:00 Success Channel sen_cc: Send binary file "f:\xi_file\sender\f2fmap.xml". Size 210 with QoS BE
03.12.2008 08:20:00 Success Application attempting to send an XI message synchronously using connection AFW.
03.12.2008 08:20:00 Success Trying to put the message into the call queue.
03.12.2008 08:20:00 Success Message successfully put into the queue.
03.12.2008 08:20:00 Success The message was successfully retrieved from the call queue.
03.12.2008 08:20:00 Success The message status set to DLNG.
03.12.2008 08:20:01 Error Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:.
03.12.2008 08:20:01 Error Transmitting the message using connection http://sitaserv33:8001/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:.
03.12.2008 08:20:01 Error The message status set to FAIL.
03.12.2008 08:20:01 Error Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:
Page 1 / 2
I think this could be the problem with some basis related settings, I am not sure what exactly the issue with.
Any idea what exactly the error is talking about please do help me in finding the solution to thresolve this error message.
Regards,
Venkat Ramana K

Hi Carlos,
Thank you for the quick information.
Followed all the steps and also basis person from onsite restarted the XI server.
Now, I am able to log onto XI with the login Id but, when I give Tr Code: SXMB_IFR, unable to open the browser that shows Integration Builder.
Getting the error message.
*500   Internal Server Error*
                                                                                *SAP J2EE Engine/7.00*
**Exception**
*An internal error occurred. Contact you XI administrator*
*Unable to read configuration data (ExchangeProfile/aii.properties)*
Error Details, Error History, Build Info, Generic Application Info
Regards,
Venkat Ramana K

SAP R/3 - XI: Commit fault com.sap.aii.af.mp.module.ModuleException

Hi -
We have an integration setup between SAP R/3 4.7C and SAP XI -
It uses background queues - and in our development environment, on the call to XI, we are receiving the error message:
Commit fault com.sap.aii.af.mp.module.ModuleException: call to messaging
The queue then goes into SYSFAIL status.
This is occurring on all of our integrations between R/3 and XI - which has been previously working -
I have been working w/ our Basis guy & he said that all his checks to both systems look ok.
Do you have any pointers on what to look at or check out?
Your help is very appreciated!
Thanks,
Michelle

Hi Michelle,
Please check if the background Xi database to which your transactions are committed is full. In case it is, you would need Basis help to archive them, before you proceed. Please check your dump for the same.
cheers,
Prashanth
P.S Please mark helpful answers.

PI 7.1 and Oracle JDBC driver: missing com.sap.aii.adapter.lib.sda

Hello,
I want to deploy the JDBC driver for Oracle databases as described in OSS 1138877 on a brand-new PI7.1 (SP06 Stack) installation. Unfortunately, I can't find com.sap.aii.adapter.lib.sda on the system, so I can't add the ojdbc14.jar file and deplay it using JSPM.
Where can I get it from?
Thank you and best regards,
Herwig

hey,
The JDBC driver installation is different for PI 7.1.
The dowload/modify/deploy .sap.aii.adapter.lib.sda method was used in the earlier versions.(mentioned in the How to guides)
Look at the SAP documentation below -
http://help.sap.com/saphelp_nwpi71/helpdata/en/cf/128a42f802a01ae10000000a155106/frameset.htm
Arvind R

Middleware - SAP AII

Similar Messages

Maybe you are looking for