Midi an octave away on score from how it sounds
The midi I've recorded reads an octave higher in the notation than it sounds for one part. Any ideas?
Three things to check out:
1 - In the Inspector on the Arrange Page for that Track, select the Track and Region and look to see if it is transposed there (right under the name of the Region at the top) You could try correcting the transposition by putting it down an Octave
2 - In the Score Editor you may have the Score Style "Contra Bass" selected - this will play the notes where you hear them but transpose everything up visually as per the standard convention for bass parts
3 - Set the key command for Event Transpose +1 and Event Transpose -1. Then 'Select All' notes in the Region and count 12 transpositions with the appropriate Event Transpose ( the buttons + and - are great for this)
Message was edited by: musicspirit
Similar Messages
-
When I drag a loop into my arrange area, it no longer sounds the way it did in my loops menu.
Hi, do you mean song key wise not sounding the same? Then this might be the reason:
Also you might find some interesting facts over here:
http://help.apple.com/logicpro/mac/10/#lgcpd770ce07
Have a nice day! -
How can I find out how far away I am from my junct...
How can I find out how far away I am from my junction box?
My post code is KT198UB
If you find out is that a good distance?Jhey wrote:
According to SamKnows you are around 824 metres away, mine is correct at 100m.
Jhey, I'm very interested in knowing where you can get this distance from SamKnows becuase as far as I am aware this information is not held with the OpenReach databases and the only way you can find out exactly is to have an OpenReach engineer come to you home and measure it with the test euipment they normally carry. It's also not on the standrad screen they use for installation or testing either.
Infinidim
Megadodo Publications
Ursa Minor Beta
If you want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side
If the the reply answers your question then please mark as ’Mark as Accepted Solution’ -
I have a MobileMe account and have shared many MobileMe Galleries. MobileMe Galleries are going away in June. How can I share a photo album with others using iCloud?
The new ios version of iPhoto allows sharing. Here's a blurb from Apple's web site:
There’s the old way of creating photo galleries, then there’s the iPhoto way. Select a group of photos and iPhoto automatically flows them into a beautiful journal that’s fun to personalize and share online. Touch a photo to make it bigger or smaller. Or drag it to a different spot on the screen. iPhoto adjusts the page around whatever you’re doing, so your journal always looks great. You can even add captions, maps, dates, and weather — giving family and friends the big picture at a glance.
More things you can do:
With iPhoto, there’s more than one way to share a photo. Post pictures directly to Facebook, Flickr, or Twitter. Play an impromptu slideshow on your iPad or iPhone. Or stream photos to your HDTV to give your big moments room to shine.
I have not used ios version of iPhoto to share "journals" and I'm not sure this is part of iCloud or not. You'll have to do a google search on "ios iphoto" and read up of this journal thing. As far as I know, this is the only way of sharing photos. I'm not sure whether other friends use a browser to view these journals or whether they need something special. Any way - search around to find answers. -
I blew away my calendar. How do I get it back
I blew away my calendar. How do I get it back
Either turn it back on and sync it from whatever source you were previously syncing with or restore from you backup. If you're not syncing with something, via iTunes or OTA, you should be.
-
2 midi export-import problems...from l8 to l8!
1. l8 always exports/imports midi regions as their own tracks. the preference for "export single regions as type 0 files" is different from how it worked in l7 (1 track with several separate regions exported/imported as 1 track). when exporting an entire sequence to midi, this preference now makes no difference whatsoever. annoying.
2. markers with text (lyrics, for instance) don't survive the import/export process. hardly surprising, i suppose. the markers themselves are there, but not their names, or the info contained in them. instead, you get a marker that looks like html/xml? it apparently references an rtf file, and shows font/color info. the actual marker start/end time values are correct, however.
grrrr
can anyone confirm, or know of a workaround?
Message was edited by: kelldammitAre there any free alternatives to Emaichemy to handle importing from Thunderbird to OS X Lion Mail?
I'm also having a problem importing from Thunderbird, but in my case the folders are importing but I'm only getting one message per folder. This was reported in another forum for an older OS X version (apparently Apple never fixed the problem), and the solution there was to use a utility called Eudora Mailbox Cleaner. Unfortunately, this utility does not run under Lion.
What I'm really trying to do is get local mail folders migrated from Zimbra Desktop to Mac Mail. There was no direct way to do this, because Mac Mail doesn't support Zimbra Deskop, and ZD can't export to an mbox file (it exports to eml format). However, Mac Mail "supports" importing directly from Thunderbird, and Thunderbird can import eml files using an add-on called ImportExportTools, so I installed Thunderbird, installed the add-on, imported the exported data from ZD, and that successfully brought my local mail folders into Thunderbird. So far so good. Unfortunately, when I tried to import from Mac Mail directly from Thunderbird, it imported all the folders, but just one message from each folder.
I also tried using the Thunderbird ImportExportTools add-on to export the folders, thinking it would generate mbox format. I was able to import that data using the "import from mbox" option in Mac Mail, but I got the same result -- all my folders came in with a single in message in each.
Any other suggestions? This is a one-time thing, I don't want to spend money on an application if I don't have to. -
How to retrieve data from a ticking sound HD?
Hey Folks.
Here's how's it all started: http://discussions.apple.com/message.jspa?messageID=8353054#8353054 I turned on my computer 3 weeks ago and saw a folder with a ? mark.
So I took it in the Apple store and the HD got replaced, now the data on the old hard disk is with the tech guys trying to retreieve the data off of it. But when I spoke to him yesterday he told me there is a slim chance to retrieve the data <edited by host>.
So I'm asking you gurus is it likely to retreieve the data from a ticking sound HD? I really need the stuff I had on my old hard disk there are so many photos of me travelling the world and just so much memories, it would really be a disaster if I lose all of that
To make my story even worse, when I backed up all my images on my external hard drive, I was flying back from Canada to Dubai, and I had my luggage stolen with my hard disk and 2 blackberry bolds, so Im really out of luck
PLZ HELP!
Thanks.
-JoeyA couple days ago I contacted DriveSavers.com and she quoted me the following;
-SERVICE OPTIONS AND PRICING
Our pricing is based on the drive capacity, the operating system and
turnaround time. The final cost is based on the complexity of the
recovery and the final recovery results.
The data recovery estimate for the 120GB Hard Drive you described is:
• Standard Service (1-2 business days): $900-3900 (successful
recovery will fall between $2800 - $3900)
$200 attempt fee if the data is unrecoverable
• Economy Service (5-7 business days): $500-2700 (successful recovery
will fall between $1800 - $2700)
$200 attempt fee if the data is unrecoverable
• Priority Service (24 hrs. / 7 days a week): $1800-8900 (successful
recovery will fall between $7900 - $8900)
$800 attempt fee if the data is unrecoverable
Please Note: DriveSavers will never exceed the amount quoted.
That's nuts. Im ganna try my luck with DRD.ae in Dubai and see how much they charge, let me give them a call now and will post a comment in a bit.
-Joey -
Is that possible to report score from a selected set of questions in a quiz?
Hi I am new to Captivate and SCORM. I've been reading the forum discussions and Lilybirl's blog, and learned a lot in the past few days. I wish someone could help me with this too:
We hope to design a course within a single captivate project which allows the following functions:
There are several pre-tests and one post-test. The scores from each pre-tests will be used for branching purpose. See, if one takes pre-test 1 and passes, then she will go to lecture 2; otherwise goes back to lecture 1; if one takes pre-test 2 and then passes, then she will go to lecture 3; otherwise go back to lecture 2; same for pre-test 3, 4, 5, .... Now I know that I can use a customized variable to realize this part. I can create a user varaible as pretest_score, and set it as 0 at the beginning of each pre-test; let it do the math everything the learner answers a question slide. Then at the end of each pre-test, jump based on the value of the pretest_score. Then for the post-test, the pretest_score will be set as 0 again, and the culculation will start from 0. It will also generate a customized report page to report scores on each pre-test and also on the post-test.
However, we wish to be able to pass only the final score on the post-test to the LMS. Since I read that most of quiz variables are read only. Is there any way I can get around this? Is there something in the SCORM package that I can change to the variable that I created so that I can pass this variable's value to the LMS?
Any suggestions would be very helpful.
Thank you very much.Hi,
I do not describe it in the blog posts, but you could also set the scores of the pretest question slides to 0, and track those scores only with a user variable and advanced actions. That way the total score will have only the scores of the final test, where you attach score to those question slides. Only one annoying thing: the total number of questions will have all the questions included, same with the number used in the progress indicator. You'll have to avoid showing those numbers to the user, but if you can live with that, could be easier than to create custom question slides.
Lilybiri -
Just purchased a USB Super Drive but unsure how to use it - o instructions provided apart from how to eject a cd. Each time I put in a cd it just ejects it again.Can anyone help.
USB is rarely bootable under Mac OS X and PowerPC Macs. Get a Firewire Superdrive from http://www.macsales.com/ if your intent is to boot the machine. PPC, which is PowerPC, indicates the Mac predates 2006.
-
I have some my violin recorded audio files and want them to be converted to printable notation throw "audio to score"from Factory. But do not have a normal result. Could someone help me, please. .
seeren wrote:
Normal result is on the sloppy side of inaccurate.
Wish I'd started this topic so I could give you a green star!
Great description. -
Requesting Windows Experience Index scores from anyone running WIN 7 on either current-model 13" MBPs... Thanks!
Hi mchainmchainmch,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Unable to download/preview sounds or scores from Resource Central in Soundbooth CS5
I'm trying to download sounds and scores from Resource Central in Soundbooth CS5, but I get the following errors numbers:
(404) Error:0 when trying to download
(0) ioError:-1 when trying to preview
However, the online indicator is green and I am still able to view and search through the list of sounds/scores, so I am not sure what is causing the errors to occur. This didn't happen to me until after the start of May 2013.
I've tried restarting Soundbooth, but the problem still persists.
I'm running Soundbooth CS5 on 64-bit Windows 7.It is probably simply gone. SB has long been deprecated and "start of May" sounds exactly like the files simply went offline. Haven't seen any announcements on that, but I'm sure they exist somewhere...
Mylenium -
I want to upgrade my mid 2010 17" i7 MacBook Pro from 4 to 8 meg. However, no memory is available. What should I do?
Welcome to Apple Support Communities
The Mid 2010 MacBook Pro supports 8 GB of RAM. You can buy RAM at OWC or Crucial > http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3
As your MacBook Pro has got two slots of memory, you will have to replace your actual memory and install two slots of 4 GB. Follow these steps > http://support.apple.com/kb/HT1270#link6 -
Can I erase my temple run score from game center?
Can I erase my temple run score from the game center?
Thanks for the help. I deleted the game and removed it from game center. I reinstalled it and when I went to game center it showed my previous score. Is there any other way to remove the score or reset my game center stats?
-
To change my computer score from 3.4
I looks like I need to change my graphics score from 3.9 and my gaming graphic score from 3.4 what can I do?
I would to add a2nd cd-dvd burner to my computerlenovo iideacenter k 210 computer? what should I go with?Have a look at this reply to my post on a very similiar subject, see if there are any answers there.
http://forums.lenovo.com/lnv/board/message?board.id=H_Series_Lenovo_3000&thread.id=1645
dlfetters
Maybe you are looking for
-
Hi, I want to center my Jlist item instead of leave them in the left like usual. My List contains pictures and for the beauty of the design it's better to have the image in the center of each cells. How to do it? thanks.
-
How to send only email from workflow
Hi Guys, I want to send an email from a workflow without sending a notification ... how do i do it ? Thanks In advance Tom.
-
The lock switch is not working anymore
The lock switch on my nano doesn't work anymore, it's really annoying since I can't walk around with it in my pocket without the sound getting turned up or the song switched every time i move. Also, since the lock isn't working I can't turn it off pr
-
ERROR: Context Value Management Failed
Hi, While running autoconfig, i am getting below error ================================= ./adautocfg.sh Enter the APPS user password : Context Value Management will now update the Context file Exception in thread "main" java.lang.NoSuchMethodError: o
-
How to implement a help feature in iView Tray
How to implement a help feature in an iView Tray?