Midi and audio tracks are not synchronised properly?

no problem for a year and then after synchronizing my old Roland VS 880 in order to transfer audio tracks to a new project in my mac all new audio recordings run out of sync with the midi percussion tracks. They move along together but not quite in sync. It sounds as though the guitar parts have been badly played but believe me that is not the case.

Good question. I don't know. If the sampling frequency changed it did it on it's own because I have never even come across that before. I am going to look around logic to try and educate myself but so much time has been lost already I am at my wits end. We couldn't talk could we? Are you with skype?

Similar Messages

  • Video & Audio Tracks are not connected

    For some reason my video and audio tracks are no longer conneted. It used to be when I would click on the video track that the 2 audio tracks that match it would also be highlighted so I could move them together, trim them together, etc. but for some reason now all my video clips that I put on the timeline are seperate (1 video and 2 audio) so I have to highlight all 3 lines to have them stay together, and it will not let me trim or apply transitions to all 3 at the same time. Is there a setting for this?

    Make sure the "Link" button is on-- it's the small chain at the top right of the timeline, next to snapping. Once turned on, though, your clips already on the timeline may still lack cohesion; if so, select a video clip and the audio clip(s) that you want to link, and go Modify>Link.

  • Midi and Audio tracks simultaneously armed for recording

    All, whilst engaged in laying down the bass track for the guitar solo section of my latest monster his, I encountered one of those sorts of frustrations that makes one long for some means of swift egress from this mortal coil, this vale of tears: that is, while laying down my totally awesome bass track that when they hear it will send JP Jones and Boosty Collins to employee as actuaries, I kept getting the hateful "unable to synchronize the audio and midi error." I'll spare you the catalog of the various lame attempts I understood to remedy this problem, as well as the curses directed toward my fate, and Daw ineptitude in general. Then I nnoticed that both the software instrument tracks (Addictive drums) and the audio track (aforementioned bass) were both armed for recording, signified by the red R in the track header! Well, upon de-arming the software instrument track I was able to record by bass line in a mimimum of takes, and as visions of illegal intozicants and comen of questionable morals dance through my noggin as recompsense for my trouble, with to make the point to all relative newbies such as myself that the answer to problems that seem on surface intractable as usually staring you right in the glazed eyeball.

    What?...
    I'm sorry maybe I don't understand everything you are sayng... but I can replay to the titles of the Topic!
    Actually recording a MIDI instrument and an Audio Track symultaneously comes with serious bug!!!
    you cannot use Punch-in on Fly when an Audio and instrument track is armed at the same time...
    or better you can but the MIDI and audio output will be dropped for a moment
    Provide a Logic feedback
    http://www.apple.com/feedback/logicpro.html!
    THIS IS A LOGIC 8 BUG!!! BIGGEST SERIOUS BUG!
    I suggest you to use Logic 7 when you need that!
    Thank you so much for remember me this..
    I'm sorry no alternative solution... or.. if you have 2 Macs you can use one for Logic MIDI and another one for Logic Audio!
    G

  • Midi and audio regions are getting moved

    Hallo... I am working on my arrangement on Logic Pro 9.1.8.  I have many midi regions on a few tracks.  I added a few audio tracks and started to slice them and reversed some parts.  (I also played with new key commands)  Now all the regions on each track (midi and audio) seem to be tied up.  When I delete one region all the others (on this track) shift toward its position.  Why does it happen? 
    (Locking SMPTE position partly helps but I would like to have access and be able to edit the regions).   Any help would be appreciated.

    Sounds like you've got your drag mode (upper right of arrange) set to one of the shuffle settings.

  • Song tracks are not downloaded properly from iTunes Store: they are not added to the playlists, and eat disk space

    Hi,
    Yesterday I wanted to upgrade my wife's iPhone (5, 16 GB) from iOS 7.0.6 to iOS 7.1.
    She had only 500 MB of free space, and 1.9 GB was needed, so I decided to temporarily remove a number of songs from her music library.
    After this operation there was 2 GB free, and the upgrade went successfully.  After the upgrade there was still 2 GB free.
    Then I wanted to download the songs again, and here something went wrong:
    I went to iTunes Store > More > Purchased > Music, and clicked on "Download all".
    When the download process was completed, there was about 500 MB free space, but I noticed that some of the tracks, and even a complete album, were actually not in the playlists; in another album only one of the 30 tracks or so was downloaded.  So I went again into iTunes Store > More > Purchased > Music, and indeed some of the tracks were still marked as "to download", with a little cloud in front of them.
    When I tried to click on one of these little clouds to download a given track, the track seemed to be downloaded, but as soon as the download was finished the little cloud reappeared again, and the track wasn't added to the playlists.
    I tried to repeat that process a few times, until I noticed that there was now only 90 MB of free space.
    I then tried to download one more track that was 10 MB large, and after this there was only 80 MB of free space.
    So it seems that the tracks are indeed downloaded (and downloaded again if I click again on the little cloud) in a place where they use disk space without being otherwise accessible.
    What can I do to:
    1. download the tracks correctly so that they appear in the playlists?
    2. clean up the space that was wasted?
    Many thanks in advance!

    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those tracks and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, 24 to 48 hours).
    Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

  • Audio Tracks are not linked when imported

    I know I recorded in stereo so I don't understand why the audio pair I imported are not linked(2 mono tracks) in the timeline. Anyone know how to fix this?
    Adam

    There is no panning in stereo pairs. That's the way it works. You can't have separately panned tracks and still have them be stereo pairs. FCP works the same in this regard. If you captured in FCP as a stereo pair, the panning would be as you see it in FCE.

  • Audio tracks are not nesting

    So all of a sudden, when I select the audio and video clips and right click > Nest....only the video tracks are being replaced by the nested sequence on the timeline while the audio clips stay intact on the timeline.  When I look at the nested sequence all the audio clips have been copied there. 

    Ok, I'm officially upgrading this bug. Now, in Adobe Premiere Pro CC 2014, when I use the "Nest" command I get the same behavior as mentioned above. Except now when I drag the nest into a time line, it acts like the nest is not there and instead drags all the tracks in (6 tracks). Even if I try to drag a sequence into another sequence, it instead drags it in not as a nest, which is something I definitely do every day in CS6, but instead as all the separate tracks.
    At this point, I'm starting to feel a bit like a beta tester on an unreleased product. Just a few more of these bugs and I'm going to have to go back to "last years model" CC until an update for 2014 is released.

  • Display has white and grey lines and blocks crisscrossing it and touch functions are not working properly on half the screen.

    I dropped my iPhone 5S and it landed flat on it's face (it was in a protective case).  Since then my touch screen display is not working properly. I have white and grey lines and/or blocks crisscrossing the screen both horizontally and vertically.  Screen responds to touch in odd random ways, but rarely does what I am trying to do.  Can't call or receive calls because can't dial or answer phone via swipe. Can't text or read incoming texts. All functions seem to be working except that I can't access them because the touch screen is acting up. If I move the phone around it randomly accesses different apps or functions, but I have no control over them once the appear on the screen.  Touching screen just causes phone to randomly choose something else to open.  What have I damaged?

    Shanegang77 wrote:
    What have I damaged?
    We cannot possibly tell. Obviously some hardware inside. Take it in to an Apple Store. They will offer you the opportunity to swap the phone for $269 in the US. Prices vary by country.

  • Logic Pro 9 When I open a file which contains a composition of many midi and audio tracks, no sounds play or some tracks are playing the wrong sounds. The project was working perfect when it was saved and closed down.

    Does anyone else understand what is happeneing, its like all the tracks and plugins are confused and are playing all the wrong sounds if at all. I've checked the audio setting which seem fine but cant understand where it all goes horribly wrong.  Thanks

    Is it just a Logic problem; can you for-instance play audio in iTunes trough the Tascam? And what about new projects; you get audio there?

  • Global Track - Chords (Only selected Midi and Audio Tracks)

    I am looking to have only certain Audio/Midi tracks be trsposed when there is a change of chords in the Global Track section. For example, I am going C/Am/C. At the Am point, everthing (exclusing drums) gets transposed, even the Melody parts. Is there any way to select only the tracks that I want tranposed?
    Or is there a better way of doing this. Appreciate the help.
    Rgds
    Mark

    Hi Again
    I tried it out today and on the Midi tracks I found the no hassle in ticking the non transpose button. Worked great.
    On the audio loop tracks I could not find the no transpose option in the inspector. Appreciate your assistance.
    Rgds
    Mark

  • Tracks are not named properly -- shifted ...

    Some, not all, of the albums I've loaded have the track titles shifted, so that, say, track 1 has the title of track 2; track 2 has the title of track 3, etc.
    What causes that and how do I prevent it?
    Many thanks!
    S

    Good question. I don't know. If the sampling frequency changed it did it on it's own because I have never even come across that before. I am going to look around logic to try and educate myself but so much time has been lost already I am at my wits end. We couldn't talk could we? Are you with skype?

  • Web service proxy and data control are not working properly

    Hi,
    I am working on jDeveloper 11.1.1.6
    I have a SOA web service which requires 3 inputs and return with a set of data.
    When I tried testing that web service in soapUI it is working perfect. But when I have created a web service proxy in my application and trying to test it from class (*******_ptClient) main method everytime it is replying with the output null
    Also When I am requesting from the main method SOA is getting proper input (which I am providing in the main method) and SOA is returning proper output I have checked the SOA instance in em. So there is no problem in SOA side.
    After that I have created web service data control and tested in that case also it is not showing any result.
    What could be the problem ?
    Please help.
    Thanks
    --NavinK                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Hi Shay Shmeltzer,
    Thanks for the reply.
    I tried in HTTP Analyzer in JDeveloper and there also it is not working. My concern is :-
    There are many other web services deployed on the same SOA server in same partition and they are working fine in HTTP analyzer and I am able to create and use the web service proxy as well. So as per my understanding there is nothing like network issues between SOA server and jDeveloper.
    1 more thing When I am creating the proxy for this web service and requesting from the proxy's main method SOA is getting proper input (which I am providing in the main method) and SOA is returning proper output I have checked the SOA instance in em. So there is no problem in SOA side. The problem is jDeveloper is not able to get back that response which SOA is returning.
    Please Help.
    -- NavinK

  • Japanese and Russian characters are not displayed properly

    I have a pdf file which has both russian and Japanese characters in it. Before I install Japanese font pack, the russian characters were displayed properly but for Japanese characters Junk characters are displayed. But once  I installed Japanese font pack, Japanese fonts are displayed properly, but for Russian characters are displayed as junk characters. Please let us know if can display both font types simultaneously in a document or is there any work around for this ?

    What is your Reader version?
    If Reader X or earlier, did you also install the extended font pack?

  • Why Don't Midi and Audio Tracks Stop Playing When I hit Pause or Stop

    I'm using Logic Express 8.
    This could be a preference corruption issue, but I'm not sure. When I play on the keyboard or from within the application the notes continue to play even when I hit stop or pause. This doesn't always happen, but I'm wondering what causes it.

    Hi,
    are you clicking with the mouse or hitting spacebar? Does is work with the second mouseclick?
    The first mouseclick into a non-active window doesn't do anything but brings this window to the front. The second mouseclick then should do the job. The same applies to the spacebar: It only affects the application currently "in front". This is especially true if you have the sample-editor open, and the stop command only stops the sample playing but doesn't stop the arranger.
    Fox

  • Unable to authorize user using AccessControlService and user.roles and user.privileges are not set properly

    Hi,
    I am trying to enable/disable a feature based on user.roles.
    Added a constraint for that feature as below,
        <adfmf:constraints>
          <adfmf:constraint property="user.roles" operator="contains" value="manager" id="c1"/>
        </adfmf:constraints>
    In this case, Users have manager role should be able to access this feature.
    My AccessControlService response is
    {"userId" : "sales_mgr","roles" : [ "manager","MOO_OPPORTUNITY_SALES_MANAGER_DUTY","ZBS_ENT_SALES_MANAGER_DUTY"],"privileges" : [ "managerPriv","ZSF_DEFINE_SALES_FORECAST_PRIV","MOO_MANAGE_OPPORTUNITY_GROUP_SPACE_PRIV"]}
    Repsonse has "manager" as one such role.
    After adding constraint to the feature, am unable to access it.
    I tried many possibilities like  operator="contains" or "not" or "equal", but no use.
    I don't know what is going wrong. Appreciate you help.
    Thanks.

    If you are on 11.5.10 or greater or standalone 2.6.4 if you pass the responder value to wf_notification.respond API it should be updated in wf_notifications.responder column. The comments is now updated in wf_comments table against the notification id and not wf_notifications.user_comment column.
    Thanks, Vijay

Maybe you are looking for