MIDI CLOCK stopped working and I can't figur this one out.

I have been sending MIDI clock to my Native Instruments Guitar Rig so I can sync the Loop Machine with Logic, everything was working pretty good till...??? I am not sure what I could have done to goof it up but now I get no MIDI signal out the port ( I set it to all MIDI ports). I tested the cables with a LED tester and all the settings I set to get it working in the first place but now Logic seems to not be sending the clock any longer. I also sync a Micron keyboard and use its arpegiator... well I was till this happened. Anyone have any ideas?
Thanks!

Hi,
Delete Logic preferences from the user>library>preferences folder
(export your key commands before deleting)
G

Similar Messages

  • I can't figure this one out...

    I've imported a .swf file into one of my table cells. The
    cell is 700x200. The .swf file is 700x200.
    http://www.associatespd.com/CHSA_Web
    I've recut and resaved my .psd file TWICE. I can't figure
    this one out.
    It seems that the flash file is stretching or something, its
    off one pixel on the right. When i set my flash file at 699 width,
    it was one pixel off on the right.
    Can any offer any suggestions. I'm completely out of ideas.
    Thanks in advance.

    Ally86 wrote:
    > Okay, so I have great vision. But what's the fix? The
    suspense is killing me!
    >
    > My logic is saying that since your graphics is off in a
    precise pattern, and
    > only in your Flash object, that it was moved somewhere
    in the flash file
    > itself. So it would make sense that it would line up if
    you replaced it with
    > the original image (if the problem is in the flash, not
    the table).
    >
    > In my mind, I imagine your flash includes half of the
    text graphics, cut off
    > at that horizontal split - since your movie loads in
    only part of the screen.
    > Maybe I'm beating a dead horse, but double check the
    layer (in your .swf file)
    > that your lettering is in for that eagle-eye split.
    >
    > If it's there, just move the second half over. If it
    can't be seen in the
    > flash, I promise I'll shut up. Just humor me, pretty
    please . . . (I have a
    > sneaking suspicion you're willing to try anything)
    >
    it looks like the graphic's width might have been transformed
    at 101% in Flash.
    If the actual image file has the right width, I don't see any
    other possible explanation.
    You should double check in Flash authoring, select your
    graphic (or your MC or whatever object you
    might have converted it to) and open the transform and/or
    info panel. One of these panels will show
    you the % width and height ratio of your object...
    seb ( [email protected])
    http://webtrans1.com | high-end web
    design
    Downloads: Slide Show, Directory Browser, Mailing List

  • HT3235 My second monitor is working but I can't figure out how to use it! I can't get anything to drag. I know how to adjust extended desktops on PCs but I can't figure this one out.

    I am used to working on duel monitors. I bought a new MacBook Pro 15' yesterday, the adapter for my monitor, and the monitor is on with the generic background but I can't drag any windows over to it. I can do it on PCs but can't figure out on the Mac. Can someone please help the noob out?
    Thanks
    Nikki

    The blue blocks in that screen are Icons for your actual screens. Their sizes are proprtional to the number of pixels in each screen. They can be dragged to new locations relative to each other -- as long as they are touching at some point.  You are expected to drag them so that they correspond with the actual screen location on your bench, so that the movement from one scrren to the other is intuitive.
    The white stripe represents the menuBar. It can also be dragged to any screen, and that screen will then be the one with the MenuBar. It will also become the screen with the Startup icons on it.

  • Can't figure this one out! CS4

    http://dougcabot.com/1.fla
    (13mb file)
    I'm trying to understand why, in the Flash project above, I get an odd discrepancy between the project as it appears on the Stage, and the version that exports as a SWF.
    Here's a description of the problem, though you might find it easier to simply look at the problem, in the blue bunny's legs, for yourself.
    I'm animating two characters originally drawn on paper by my daughters, age 4 and 3. The blue bunny character's legs are graphic symbols ("L/R leg squeeze") with a motion tween applied to them, an x-scale transformation, occurring only once per 30-frame bounce cycle.
    However, up a level or two at the "lyda armature bounce" symbol, the same transformation unexpectedly occurs three times over the same 30 frames -- seemingly tied to the "pose" keyframes. You can't see this mysterious effect except in the blue bounding box that you get when you select a leg.
    If anyone could explain this problem, I'd be grateful. Maybe something to do with my IK armature and the fact that within it, I have moved its component graphic symbols (all of them except the legs) to match the embedded leg-squish animation?

    Pseudo-classes and container styles are what you need - here
    are some
    tutorials.
    http://www.thepattysite.com/linkstyles1.cfm
    http://www.projectseven.com/tutorials/pseudoclasses/index.htm
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Jane Smith 2300" <[email protected]> wrote
    in message
    news:gmifle$5nt$[email protected]..
    > Further to my query, I found this article which suggests
    the following:
    > CSS Styles are a simple and fast way of making your site
    look good. In
    > this
    > tutorial you will learn how to make cool text rollovers.
    >
    > The trick is to use the a:hover style! If you work with
    Dreamweaver the
    > steps
    > to follow are given below:
    >
    > 1. In your style sheet choose New
    > 2. Next choose Use CSS selector
    > 3. In the drop down menu choose a:hover
    > 4. Finally, Define your style. You can choose your font,
    color, bold,
    > underline etc.
    > 5. You're done it! It's easy and fast and really cool!
    >
    > My problem is that where is the "Use CSS selector"
    option.
    >
    > I tried going under the CSS Styles panel and choose NEW
    RULE, but I don't
    > see
    > the option mentioned above. Am I starting in the wrong
    place?
    >
    > Jane
    >

  • Problem with an HTML snippit and PayPal button - cant figure this one out?

    Hello Mac people. We are really good with these things but this one has got us completely foxed.
    We've done a tribute website in iWeb 08 for a friend and his family that were tragically murdered in November 2006 - the address is www.yemi.co.uk
    We are trying to add a PayPal Donate button to the Charity Page.
    Simple right? We went to our PayPal account, set up the button, previewed it (perfect), copied the code, pasted it into an iWeb HTML snippet window, clicked Apply and the PayPal button appeared on the page... Great, thats sorted right? Nope.
    What happens after we publish to our .MAC account is that the PayPal button, when clicked, tries to load the entire PayPal page into the frame / area within the actual PayPal button, which is a tiny, on the iWeb page.
    What we want it to do is just link to PayPal in a new window.
    Tried everything we can think of to solve it including PayPal technical service, .MAC assistance etc... 3 days later we admit defeat!
    Anyone have a clue what we've done wrong? Much appreciated.
    Regards from the UK
    [email protected]

    Hi, just a quick update. We managed to solve this one by adding this to the first line of code that PayPal generates after it has been pasted into the Snippit window: target="newFormWindow" - it forces the page to open in a new window and gets round the problem we were having.
    Hope this helps somebody else out in the future. Thanks.

  • Help! WiFi has stopped working and I can't figure it out.

    Greetings all,
    I have a Time Capsule, an Airport Express, a 24-inch iMac, an Apple TV and on old iMac. The TimeCapsule is in the middle of the house, the ATV and old iMac are in the family room and the Express is nearby. That part of the network works fine.
    The 24-inch iMac is in an upstairs office. Last night I literally moved it a few feet to a new location and now it won't connect. When I run the Airport utility, it can't detect any wireless devices. Nothing.
    Any help?
    Regards,
    Peter

    Greetings all,
    Never mind. I solved the problem another way. (Bought a Netgear XAV101 Powerline AV Ethernet Adapter, if you care.)

  • Can't figure this one out - Buddies all grayed out - show offline.

    Just helped setup a new Mac convert and I am at a loss to get his iChat to connect. His new broadband connection is Cox cable using a Scientific Atlanta DPC2100 Series. Web browsing is good and fast. When I carefully set up his Buddy list, and have the iMac firewall off, the Buddies remain greyed out even when we confirm by phone that they are online. They also show him as greyed out on their iChat. To simplify, I disconnected my Powerbook with iChat, iSight, etc. all working perfectly from my DSL connection. I then carried and connected to the DPC2100 directly with Ethernet and confirmed web browsing. But, my iChat did the same thing, showing Buddies greyed out and offline and they could no longer see my presence online either.
    The only variable seems to be the switch from DSL (ok) to Cox Cable with the DPC2100. Then, returning to the DSL all is fine.
    I discussed this with Cox ??tech support?? and two different people said it had nothing to do with the cable modem or their connection. It appears that expecting ANY support from COX cable tech is a losing proposition, so I am turning to logical Mac users. Thanks for any ideas to resolve this.
    iMac 1.8 G5 and Powerbook G4   Mac OS X (10.4.4)   no router, no firewall, no privacy, etc.

    I would look for a cable Modem that is configurable (most you purchase youself will be).
    Something like this
    Or this
    Generally go for something that is not going to handle VoIP as well. (Not SIP Aware)
    On the other hand if he has a install CD that came with the device there might be Read Me with the default IP Listed to make Access.
    Or try the Scientific Atlanta Website (although I can not get the page to load today (Sun 22nd)
    This Forum item suggest the default IP is 192.168.100.1 but also suggests problems due to the ISP this was supplied from.
    Ralph

  • Icon, icon, i can't figure this one out!

    After working on my G5 for a few hours after a restart, I find unusual things happening to icons. The Desktop icon (shown in the side pane) is the most susceptible; becoming garbled or taking on another program's icon.
    It always goes back to normal after a restart, but I'd like to fix the problem not the symptom.
    Any help?
    Here is what it looks like:
    http://web.mac.com/jetalcott/iWeb/JET/Problems.html
    Powermac G5, Powerbook   Mac OS X (10.4.8)  

    As I fiddled with the suggestions here, I noticed something I should have seen earlier. Although my desktop icon appears in the sidebar, the folder does NOT appear in my home folder. Spotlight says that it is there. My desktop is working normally (things appear on my desktop, and they are the same things that show up when I click on the icon in the sidebar), but I cannot actually see the desktop folder. I thought I would try changing it's icon, but alas, it aint there!
    Hmmmm.
    Any ideas?

  • Help me please, I can't figure this one out!

    Alright so I just got a Ipod Video 5th Gen and I also have a mac. The ipod came formatted for windows and when I hooked it up to my mac, itunes wouldn't recognize it and ipod updater wouldn't do anything with it where it would recognize it but it would say that it can't restore it or update it. My mac doesn't have an internet connection at the moment but I have ipod updater 6-28-06 on it along with itunes. I have tryed restoring it on a regualar windows computer but I Couldn't change the format. How do I change the format to Mac? Any help is appreciated.

    See put your iPod into disk mode before doing the Restore helps
    Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    Otherwise, For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Eject your iPod and do a Reset

  • My Ipad2 has started adding letters between words when I type.  The letters are usually, but not always, m.  I use Safari browser.  Can't figure this one out!

    Adding to the question I posted, my iPad will string words together by inserting letters (usually m, but sometimes n) between.  Even when I back up and delete the extra letter, it will pop up again until the second delete.  So it's in autocorrect?  Have I taught my device to do this by being a sloppy typist?

    Try asking in the iPad forum. This forum is for iPhones being used in an Enterprise (corporate) environment.

  • I was using my wifi last night when I got an error message stating my ip address had been taken over.  Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

    I was using my wifi last night when I got an error message stating my ip address had been taken over.  Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

    Sounds like a bogus pop up. In any case power down your Mac, your modem, your router. Then power back up in 1 minute sequence; modem, router, Mac.

  • Elements 11 on macbook pro has stopped working and i can't re-install as its no longer available?

    Elements 11 on macbook pro has stopped working and i can't re-install as its no longer available?

    Further info:
    Running on a macbook pro.
    Purchased through the apple app store.
    Worked fine prior to mavricks update.
    I have read where others have had this issue, the general response has been that they have had no support from adobe in resolving the problem. One guy said he managed to get issued a new download of the softwear that works fine with mavricks.
    so there is a fix avalible but for some reason its not been a general update for all customers with premier elements 11?

  • TS1398 My Wi-fi on/off button in setting has stopped working and I can't even attempt to find anything does anyone know how I can fix it?? I've already reset the phone setting, network and factory settings

    My Wi-fi on/off button in setting has stopped working and I can't even attempt to find anything does anyone know how I can fix it?? I've already reset the phone setting, network and factory settings

    can you see the wi-fi address in the about? if it show N/A, your iphone needs to be repaired.
    if your ios is 5.1.1 or you can see the wi-fi address,you could try to  connect your iphone to the itunes to restore and update.

  • File - Create PDF Portfolio causes Adobe Acrobate 9.0 to stop working.  How can I fix this?

    File -> Create PDF Portfolio causes Adobe Acrobate 9.0 to stop working.  How can I fix this?

    Have you done the updates to AA9? It is currently at 9.5.5.

  • After downloading IOS6 my shorcut text messages stopped working.  how can i fix this?

    after installing IOS6 my text messaging shorcuts stopped working

    Hi, I have an Hp pavilion laptop . My cooling fan has stopped working. How can I fix this problem?

Maybe you are looking for