MIDI command sets

I've been working out a way to remix live with logic, and only two things stand in my way. Every time I make a key command on my controller for a mute button, I always have to push the button twice to go from "mute" to "unmute" and vice versa. I can get it to work properly if I put in the command twice, but is there a way to only put in the command once and have it work properly?
My second problem: I need separate key command sets for my MIDI controller in each song I do, but every time I make a new one, the commands continue into the next song, so basically it reads the key commands for the whole application instead of one song. Is here a way to create key command sets only for each song instead of a universal set?

I do it a lot 
could you paste screnshot of your command set?
I've recently met another issue,
with my command set definition as below (as you can see its very simple):
almost every show is blocked (as suspected) but not "show run" (which is strange for me)

Similar Messages

  • ACS 5.3 Shell Command Set

    Hi all,
    Currently i deploy a ACS 5.3 at customer site. The issue i face currently is some command sets no able to deny. Example like below:
    i want to deny the AD user with priviledge level 15 to change the enable secret password and delete the enable secret password.
    the command i issue at below:
    deny enable secret -> working
    deny no enable secret  -> no working
    Anyone got idea to make the no working argument become working?

    Hi there,
    I just did a test in my ACS using your requirements and it worked fine, check below my configuration it may help you:
    I am using the following AAA commands:
    Switch(config)#do sh run | i aaa
    aaa new-model
    aaa authentication login default group tacacs+ local
    aaa authorization config-commands
    aaa authorization exec default group tacacs+ local
    aaa authorization commands 0 default group tacacs+ if-authenticated
    aaa authorization commands 1 default group tacacs+ if-authenticated
    aaa authorization commands 15 default group tacacs+ if-authenticated
    aaa session-id common
    Switch(config)#
    Rate if it helps!

  • What IOS command similar to catos command 'set port vtp X disable'

    Hi,
    Does anyone know if a similar command of catos command 'set port vtp X disable' exists in native IOS (12.1E or 12.2SX) on cat6500?
    We still can play in native IOS with VTP pruning, transparent mode but it seems that we can no more disable VTP on a particular port/interface.
    Many thanks.
    Regards/Ludovic.

    While one may not be able to disable VTP directly, I would think you could use a MAC ACL against the VTP MAC address of 01-00-0C-CC-CC-CC. (See http://www.cisco.com/en/US/partner/tech/tk389/tk689/technologies_tech_note09186a0080094c52.shtml for details on how that addressing works.)
    See http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_configuration_guide_chapter09186a00801679f8.html#wp1359352 for details on the command syntax.
    Hope this helps. Please rate helpful posts.

  • Custom command set problems

    Hi,
    I am having some problems with my custom Avid based command set.
    I have had the "A" and "S" keys assigned to "Go to prev/next edit" to simulate Avid but want to change it to "Up" and "Down" which does pretty much the same in the timeline but allows me to go to next/previous clip in the list view as well.
    The problem is that every time I try to assign the "Down" command to the "S" key the .commandset file gets corrupt and the next time I start fcpx it freezes at "Restoring the window layout".
    I can assign it if I make a completely new command set.
    Can anyone see if they can recreate this? My commandset file can be downloaded here: http://dl.dropbox.com/u/6196177/Avid.commandset
    I have a norwegian keyboard if that matters...
    Thanks!

    OK, then it has do be something specific with my command set. I've recreated my problem several times: Start fcpx, works fine, quit, take backup of preferences file. Start fcpx again, works fine, switch to custom command set, works fine, quit, restart of app fails... revert to backed up preferences file, works fine...
    What could it be in my command set then? I've tried recreating the setup I use in Avid. The thing is that it works just fine until I quit and restart the app... Really annoying!
    Thanks for your answer though!

  • I have an "Command set ID" with value "A" in SPAD tansx with com. to transf

    Hello
    Does anyone knows how a device in "spad" transaction functions (in Unix)
    Under Access method"L:Print Locally Using LP/LPR") I have an Command set ID with value "A" .
    Under mentioned "command set" I have :
    "command to transfer data " set to " /usr/bin/cat &F >/usr/sap/planning/REMINDER&N.txt". What does that means.
    Does it mean any printout is copied to "/usr/sap/planning/REMINDER&N.txt" file? Also corrupted (not finished...) ones?
    what is the name of file under "/usr/bin/cat ". Is it always the same? is it copied in same format (what
    "&F >/" means?)?
    Thx in advance

    Hai,
    Command set id option in SAP helps to override the DEFAULT SAP parameter for the command that a print program should use to have a host spooler perform an output request.
    Default parameter is  rspo/host_spool/print.
    You can specifically give a command to your printer through this option, COMMAND SET ID.
    Here " /usr/bin/cat &F >/usr/sap/planning/REMINDER&N.txt" is the command which helps thr spooler to direct your output.
    /usr/bin -- is the directory under which it has all the commands for UNIX.
    /usr/bin/cat -- where 'cat' is a command, cat command reads one or more files and prints them to standard output. The operator > can be used to combine multiple files into one.
    &F Name of the file to be printed (with path specification).
    /usr/sap/planning/REMINDER&N.txt  -- is where you can find your output.
    You can even use /usr/bin/cp instead of usr/bin/cat here the former command copies to another file after the &F option.
    You can use any type of commands, please check the below link.
    Also you can use this command set option for Null printers were you dont need the printouts but only the spool. Here you can set the command as 'cp &F /dev/null' were the output is redireted to /dev/null path at the OS level.
    http://help.sap.com/saphelp_nw04/helpdata/EN/d9/4a8eb751ea11d189570000e829fbbd/frameset.htm
    Regards,
    Yoganand.V

  • Command Sets not working on ACS 5.1

    I'm running ACS 5-1-0-44-3.
    I have everything running properly on ACS 5.1.  I'd like to implement command sets for selected users and groups.  Under Access Policies -> Device Admin-> Authorization I have Command Sets selected.  The cisco provided is DenyAllCommands.  I have this command set running on all groups and every groups is still able to issue any command they wish.  I've also created a "show_only" command set that I've issued one group and they are still able to do conf t or any other command.
    Am I missing something?
    Do you need to reference the command set name under the shell profiles?
    Its my understanding that all you have to do is reference it in "Authorization" in the rules under Device Admin.
    I can understand a custom command set not working because of user error but DenyAllCommands should work.
    Anyone have any ideas?
    I have already re-patched the ACS
    Stopped and started services.
    And it seems like Command Sets is the only not referenced in the logs

    I do it a lot 
    could you paste screnshot of your command set?
    I've recently met another issue,
    with my command set definition as below (as you can see its very simple):
    almost every show is blocked (as suspected) but not "show run" (which is strange for me)

  • Does Logic has a divide (strings divisi) signal (midi) command?

    I am working on a string orchestra piece and use a lot of divided string parts. I was wondering if Logic knows a command or way to automatically divide a strings section like 1st violins into two.
    For example, in Finale 2010, the notation program, when I write the command "divisi" on a staff in the 1st violin staff, Finale changes somehow the sound of that track so it really sounds like a divided string group. In logic now the way I do it, it sounds like a doubled string track, so 2 groups of 1st violins what gives a doubled unrealistic sound.
    I don't know if this is just a midi command in Finale that can be used in Logic as well.
    André

    Hi André,
    In Logic you don't have those preprogramed patch changes like in Finale/Sibelius, (that's is something some of us asked and wait for some time, that the writing articulations on score could perform midi events instead being there for visually only) those patch changes can be performed via midi commands (same thing as pizz/arco), Yes.
    The simplest way to do this (only if you use / share the same sound library in Logic and Finale) is apply the divisi and the other articulations in Finale and import the midi to Logic ( I did it a lot to save me time, even with crescendos) Logic will follow/performed the articulations in the midi file, if you have the same library on both, that's it.
    If not you can see what the midi file (from finale) says in the event lists and apply it to the library you're using in Logic. (don't forget that you can copy those (and other) events in Logic.
    Cheers,
    Jorge

  • I can't open some photoshop files it says "The command "Set" is not currently available."

    What does this mean and how can I fix it? A corworker will make a photoshop file (Poster for example) and when i try to open it on my computer it wont open and says "The command “Set” is not currently available." What does this mean and how can I fix it? Thanks!

    You are running some sort of automation when you open files - because that error message comes from automation (actions, scripts or plugins) that are trying to target something that isn't there.
    Event Scripts was the obvious choice.
    Automation plugins, or Flash Panels are the next most obvious -- try disabling all third party plugins and Flash Panels.
    The error might come from Generator, if you have the latest Photoshop CC.

  • NI automotive Diagnostic Command Set and LV Real-Time

    Hello world !!
    I'd like to have some informations about the support of NI automotive Diagnostic Command Set under LV-RT.
    Is the API fully supported ?
    Is there a plan in the roadmap to support these tools with cRIO CAN modules ?
    Thanks for your help.
    Best regards,
    Pierre R...
    Certified LabVIEW Developer

    Hello Dirk,
    I just have a new question, I think the response is YES, but I prefer to confirm my mind.
    Could you confirm that the ADCS permits us to fully implement the UDS standard in our LV RT apllication ?
    Best regards,
    Pierre R...
    Certified LabVIEW Developer

  • Error when running Actions - Command "set" not currently available.

    I am trying to run an action for creating a 3D paperback book. Every time I run it, whether I make changes or not, it stops part of the way through the second step with the error message 'command "set" not currently available'. If I continue anyway, it completes the action but the end result doesn't look right. What can I do to fix this?

    Yes, it was a free download I found online and yes I was following the steps. However, I ended up fixing the issue by downloading an updated version of the same action that was part of a set of 3D actions. This one was not free but it was well worth it to save me the time and headache of trying to figure out how to fix the other one. Plus it came with tons of other awesome actions that I will use as well.

  • Automotive diagnostic command set

    Hello Everyone,
    I started to use "Automotive Diagnostic Command Set" for LabView with NI USB CAN 8473 and I have a fundamental problem: I can not see the answers of the ECU.
    The messages are properly sent and my ECU responds (see him with another tool that acts as a sniffer on the network), but are not able to review the responses of the ECU
    What I'm doing wrong?
    In attachment the screenshot of my very elementary project
    thank you very much
    monica
    Solved!
    Go to Solution.
    Attachments:
    DIAG.jpg ‏141 KB

    Hello Monica,
    You can check the example in Labview "Transmit Receive same port.vi"
    I think it shows exactly what you would like to do.
    Antonios
    Attachments:
    Transmit Receive same Port.vi ‏27 KB
    Transmit Receive Same Port.txt ‏1 KB

  • ACS 5.5 Command Set Arguments

    Ran into a small problem with ACS 5.5, when assigning Permit commands in the Command Sets I wanted to be able to Permit the "show" command with all the commands within that group being permitted. 
    In ACS 4, I was able to check a small box labeled "Permit Unmatched Args" and all of the "show" commands were permitted.
    Reading the guide for ACS 5 it says it uses Unix expressions for the Arguments, which I know a few, but I do not know what the "permit all" is.
    Thanks for any help.

    Ben,
    If you leave the arguments blank it should have the effect you want.
    cheers
    Rich

  • Pro Tools key command set?

    Is this no longer included? That's a real shame. does anyone know how to accomplish this? I don't see it in the key commands menu, and the logic setup assistant is no more..

    Hey I just read a post by "Fuzzy chair Productions" in a different thread and they posted this explanation of how to import Logic 7 key commands, set your keys in 7 to protools settings, then use this to import the ones that match up into Logic 8. Don't know for sure if it'll work, because I don't want to do it. But worth a try, and thanks to Fuzzy chair Productions for the explanation below:
    To import Logic 7 key commands into Logic Pro 8:
    In the Key Commands window, choose Options > Import Key Commands.
    Select the Logic 7 preferences file in the file selector you can find it >~/Library/Preferences/Logic/com.apple.logic.pro.
    Logic Pro 8 will inform you about all changes which apply to your key command set at this point.
    Note: Some Logic 7 commands may work differently—or may not be functional at all in Logic Pro >8.
    To switch back and forth between the Logic Pro 8 and Logic 7 key command sets, you need to >export the Logic 7 key command set in the Logic Pro 8 format.
    To export a key command set in Logic Pro 8:
    In the Key Commands window, choose Options > Export Key Commands.
    Type a name such as “My Logic 7 Key Commands” and click Save.

  • Shell profile without a Command Set in ACS 5.1 - TACACS

    Hi all,
    I have created a shell profile with a default Privilege level of 15, I am able to successfully call this via an Access Service Rule. The issue I have however is that depite having the # symbol after I log in, the switch will only allow me to perform priv 15 level commands if I also bind an 'Allow All' command set to the results in the access service rule.
    Is this how it should work or should the shell profile alone with the priv 15 setting be enough? Am I missing something?
    The reason I ask is that in ACS 4.2 I would just set the tick Shell (exec) and set the Priv level to 15 in the appropriate group and would be good.
    Thanks in advance
    Rhodri

    FYI
    The issue here was the use of the 'aaa authorization commands' command.
    If I don't use these commands, then I only need the shell profile as no command authorization takes place post authentication.
    If using these commands, then you must also bind a command set to the results of the rule as the NAD will query the AAA server for each command.
    If I want to permit all commands for a certain priv level, I use a 'permit all commands' command set which will then allow all commands within a specific priv level.
    Here's an example NAD config:
    aaa group server tacacs+
    server 10.10.10.10
    aaa authentication login default local
    aaa authentication login Primary group local
    aaa authentication login Secondary local
    aaa authorization config-commands
    aaa authorization exec default group if-authenticated
    aaa authorization commands 0 default group if-authenticated
    aaa authorization commands 1 default group if-authenticated
    aaa authorization commands 3 default group if-authenticated
    aaa authorization commands 15 default group if-authenticated
    aaa accounting exec default start-stop group
    aaa accounting commands 0 default start-stop group
    aaa accounting commands 1 default start-stop group
    aaa accounting commands 3 default start-stop group
    aaa accounting commands 15 default start-stop group
    line con 0
    login authentication Secondary
    line vty 0 4
    login authentication Primary
    Hope this helps someone

  • ACS matching too much on shell command sets

    I have a problem with ACS, I only want to give users access to gig1/0/1 but ACS matches 1/0/10, 1/0/11, 1/0/12...1/0/19 in my command set (the statement is set to permit GigabitEthernet 1/0/1). How do I tell it to match only 1/0/1 and nothing else?
    Thanks!!

    interface--------permit GigabitEthernet [1] [0] [1]
    Or
    interface--------permit GigabitEthernet [1][0][1]
    Regards,
    Prem
    Please rate if it helps!

Maybe you are looking for