Midi connecting problems: using Logic Express 9 with MBox 2 interface and a Mac OSX 10.6.8
I have a Mac OSX and I use Logic Express 9 on it. I also use an MBox 2 digidesign. Im having trouble connecting midi and getting it to work from my Roland Keyboard Midi, to the back of my Mbox 2 Midi. Its just not working at all. Does anyone know how to make Midi work with the Mbox 2 using Logic Express 9 on my OSX 10.6.8
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Also try turning off Bluetooth
Similar Messages
-
Problems Using Logic Express with Alesis Multimix 8
Hi,
Does anybody have any experience of using the Alesis Multimix 8 USB with Logic Express 7.0.1? As far as I can tell the software is set up OK. The problem is that there is an awful amount of noise present on both the input and the output (sounds like inordinatley loud dither). The problem is also present on Garageband and iTunes but not with Cubase LE (bundled in with the Multimix).
I have searched and searched the internet for drivers for the Multimix but with no luck. At the moment I am just using the "core audio" USB codec drivers that are built in as I seem to have no other option.
Does anybody have any suggestions before I go ahead and buy another external audio interface? (got my eye on the new Behringer F-CONTROL AUDIO FCA202)
Rev. G Rock
PS I am running OS X (10.3.9) on a G4 iBook (1.33 GHz, 1.25 GB RAM) and have done all the updates available for Logic Express 7.0(.1)
iBook G4 Mac OS X (10.3.9)OK I understand it's helpful to others to post solutions should you find them so here goes:
It would seem that the problem is with the built in CODEC used by OS X. You can update using the drivers available at http://www.usb-codec.com
I used the demo version to see if it solved the problem which it did. However you need to buy the software to get rid of the annoying beep every 30 secs on the demo version. well worth it to get my hardware working properly though.
Rev. G Rock -
Can someone please help.Can I use Logic Express with an MBox and if so how.
Hey Roma,
welcome to the forum!
Assumming you had the drivers installed, (in Logic) go to the audio menu>audio hardware & drivers>Driver (change from built in audio to Digidesign HW (MBox), Relaunch, that's it.
((Click on (say) audio 1 (to select track) Press R to arm it and you shoud now have sound level on metters. Don't forget the I/O in logic is audio 1 = input 1, audio 2 = input 2, audio 3 = input 1, audio 4 = input 2 and so on (by default))
Kiddly regards,
Jorge -
Can I use logic express with my Macbook
I just got a macbook and i was wondering if I can use Logic express or pro on it??
yes!
it of coourse depends what you want to do with it - but yes!
by all acounts logic express and pro will run very well on the new macbooks.
I'm using pro on my old powerbook - just about manage to use it live and it's slow but useable to get ideas down onto and am using an intel imac as my main studio computer with logic pro 7.2.3 - it's essentially the same as a macbook except it doesn't have integrated graphics and it has a faster hard disk which does make a difference. Apart from that i'm sure your new macbook would toast my powerbook in terms of performance.
Be sure to get the intel version of logic (7.2 and above) as an older "ppc" version may run but is not supported and would probably run very slowly.
Enjoy!
Rounik -
Problems using airport express with both macs and a windows xp??
Hi....I have just bought a netbook and my wireless connection that I use at home is via an airport express that works brilliantly on my 2 macs however with the new netbook the connection is intermittent even though it always says its connected to my wireless network.
I am completely hopeless with pc's and just needed a netbook for occasional use but wish I new why sometimes the internet works on it on the airport network and othertimes it doesnt. I have removed all firewalls and still have the same problem.
Anyone know a solution or what may be happening as I am at a loss as to why it intermittenty works even though it always says the connection is excellent.
The macs work just fine!!
thanks in advance
robHi....I have just bought a netbook and my wireless connection that I use at home is via an airport express that works brilliantly on my 2 macs however with the new netbook the connection is intermittent even though it always says its connected to my wireless network.
I am completely hopeless with pc's and just needed a netbook for occasional use but wish I new why sometimes the internet works on it on the airport network and othertimes it doesnt. I have removed all firewalls and still have the same problem.
Anyone know a solution or what may be happening as I am at a loss as to why it intermittenty works even though it always says the connection is excellent.
The macs work just fine!!
thanks in advance
rob -
Can I use Airport Express with Comcast router and Apple TV?
I want to connect my iPod Touch (version 8.1.2) to a home stereo wirelessly. I am considering getting an AE Base Station. I have a Mac mini running OSX 10.9.5 connected wirelessly using a Comcast router. I also have an Apple TV, which I have not yet connected to my TV. Here are some questions.
Are there any problems with doing this. In particular, can I continue to use the Comcast router?
Also, I have seen some comments saying that the cable modem slowed down when AE was added. Is that true? Thanks,
OwenThe stereo doesn't have wireless (or bluetooth).
My understanding is that the iPod Touch has a built-in airplay transmitter.
If so, connecting the AE Base Station to my stereo would allow sending music from my iPod to my stereo.
Is that correct? Thanks.
Owen -
How do you overcome problems using Photoshop Elements with Win 7 and Eyefinity display?
I have a 3 screen Eyefinity setup on a PC running 64bit Win 7 with 16gb RAM and an AMD Radeon 7950 graphics card and Phenom II x4 processor.
I struggle to get a stable PSE10 to work on this setup.
I bought a combined set of Photoshop and Premier Elements 10 and although installed it always crashed when I saved images with the error message "Adobe Photoshop Elements 10 has stopped working". I recently did a fresh install of Windows 7 and decided I had to solve the Photoshop problem.
I installed Premier 64 bit version from disk 2 and Photoshop Elements from disk 1 and then ran compatability checker. Under compatability settings for Win XP srv pack 3 it starts although with some toolbar errors and top and bottom of screen transparent instead of solid. I can save files worked on but then still get the error when I exit Photoshop Elements.
Has anyone had similar and solved the problem? Tech Support said my s/w was too old and unsupported without a service contract.There should be no need for compatibility mode; pse10 is designed to run on W7. Try making a direct shortcut for the Editor. You can then launch the program directly from the desktop bypassing the welcome screen. This is generally better as the welcome screen leaves background processes running.
Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files(x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
Then click Next; then click Finish
To launch, try right-clicking on the new desktop icon and choose “Run As Administrator” which often improves stability. -
Can I use my iPod with a PC and a Mac?
I have a PC at work and a Mac at home, can I use both or do I have to choose?
Mac OS 10+ and PC Windows XP.If your iPod was not originally set up on the PC, Restore the iPod on the PC, select the iPod under DEVICES, tick the box that says "Manually Manage..." and click Apply. Now highlight and drag the songs you want on the iPod from your iTunes library to your your iPod. You will have to manually eject the iPod. Repeat the manual syncing of songs on your Mac at home.
You will have to do any firmware updates on the PC at work. -
Problems using Dynamic parameters with Crystal Reports and SBO 8.8
Has anyone been able to successfully use a dynamic parameter in Crystal Reports with 8.8 using the Business One connector? When we try we get an additional logon to the database that pops up and the logon fails.
We need this because we want to return live lists of PO documents from the server for selection. We are also trying to use nested dynamic parameters, because we want to first return the PO document based on the PO number, and then chose specific rows based on a field value in POR1.
It works if we don't use the Business One connector, but then the report doesn't function properly inside of SAP.
Any ideas would be appreciated.I have tried using tokens but they are too simple. I need something like a subselect where you first select one value and then another that is a subset of those values. Apparently the tokens can't even use a "where" clause.
SAP dances around Dynamic parameters, but won't come out and say that they can't be used with the B1 connector. If that is the case then they should just say so and stop wasting our time. Apparently Crystal is not truely interfaced with B1, just sort of hanging out with it.
I don't really care other than I have to do this select, subselect. If someone has a way to do that with tokens I would love to hear it.
Thanks,
Roy -
Using a KVM with an iMac and Tower Mac
I have searched thru this topic and others without finding anything, so, I am posting this question. If it has been answered already please forgive me for posting again.
I have a blueberry 333 iMac that I would like to use with a KVM that allow me to also use a B&W tower mac too. I know that the connector is not a standard VGA connector, but, I think I can either buy or make an adapter. It appears that the monitor connector on the iMac is a match to the PC Gameport connector.
Anyway, assuming I can get such an adapter, is is possible to use the iMac in the way that I have described? Thanks!If you mean that you want to use the iMac's internal monitor as a monitor for your PowerMac, then sorry but no. There's no way (at least no practical way) to do that. The KVM could, of course, switch the keyboard and mouse.
BTW, for future questions, I'd suggest you try asking in the iMac (CRT) area. This forum is for the new Intel-based iMac and so perhaps not the most likely place for you to get a quick and accurate response.
Good luck. -
Digital outs in Logic Express with 828 or 002 rack
Can someone tell me if it is possible to use the digital ins and outs of either my MOTU 828 or DIgi 002 rack with LE? It's no where as easy as Pro tools or DP!!
Forgive my naivety... when you say "digital outs" are you talking about SPDIF? Does this mean I can't run Logic Express with an interface connected to the SPDIFs on my G5? Only Pro? Or am I off the mark?
Thanks! -
I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!
You're probably on OS X Lion?
I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems. -
SAP Crystal Reports data source connection problem using sap business one
Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis. -
Can you use logic express on a mac mini for recording
Can i use logic exprees on a mac mini for recording? Ive seen alot of 8,12, and 16 track recorders with a cd burner and it seems like a logical and more productive gues for me to buy a macmini for the same thing of recording and then I can uses logic express, a far better program for recording. can the mac mini handle the load of processing tracks and how much ram should I uses? thanks tim
sorry, I'd like to butt in here:
I would like to do the same thing, so I am curious about this forum and rather than starting a new one, can I get some advice on this possibility:
Mac Mini
1.83GHz Intel Core Duo
2GB 667 DDR2 SDRAM - 2x1GB
80GB Serial ATA drive
Glyph External HD 250 Gig
Mackie Onyx 1620 w/Firewire
Logic Pro 7.2
thoughts?
The most number of tracks I could see at once would be 16.
Here is something I am most curious about...
Firewire Hard drive
Firewire Interface/mixer
Firewire camera for FCP
to much firewire?
Please let me know if you have other thoughts aswell...
Shuke
thanks guys, this forum is fantastic! -
Hi,
I have a question on using EJB / or RMI servers with CORBA clients using
RMI-IIOP transport, which in theory should work, but in practice has few
glitches.
Basically, I have implemented a very simple server, StockTreader, which
looks up for a symbol and returns a 'Stock' object. In the first example, I
simplified the 'Stock' object to be a mere java.lang.String, so that lookup
would simply return the 'synbol'.
Then I have implemented the above, as an RMI-IIOP server (case 1) and a
CORBA server (case 2) with respective clients, and the pair of
client-servers work fine as long as they are CORBA-to-CORBA and RMI-to-RMI.
But the problem arises when I tried using the RMI server (via IIOP) with the
CORBA client, when the client tries to narrow the object ref obtained from
the naming service into the CORBA idl defined type (StockTrader) it ends up
with a class cast exception.
This is what I did to achieve the above results:
[1] Define an RMI interface StockTrader.java (extending java.rmi.Remote)
with the method,
public String lookup( String symbol) throws RMIException;
[2] Implement the StorckTrader interface (on a PortableRemoteObject derived
class, to make it IIOP compliant), and then the server to register the stock
trader with COS Naming service as follows:
String homeName =....
StockTraderImpl trader =new StockTraderImpl();
System.out.println("binding obj <" homeName ">...");
java.util.Hashtable ht =new java.util.Hashtable();
ht.put("java.naming.factory.initial", args[2]);
ht.put("java.naming.provider.url", args[3]);
Context ctx =new InitialContext(ht);
ctx.rebind(homeName, trader);
[3] Generate the RMI-IIOP skeletons for the Implementation class,
rmic -iiop stock.StockTraderImpl
[4] generate the IDL for the RMI interface,
rmic -idl stock.StockTraderImpl
[5] Generate IDL stubs for the CORBA client,
idlj -v -fclient -emitAll StockTraderImpl.idl
[6] Write the client to use the IDL-defined stock trader,
String serverName =args[0];
String symList =args[1];
StockClient client =new StockClient();
System.out.println("init orb...");
ORB orb =ORB.init(args, null);
System.out.println("resolve init name service...");
org.omg.CORBA.Object objRef
=orb.resolve_initial_references("NameService");
NamingContext naming =NamingContextHelper.narrow(objRef);
... define a naming component etc...
org.omg.CORBA.Object obj =naming.resolve(...);
System.out.println("narrow objRef: " obj.getClass() ": " +obj);
StockTrader trader =StockTraderHelper.narrow(obj);
[7] Compile all the classes using Java 1.2.2
[8] start tnameserv (naming service), then the server to register the RMI
server obj
[9] Run the CORBA client, passing it the COSNaming service ref name (with
which the server obj is registered)
The CORBA client successfully finds the server obj ref in the naming
service, the operation StockTraderHelper.narrow() fails in the segment
below, with a class cast exception:
org.omg.CORBA.Object obj =naming.resolve(...);
StockTrader trader =StockTraderHelper.narrow(obj);
The <obj> returned by naming service turns out to be of the type;
class com.sun.rmi.iiop.CDRInputStream$1
This is of the same type when stock trader object is registered in a CORBA
server (as opposed to an RMI server), but works correctly with no casting
excpetions..
Any ideas / hints very welcome.
thanks in advance,
-hariOn the contrary... all that is being said is that we needed to provide clearer examples/documentation in the 5.1.0 release. There will be no difference between the product as found in the service pack and the product found in the 5.1.1. That is, the only substantive will be that 5.1.1 will also
include the examples.
"<=one way=>" wrote:
With reference to your and other messages, it appears that one should not
expect that WLS RMI-IIOP will work in a complex real-life system, at least
not now. In other words, support for real-life CORBA clients is not an
option in the current release of WLS.
TIA
"Eduardo Ceballos" <[email protected]> wrote in message
news:[email protected]...
We currently publish an IDL example, even though the IDL programmingmodel in Java is completely non-functional, in anticipation of the support
needs for uses who need to use IDL to talk to the Weblogic server,
generically. This example illustrates the simplest connectivity; it does not
address how
to integrate CORBA and EJB, a broad topic, fraught with peril, imo. I'llnote in passing that, to my knowledge, none of the other vendors attempt
this topic either, a point which is telling if all the less happy to hear.
For the record then, what is missing from our distribution wrt RMI-IIOPare a RMI-IIOP example, an EJB-IIOP example, an EJB-C++. In this you are
correct; better examples are forth coming.
Still, I would not call our RMI-IIOP implementation fragile. I would saythat customers have an understandably hard time accepting that the IDL
programming model is busted; busted in the sense that there are no C++
libraries to support the EJB model, and busted in the sense that there is
simply no
support in Java for an IDL interface to an EJB. Weblogic has nothing to doit being busted, although we are trying to help our customers deal with it
in productive ways.
For the moment, what there is is a RMI (over IIOP) programming model, aninherently Java to Java programming model, and true to that, we accept and
dispatch IIOP request into RMI server objects. The way I look at it is this:
it's just a protocol, like HTTP, or JRMP; it's not IDL and it has
practically nothing to do with CORBA.
ST wrote:
Eduardo,
Can you give us more details about the comment below:
I fear that as soon as the call to narrow succeeds, the remainingapplication will fail to work correctly because it is too difficult ot
use an idl client in java to work.It seems to me that Weblogic's RMI-IIOP is a very fragile
implementation. We
don't need a "HelloWorld" example, we need a concrete serious example(fully
tested and seriously documented) that works so that we can get a betteridea
on how to integrate CORBA and EJB.
Thanks,
Said
"Eduardo Ceballos" <[email protected]> wrote in message
news:[email protected]...
Please post request to the news group...
As I said, you must separate the idl related classes (class files and
java
files) from the rmi classes... in the rmic step, you must set a newtarget
(as you did), emit the java files into that directory (it's not clearyou
did this), then remove all the rmi class files from the class path... ifyou
need to compile more classes at that point, copy the java files to theidl
directly is you must, but you can not share the types in any way.
I fear that as soon as the call to narrow succeeds, the remainingapplication will fail to work correctly because it is too difficult otuse
an idl client in java to work.
Harindra Rajapakshe wrote:
Hi Eduardo,
Thanks for the help. That is the way I compiled my CORBA client, by
separating the IDL-generated stubs from the RMI ones, but still I
get a
CORBA.BAD_PARAM upon narrowing the client proxy to the interfacetype.
Here's what I did;
+ Define the RMI interfaces, in this case a StockTrader interface.
+ Implement RMI interface by extendingjavax.rmi.PortableRemoteObject
making
it IIOP compliant
+ Implemnnt an RMI server, and compile using JDK1.2.2
+ use the RMI implementation to generate CORBA idl, using RMI-IIOPplugin
utility rmic;
rmic -idl -noValueMethods -always -d idl stock.StockTraderImpl
+ generate Java mappings to the IDL generated above, using RMI-IIOPplugin
util,
idlj -v -fclient -emitAll -tf src stocks\StockTrader.idl
This creates source for the package stock and also
org.omg.CORBA.*
package, presumably IIOP type marshalling
+ compile all classes generated above using JDK1.2.2
+ Implement client (CORBA) using the classes generated above, NOTthe
RMI
proxies.
+ start RMI server, with stockTrader server obj
+ start tnameserv
+ start CORBA client
Then the client errors when trying to narrow the obj ref from the
naming
service, into the CORBA IDL defined interface using,
org.omg.CORBA.Object obj =naming.resolve(nn);
StockTrader trader =StockTraderHelper.narrow(obj); // THIS
ERRORS..!!!
throwing a CORBA.BAD_PARAM exception.
any ideas..?
Thanks in advance,
-hari
----- Original Message -----
From: Eduardo Ceballos <[email protected]>
Newsgroups: weblogic.developer.interest.rmi-iiop
To: Hari Rajapakshe <[email protected]>
Sent: Wednesday, July 26, 2000 4:38 AM
Subject: Re: problem using CORBA clients with RMI/EJBservers..!!!???
Please see the post on june 26, re Errors compiling... somewherein
there,
I suspect, you are referring to the rmi class file when you are
obliged
to
completely segregate these from the idl class files.
Hari Rajapakshe wrote:
Hi,
I have a question on using EJB / or RMI servers with CORBA
clients
using
RMI-IIOP transport, which in theory should work, but in practice
has
few
glitches.
Basically, I have implemented a very simple server,
StockTreader,
which
looks up for a symbol and returns a 'Stock' object. In the firstexample, I
simplified the 'Stock' object to be a mere java.lang.String, so
that
lookup
would simply return the 'synbol'.
Then I have implemented the above, as an RMI-IIOP server (case
1)
and a
CORBA server (case 2) with respective clients, and the pair of
client-servers work fine as long as they are CORBA-to-CORBA andRMI-to-RMI.
But the problem arises when I tried using the RMI server (via
IIOP)
with
the
CORBA client, when the client tries to narrow the object ref
obtained
from
the naming service into the CORBA idl defined type (StockTrader)
it
ends
up
with a class cast exception.
This is what I did to achieve the above results:
[1] Define an RMI interface StockTrader.java (extending
java.rmi.Remote)
with the method,
public String lookup( String symbol) throws RMIException;
[2] Implement the StorckTrader interface (on a
PortableRemoteObject
derived
class, to make it IIOP compliant), and then the server to
register
the
stock
trader with COS Naming service as follows:
String homeName =....
StockTraderImpl trader =new StockTraderImpl();
System.out.println("binding obj <" homeName ">...");
java.util.Hashtable ht =new java.util.Hashtable();
ht.put("java.naming.factory.initial", args[2]);
ht.put("java.naming.provider.url", args[3]);
Context ctx =new InitialContext(ht);
ctx.rebind(homeName, trader);
[3] Generate the RMI-IIOP skeletons for the Implementation
class,
rmic -iiop stock.StockTraderImpl
[4] generate the IDL for the RMI interface,
rmic -idl stock.StockTraderImpl
[5] Generate IDL stubs for the CORBA client,
idlj -v -fclient -emitAll StockTraderImpl.idl
[6] Write the client to use the IDL-defined stock trader,
String serverName =args[0];
String symList =args[1];
StockClient client =new StockClient();
System.out.println("init orb...");
ORB orb =ORB.init(args, null);
System.out.println("resolve init name service...");
org.omg.CORBA.Object objRef
=orb.resolve_initial_references("NameService");
NamingContext naming=NamingContextHelper.narrow(objRef);
... define a naming component etc...
org.omg.CORBA.Object obj =naming.resolve(...);
System.out.println("narrow objRef: " obj.getClass() ":"
+obj);
StockTrader trader =StockTraderHelper.narrow(obj);
[7] Compile all the classes using Java 1.2.2
[8] start tnameserv (naming service), then the server to
register
the
RMI
server obj
[9] Run the CORBA client, passing it the COSNaming service ref
name
(with
which the server obj is registered)
The CORBA client successfully finds the server obj ref in the
naming
service, the operation StockTraderHelper.narrow() fails in thesegment
below, with a class cast exception:
org.omg.CORBA.Object obj =naming.resolve(...);
StockTrader trader =StockTraderHelper.narrow(obj);
The <obj> returned by naming service turns out to be of the
type;
class com.sun.rmi.iiop.CDRInputStream$1
This is of the same type when stock trader object is registeredin a
CORBA
server (as opposed to an RMI server), but works correctly with
no
casting
excpetions..
Any ideas / hints very welcome.
thanks in advance,
-hari
Maybe you are looking for
-
Hello, I am trying to install Design Standard CS6 on a Windows 8.1 Machine 64 bit (Toshiba Click-2 Pro, i7, 8 GB RAM, 1920 x 1080 resolution) I get Warning DW066 and DW065, saying "OS Requirements not met" and "Display Requirements not met" for vari
-
How to stop Aperture starting up when iPhone is plugged in?
Hi all, silly question... but Aperture keeps opening whenever my iPhone is plugged in. Does anyone know how to stop this? Not a big deal... but its getting annoying! Thanks in advance! Lil
-
MSS/Company property iview empty
Hello, We need to show company property iview from MSS/General Information. We've customized 40 infotype. We choose a user from Employee Search iView, when selecting an employee, the Company Property iView is empty. Please, do you know how can I do s
-
Install Acrobat Pro X on a new computer
I have been using Acrobat Pro X and am replacing the computer. How can I download a replacement? Also, is it possible to ascertain the serial # from the already installed copy (old computer)? Thanks! Linda
-
Hello everyone! I'm a newbie. The problem is the column of [DiskRead and Write]&[Network Received and Transmitted] has nodata.The others are OK(CPU,Memory etc.). I already set the base rate for [DiskRead and Write]&[Network Received and Transmitted]