MIDI events are crazy.

When I create some events in the "matrix" and try to edit them, those edited events will cause a delay. It sounds like if every note was note quantized.

By today's standards the MIDI bus speed is slow. Poor performance can be expected if the data is too thick, if you have too many devices (daisy chained), etc.. Does the issue minimise when the single sequence is soloed? (assuming you are using instruments multitimbrally). Try thinning out the data or isolating the problem.

Similar Messages

External Midi Events Playing Too Early

Hi there. Got a bit of an issue with midi timing under Logic 8, I run an Emagic AMT8 and a MTP AV as my midi interfaces but I'm noticing the midi events are playing before audio events, ie if I've got a bassline running on an plugin instrument, copy it to an external midi track and trigger a midi synth the synth is playing back earlier than plugin by about -120 ticks or whatever the delay compensation unit is in the inspector. This is global across all midi ports. I've got full plugin delay compensation turned on for the audio, my buffer is 512 (I use 2 UAD cards and thats the recommended setting)
I've hunted high and low through the manuals but can't find any parameter or reason why this would globally apply across all external midi ports, any suggestions greatfully appreciated as its driving me nuts.

Well Logic's Plug In Delay Compensation only works for the native Plug Ins not for external Midi stuff so the best thing to do is to record your external Midi as Audio data and align it with the rest of the music otherwise you'll get grey hair trying to find the correct delay offset to sync your external Midi.

How to match a series of midi events to the tempo?

hello there, i've got a series of midi events that i'd like to adjust to the tempo -there are only quarter notes. i thought to use flex time but it seems to be working with audio tracks only. any idea?
as well, i'd like to fix all notes to a same length, which I am not sure how to do either... thanks in advance

well, i'd like to fix all notes to a same length, which I am not sure how to do either.
http://help.apple.com/logicpro/mac/10/#lgcp2158341a

How do I Fade in and out, working with Midi events?

I'm new to logic.
How do you set certain virtual instruments(midi events) to fade in or out. I have a string arrangement written, and whenever the strings end it is very abrupt and unnatural. I want them to fade out, as opposed to just cutting like they do. I would also like to know how to fade in. Is it the same process?
Please help me out if you know how to do this.
Thanks...

I'm not sure what you mean about fading the instrument and not the notes. I just want to fade out one note/per instrument at the end of certain passages. Care to expound?
In general, MIDI does not provide a mechanism to control the volume of individual notes.
In MIDI (and sequencer terms), a note has a note on, a note number (which key was pressed) and how hard you hit that key (velocity). Then a corresponding note off. There is nothing in a note specification that let's you control the volume of a note through it's duration.
In MIDI terms, you can use a controller MIDI message, typically #7 which is used for volume, and modify that over the time the note is playing. But this is controlling the volume of the instrument not the individual notes - the same as turning up and down the volume on the instrument. All notes that the instrument is playing are affected equally - if you are holding a chord, the entire chord will ramp in volume. You cannot just ramp the volume of one note within the chord using this method.
(The closest MIDI can get to controlling individual notes volume is with polyphonic aftertouch, but this is not often supported and is a more advanced technique - given that you are new to this I'm going to ignore it for now to avoid over-complicating things. I mention it to stop all the people chiming in with "you're so wrong Beejay you muppet you can do this with poly aftertouch don't you know anything" blah blah).
Is that more clear?
Also, if you wouldn't mind, could you give me a step by step on opening the hyperview in the piano roll?
Open the piano roll, select View -> Hyperdraw -> Volume.
You can click/draw in it with the pencil tool to create MIDI volume (CC#7) changes.

Mapping specific MIDI events to buttson

While I'm not ready to depend on MainStage for live use due to the patch change/delayed note bug, I'm still experimenting with it in the hope that the bugs WILL get fixed.
I have a Roland FC-300 foot controller and I wanted to try and map a couple of switches to Next Patch and Prev Patch, without having to program the FC-300 itself.
In the default (factory settings) mode, the first two foot switches send Program Change (PC) 1 and 2 respectively. So the actual messages being sent out (assuming midi channel 1) are C0 01 and C0 02 respectively.
Unfortunately, the LEARN mechanism seems to just detect the C0 part and considers the value (01 or 02) to be a changeable parameter. While that's often what you want, it's NOT useful in this particular situation.
So the question is, how can I get MainStage to treat the entire MIDI event as a single atomic command so that I can make two buttons to go up and down?
Thanks,
David Jameson

Actually, dhjdhj, it's a lot easier than you think:
There is a button on the FC 300 called "Mode". (I'm assuming it works just like the one on the FC 200). This will put the FC 300 into one of the modes where the foot switches send midi CC messages, NOT program changes. Just press this button and watch midi input to see when the foot switches send midi CC's. All you need to do is press this button and get in the right mode, no programming necessary.
Once you do that, simply learn/assign all the footswitches you want - make sure to do this for the next and previous patch buttons in your mainstage layout.
I've done this and it works great.
One thing that will surprise you is that the FC footswitches will NOT be in sync with Mainstage. There's no way around this. 1) Mainstage has no midi out (I haven't tried to plugins others have mentioned). 2) NO guitar board I know of takes MIDI in and allows you to only set status lights with it. I think there are some, but none that are big sellers. Even if Mainstage had MIDI out, it wouldn't work anyway until manufacturers support this feature. So your on/off lights on the FC 300 will potentially be out of sync with Mainstage when you change patches. Annoying, but it still works.

View two midi events on the piano roll

Hi, my issue is a follows:
Take two midi events on two separate channels (eg kick on inst 1 channel 1 and snare on inst 2 channel 2) - when highlighting both strips in the arrange, then opening the piano roll (cmd+6), I used to be able to view both. But in logic 9 only one of them can be viewed.
I can view both on the piano roll on the arrange, but that's less desirable (takes away space on my arrange screen).
Any ideas? Thanks a lot.

Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
Quit Logic Pro
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove ~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Note: If you cannot find any of the files mentioned in this tip,you didn't follow the instructions exactly as written

IMPRT "events" are empty after sync

when I synced my iPad 3rd generation with my iMac recently - the first time since purchasing the iPad 3rdG - a SECOND mystery annoyance cropped up (see below for link to the 1st ongoing annoyance).
Syncing my Photos, I select "Selected" events to sync.
Those events are just dandy.
However, many of the "events" named ###IMPRT show on the iPad in the Events area, but they're completely empty.
I can't delete them from the iPad.
HOW do I clean things up? This is aggravating.

I've resynced my iPad with my computer, hoping that maybe these phantom, empty IMPRT "events" would disappear in the process, but no.
When I open Photos on my iPad and go to Events, among the IMPRT events folders, are dozens of empty folders, each labeled with a number followed by IMPRT or with a date.
I can't delete them.
I don't even care any more about WHY this is happening (I gave up trying to understand iCloud and Apple) I just want to know WHAT CAN I DO? I would like to clean things up...the fact that Apple allows users so little control over things like this drives me crazy.
Please help.

Alignment of external MIDI events and audio

Hi,
I've been doing some careful measurements of the timing of MIDI events under Logic 8.0.2. I record a lot of external MIDI hardware, so the timing of external MIDI events and its relation to recorded audio is very important to me.
My setup is OS X 10.5.5, Logic 8.0.2., all relevant patches and updates. I'm using an RME fireface 800 as both the audio and MIDI interface in these examples.
I've created a project in which there is no plug-in of any kind: neither instrument nor effect. Even the klopgeist is gone.
My preferences settings:
Audio/Devices:
buffer=1024 samples
sw monitoring=off
indep mon level=off
I/O safety buffer=off
Audio/General:
PDC=Off (I also measured with PDC=all, to verify that it has no effect)
low latency mode=off
I create an external MIDI track of quantized whole notes: C3, playing on the first tick of each bar. BPM is 120.
I then create another external MIDI track, cable MIDI OUT to MIDI IN on the Fireface, and record the first MIDI track onto the second (i.e., loopback test). The note data is right on the money; within one tick of the original values. I set PDC to all, repeat the test, same result.
I then cable MIDI out on the Fireface to a hardware synth, and call up a patch with a sharp attack. I route the audio output of the synth to an audio input of the Fireface. I create an audio track with this input selected, and record the output of the synth. The recorded audio is early by 20ms or so -- roughly equivalent to the buffer size.
I repeat the test with PDC set to All, same result. PDC has no effect, as you would expect, as there are no plug-ins in this project.
I then set Preferences/MIDI/Sync/All MIDI Output delay to 21ms. I repeat the audio recording test, and now the recorded events are on the money.
Here are my questions. First, am I doing something wrong, or does Logic have a fundamental bug concerning the linkage between MIDI timing and audio timing?
It seems clear to me that this timing error has nothing to do with PDC. There is no "P". Right?
I thought that the RME has timestamped MIDI. The RME manual speaks of very accurate MIDI timing, and I can verify that the MIDI jitter of the Fireface is indeed low, in the 1ms neighborhood. This is borne out by the MIDI loopback test I did above. But MIDI timestamps don't mean anything if they are not correlated to the time code of the audio, haha! What am I missing here?
If timestamping the MIDI data can't work for some reason, could this problem not be solved by having Logic automatically delay the transmission of external MIDI data by an amount equal to the audio buffer size? Put differently, my solution to this problem is to set a MIDI output delay in preferences equal to the audio buffer size, i.e., 21.3ms. And this seems to work. Is that a proper solution, and if so, why does Logic not do such a thing automatically?
Thanks,
-Luddy

OK, so I just retested and here is the best part... I recorded a loop from my drum machine, cut the first note nicely to the 1 on the first bar... using a count in etc.
I played it back and looped outs 3-4 back into 1-2 on my Ensemble. I also played back the same kick on my drum machine just to check this reverse latency issue. I was not concerned with hit for hit layering accuracy. What I got back astounds me!
The "loopback" recording was spot on to the original being played out... totally locked. BUT, the one that was midi clocked by Logic and play from my drum machine came in ahead of the 1??? How is this possible when I am hearing it when monitoring this recording and it is slightly behind? RIDICULOUS! What does this mean?
Logic is NOT recording what I am hearing, but rather recording some timewarped version of it in which it places events ahead of when they happened, but ONLY on midi clocked or midi sent notes!
I have lurked here a long time and I know that there is not much known here about this issue, so before anyone tells me the typical solution I will say as I did in my last post:
I have done a ton of tests like this, I also followed the loopback testing as described on Logicprohelp.com.
Yes I tried it with all PDC modes, SW monitoring on AND off.
I am truly beginning to think that this is a major bug of some sort.
Anyone else out there with hardware that reports latency to Logic (RME, Metric Halo, and Apogee stuff are ones I know that do this) experiencing this abberation?
thanks

Phantom Noise During MIDI Events

Hiya,
I've searched a bit, but haven't found much. I apologize if this has been covered. (Obligatory disclaimer complete!)
Starting earlier this week, I noticed a noise would accompany any MIDI notes I'd play on my keyboard through Logic. Frustrating. I'm having some difficulty describing the noise, but I'll try. First, it has a distinct tone, which is the same tone as the note being keyed. Beyond that it's faint, full of static and has a bit of a phasing effect.
My troubleshooting so far: (restarting, shutting off and on, unplugging and plugging included!)
1) Removed my usb keyboard from the computer, and played MIDI notes through the caps lock keyboard. Issue persists.
2) Used the pencil tool to create MIDI events. Issue persists on playback.
3) Deleted the Logic plist. Issue persists.
4) Tested similarly in GarageBand. Issue persists.
It should be mentioned that I'm not having any other audio issues.
I'm currently reinstalling Logic, but I can't imagine that's going to change much considering the issue is cross application. (I will test older projects sequenced in the Before Time to see if those events phase as well as soon as Logic is done reinstalling.) I'm sure it's a simple solution that I am not familiar with. No doubt I'll kick myself when someone figures it out!
Thanks in advance!

tbirdparis wrote:
It sounds like you might just be hearing electronic interference noise due to the fact that you're using the internal sound of the Mac. In the old days (up to around the time of the G5s), the built in sound on Macs was fairly decent quality, at least in terms of the way it was isolated to reject interference from the electronics running inside the box. More recent models don't seem to be quite as good in this regard,
This is what I thought when first reading this post last night. I have an old Fender guitar amp from the 50's that has the same sound. The same note, played low in the background with a quieter layer of distortion. (static).
It will show up most on tones that are closer to a pure sine wave, like some of the Rhodes/El.Piano sounds. You might not notice it on more complex tones. Also will show up more playing quietly.
What do you have set as the Mac's input device, is it set to Line input, if so try unplugging anything going into the input, just to see if there's some interference.
Also, what are you monitoring the sound through?
pancenter-

"Midi Events" Environment, floating window. How to repeat in next project?

This is proving a slightly bizarre, lovely but rather annoying issue.
I have searched high and low on the web today for an answer, I cannot find it. allow me to explain, I've just upgraded to Logic Pro 9, and after enjoying the Thievery Corporation demo I set to work on scoring a video doc of mine, as really I'm an ex musician who now works ostensibly in Final Cut, on my Mac Pro.
Anyway my first Logic project is going well, lots of plugin purchased, first 5mins complete, now here's the thing, when I open my first project a floating window also appears with it, and it is listed separately from arrangement on the window tab, in this case arrangement is called "imtro" and the floating window is called "imtro:Tempo". It opens and closes with the project, if I hit the top corner of the floating window to close it goes and closes, and cannot be re opened unless I close the project.
I thougt it was a new feature in Logic 9, as it operates as a lovely appregiator inside of Logic. It had 4 boxes (orange) Midi Effects (On/Off), Arp Starts (immediately/on first 1/1, 1/2, 1/4 etc) then a 1/16 appregiator, and 1/8 appregiator button, both with all the varaitions you could imagine, and finally a Delay button. And put simply when I select any track in the arrange window, and swith to Midi Effects to On, it plays wonderfully appreg..., in record it creates all the notes in the piano scroll and event list as I'm playing.
Trouble, once dismissed, I cannot recall it without closing the project, reopening the project.
Worse yet on starting new project for the next piece of music in video doc' I've discovered, it's not a feature I can find anywhere, what's going on?
Back in the original project if I pull the window by the right corner there's a whole bunch of boxes, and it turns out this is an Environment. The trouble is in any other project I open the Environment window from the window tab, and Midi Effects environment is nowhere to found. So I learnt how to import environments from my first project into this project, but cannot seem to get the environment to float over the project where clicking on track in the Arrange window allows the Midi Event float to effect the track I'm playing, yes you can reassign the header of the track to it but it doesn't work as well.
Now have I just stumbled on a new feature, I heartily recommend for Logic 10, or am I missing something? Or is this some kind of glitch or corruption, which just appears to be a good one? I certainly can't read about anywhere, and I can't repeat it by just calling it up in the project? What am I missing? I wonder if Tempo being in it's name is significant, as a floating window, when imorted in Midi effects it appears as the "project name:Enviroment: rather than "project name:Tempo".
Anyone?

The layers in the env. are accessed by the drop down menu at the upper left of the env. window. It has a text field and a downward facing triangle. You may need to go into the view menu, and enable the inspector - it's at the top of that. You can also just hit "I" (as in the letter 'eye').
When you are importing, you should select the 'total replace' option. There are connections that are not made if you just import that layer.
Edit: I should add that 'total' replace will get rid of any instruments you already have, so use it with caution. If you have a bunch of work done, investigate merging.
Message was edited by: seeren

Separate MIDI Events/By Note Pitch how do I ungroup the tracks?

When using Separate MIDI Events/By Note Pitch it separates the events to individual tracks but they are all grouped by instrument and I'd like to be able to solo and mute them by track. How do I do this without them being grouped by instrument?
Message was edited by: www.peaceloveproductions.com

How do I do this without them being grouped by instrument?
Go to Preferences->Audio/General -> Track Mute/Solo and switch to "CPU Saving ( Slow respond ). This will allow you to mute/solo separately. Same when work with Multi Instrument and midi tracks.
Regards,
Ivan

Events are missing in the calendar in Month view in Blend

Type :
Bug
Initial condition :
The blend software is running. The calendar view is opened.
Action :
Select the month view.
Expected result :
All events are displayed for each day.
Obtained result :
The events of the previous month are missing.

Having the same problems where the UI elements are missing in the layout screen.
using the Show/Hide layout Preview Button I get an Program cannot display the web page.
The server is on a different box . Tried running the sapgui from a vista machine and a xp machine and they both have the same problem.
If I run Sapgui on the server box the Show/Hide layout Preview Button does show a subset on the ui elements but not all the examples described in the "ABAP Trial Version for Newbies: Part 18 - Starting with Web Dynpro for ABAP"
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID1299772950DB10354599868941910736End?blog=/pub/wlg/6973
Thanks in advance.

Portal events are not getting loaded into the Analytics database tables

Analytics database ASFACT tables (ASFACT_PAGEVIEWS,ASFACT_PORLETVIEW) are not getting populated with data.
Possible diagnosis/workarounds tried:
-Checked the analytics configuration in configuration manager, Enable Analytics Communication option checked
-Registered Portal Events during analytics installation
-Verified that UDP events are sent out from the portal: Test: OK
-Reinstalled Interaction analytics component
Any inputs highly appreciated.
Cheers,
Sandeep
In collector.log, found the exception:
08 Jul 2010 07:12:54,613 ERROR PageViewHandler - could not retrieve user: com.plumtree.analytics.collector.exception.DimensionManagerException: Could not insert dimension in the database
com.plumtree.analytics.collector.exception.DimensionManagerException: Could not insert dimension in the database
at com.plumtree.analytics.collector.cache.DimensionManager.insertDB(DimensionManager.java:271)
at com.plumtree.analytics.collector.cache.DimensionManager.manageDBImage(DimensionManager.java:139)
at com.plumtree.analytics.collector.cache.DimensionManager.handleNewDimension(DimensionManager.java:85)
at com.plumtree.analytics.collector.eventhandler.BaseEventHandler.insertDimension(BaseEventHandler.java:63)
at com.plumtree.analytics.collector.eventhandler.BaseEventHandler.getUser(BaseEventHandler.java:198)
at com.plumtree.analytics.collector.eventhandler.PageViewHandler.handle(PageViewHandler.java:71)
at com.plumtree.analytics.collector.DataResolver.handleEvent(DataResolver.java:165)
at com.plumtree.analytics.collector.DataResolver.run(DataResolver.java:126)
Caused by: org.hibernate.MappingException: Unknown entity: com.plumtree.analytics.core.persist.BaseCustomEventDimension$$BeanGeneratorByCGLIB$$6a0493c4
at org.hibernate.impl.SessionFactoryImpl.getEntityPersister(SessionFactoryImpl.java:569)
at org.hibernate.impl.SessionImpl.getEntityPersister(SessionImpl.java:1086)
at org.hibernate.event.def.AbstractSaveEventListener.saveWithGeneratedId(AbstractSaveEventListener.java:83)
at org.hibernate.event.def.DefaultSaveOrUpdateEventListener.saveWithGeneratedOrRequestedId(DefaultSaveOrUpdateEventListener.java:184)
at org.hibernate.event.def.DefaultSaveEventListener.saveWithGeneratedOrRequestedId(DefaultSaveEventListener.java:33)
at org.hibernate.event.def.DefaultSaveOrUpdateEventListener.entityIsTransient(DefaultSaveOrUpdateEventListener.java:173)
at org.hibernate.event.def.DefaultSaveEventListener.performSaveOrUpdate(DefaultSaveEventListener.java:27)
at org.hibernate.event.def.DefaultSaveOrUpdateEventListener.onSaveOrUpdate(DefaultSaveOrUpdateEventListener.java:69)
at org.hibernate.impl.SessionImpl.save(SessionImpl.java:481)
at org.hibernate.impl.SessionImpl.save(SessionImpl.java:476)
at com.plumtree.analytics.collector.cache.DimensionManager.insertDB(DimensionManager.java:266)
... 7 more
In analyticsui.log, found the exception below:
08 Jul 2010 06:50:25,910 ERROR Configuration - Could not compile the mapping document
org.hibernate.MappingException: duplicate import: com.plumtree.analytics.core.persist.BaseCustomEventFact$$BeanGeneratorByCGLIB$$6a896b0d
at org.hibernate.cfg.Mappings.addImport(Mappings.java:105)
at org.hibernate.cfg.HbmBinder.bindPersistentClassCommonValues(HbmBinder.java:541)
at org.hibernate.cfg.HbmBinder.bindClass(HbmBinder.java:488)
at org.hibernate.cfg.HbmBinder.bindRootClass(HbmBinder.java:234)
at org.hibernate.cfg.HbmBinder.bindRoot(HbmBinder.java:152)
at org.hibernate.cfg.Configuration.add(Configuration.java:362)
at org.hibernate.cfg.Configuration.addXML(Configuration.java:317)
at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:796)
at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:652)
at com.plumtree.analytics.core.HibernateUtil.refreshCustomEvents(HibernateUtil.java:496)
at com.plumtree.analytics.ui.common.AnalyticsInitServlet.init(AnalyticsInitServlet.java:104)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1161)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:981)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4045)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4351)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:525)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:920)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:883)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:492)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1138)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:117)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
at org.apache.catalina.core.StandardService.start(StandardService.java:516)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.plumtree.container.Bootstrap.start(Bootstrap.java:531)
at com.plumtree.container.Bootstrap.main(Bootstrap.java:254)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.tanukisoftware.wrapper.WrapperStartStopApp.run(WrapperStartStopApp.java:238)
at java.lang.Thread.run(Thread.java:595)
08 Jul 2010 06:50:25,915 ERROR Configuration - Could not configure datastore from XML
org.hibernate.MappingException: duplicate import: com.plumtree.analytics.core.persist.BaseCustomEventFact$$BeanGeneratorByCGLIB$$6a896b0d
at org.hibernate.cfg.Mappings.addImport(Mappings.java:105)
at org.hibernate.cfg.HbmBinder.bindPersistentClassCommonValues(HbmBinder.java:541)
at org.hibernate.cfg.HbmBinder.bindClass(HbmBinder.java:488)
at org.hibernate.cfg.HbmBinder.bindRootClass(HbmBinder.java:234)
at org.hibernate.cfg.HbmBinder.bindRoot(HbmBinder.java:152)
at org.hibernate.cfg.Configuration.add(Configuration.java:362)
at org.hibernate.cfg.Configuration.addXML(Configuration.java:317)
at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:796)
at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:652)
at com.plumtree.analytics.core.HibernateUtil.refreshCustomEvents(HibernateUtil.java:496)
at com.plumtree.analytics.ui.common.AnalyticsInitServlet.init(AnalyticsInitServlet.java:104)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1161)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:981)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4045)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4351)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:525)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:920)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:883)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:492)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1138)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:117)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
at org.apache.catalina.core.StandardService.start(StandardService.java:516)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.plumtree.container.Bootstrap.start(Bootstrap.java:531)
at com.plumtree.container.Bootstrap.main(Bootstrap.java:254)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.tanukisoftware.wrapper.WrapperStartStopApp.run(WrapperStartStopApp.java:238)
at java.lang.Thread.run(Thread.java:595)
wrapper_collector.log
INFO | jvm 1 | 2009/11/10 17:25:22 | at com.plumtree.analytics.collector.eventhandler.PortletViewHandler.handle(PortletViewHandler.java:46)
INFO | jvm 1 | 2009/11/10 17:25:22 | at com.plumtree.analytics.collector.DataResolver.handleEvent(DataResolver.java:165)
INFO | jvm 1 | 2009/11/10 17:25:22 | at com.plumtree.analytics.collector.DataResolver.run(DataResolver.java:126)
INFO | jvm 1 | 2009/11/10 17:25:22 | Caused by: java.sql.SQLException: [plumtree][Oracle JDBC Driver][Oracle]ORA-00001: unique constraint (ANALYTICSDBUSER.IX_USERBYUSERID) violated
INFO | jvm 1 | 2009/11/10 17:25:22 |
INFO | jvm 1 | 2009/11/10 17:25:22 | at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source)

Key words from the error msg suggests reinstallation of Analytics is needed to resolve this.Analytics database is failing to get updated with the correct event mapping and this is why no data is being inserted.
"Could not insert dimension in the database",
"ERROR Configuration - Could not configure datastore from XML
org.hibernate.MappingException: duplicate import: com.plumtree.analytics.core.persist.BaseCustomEventFact$$BeanGeneratorByCGLIB$$6a896b0d"
"ORA-00001: unique constraint (ANALYTICSDBUSER.IX_USERBYUSERID) violated",
"ERROR Configuration - Could not compile the mapping document

ICal events are missing Day and Month in date

Hello, Sorry if this has been addressed elsewhere - this is such a weird fault I was not sure how to search for it.
My iCal events are missing the Day and Month in their start and end dates - it just shows a 4 digit year which can only be edited as a 4 digit number. All my events are in their correct places but I am unable to create new multiday events.
This applies to old and new events alike. I tried trashing my iCal prefs file but it made no difference.
Anyone any ideas? I am using iCal 3.0.8 on Leopard 10.5.8.
Thanks in advance.

Worked it out - I was using a custom date format to give me day and date in the menu bar - reverting to one of the standard built in 'British' works - but then I lose my day in the menu bar....

Events are not in order

For some reason my events are not in chronological order. If I go to photos, they are, but in events there are some from August stuck in between events in December, and then many events are missing, which again, still exist under photos..

View Menu -> Sort Events...

MIDI events are crazy.

Similar Messages

Maybe you are looking for