Midi interface and Mac G5

Hi guys.
I have G5 and I need midiinterface (say 4*4 or 8*8)
Now I have yamaha UX 96 whith USB. Timing of this interface is no good. All instruments (hardware) have "not strong" quantize after recording.
What interface I need to use?
In other forums I see " USB is no good". Can I make serial port (or else) on G5 and how? Or all I need- Is a good interface?

Have you selected it as the input / output using Audio MIDI Setup which you will find in Applications > Utilities?

Similar Messages

The password I use for installing downloaded applications or installing basically anything isn't working but I didn't change it or let alone touched it. How do I fix this? I'm on an iMac 21.5 inch, Mid 2011 and Mac OS X Version 10.7.3

The password I use for installing downloaded applications or installing basically anything isn't working but I didn't change it or let alone touched it. How do I fix this? I'm on an iMac 21.5 inch Mid 2011 and Mac OS X Version 10.7.3

I've no idea why it has stopped working, but you could reset it:
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

AirDrop doesn'n work between Macbook Pro Mid 2012 and Mac Book Air mid 2013 using both Yosemite

Can't search other devices using AirDrop between between Macbook Pro Mid 2012 and Mac Book Air mid 2013 using both Yosemite...
And trying with MBP late 2011 can't connect either

Hey aniMix,
Thanks for the question. I understand that you are experiencing issues with AirDrop. The following resource provides some troubleshooting information which may be helpful:
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
http://support.apple.com/kb/HT6510
Thanks,
Matt M.

M-Audio USB MIDIsport 2x2 MIDI Interface and macbook pro

i just got a m-Audio USB MIDIsport 2x2 MIDI Interface on ebay, but I can not find drivers so that it will be able to run on my macbook pro (which is obviosly Intel).However, there is one driver that can support it but its for firewire, which dose not make any sence because it is a usb controler.
here is a link to the driver list
http://www.m-audio.com/index.php?do=support.drivers
please help thanks

You must have missed it.
http://www.m-audio.com/index.php?do=support.drivers&k=driver&s=4&p=f808e3999ca85 171bc6c92b8be1d6e2f&o=41&f=676
offers support for both PPC and Intel Macs.
I use it all the time when I travel. Cool and uncomplicated device.
Best,
sonther

I have a Mac Pro Mid 2010 and Mac Pro Mid 2012, both running OS 10.8.5. When working in Illustrator the Display starts to make my Document trasparent and I can see the desktop through my document. I have to toggle my display res back and forth to fix it?

I have a Mac Pro Mid 2010 and 2012 both running OS 10.8.5. Both using ATI Radeon HD 5770 1052 MB vid cards.
Using the standard Display that came with the Macs, everytime I'm working in Ilustrator CS5 or 6, the Document I am working on gets transparent, and I when I try to move a pallete or the Document itself, the pallet or doc leaves trails from where it was to where I moved it. The only way I can resolve it is to open the Display prefs, choose a lower res, then switch it back to the "Best for Display" option. This started happening on both machines after the 10.8.5 update. I have since gone through all the Pram and Board resets, even had Apple replace the Vid Card and nothing helps. Anybody have this issue. It only happens in Illustrator.

Hi Marco@JustALittle,
I really apologise for the inconvenience.
I will have someone from the senior team reach out to you shortly.
Can you please send a private message to me with your contact number and the best time to reach you.
If you dont know how to do that refer : http://forums.adobe.com/thread/1184148

Bind interfaces and mac addresses

I have a server with arch linux installed.
The server has 2 interfaces, and my problem is that sometimes, whenever I reboot the server, I find that the interface names switch - I.E., what was eth0 is now eth1 and vice versa...
Of course, this is a major connectivity problem, which forces me to reboot again, and hope that this time Arch will "get it right"...
I also have several centos/redhat servers in which i found it pretty simple to just add the HWADDR to the ifcfg.ethX file, but i couldn't find anyplace where i can bind the interfaces to a specific mac address in Arch...
Anyone had the same problem before?

attila wrote:
These may be in a future version of Arch's network scripts
I use udev to get a specific name for my network:
KERNEL=="eth*", SYSFS{address}=="MAC_ADRESS", NAME="lan"
This works about a half year without any problems so i hope there will be a warning before doing this because than perhaps i have to change my configuration.
the udev method will continue to work as long as udev doesnt change it's syntax. the method i've suggested will not replace it, rather it will work alongside it.
James

Edirol Audio/Midi Interface and Yamaha Keyboard

Hi everybody,
I just got an Edirol Audio/Midi interface UA-20, installed correctly with latest drivers, garage band recognizes it. Now I want to connect my old Yamaha PSR SQ16 keyboard through it, but somehow it doesn't work. Can anybody please give me a guidance on how to connect it properly, maybe i'm too dumb for that...
Thanks for any help!

I'm shure you must have already figured this out, becouse it's very simple thing to do, but I'll post my answer anyway, perhaps someone else has the same problem.
The Yamaha PSR SQ16 has a "MIDI OUT" plug, in the back of the sinthetizer. To connect with de UA20 Edirol, all you need to do is to get a midi cable (you can find it in every music store) and plug the Yamaha PSR SQ16 MIDI OUT to the Edirol UA20 MIDI IN.
And boy, that's it.
All the fantastic sounds and samples that cames with Garageband, are now triggerd through your Yamaha PSR SQ16.
Things to check: in the AUDIO MIDI UTILITY, be shure that the UA20 is set as de midi in out device.
In Preferences of Garageband, be shure to check that the UA20 is set as audio and midi interface.
Hope this be helpfull.
I apologise for my english, it isn't my first language.
Saludos

Mainstage2 Compatability With Audio/ MIDI Interfaces and Lion?

I've recently upgraded to a new laptop with Lion and my old interface is no longer supported.
Can anyone suggest a small unit that will work with Mainstage2?
I bought the Scarrlet and it works with Logic but not Mainstage2.
Thanks!

ClayG wrote:
I don't think you should be touching the Audio/MIDI setup utility at all if you're just trying to listen to music. Those settings are there for those who do audio recording/MIDI work on their computers.
not true...
I use an external DAC connected through the digital output of the Mac Book Pro...Then, in order to play the music at the correct sample rate I DO have to change the setting in the audio/midi setup if using iTunes as a player.(before even open iTunes)
Amarra is a much better player than iTunes and it change the sample rate by itself without having to do it manually. But the issue remains, I just can not choose 88.2 KHz....
Any other ideas?

Can anyone recommend audio/midi interface LE7 + Mac mini

Hi all!
I've been working with LE 7 for some weeks now. My setup is really simple: a Mac mini, LE7, some free plugs, that's it. Now, I've come to the stage when I need to record guitar, bass, keyboard and add some vocals. Could someone please recommend a decent interface that is compatible with my setup?! I don't have very hi-tech requirements, I just want something that works. No need for lots of inputs, and I've only got one keyboard. FireWire or USB should not matter, unless you know what to prefer. Low budget....
Many thanks in advance!

Firewire Interfaces are always better than USB ones for audio. I really love the Focusrite Saffire but maybe it's more than what you're willing to pay. You could also check out Presonus Firebox or M-Audio FW Solo. However, M-Audio drivers are sometimes a little on the buggy side. If you want to go the USB way, I'd check Tascam's US-122.

HT204291 I can connect to the apple TV but I am not getting display only sound with my IMAC mid 2011 and MAC Air 2012 both with Mountain Lion OS

I just upgraded to Mountain Lion after purchasing Apple TV yesterday from Best Buy.
I have signed in on the same wi-fi network (comcast 30mbps)
I was able to see photos from my wifes Iphone but not my IMac or Mac Air
Both computers connect but I am only getting audio.
I updated software on Apple TV
I shut everything down and reset my router. My Mac Air 13" 2012 was able to see the desk top but not anything that I was doing and then it disconnected.
I also tested the internet speed on the Apple TV but it just told me it was finished. (no results)

WEP as a security measure is laughable nowadays. Even a kindergarten kid with a netbook can crack the password in a few minutes. Try using WPA2 if available on the device. And the Macs will be quite happy connecting with that protocol.

Problems with Lexicon Lambda Interface and Mac OS10.5

Hi everybody
I used my Audio interface Lexicon Lambda for a wile with 10.4 and it worked great. I updated now to 10.5.2 and since then I have buffer problems. I can change all the setting but it just change the time until it happen. Everything sound digital noise, a delay and so on.
For test reasons I went back to 10.4 and it worked fine, now I am back on 10.5 and still problems.
The answer from the Lexicon Pro Support was: "There are no firmware updates for the Lambda; however, there may be software updates for the Leopard OS that improve the performance of your audio application when using the Lambda hardware."
So any ideas, any persons with similar problems? Is it just me, but in my opinion this should be a Lexicon problem, am I wrong?
Thank you for all your answers.
Marco

Leopard is really a different OS. Lots of things have been changed in networking, security, core audio etc.
Changes often carry problems.
A 10.5.3 update is on the go but until then it's better if you remain with Tiger.
cheers
rob

Audio/midi interface compatibility with Logic Express Mac osx 10.6.5

hi all, I'm looking for a compatible audio/midi interface to use with the latest mac os. I recently purchased a Ediroll UA25 but was unable to get it working . I installed the latest drivers from the Roland site but when plugged in it just wasn't being recognised. I sent it back and got a full refund but now I am insure if the Ediroll was faulty or if it wasn't compatible with os 10.6.5. I am now in the process of looking to purchase another interface but am looking for help from you guys.
Thanks in advance,
kiev

Hi,
just out of curiousity: did you use the UA-25 or the UA-25EX? I know the 25EX has a driver switch on it's back where you can enable a standard driver which should be compatible to OS X without an additional driver.
However, i didn't find another interface including a compressor except for the Yamaha Audiogram 6, if you need this feature.
If you don't need it, buy a MOTU, preferably with firewire, or a Presonus. If you want quality, maybe an Apogee Duet. I myself - due to shortage of funds - still use either my Tascam Fireone or my Alesis I/O 2. The Alesis sounds nice for it's price, but i won't buy any of these lower end interfaces anymore. You get what you pay for. I also used the Edirol UA-25EX for a time, but this was before snow leopard, so i can't really say "Yes or No", but it was definitely a very good interface compared to it's price. I won't recommend M-Audio, however, but others like it.
Fox

Logic 7.1.1 and MIDEX8 USB MIDI Interface

Anyone had experience using the Yamaha/Steinberg MIDEX8 USB MIDI Interface with Logic? I've just moved from the PC to Logic on the Mac and since I already own the MIDEX8 I wanted to check first to see that it worked well with Logic before trying to install it. I was advised by the store who sold me the Mac that this would work OK, but was also was advised to get the M-Audio MIDISport 8x8USB as a better choice.
Thanks in advance.
Peter Alexander

You are very welcome. and welcome to the Mac family. I made the move this time last year and I am in heaven. its been like getting out of a ford fiesta and in to a Bentley!
have fun with Logic and the G5.
Ivan

Best MIDI Interface for New Mac Pro's...

Hello Logic Pro Forum Members,
Are there any MIDI Interfaces available that work well with the new Intel Mac Pro Towers? Want to make sure everything works well. Going from an older OS9 setup with an Opcode Studio 5 [is awesome] to a modern G5 with OS-X 10.4x and Intel chips. Need something that's going to work reliably with Logic Audio Pro and the Mac Pro. Have a large hardware based MIDI studio and need at least an 8x8. Would be nice if the interface allows daisy chaining two or more units for extra ports. Anyone know if something good's available? Thank you all! Donnie Dixon.

Hi Donnie
Welcome to the forum. I to came from an Opcode background too and all my family still calls me Donnie
I'll go ahead and recommend the motu midi express to cover your 8x8 needs, it is actually 8x9 and it also allows daisy chaining, and it is intel compatible. Check it out here
http://www.motu.com/products/midi/128/
if you need midi merging too check out the XT version
http://www.motu.com/products/midi/xpressxt_usb/
Have fun
Don

Intel Mac - MIDI Interfaces

Hi Everyone -
Can anyone help me? I have 2 USB MIDI interfaces, both Emagic: an MT4 and an AMT8. Bot work with my PowerBook G4, but I've just bought an Intel Mac, and the drivers don't seem to work; the Intel doesn't recognise either of them. I desperately need a solution to hook them both together, so I can use the standalone versions of the plugins I've bought, NONE of which have yet been successfully ported over to work on the Intel.
Yours, stranded....
Matthew Vaughan
PowerBook G4 Mac OS X (10.4.2)

Hi,
I have the Unitor8mkii,and the first time I used my new intel macbook,it did give me some trouble.The only solution I had,was to unplug the Unitor,and then plug it in again.Apparently,the Mac's AudioMidi setup utility had lost communication with the Unitor.After re-plugging it,AMS saw it,and it has worked great since.I use the unitor8mkii for a Mackie MCU,a Line6 Pod,and an old roland JX3P keyboard,and a now obsolete Edirol PCR30 (not supported on Intel Macs,and discontinued as well)and they all are seen by Logic Pro.
hopefully all you have to do is re-connect the USB cable.Sometimes it gets loose from the Unitor side,so check both ends.

Midi interface and Mac G5

Similar Messages

Maybe you are looking for