Midi Keyboard Won't Record On My Computer.  Need to figure this out quickly

Well it'll record, but sound only plays when my synthesizer (A Juno G) is connected. Once I disconnect it, an error message pops up and no sound is played from the recording. This is pretty useless to me since I won't use the synthesizer for live performances, just for at home recording. There has to be a way to record sounds directly from the keyboard, though the USB Midi port that I'm using, and into logic just like my MPK49 does. The whole reason I bought the synthesizer was to use the built-in sounds for my music.
Also, I searched through my keyboard and Logic manual and I do have the synthesizer's driver installed and all that stuff so I'm thinking it must just be a setting I have wrong.

Krewtaun wrote:
Ok so the audio output would be a port that wasn't midi then?
Besides the midi usb output, it has a separate midi in and midi out as well as 4 individual A and B output jacks and the headphones jack. I'm assuming that I would have to get some sort of connector to use with the output jacks so I can connect it with my computer.
I tried connecting just a double male sided headphone jack wire to the synth and my computer but that doesn't work either. Didn't expect it to allow me to record from the synth onto my computer, but I figured it would play the juno through my computer speakers. It doesn't, though.
So how would I get Logic to play back the MIDI track and record the audio at the same time?
First, in the Preferences/Audio section you have to set the audio to built-in (not mic) Then you may have to go to Utilities/Audio MIDI Setup and select Line-in as the Audio Input.
The Headphone jack to computer should have worked, set the volume on the juno at 1/2 to start. The headphone output goes to the Line-in on the mac.
Someone else will have to jump in here as I need to start rehearsal work and need to empty any technical stuff out of my brain!
Good luck
Oh, you record a MIDI track (create an external MIDI track) Set the Midi Interface to the Juno (probably already is) record the MIDI track, edit it, play it back while recording an audio track.
You REALLY need to sit down, read and learn what you're doing.
You can't expect the forum to help you every step of the way, how do you think we all learned?
pancenter-

Similar Messages

  • My wireless keyboard won't pair with my computer

    help, my wireless keyboard won't pair with my computer.  the green light blinks and it won't sync during the pairing process.

    Did it pair earlier??
    I just lost my Wireless kbd Bluetooth connection twice recently. And found the following solution:
    1. Delete the kbd from Bluetooth system prefs.
    2. Shut down the kbd
    3. In system prefs, keyboard choose "Configure Bluetooth keyboard..." at the bottom
    4. Press the power button on the kbd until the green LED blinks, kbd gets detected
    5. Switch OFF the kbd
    6. Click "Continue"
    7. Power on the kbd as described in 4.
    8. Kbd gets paired, enter the digit code and Enter
    9. Go to system prefs, Bluetooth and add the kbd as a favorite
    That did it for me. Hope it works for you, too.

  • I'm having issues loading Youtube on my MacBook Pro for about a week now.  I'm not sure if this is because of my computer or internet but my sister's PC loads Youtube completely fine.  Can someone help me figure this out?

    I'm having issues loading Youtube on my MacBook Pro for about a week now.  I'm not sure if this is because of my computer or internet but my sister's PC loads Youtube completely fine.  Can someone help me figure this out?

    Hi, I had been having the same problem for over a week, but both my window's HP and my 2011 macbook pro barely could load youtube.  What kind of router you have?  I was using a belkin play router that was only 8 months old, switched to a new AirPort Extreme Base Station and now everything works perfect.

  • I'm burning dvd's that won't play on a regular dvd player.  What am I doing wrong?  Are there some simple things to check to figure this out?  (Sorry, I know this has been asked many times)

    I'm burning dvd's that won't play on a regular dvd player.  What am I doing wrong?  They play fine on computers but not on dvd players.  Are there some simple things to check to figure this out?  (Sorry, I know this has been asked many times).  Created in DVD studio pro.

    Hi
    Just my thoughts to add to the excellent answers above.
    • BRAND of DVD used - Matters when doing Video-DVDs
    Memorex, NoName etc cheap brands usually do NOT work
    I only Use Verbatim (more organic dye in these)
    • Type of DVD - matters
    - DVD+/RW - usually results in problems
    - DL-DVDs are more problematic than SL-DVDs
    - DVD+R are a more modern sort - BUT PLAYS BADLY or not at all on older DVD-players
    I only use DVD-R
    • BURN SPEED - matters
    - Best in iDVD app - IS NOT BEST at all but results in lot's of Burn Errors = Doesn't play well or at all
    I set this down to x2 or x4 max.
    Yours Bengt W

  • My Macbook keyboard won't work and the computer is shutting down at random. Any advice?

    I have a Macbook that is approximately 2 years old. It had water spilt on it but since then everything else is working fine.
    The keyboard won't type at all, it did on the original start up after the water damage was assessed within the computer's shell. Now not at all. I'm using a USB keyboard for the time being.
    Also, it shuts itself off at random. There is a dull click and the screen goes black, then when you attempt to restart it it loads a little and then it clicks and screen goes black again.
    Any advice or suggestions would be greatly appreciated.
    Thanks.

    Hello Rach Ryan
    First I would try closing the app from multitasking and then launching it again. To do that, double tap the Home button and then swipe up on the app to close it completely. If that does not work, then I would restart your iPhone.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Regards,
    -Norm G.

  • Downloaded firefox 7, won't work on my computer, need to be able to redownload 3.6

    I downloaded firefox 7 and drug to my applications folder on my mac powerbook g4 running os 10.5.8. Firefox won't open as it says it is not supported by this architecture. How can i get my old version of firefox 3.6 back and installed?
    Can't find it on your website.
    Please send me a link to download. Thank You

    http://www.mozilla.org/en-US/firefox/all-older.html
    www.mozilla.com -> [http://www.mozilla.com/en-US/firefox/all.html Other Systems and Languages] -> [http://www.mozilla.org/en-US/firefox/all-older.html Firefox 3.6.23] link on right sidebar.

  • HT201274 How do I erase all content and settings on my ipod touch when I don't have my password or the original computer?  I can't figure this out and it is frustrating me.  I need to completely reset my ipod touch. I think it is in dfu mode now

    How do I erase all the content and settings on my 8GB ipod touch without the password or the original computer?  This is very frustrating and I think I have it in the DFU mode.  I can't seem to figure out how to completely restore this ipod touch.  Please help.

    Did you get a message in iTunes that said iTunes found an iPod in recovery mode? If not then you might have not gotten the iPod in recovery mode. Try using this program to get the iPod in recovery mode:
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • Windows 7 and updated firefox window do not load completely . the banner may load or it times out. If I leave it sit for a while it may finish loading. New computer.. cannot figure it out.

    I have a new computer with windows 7. I downloaded the mozilla and the update.. now my pages do NOT load completely. the page banner but not the content. or it takes a really long time. When it will not load it say the try again.. and i reload a number of times to get it to load... HELP ME!!
    I will include an example below... in the URL blank.
    This includes Yahoo and Google...
    occasionally it says ...
    The connection was reset
    The connection to the server was reset while the page was loading.
    The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • I have a imac27" i resently upgraded to osx10.09 and i play d3 but lately my computer , while playing the game all sudden freezes and then boots me out and my computer shuts down and restarts all over again. cant figure this out? any suggestions

    i have a 27inch mac and recently upgraded to operatiing system 10.09. i game d3 and while playing the game it freezes sometimes and then shuts down the computer and restarts for no reason. sometimes with minutes, other times its after many hours. Any ideas would be appreciated.

    could be overheat since the computer also shuts down

  • I have home sharing on my main computer turned on.  But I can't access it from my other computer, ipad or apple tv.  I don't even see the home sharing tab on the left side tool bar on my main computer.  Can someone help me figure this out?

    How do I get this to work properly?

    iOS: Setting up Home Sharing on your device
    Setting up Home Sharing for Apple TV (2nd generation)
    Troubleshooting Home Sharing

  • HT1695 i just got an ipad 2, 32gb, i have  wireless internet thru my phone carrier for my computer, they say i can use up to 5 devices with it, but i cant get the ipad to connect to it, i have tried everything, i think, can u help me figure this out

    i just recieved an ipad2, 32gb, i cant figure out how to get it to connect to my wireless internet.. it is thru my cell carrier, i am suppose to be able to use up to 5 devices with it at the same time.. can someone tell me what i am missing.

    You can not install it.
    Only apps from the official Apple App Store can be installed.

  • So, i changed my apple password. And now when i log into my iMessage it won't allow my new password, or my old one. How do i figure this out?

    Can someone help me with my imessage. I changed my password and now it's not allowing my new password, or my old one.

    Did you purchase Apple Care? If you did, you still have access to Apple Support.  If not, go to your Apple Store and let them help you get it set up correctly.  I'm sure it's something simple we're missing.  Good Luck. 
    Do remember one thing.  iMessage on iPad only works with other iOS devices.  This means you can only text to people who:
    1.  Have an iPhone, iPad, or iPod Touch
    2.  And they have upgraded to iOS 5 or higher

  • How do I use my computer keyboard instead of a MIDI keyboard to enter notes? In Garage Band I simply go to View - musical typing but there is no such prompt in Logic Pro 7.

    Ihave always used my Logic Pro 7 program with a MIDI keyboard for note entry. I do not presently have a MIDI keyboard and wish to use my computer keyboard for note entry. I know this is possible but cannot recall the command to set that up. Can anyone refresh my memory? I know that on Garageband on just need to go to view - musical typing but that is not the command in Logic Pro.

    Hi,
    Hit the Caps Lock key.
    J.

  • Error Result Code -48?  Help...won't record!

    I use G-band for basic VO recording in my home studio into my Powerbook. I run a simple stereo line-in and record to a completely basic stereo track. Nothing fancy. This has worked flawlessly for months.
    Just now, in mid-session, I click on the red Record button and I get this message: Error Result Code -48. It doesn't begin to record at all. The message is immediate, and it won't record.
    This program is pretty vital to my business. Can anyone help me figure this out?? I have restarted the program, shutdown and restarted the Powerbook. No luck.
    Any help?!
    ge

    You could try some web searches. I just know some of them because I've run into them while programming, and have some notes scattered about here and there for some of the less common ones, but not all of them.

  • Ipod won't turn on and computer won't reconize

    my 80gp replacement ipod that i had for 1-2 days just all of a sudden wouldn't turn on and when i try to connect it to my computer the ipod won't connect to my computer. it is almost like the ipod isn't even connect to the computer. need help on this if any body know what to do it would be very appericated

    I've had my 120GB iPod since Christmas and it just happened to me now. I put it into my friend's iPod dock because she was complaining it wasn't working, and I wanted to see if it would work for other iPods. My iPod showed the charging screen, then promptly shut off.
    Hope this problem gets fixed or recognized soon, I don't want to have to switch to CDs in my car again!

Maybe you are looking for

  • How to auto login and pass data (parameter) to ApEx at the same time

    Does anybody know how to automatically login to apex (e.g. from JSP page) and pass a parameter value at the same time? I can use wwv_flow_custom_auth_std to login, I can even choose a page but I cannot pass any data (at least I do not know how). If I

  • Vendor evaluation Transactional ODS

    Hi all, I need follwoing information with respect to supplier evaluation, pulling the data from SRM: 1) what is the differnce between the ODS 0SRVE_O4 and 0SRVE_O2? 2) what is the differnce betwwen the ODS 0SRVE_O3 and 0SRVE_O1? 3) How and when can w

  • Exclusion indicator

    what is the use of exclusion indicator in access sequence ?

  • Q. about recharging, travel, and necessary cables

    I'm interesting in getting an Ipod Nano (1GB black), for personal use but also for travel (vacation, ...). A couple of things aren't very clear to me though, the main reason for this being that Apple.com's store does not give a lot of information on:

  • Responsibility level exclusions

    I have the following SQL SELECT DISTINCT u.user_name, rtl.responsibility_name, ff.function_name,                 ffl.user_function_name            FROM fnd_compiled_menu_functions cmf,                 fnd_form_functions ff,                 fnd_form_f