Midi notes stop after half note

hey
i am making this song in which a midi cello is playing long notes. But when i go to record them, the notes stop making sound after half notes even if i am still holding the key. I have tried going in and editing them and placing them all by scratch in the matrix editor, but the sound stops before the bar has even finished scrolling over the note.
Please help..

Hi G,
check if you have midi information under that track, delete,
also check the even list to spot that info such note off
commands after the note.
See if your charing the same track or same midi track number.
Under midi trhu window (left) gate time if you have some percentage
take it off, I usually left mine at ( - )
Hope this helps you,
best regards,
Jorge

Similar Messages

  • Playback stops after half a second

    Hey guys.
    A friend with a newish macbook pro (no thunderbolt) 8gbs of ram over 100 gbs of free storage downloaded and installed premiere CS4 trial version and everytime he tries to playback the file (m4v) the video stops every half second. Tried rendering video and still had same problem. Never seen this before, any help would be greatly appreciated!
    -Michael

    I see at least 3 problems
    1 - this is the CS5 forum, not the CS4 forum
    2 - what is NOT in the trial http://kb2.adobe.com/cps/407/kb407938.html so that file may not be supported
    3 - grossly underpowered and below specifications... need an OS drive and a data drive, as a minimum
    Trying to use only ONE Hard Drive for Video Editing
    You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
    Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
    You as a person cannot do both at the same time with the same hand
    A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for easy video editing
    One hard drive is not as good as two which is not as good as three

  • My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    Hy myneck,
    Happy Holidays!  The resource below may provide some steps to try if your MacBook Pro won't start.
    Troubleshooting: My computer won't turn on - Apple Support
    http://support.apple.com/en-us/TS1367
    This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
    You don't hear a startup chime.
    You don't hear any fan or drive noise.
    There is no video on your built-in or external display
    If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
    You may hear a startup chime.
    You may hear fan or drive noise.
    You may see a light from the Sleep LED (if your Mac has one).
    Pressing the Caps Lock key on the keyboard causes it to light. 
    If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter. 
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    I hope this information helps ....
    - Judy

  • My MIDI device stops playing notes and starts triggering keyboard shortcuts

    Hello everybody.
    I have a problem,
    My M-audio keystation 61e
    stops playing notes after a while.
    Like it has a about 1 or 2 octaves and
    then any higher or lower you go, they start becoming shorcuts.
    ex. Undo, paste, splice...
    can anybody help me?

    Open the key commands window, turn off MIDI remote. Check you haven't assigned MIDI notes to key commands. Open the controller assignments window, and again check you haven't got weird assignments.
    If in doubt, trash both your Logic preference files and see if it goes away.

  • HT201210 trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know

    trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know why?

    The servers are overloaded. There are a hundred million people all trying to download iOS 7 at one time. Try again later

  • Why do some songs in a playlist not play, or stop after only 1 song?

    I've had several playlists on my ipod that stop after playing 1 song/track, as well as skip over severl songs in that playlist. I know the tracks are good, because I can play them in iTunes, as well as play them one by one manually in the playlist.
    I've restored my ipod to factory settings, then re-synced everything, and i still have this problem.
    I thought the HD may have some bad sectors, so I tried running the Hard Drive scan, but that option does not show up on the I/O menu when I am in diagnostic mode. (I have a separate UNANSWERED post about this too)
    Message was edited by: Tony Cappellini

    You could try a format of the iPod in Windows. A full format does a check and remap of bad sectors on the iPod hard drive, and you would need to restore the iPod as normal (using the iPod updater) afterward. This can also work when the iPod is recognized by the computer, but not by the updater.
    First, put the iPod into forced disk mode.
    See: How to put the iPod into disk mode.
    On your PC, go "my computer" and right click on the iPod, then choose "format". Ensure the settings are at "default" and that "quick format" is not checked. Now select "format". It will take a while, but when that's finished, restore the iPod using the updater.
    To exit forced disk mode, reset the iPod.
    How to reset the iPod.
    You can also check the iPod's hard drive for errors using Windows ScanDisk.
    Put the iPod into disk mode as previously mentioned. Go to "my computer" and right click on the iPod then select "properties", then "tools". Select the option to scan the disk for any errors.

  • Adobe Premiere Pro.exe and Dynamiclinkmanager.exe *32  not stopping after closing PP CS6.03

    PP 6.03 will not restart after closing program.  When I try to re-start nothing happens when clicking on the PP6 icon. Looked in task manager and found that Adobe Premiere Pro.exe and Dynamiclinkmanager.exe *32  are not stopping after closing program. Once I manually stop the processes PP will restart as normal. This is on Win 7 Sp1, HP Elitebook 8760W Matrox MXO2 LE. Also Audio meters are not active during capture, can't change clip name during capture.

    Hello Elcuad, and Canino video,
    Please verify the following steps and report back  your findings:
    - uninstall the currently installed MXO2 effects and drivers
    - go to control panel - user accounts - and locate the account you are using, then drop down the UAC level all the way, ok and reboot
    - download our 7.02 driver with Internet Explorer, followed by our effects
    - after the files are downloaded, right click each file, go to properties, and confirm they are not blocked, if they are click the unblock button
    - reinstall the Matrox driver, again, the one we just downloaded, followed by the effects, reboot
    - go to start, all programs and locate the premiere icon, hold shift and ctrl keys down, and launch this particular icon, keeping the keys down until the application opens up
    - please build a new project and try it out

  • Render engine does not stop after reaching 100%

    It looks like to me that the render engine does not stop after reaching 100%. It does not affect the rendered file which is fine and complete
    -the Pause and Stop buttons are displayed but have no effect on pausing or stoping the render
    -when I want to quit SG, it locks up and have to Force Quit to get out of it.
    I really like the program though and hope you are going to fine tune the UI and make it look like After Effect and Premiere.
    I would encourage you to instaure round tripping between these two apps and SG.
    It would be nice to have curves as well.
    Thanks guys
    Brice

    Could you open the defaultTrace.X.trc files and check for the errors?
    Good from my point of view is to make a search if those files for some stack traces with the string ".dsr."
    Regards,
    Aleksandar

  • My MacMini does not stop after giving the order ''switch off''.What can I do?

    My MacMini does not stop after giving the order ''switch off''.
    It stops only, after pushing the button ''on/off'' for some seconds.
    What can I do?
    frahsun

    boot the Mac into safe mode, repair permissions while in it, then reboot normally.
    if that doesn't help, try resetting the System Management Controller (SMC).

  • My MacBook will not play videos. No sound and the video stops after a few seconds.

    My Mac book pro will not play videos. No sound and the video stops after a few seconds.

    Hello GrahamBIOM,
    I understand while viewing a video or listening to some different content, you lose audio, is that correct? I will do all I can to assist you with this issue.
    Does the issue occur when you have headphones inserted? If you are not sure, if you have a set of headphones available could you test that please?
    Please respond back at your earliest convenience with results.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • My bootcamp download stops after a few seconds. it takes forever but does not move. Could someone help?

    my bootcamp download stops after a few seconds. it takes forever but does not move. Could someone help?

    For Windows Support Software: the download size is around 600MB - 1GB. Depends on your Mac Model. There are server problems but a good idea is to check from iStat menu's or something else if there is some activity.
    Also, make sure that in your network settings:
    Uncheck Automatic Proxy Detection
    Uncheck Passive FTP Mode

  • HT203167 My iTunes Match does not work, it stops after the first step and won't do anything else!!!

    Hello, I purchased iTunes Match for my new iPhone five and it is intended to move the music from my computer to my other computer, but it stopped working on my MacBook Pro, it stopped after the first step. So, my question is, can iTunes Match work if the iTunes in question has other accounts attached to it, of not, can I get a refund on a service that does not work?

    I am having a similar issue with iTunes Match. It keeps hanging up on the same number of files (11035 of 15455) during STEP 2. I've tried signing out, re-opening iTunes, re-booting, etc. Still comesup stuck for hours. What I also don't understand is why the "iCloud Status" option in "View/View Options" disappears intermittently. It was there when I first booted up this morning and I reviewed all my music files to see if there were any "errors" and there werne't any. But after Match gets stuck on the same file niumber (11035) I 've signed out and re-booted and now the "iCloud Status" check box is missing from "View Options" (only the "iCloud Download" option remains present all the time. Please help. (I've also checked to make sure all the music files are within the suggested bit rate parameters and file type - This is also a brand new iMac out of the box). Running out of troubleshooting ideas and beginning to think this service just doesn't work well.

  • HT1551 When streaming a movie or tv show it stops after a short time and does not complete the streaming. comes up as an error occurred loading this content try again later

    When Streaming a movie or tv show it stops after a short time and does not finish downloading. We watch the TV show or movie than nothing !!!
    a message comes up  An error occurred loading this content try again later.  We have unplugged everything rebooted several times and nothing
    helps.  It was working fine until we did a upgrade that showed up on the Apple TV. 
    modle A1427 3rd generation
    Any help would be GREATLY appreciated Nothing on regular TV  miss my Apple TV stuff !!!!

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • Why is the first MIDI note always delayed?

    Hi all
    I'm having some trouble recording MIDI in Logic Pro X. When using virtual instruments (built-in Logic instruments) there is a latency issue with the first note. When recording or playing along, the first note I play has quite audible latency, but everything after that is fine, no latency. If the song is stopped and I am just playing the instrument it's fine, the problem only occurs when recording or playing back. If I am recording, the MIDI note is recorded in the correct place, it sounds fine in playback.
    Really not sure what's going on. I've been looking round on the interwebs, and it seems that others are having the same issue, but I couldn't find any answers that fixed it for me. Any help would be appreciated
    I am running Logic 10.0.7 on a MacBook Pro, using Mavericks.
    Thanks in advance

    This isn't just the first time after I select the track though, even if the track is in live mode it will still have this issue, if I record over and over on the same track, it happens every time. If I hit record, then use pitch bend or something like that during the count in it will be fine, but I have to do this every time I record, and it will create the new region early. I could do this every time I record, but I'm wondering if there's something else I can do to fix it more permanently.
    Thanks for the help

  • How do I move cc 64 (sustain) data in sync when I move midi notes?

    In the matrix editor, when I 'Select All Following' in order to move everything that follows back a few ticks to get rid of a rythmic hesitation, the sustain pedal data doesn't move with the notes. Obviously, this messes up the piano pedaling. Is there a way to 'attach' the controller info to the notes when I move them, or is there a better view window in which to this sort of editing? Thanks!

    I was trying to figure this out myself and didn't understand the previous reply at first. But after a few seconds playing around I got it. If you open the midi matrix editor (in the 'windows' menu) you can select the notes you desire to move. After selecting the notes go to the event list (in the 'windows' menu). You should see the notes you've already selected in the event list highlighted in gray.
    The items listed as 'control' are the sustain pedal controls in the midi information. (you can tweak these number values here as well). Holding the 'shift' key down, click all of the sustain pedal control items that you want to move. They should be within and/or around the already highlighted notes (the list is in order of sequence of the song). Once all is selected you can switch back to the matrix editor and drag the notes where you want them like normal, but you will also be moving the sustain information since you selected it in the event list.
    Also, within the matrix editor itself you can use the view menu and navigate to the hyper draw option and choose sustain pedal. Now you can see the sustain controls under the midi notes and edit the length, etc. You can use the little arrow on the left to change what the hyper draw editing will change as well (volume, sustain pedal, etc.). Hope that helps.

Maybe you are looking for