Midi novice - frustrated, and really need some help!

Hi there,
I'm really frustrated, because I want simplicity and I'm finding that it's taking a very long time to learn all the ins and outs of using Logic. I have spent hours every weekend trying to learn how to use it.
What I want to do, but can't seem to figure out how, is connect my Kawai MP5 (digital stage piano) via USB, and actually use the internal sounds of my piano within Logic. Is there a way to do this using the external instrument within Logic? Or is there another way? I realize I could probably connect it using an audio interface and an audio cable from the piano directly into my macbook, but at this time I don't have an interface. Could somebody just tell me if there is a way to use the internal sounds of my piano within Logic via a USB connection? How to set it up? AND, how to actually hear my piano coming through the speakers once it is connected?
I'd appreciate whatever assistance I can get with this.
Thanks!

MIDI - musical instrument digital interface, and I'm confused because USB is another way to transmit midi data (see wikipedia article which states, " In the years since, MIDI over USB is increasingly common on musical instruments. As other interfaces that used to be used for MIDI (serial, joystick, etc.) disappeared from personal computers, USB became the common interface for connecting MIDI devices."
AND, according to the documentation included with Logic Pro 9 it does appear that this is something I can do.
External Instrument
You can use the External Instrument to route external MIDI sound generators through the Mixer, which you can then process with effects.
You can also use the External Instrument to transmit and receive MIDI information through the instrument channel strip that it is inserted in. This enables you to control an external module—both MIDI and audio—from within one element."
I'm just not sure how to set it up, and get it working.

Similar Messages

I'm getting really frustrated and could use some help

Hello there!
I'm not sure what happened because when I plugged in my ipod today (I have an 8g ipod touch) everything was reset to the basics in itunes. My entire library was delted. Honestly I'm not really that upset by that as I was going to change out all of my music anyways.
My problems are as follows:
I can no longer add more than 1 folder at a time.
          -How can I change it to where I can add multiple folders again?
When I do add a folder it now automatically takes me out of the adding music on your ipod spot (sorry I don't know how else to describe that page) but it takes me out of there and automatically creates a playlist and starts to play the folder I just added.
          -How do I stop it from creating playlists automatically? I absolutely hate playlists. I've never used them and I don't forsee myself useing them anytime           soon.
          -How do I stop it from automatically playing the songs/folders I add?
          -How do I stop it from taking me out of the ipod page and into the playlists page?
My ipod NEVER used to do any of this before so I'm really not sure why all of that changed and why I can't change it back.
My audiobooks tab is gone.
          -How do I bring this back so I can audiobooks again?
I've spent the last couple of hours sifting through manuals, let me tell you 138 pages is a lot to go through, forums and google and a lot of technical jargon and acronyms. All in all, I'm having a heck of a time finding exactly what I need to help me out and I admit I am starting to get really frustrated.
The other day it was so easy, add a couple of folders to the library, select them hit apply and VOILA all was golden. Today, not so much.

I'm still having troubles getting the audio books to appear.
Heres what im selecting.
and then the books tab is still not appearing.
and then as far as adding folders here is what I am doing.
this was how i had it before. it gives me mroe control to choose what i want to add.
that is where i go to add the folder, like i did before.
selecting the folder like normal.
then this box immediatly pops up. not allowing me the option to select and apply any music i may have added.
the music starts playing and it takes me to the playlist page.
but when i click on the ipod icon and go back into this area. the folder is there.
all the steps ive just shown you is how i have ALWAYS done this ever since i got my ipod. Ive never had any of these weird problems utnil today.

I am the biggest "Newb" on this site, and I really need some help please..

Ok, the short of it.... I started training on Database programming about 2 weeks ago. I still don't really know a thing, or even understand the concepts. Now, my boss wants me to fix a bug in Oracle, and I haven't a clue. The ONLY help I've gotten was a link to this forum, and a speech about how I need to help myself. I told him I have the same chance of fixing anything, as monkeys typing hamlet. Anyone up for a challenge?
When I go to Application System, then Application Entry and enter the password a dialog box appears.... "FRM-40039: Cannot attatch library Empower while opening from APPUSRAPP."
That's what I have to fix. I have no clue. I don't even really know how to click around in this program. Please help, someone.
UPDATE: I've been told that everyone's pretty much going to be a jerk to me for asking this, and I'm currently searching old threads and can't find a way to delete this one I posted. So, you could just ignore the post, or jump in and be the internet tough-guy and tell me what I already know.... I'm a newb.
Edited by: user11033020 on Apr 14, 2009 11:41 AM

As this appears to be a Forms error (the error begins with FRM) you might get a better response by posting this in the Forms forum:
Forms
The Community Feedback forum isn't meant for product-related questions (as it says in the title).
Still, you should consider searching Metalink as well. If you've paid for support, you have every right to use it.

Hello I have a few questions and I need some help with my iTunes and iPod

Hello iTunes people.
I have a little problem with my iTunes. I actually almost know nothing about iTunes really. But I have had a 80 gig ipod .. ummm I think it's a iPod classic maybe. A long time ago I just downloaded iTunes. I think one of my tech friends already had put the program onto my PC so I did not even have to download it. Anyways I put my life's collection of mp3's onto iTunes and then syncs it with my iPod and it worked great. Here is my problem. I just recently bought a MONSTER PC. I have lovingly named it " ED209 " I downloaded iTunes for it and I have the most up to date version.8.1.1 is the most current version correct? Ok well here is my problem. What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library. I DO NOT want to import anything from the library or playlist or whatever you call it ONTO the iPod because there is nothing in the library. Now this is were its gets weird and possibly silly. A person I was chatting with on Facebook sort of made fun of me because she was like " Dude! Just push " Sync " But the reason I am paranoid is because THIS is the message I get....
" The iPod " Aaron's iPod " is synced with another iTunes library. Do you want to erase this ipod and sync with this iTunes library? "
HOLY COW!! That girl on Facebook was making fun of me but READ THAT. That exactly says ERASE the "iPod" and Sync with THIS library " It does not say put what is ON the iPod into THIS Library. It says it the other way around. Clear as day it says it will ERASE the " Ipod " it does not say " Fill the library with whats on your iPod "
Do I all of a sudden not understand English or something???? I know how to freaking read and from what it says is sounds a 100 percent like " we will ERASE youe iPod and put everything from this playist or library onto your iPiod" But there is NOTHING in my library? Am I mentally challenged or what?
I hope someone can help me here and I have another request. Could someone just tell me all the cool things I can do with iTunes and my iPod? I am trying to read the help files and the FAQ and whatever else Apple provides you with but it has SO MUCH crap that looks usless. I find myself reading a whole paragraph about some simple little section of s section of a section of a feature! Know what I mean. Someone give me the long and short of the neat things I can do with this stuff. I have windows Vista with a wicked computer that has like 6 gigs of ram and m iPod is a 80 GB Classic
help !!
PROTEUS

*What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library.*
1). Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
3). Once you are connected and your iPod is safely in manual mode there are a few things you can do to restore your iTunes from the iPod. iTunes will only let you copy your purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
For everything else (music from CDs, other downloads and including iTunes purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
A selection of iPod to iTunes utilities:
TuneJack Windows Only (iPhone and iPod Touch compatible)
SharePod Windows Only (iPhone and iPod Touch compatible)
iPod2PC Windows Only
iDump Windows Only
YamiPod Mac and Windows
iPod Music Liberator Mac & Windows
Floola Mac & Windows
iPodRip Mac & Windows (iPhone and iPod Touch compatible)
iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
iGadget Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
4). Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

Storage: I got a 32gig iPad for Christmas - I really need some help.

Storage: I got a 32gig iPad for Christmas, and literally I am already down to 2 gigs of storage left. I believe my iPad is a 4th generation, and currently on my device I only have a 10 apps, 6 photos, 3 personal family videos 10mins in length each, and about 10 disney channel tv shows for my kids. I also have my work email, but I set it to only go back two weeks.
I am not sure what I am doing to eat through this much space so quickly. I realized after downloading 4 tv shows for my daughter I was getting HD, so I did change the other 6 to SD which I know takes less space. However it hasn't really helped. Recently I started using the camera to take a few short movies of my kids 3 videos about ten mins in length each and that ate through space in no time.
My iPad is 32gigs but really only started with 28 gigs capacity.
Is there something I can do? Am I doing something wrong? Sorry I am not the most technically inclined, but a co-worker of mine has an older iPad with thousands of pics, hundreds of songs, plenty of movies, at least 20 apps, etc and her 32 gig iPad still has 12 gigs left. She has WAY more stuff on hers than mine.
I really appreciate any help someone can provide. Thank You.

Ok. Do you know if I delete a show from iTunes on my device can I still redownload it for free? Seems that 13.7 gigs taken up are those disney channel shows. If I delete them I can always just redownload them no?
I appreciate your help. Thanks.

Really need some help been stuck all day on this

ok i'm abit confused I've been stuck on this problem all day and would appreciate your help
Classes Animal, tiger, lion etc all have constructors that take values and work
I'm trying to create an array of animals eg different types and display them all together using a toString
All ive managed to do was get a memoryaddress of the object
I have multiple classes eg abstract base class Animal Tiger extends Animal Lion extends Animal etc
Animal is abstract and has an abstract String toString method
All the derived classes have String toString methods that returns a description
how do i put them all together in arrays and call the string toString for all the different animals
public void displayMethod()
println(objectname);
I have tested the constructors for all classes using a single instance and they work it's just puting them all together in an array and then displaying all the different animals using each classes toString

You are nearly there!
for (int i=0; i<animals.length; i++)
System.out.println(animals.toString());
}Note the use of animals.length in the for loop. This guarantees you only loop over the number of objects in the array and prevents an ArrayIndexOutOfBoundsException.
Edit: Huh? Where did your previous post go? It seems to have disappeared!

I'm not that good with computers and I need some help....

I downloaded Adobe Reader 9.3.3 for windows 7 so I could print out sheet music (pdf file). When I try to open it using Adobe Reader, this pops up:
"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association for this program in the Default Programs control panel"
and I need to know what to do, to fix it. It might be a small problem, but I have no idea what to do. so could someone tell me in detail, how I'm supposed to fix this? thanks,

Felix2000 wrote:
Actually, when I open Adobe Reader (just by itself) the same message appears, and if I close the pop-up, adobe reader closes.
That is very unusual - it appears that the Reader is not installed correctly. Can you open Control Panel, then Add/Remove Programs, and uninstall Adobe Reader. Then reinstall it from http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.3/enu/AdbeRdr933_en_US.exe

Really Need Some Help with CME 8.6 using IOS as Firewall and Anyconnect VPN on Phones

Hello,
I have a 2911 Router with IOS Security and Voice enabled and we are using CME 8.6. I am using a built-in Anyconnect VPN on 3 phones that are for remote users and thus I needed to enable security zones on the router which works because the remote phones will boot up, get their phone configs and I am able to call those remote phones from an outside line.
The issue I am having is that when I try to dial a remote phone connected via the VPN through port g0/0 from and internal office phone, i.e., NOT involving the PSTN then there is no audio. It's as if no audio is going back and forth. When I take off the security zones from the virtual-template interface and the g0/0 interface then the audio works great and I can reach the phone from internal as I am supposed to.
Could someone take a peek at my security config and see why audio would not be traveling through the VPN when I have my security zones turned on?
clock timezone PST -8 0
clock summer-time PST recurring
network-clock-participate wic 0
network-clock-select 1 T1 0/0/0
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.8.1 192.168.8.19
ip dhcp pool owhvoip
network 192.168.8.0 255.255.248.0
default-router 192.168.8.1
option 150 ip 192.168.8.1
lease 30
multilink bundle-name authenticated
isdn switch-type primary-ni
crypto pki server cme_root
database level complete
grant auto
lifetime certificate 7305
lifetime ca-certificate 7305
crypto pki token default removal timeout 0
crypto pki trustpoint cme_root
enrollment url http://192.168.8.1:80
revocation-check none
rsakeypair cme_root
crypto pki trustpoint cme_cert
enrollment url http://192.168.8.1:80
revocation-check none
crypto pki trustpoint TP-self-signed-2736782807
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2736782807
revocation-check none
rsakeypair TP-self-signed-2736782807
voice-card 0
dspfarm
dsp services dspfarm
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
vpn-group 1
vpn-gateway 1 https://66.111.111.111/SSLVPNphone
vpn-trustpoint 1 trustpoint cme_cert leaf
vpn-profile 1
host-id-check disable
voice class codec 1
codec preference 1 g711ulaw
voice class custom-cptone jointone
dualtone conference
frequency 600 900
cadence 300 150 300 100 300 50
voice class custom-cptone leavetone
dualtone conference
frequency 400 800
cadence 400 50 200 50 200 50
voice translation-rule 1
rule 1 /9400/ /502/
rule 2 /9405/ /215/
rule 3 /9410/ /500/
voice translation-rule 2
rule 1 /.*/ /541999999/
voice translation-rule 100
rule 1 /^9/ // type any unknown plan any isdn
voice translation-profile Inbound_Calls_To_CUE
translate called 1
voice translation-profile InternationalType
translate called 100
voice translation-profile Local-CLID
translate calling 2
license udi pid CISCO2911/K9 sn FTX1641AHX3
hw-module pvdm 0/0
hw-module pvdm 0/1
hw-module sm 1
username routeradmin password 7 091649040910450B41
username cmeadmin privilege 15 password 7 03104803040E375F5E4D5D51
redundancy
controller T1 0/0/0
cablelength long 0db
pri-group timeslots 1-12,24
class-map type inspect match-any sslvpn
match protocol tcp
match protocol udp
match protocol icmp
class-map type inspect match-all router-access
match access-group name router-access
policy-map type inspect firewall-policy
class type inspect sslvpn
inspect
class class-default
drop
policy-map type inspect outside-to-router-policy
class type inspect router-access
inspect
class class-default
drop
zone security trusted
zone security internet
zone-pair security trusted-to-internet source trusted destination internet
service-policy type inspect firewall-policy
zone-pair security untrusted-to-trusted source internet destination trusted
service-policy type inspect outside-to-router-policy
interface Loopback0
ip address 192.168.17.1 255.255.248.0
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description Internet
ip address dhcp
no ip redirects
no ip proxy-arp
zone-member security internet
duplex auto
speed auto
interface GigabitEthernet0/1
ip address 192.168.8.1 255.255.248.0
duplex auto
speed auto
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
no cdp enable
interface Integrated-Service-Engine1/0
ip unnumbered Loopback0
service-module ip address 192.168.17.2 255.255.248.0
!Application: CUE Running on NME
service-module ip default-gateway 192.168.17.1
no keepalive
interface Virtual-Template1
ip unnumbered GigabitEthernet0/0
zone-member security trusted
ip local pool SSLVPNPhone_pool 192.168.9.1 192.168.9.5
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/cme-gui-8.6.0
ip route 192.168.17.2 255.255.255.255 Integrated-Service-Engine1/0
ip access-list extended router-access
permit tcp any host 66.111.111.111 eq 443
tftp-server flash:apps31.9-3-1ES26.sbn
control-plane
voice-port 0/0/0:23
voice-port 0/3/0
voice-port 0/3/1
mgcp profile default
sccp local GigabitEthernet0/1
sccp ccm 192.168.8.1 identifier 1 priority 1 version 7.0
sccp
sccp ccm group 1
bind interface GigabitEthernet0/1
associate ccm 1 priority 1
associate profile 1 register CME-CONF
dspfarm profile 1 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 4
associate application SCCP
dial-peer voice 500 voip
destination-pattern 5..
session protocol sipv2
session target ipv4:192.168.17.2
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 10 pots
description Incoming Calls To AA
translation-profile incoming Inbound_Calls_To_CUE
incoming called-number .
port 0/0/0:23
dial-peer voice 20 pots
description local 10 digit dialing
translation-profile outgoing Local-CLID
destination-pattern 9[2-9].........
incoming called-number .
port 0/0/0:23
forward-digits 10
dial-peer voice 30 pots
description long distance dialing
translation-profile outgoing Local-CLID
destination-pattern 91..........
incoming called-number .
port 0/0/0:23
forward-digits 11
dial-peer voice 40 pots
description 911
destination-pattern 911
port 0/0/0:23
forward-digits all
dial-peer voice 45 pots
description 9911
destination-pattern 9911
port 0/0/0:23
forward-digits 3
dial-peer voice 50 pots
description international dialing
translation-profile outgoing InternationalType
destination-pattern 9T
incoming called-number .
port 0/0/0:23
dial-peer voice 650 pots
huntstop
destination-pattern 650
fax rate disable
port 0/3/0
gatekeeper
shutdown
telephony-service
protocol mode ipv4
sdspfarm units 5
sdspfarm tag 1 CME-CONF
conference hardware
moh-file-buffer 90
no auto-reg-ephone
authentication credential cmeadmin tshbavsp$$4
max-ephones 50
max-dn 200
ip source-address 192.168.8.1 port 2000
service dnis dir-lookup
timeouts transfer-recall 30
system message Oregon's Wild Harvest
url services http://192.168.17.2/voiceview/common/login.do
url authentication http://192.168.8.1/CCMCIP/authenticate.asp
cnf-file location flash:
cnf-file perphone
load 7931 SCCP31.9-3-1SR4-1S.loads
load 7936 cmterm_7936.3-3-21-0.bin
load 7942 SCCP42.9-3-1SR4-1S.loads
load 7962 SCCP42.9-4-2-1S.loads
time-zone 5
time-format 24
voicemail 500
max-conferences 8 gain -6
call-park system application
call-forward pattern .T
moh moh.wav
web admin system name cmeadmin secret 5 $1$60ro$u.0r/cno/OD2JmtvPq4w9.
dn-webedit
transfer-digit-collect orig-call
transfer-system full-consult
transfer-pattern .T
fac standard
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-template 1
softkeys connected Hold Park Confrn Trnsfer Endcall ConfList TrnsfVM
button-layout 7931 2
ephone-template 2
softkeys idle Dnd Gpickup Pickup Mobility
softkeys connected Hold Park Confrn Mobility Trnsfer TrnsfVM
button-layout 7931 2
ephone-dn 1 dual-line
number 200
label Lisa
name Lisa Ziomkowsky
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 2 dual-line
number 201
label Dylan
name Dylan Elmer
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 3 dual-line
number 202
label Kimberly
name Kimberly Krueger
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 4 dual-line
number 203
label Randy
name Randy Buresh
mobility
snr calling-number local
snr 915035042317 delay 5 timeout 15 cfwd-noan 500
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 5 dual-line
number 204
label Mark
name Mark McBride
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 6 dual-line
number 205
label Susan
name Susan Sundin
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 7 dual-line
number 206
label Rebecca
name Rebecca Vaught
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 8 dual-line
number 207
label Ronnda
name Ronnda Daniels
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 9 dual-line
number 208
label Matthew
name Matthew Creswell
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 10 dual-line
number 209
label Nate
name Nate Couture
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 11 dual-line
number 210
label Sarah
name Sarah Smith
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 12 dual-line
number 211
label Janis
name Janis McFerren
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 13 dual-line
number 212
label Val
name Val McBride
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 14 dual-line
number 213
label Shorty
name Arlene Haugen
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 15 dual-line
number 214
label Ruta
name Ruta Wells
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 16 dual-line
number 215
label 5415489405
name OWH Sales
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 17 dual-line
number 216
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 18 dual-line
number 217
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 19 dual-line
number 218
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 20 dual-line
number 219
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 21 dual-line
number 220
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 22 dual-line
number 221
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 23 dual-line
number 222
label Pam
name Pam Buresh
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 24 dual-line
number 223
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 25 dual-line
number 224
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 26 dual-line
number 225
label Elaine
name Elaine Mahan
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 27 octo-line
number 250
label Shipping
name Shipping
ephone-dn 28 dual-line
number 251
label Eli
name Eli Nourse
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 29 dual-line
number 252
ephone-dn 30 dual-line
number 253
ephone-dn 31 octo-line
number 100
label Customer Service
name Customer Service
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 32 octo-line
number 101
label Sales
name Sales
call-forward busy 214
call-forward noan 214 timeout 12
ephone-dn 33 dual-line
number 260
label Conference Room
name Conference Room
call-forward busy 100
call-forward noan 100 timeout 12
ephone-dn 100
number 300
park-slot timeout 20 limit 2 recall
description Park Slot For All Company
ephone-dn 101
number 301
park-slot timeout 20 limit 2 recall
description Park Slot for All Company
ephone-dn 102
number 302
park-slot timeout 20 limit 2 recall
description Park Slot for All Company
ephone-dn 103
number 700
name All Company Paging
paging ip 239.1.1.10 port 2000
ephone-dn 104
number 8000...
mwi on
ephone-dn 105
number 8001...
mwi off
ephone-dn 106 octo-line
number A00
description ad-hoc conferencing
conference ad-hoc
ephone-dn 107 octo-line
number A01
description ad-hoc conferencing
conference ad-hoc
ephone-dn 108 octo-line
number A02
description ad-hoc conferencing
conference ad-hoc
ephone 1
device-security-mode none
mac-address 001F.CA34.88AE
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:2 2:31
ephone 2
device-security-mode none
mac-address 001F.CA34.8A03
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:12
ephone 3
device-security-mode none
mac-address 001F.CA34.898B
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
ephone 4
device-security-mode none
mac-address 001F.CA34.893F
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
ephone 5
device-security-mode none
mac-address 001F.CA34.8A71
ephone-template 1
max-calls-per-button 2
username "susan"
paging-dn 103
type 7931
button 1:6
ephone 6
device-security-mode none
mac-address 001F.CA34.8871
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:7 2:31 3:32
ephone 7
device-security-mode none
mac-address 001F.CA34.8998
ephone-template 1
max-calls-per-button 2
username "matthew"
paging-dn 103
type 7931
button 1:9
ephone 8
device-security-mode none
mac-address 001F.CA36.8787
ephone-template 1
max-calls-per-button 2
username "nate"
paging-dn 103
type 7931
button 1:10
ephone 9
device-security-mode none
mac-address 001F.CA34.8805
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:5
ephone 10
device-security-mode none
mac-address 001F.CA34.880C
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:14
ephone 11
device-security-mode none
mac-address 001F.CA34.8935
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:3
ephone 12
device-security-mode none
mac-address 001F.CA34.8995
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:8 2:31
ephone 13
device-security-mode none
mac-address 0021.5504.1796
ephone-template 2
max-calls-per-button 2
paging-dn 103
type 7931
button 1:4
ephone 14
device-security-mode none
mac-address 001F.CA34.88F7
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:23
ephone 15
device-security-mode none
mac-address 001F.CA34.8894
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:26
ephone 16
device-security-mode none
mac-address 001F.CA34.8869
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:28 2:27
ephone 17
device-security-mode none
mac-address 001F.CA34.885F
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:11
ephone 18
device-security-mode none
mac-address 001F.CA34.893C
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:27
ephone 19
device-security-mode none
mac-address 001F.CA34.8873
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:27
ephone 20
device-security-mode none
mac-address A456.3040.B7DD
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:13
ephone 21
device-security-mode none
mac-address A456.30BA.5474
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:15 2:16 3:32
ephone 22
device-security-mode none
mac-address A456.3040.B72E
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:1
ephone 23
device-security-mode none
mac-address 00E0.75F3.D1D9
paging-dn 103
type 7936
button 1:33
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
transport input all
scheduler allocate 20000 1000
ntp master
ntp update-calendar
ntp server 216.228.192.69
webvpn gateway sslvpn_gw
ip address 66.111.111.111 port 443
ssl encryption 3des-sha1 aes-sha1
ssl trustpoint cme_cert
inservice
webvpn context sslvpn_context
ssl encryption 3des-sha1 aes-sha1
ssl authenticate verify all
policy group SSLVPNphone
functions svc-enabled
hide-url-bar
svc address-pool "SSLVPNPhone_pool" netmask 255.255.248.0
svc default-domain "bendbroadband.com"
virtual-template 1
default-group-policy SSLVPNphone
gateway sslvpn_gw domain SSLVPNphone
authentication certificate
ca trustpoint cme_root
inservice
end

I think your ACL could be the culprit.
ip access-list extended router-access
permit tcp any host 66.111.111.111 eq 443
Would you be able to change the entry to permit ip any any (just for testing purpose) and then test to see if the calls function properly. If they work fine then we know that we need to open som ports there.
Please remember to select a correct answer and rate helpful posts

Really need some help here to try and get Fios services in my building

I have been trying to convince my landlord for months to get Fios in the building. Here is a recent email exchange with him. Does anyone know if any of this is true, about the install damages? If it is true, then Verizon needs to get their act together!
Here is the email exchange.
D-
I am sorry but we have no plans to let Verizon in to this building. They do
a lot of damage to the building and do not make the repairs after or pay for
any damages they do.
Thanks,
Steven
-----Original Message-----
From: D
Sent: Tuesday, April 24, 2012 12:19 PM
To: {edited for privacy}
Subject: Question
Hey Steve,
Could you please do me a favor and speak with the building owner once again
about Fios? I know you mentioned he wasn't to keen on the idea of them
doing the install but it would really make a big difference. As of right
now my iPad's cellular connected internet is faster for $30/mo than the
$120/mo I'm paying Time Warner. On top of that, I can't even watch HD
movies on demand. I've had TWC out here twice in the last four months and
every time they claim nothing is wrong. Its very frustrating. I'll do
almost anything I can to assist in this. Please let me know if you can do
anything.
Thank you as always!

james211 wrote:
I have been trying to convince my landlord for months to get Fios in the building.
If your landlord doesn't want FIOS in the building, then it's not going to happen.
Vote with your wallet and move.

My mac has been really slow and i need some help.

I have 770gb of free space.
I use logic pro a lot to make music. i use to have very big projects open and my mac was more then fine my cpu was about 10/15% and now i open the same projects and it shots up to 80/90% and lags and sometimes quits on me.
and i also reinstalled lion 3 times and its still the same. i use to have snow leopard so downgraded my mac thinking it was lion doing this and once it was done it was soo slow i cudent even play a movie with out it laging.
i just ran the activity monitor and logic is using 60/70% of the cpu.
thanks for your help, i really appreciate it.

See how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?In the Memory tab, are there a lot of Pageouts?

REALLY need some help with my problem (Netgear and...

Hi everyone,
Well... where to start really.
This morning around 5am, I lost connection to the net, yet my Netgear (DG834 wired) showed an uptime of 117 hours, so it showed no reboot. It seems my IP profile was raised (As it was low before for my sync).
I had no reboot it seems, but my noise margin went up to 9db from 6db. This is fine as it means I should be getting around 6.5meg IP profile going by the sync. Anyway (This is complicated to explain but bear with me).
My current IP profile is now 7.15K. I know this will come down now to match my sync at 9db (Which should be 6.5meg).
What is happening, is that any change made to my broadband (Like my IP profile being raised this morning) means that I cannot then connect to the net, and anything connected (Like Xbox Live etc) disconnects, even though the router shows no disconnect, and all the lights are green.
The only way for me to reconnect to the internet then is to MANUALLY reboot the router, because no matter what website etc I try to view, it just says "Looking for..." in the bottom left corner of the browser, and I can't connect to anything like Xbox Live etc.
Can anyone explain why this is happening with the Netgear router? Shouldn't any change, like an IP profile increase not affect my broadband connection? It seems whenever a change is made BT side, I have to then manually reboot the router to get online.
I wondered if anyone with a netgear, or anyone with some knowledge on this could tell me why. This could save me a lot of headaches down the line and stop me having noise margin raised etc because I have to manually reboot the router to get it working again. I just thought that any change, like an increase in IP profile etc, shouldn't affect my connnection and force me to have to manually reboot the router to get it up and running again.
I hope you understood what I was trying to explain, and thanks in advance for any responses.

Hi John. Thanks for responding.
I have been through the options on the router and can't find one that says auto connect at all.
It seems the router is not disconnecting though (Like this morning when the IP profile raised), as the uptime on both WAN and LAN were showing 117 hours, and all green lights were on, on the router. It's just when a change on the BT side is made, it won't let me get on the net until I do a manual reboot. It's all very baffling to me really.
I tried googling my problem to no avail also.

Really really need some help and guidance here as I am going nuts!!

I had a laptop with itunes on it and when I connected my iphone it automatically synced and I could move and transfer music from my library to my iphone and vice versa, so all good.
Anyway, one evening I turned on my laptop to see that my itunes icon had just disappeared - literally! No idea why. When looking in the start menu , I found my itunes music in a folder but no icon/itunes facility - all gone.
I looked up this problem on the apple troubleshooting site, and they showed a series of steps to complete to get the icon back, but this failed.
Since then, I have bought a new laptop, so I thought I would just reinstall itunes again which is what I have just done. However, my iphone will not sync to this itunes and I cannot transfer files from itunes to the iphone and vice versa. It's like they will not connect together and I am so frustrated.
Can anyone help me? Please!!!

Installing iTunes does not cause your media to magically appear.
If you want your media on your new computer, then you must put it there.

Really need some help here. My G5 keeps putting itself to sleep and more..

Just out of the blue my mac doesn't turn on. I turned it on a few more times and it still wouldn'tt power up, my screen was just not recognizing anything. So I open up my mac unplug everything, than turn it back on and it works again. But the fan is very loud, I hear grinding noises every now and than, and the weirdest thing is it would not power up unless I took the cover off my mac and removed the plastic bay that protects the inside from dust.
Now it keeps putting itself to sleep. Over and over it's so frustrating.
I'm very concerned here, is this a hard drive problem? I even formated my hard drive, but that did nothing.
What is going on here?

Have you checked the PRAM battery?
I would check it first. When mine went, I had no response from my Mac at all; just a light on my power button; absolutely no boot at all.
Check out things in Texas Mac Man's Battery, PRAM, PMU tutorial on the subject. His tutorial is a little dated (don't believe it even mentions G5's) but the info in it, except SMU not being included, still applies.
I believe this is the battery for a Late 2005 G5 2.5 dual. Yours is near the age it should be replaced.
DALE

I'm no good at setting this thing up, and I need some help.

I have the WAP54G. Basically, I have my Mac (the iMac), a Toshiba laptop with Windows, and an older model PC with Windows. Comcast refused to help when they came over to install our internet, but I have a coax cable running into our modem, and an ethernet cable running from the modem into the Mac.
What we're wanting to do is just run the ethernet cable into the wireless router, and that should just give us all internet access. Right? I mean, it seems to want to work for the Mac minus one problem: it says Linksys requires a password.
My moron roommate tossed whatever instructions came with the router, and I didn't really have much luck with the whole live chat or Mac FAQs. So I'm coming here. Remember, I've never hooked up wireless routers before and what I've already said is about all I know about them: that they apparently need passwords. I've got no idea what it's wanting or how I find it.
Can somebody please help me? This is very frustrating since I have to keep unhooking my internet and re-hooking up the router just to test stuff.
Thanks.

Go to Linksys Download page and download the userguide for your router.
Greetings from Northern Ontario, Canada

GS60 2PE Hopeless really need some help here!!!

Hey MSIer, I just did a complete wipe on my hard drive and now there's totally nothing left on the drive like really nothing so what I wanna ask is that how do I get back all the pre installed software including windows 8.1 itself, how?
Does anyone out there don't mind taking some time to help list down a guide on how to get back to how the laptop originally was(all the pre installed software including windows 8.1 iitself)? Your help is really much much much muchhhh appreciated!!! T_T

Quote from: Syrellaris;112053
You should be able to restore using the Recovery Discs you made(if you made them..) or by pressing the F3 key during bootup.
Though, if you wiped all partitions on the hard drive, including the normally hidden recovery partition you are kind of screwed.. in that case you need to send it in for repair, but it will not be fixed under warranty.(if you dont have Recovery disc's)
Quote from: JakeSully;112055
Yeah best option when getting a new laptop it is to create a recovery dic or USB recovery and atleast .iso recovery to that way incase you wipe everything on hard disk you can restore every partitions that was wiped including recovery partition that has copy of windows 8.1 64 bit that comes pre-installed.
I didn't do any recovery disc and have yet to try the F3 button that you mention. So let say even if the F3 is not working I'm totally screwed right?

Midi novice - frustrated, and really need some help!

Similar Messages

Maybe you are looking for