Midi Parameters not working with FCP X Effects

Hi...
I am creating a FCP X Effect in Motion 5.
In motion I am assigning a Midi Parameter to the Level Input Black Slider.
In Motion it works perfectly and the while turning my midi controller the Levels Input Black follows along, nicely.
Then I apply the effect inside FCP X but nothing happens when I turn the midi controller.
I HAVE published the midi node to the template but it somehow in FCP X it doesnt work...
Is FCP X not capable of Midi ??/
Thanks for any replies...

As you've discovered, that won't work.

Similar Messages

  • Focusrite Saffire interface not working with FCP 4?

    I can't seem to get my focusrite saffire audio interface to work properly with FCP? It works fine with all other apps (itunes, QT, Logic etc) and all the other Studio apps (Motion, DVD Pro and Soundtrack Pro) - but in Final Cut the sound is 'distorted' and 'jumpy'? All focusrite and FCP software is upto date.
    Has anybody else had this sort of problem? Is anybody happily using the saffire with fcp? (I can't seem to find any on the search!)
    it seems strange that it wont work with fcp but work with the other apps of the package? I can't see any sort of settings in fcp to solve this issue? Any help?!

    I am actually only using it to play back audio 'syncd' with picture straight off camera or importing clips from quicktime/DVD's etc. in FCP - it is this that I can't hear correctly? (all the clips are fine by the way played in other aps etc)
    Yes, editing is done in Soundtrack Pro or Logic Pro (used to have pro-tools mbox - but decided to ditch it and go down the Logic route with another interface!) - but I expect to be able to hear basic audio with picture in FCP?
    Sample rates are matched?...

  • Why are none of my midi controllers not working with my new MacBook Pro?

    I am running OS X 10.7.3
    None of my M-Audio midi controllers are syncing with my new MacBook Pro.
    They are all class-compliant and willl work on Mac OS X without the need of a driver is what M--Audio has posted on there website for all of my controllers.
    I am using the following midi controllers:
    Keystation 49e
    Axiom 25
    Trigger Finger
    I purchased my new laptop all most 2 months ago and have not been able to start making music on it since. Lots of issues transitioning to Lion. I am still using my old macbook to make music. Any suggestions?
    Thanks!

    I had the same problem with my apps and your solution worked perfectly! You made my day (:

  • DIVX Converter/Codec not working with FCP and OS 10.7?

    For years, I've used the DIVX Converter/Codec to output video files from Final Cut Pro 7.0.3 via the Export/Use Quicktime Conversion/Divx as a .divx file. But today, after I upgraded my OS from 10.6 to 10.7 and installed the latest version of DIVX Pro, the normal output functions pop the screen showing that the output processing has started, but it then hangs with "0%" showing in that screen. Is DIVX no longer compatible with FCP in 10.7? Or, is there some additional setting change needed somewhere to make it work as usual. Oddly, DIVX has no email contact information on its site's "Support" section and nothing in their forums appears to address this. Any suggestions or info appreciated.

    You ask this question at FCP forum this is FCP X forum https://discussions.apple.com/community/professional_applications/final_cut_stud io

  • Why won't my IMac Mid 2007 not work with ANY Microphone?

    So I have recently received an IMac (Mid 2007) model that is used from my uncle. It is in GREAT condition with one flaw which I found out during a skype call. The mic didnt work. So I opened preferences, went to sound, went to input and saw that it was in "Internal Microphone". I changed it to Line In and used a separate microphone, still didnt work. Used another microphone to make sure it wasnt broken, didnt work. I have been looking online and didnt find anyone with my problem. It is so weird and I can't figure it out. On the other line the only time my friend (in the skype call) could hear anything was when I plugged in the external microphone and he thought it might work. I tried the sound with photo booth, skype, and just plain old volume. PLEASE HELP! I need to skype during my work on the computer!!! Thank you very much!
    Also If you are willing to help out with other questions please do.
    I have seen people run Windows 8 on a Mac product and would be willing to do that if there are no side effects to the cpu. Please tell me if there are any issues doing that, and if not tell me how.
    This computer has 2GB of ram right now and is expandable to 6GB of ram. Is it possible to expand it over 6? And is it very difficult?
    Should I upgrade to Mavericks. It is free and easy to download but I have been told that due to my low ram I should wait until I pump it up to 4 or 6GB of ram and then upgrade.
    THANK YOU SO MUCH!!!

    Isnt line in just a fancy word for a plug that looks like headphones?
    No. The term "line in" refers to the signal level the input can accept. It has nothing to do with the type of socket/plug.
    I just checked what Line in is and i do have a line in spot in my mac. So why would i need to buy the IMic?
    Because you need a microphone-level input, which can accept the lower level of signal that a microphone puts out, and again, no Mac has had a microphone-level input in years. Line level is a much stronger signal.
    So you need:
    - a microphone that puts out a line-level signal. There are a few, but not many.
    or
    - a USB microphone
    or
    - an audio device that can accept a microphone-level signal. The Griffin iMic is one, but there are others.
    Regards.

  • Capture willl not work with FCP 5.1.1 installed on Mac Pro 2.66.

    I need some help, Please!
    Hello, I have just installed my crossover copy of Final Cut Studio 5.1 in a new Mac Pro.
    The only problem that I have encountered is with capture. After running for
    several seconds capture stops and the spinning beach ball makes its entrance.
    After several minutes of spinning the capture moves on for a few more
    frames. Again the beach ball will spin for several more minutes. This continues until I click on
    STOP at which point the spinning beach ball takes over the machine and will
    not give me back control until I turn off my transport/deck. I have reinstalled
    only FCP 5.1(not the other apps. from FCS) with no luck. I didn't uninstall the previous copy. No improvement.
    All my settings are the same as recommended in Easy Set Up.
    The tape and deck work fine on a similar machine with similar software.
    I have also found a similar problem with the installed copy of iMovie.
    This software was used on a G5 before moving it over to Mac Pro with out
    problems. I am at a complete loss. I hope you can embarrass me with a
    simple solution.
    Thank you for your help.

    avidvid, thank you for you advice. I did check the system profiler and the device is
    recognized, but to no avail. In fact it is getting worse. When I initiate log and
    capture I can hear the transport working. It is moving all the time even though
    the capture window is now only showing the color bars. The "beach ball" is now
    constantly whirling and will only stop when the "deck" is turned of at the source.
    I am worried that I have messed up the reinstall. I am really not sure how much
    "stuff" I must remove from the system, or whether to reinstall the entire suite.
    Thanks again for your trouble.

  • Page parameters not working with Omniportlet in 10G

    Hi,
    I have a fresh install of 10G (infrastructure and Portal in separate homes on the same machine). I can create an SQL-based Omniportlet with parameters, and it works fine. When I create page parameters, I cannot map them to the Omniportlet parameters. The "Portlet Parameter Values" section shows my portlet as "No Parameters".
    I have verified that my page group has parameters and events enabled.
    Here is what I'm doing:
    1. Fresh install of 10G with Infrastructure and mid-tier in separate homes on the same machine.
    2. Log in as orcladmin
    3. Create new page group. Open page group properties and click on 'Configure' tab. Verify that parameters and events are enabled. Click Close button.
    4. Add Omniportlet to default region.
    5. Click 'Define' omniportlet
    6. Choose SQL. Enter SQL text 'SELECT table_name FROM user_tables WHERE table_name LIKE :tbl'
    7. Define database connection
    8. Define bind variable Tbl as ##Param1##
    9. Set default value of Param1 to %, and check 'Customizable'
    10. Click 'Next' and accept all defaults until the wizard is done.
    11. See results of query on page.
    12. Click 'Properties' on page header
    13. Click 'Parameters' tab.
    14. When the tab opens, the omniportlet is listed as (no parameters) in the Portlet Parameter Values section.
    15. Create page parameter tbl_name, set default value to %
    16. Cannot map page parameter to portlet parameter, because my portlet is listed as (no parameters)
    Is there anything I can do to make this work?
    Thanks

    Hello
    This is a known issue, that could be fixed easily:
    you need to refresh the OmniPortlet provider from the navigator.
    Regards
    Tugdual Grall

  • Parameters not Working with Links

    Hi everyone, I have a question about opening pdf files with hyperlinks. I am trying to open a pdf file to a specific page number with a hyperlink from a word document. The hyperlink I'm trying to use looks something like this:
    file:///C:folder/file.pdf#page=5
    As far as I can tell, that should open the pdf to the 5th page. But no matter hwat I've tried, the pdf is always opened to page 1. I've trying using various different word processing programs, and even opening the hyperlink with different pdf viewing programs. But even with Adobe reader, the pdf still always opens to page 1. I've also tried opening the file with other parameters, and none seem to work. Interstingly, if I copy and pase the link into my browser (but not open the link with my browser) it works as desired. But I'd rather not copy and paste the link every time I want to open it to the correct page.
    So can anyone offer me a suggestion of why the parameter isn't correctly being applied when I open the document? I'd be really grateful for any help you can offer; thanks.

    Turns out this only affects Firefox, a possible workaround is to set the browser to open new pages in a new window rather than a new tab. It looks like this workaround may work fine in FF 3.0x, but not in FF 3.5.
    This was traced back to a bug in FF. A workaround solution is due to be put into SP3

  • MIDI Keyboard Not Working With Logic Pro X

    I have a MIDI keyboard that I've had for a while. I've upgraded to Logic Pro X, but the keyboard isn't working. I can't hear sound when I play it, nor when I record and try to play it back to myself. What's more frustrating is that I used this keyboard all of the time with Garageband, and there were no issues . It's a simple M-Audio DigiCore MIDI keyboard, and I've updated everything, but I just can't get it to play. I am new to this software, so I'm having a really difficult time navigating this as well, so any help is welcome.

    Ok here's what happened, controller was working fine everything set up, then it quit. called tech help at sweetwater, the motu was not seen as a midi interface anymore...went to motus web site, downloaded update for 10.4.4 THAT WAS IT! now it works!
    Take note....thanks for your replies!

  • M Audio MIDI Keyboard Not Working with Logic 9

    I've M Audio MIDI Keyboard 49, it's working fine with GarageBand but when I go Logic pro and try to record midi it record notes but I can't able to hear that notes and even I play record notes it not playing either. some can help me and can explain me where I'm going wrong?

    Ankeet wrote:
    explain me where I'm going wrong?
    You have forgotten to look in the Logic manual. Keyword: Software Instrument.
    http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=9%26sec tion=1%26hash=appleref:doc:uid:TempBookID-ReplacedWhenAssociatingWithMessierRevision-43984TRA_SC1107-SW7

  • Dsr-11 not working with fcp

    hello all,
    i am running fcp 4.5. last night everthing was working fine. i started an update of my system before i left work. when i came in this morning fcp does not see my dsr-11? its not the dsr-11 as i tried it and the lead connecting it to my powerbook and it works fine.
    help please
    justin

    Read my other reply to this problem in your other post...
    Jerry

  • Compressor not working with mavericks

    My Compressor is not working with FCP get error code, and will not open, gives message can't use with OSX I have and have Compressor 4.0. Of course, Mavericks was free and now have to spend money to get new version of Compressor. No updates are showing in Apple Store. Anyone have a resolution or am I going to have to buy new Compressor?

    SLanceD wrote:
    both came with the computer.
    If you didn't buy from the App Store, you'll have to find your purchase records and contact Apple to sort it out.
    Russ

  • Device not working with Log and Transfer in FCP

    I am trying to get some footage off my camera into final cut pro, but Final Cut Pro does not recognise my device when I try to use Log & Transfer
    The camera is question is a Cannon Legria FS20, here is a link
    http://www.canon.co.uk/ForHome/Product_Finder/Camcorders/flash_memory/LEGRIAFS20/
    I have looked around but can't seem to find any plug-ins to get it to work with Final Cut Pro, does anyone know any way I can get it to work with Log and Transfer
    Upon inspecting the hard drive, it saves video files in .MOD format with an .MOI file (which i assume is a metadata file
    How can I get it so that my device works with log and transfer?
    Thanks

    Hi -
    I did a little Google searching for information on your camera and it appears that it is a Standard Definition Camera that records in the MPEG-2 format.
    Log and Transfer only works with High Definition material.
    You will need to convert your video clips into a format that will work with FCP.
    I know nothing about working in PAL, but you want to download an free application called MPEG Streamclip from
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    This application will convert your MPEG-2 files into a format that you can use directly in FCP.
    Once you have converted the files to Apple DV-PAL, with the correct frame rate (25fps?) and field dominance you can either simply drag the converted files into FCP or import them using File > Import.
    Hope this helps.
    MtD

  • I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.

    I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

    I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

    I know what your'e going through, Gary.   OSX 10.6.7 is an absolute disaster.   Since I upgraded, I've had problems in FCP, Logic, Garageband, even issue dealing with peripheral hardware like external monitors.
    Before 10.6.7 my system was running fine.
    I've brought this up with Apple repeatedly.   They smile and shrug.   They've been helpful resolving the issues, but none of them has been easy to solve.  I have spent days, dealing back and forth with tech support, sending logs, etc., before solutions have been found.  
    I wish I could give you an answer to your question.   My only guess is that Apple has totally dropped the ball on this one.   In the future they should provide a disclaimer when they offer an upgrade.  Something like:   "Caution: all of your software may not function after this upgrade. But go ahead, you'll feel cool that your OS is the latest thing."
    As someone who has been with Apple for close to 25 years, I'm disturbed by what appears to be an increasing sloppiness in their work.   This is especially disturbing when you depend upon their system to make your living.
    Good luck.
    david

Maybe you are looking for