MIDI patch application
I am looking for a MIDI patch application for OSX 10.5.2. I have a few USB MIDI controllers and I would like to use them through the mac to use with my Akai MPC. I know I could open Logic and use that but is there something more "light" to do this? There are plenty of applications that will do this in Windows. But fortunately, I am on mac
The USB MIDI controllers are: MS20 controller & the little Garagekey keyboard. Both connected through USB. The Emagic MT4 is there to route the signals to the outside world.
Thanks in advance!
Duplicate post .. Follow up other one at:
Re: 11.5.10 CU2 patch application unable to locate LoadDTDToClob.class
Similar Messages
-
Query in Oracle 10.2.0.2 Patch application
Hi All,
I need to apply patch for Oracle 10.2.0.2 on HP-Unix IA 64-bit server and when i saw SAP Marketplace, found latest CPU Patch of Janauary 2008 (p6646850_10202_HPUX-IA64) as per note # 1140644.
Along with this i also found 1 note mentioning about Optimizer merge fix patch application as per OSS note # 981875 and so downloaded file p7608184_10202_HPUX-IA64.zip, which is relevant to it.
Now when i read note # 981875 , i found that, it clashes with above mentioned CPU patch and want this to uninstall it and then apply Optimizer patch. And no where then it is mentioning to apply CPU patch again.
So i want to know, do i required now only to apply only Optimizer merger fix patch and not CPU Patch as per 981875 note. Just fyi...CPU patch is of Jan 2008 & Optimizer fix patch is of 01/12/2009?
Please let me know, how to go about it, if anyone has already done this.
Thanks for your answers in advanceHai,
The answer is already in the SAP Note 1140644.
'We recommend that ALL SAP customers import the CPU patch only if it is absolutely necessary'
Risks:
The main risk when you install the CPU is that, as soon as SAP provides a new patch, this patch could clash with the CPU (it may not clash). If a clash occurs, you must decide between the CPU and the new patch.
The reason for the clash is the fixes which you apply from the patch as per SAP Note 981875 are already there in the system after the Installation of the CPU, according to SAP, CPU is a fix for security-related areas.
When you install the CPU patch, you will be informed that this patch is part of the CPU (# are included in the patch currently being installed (6646850). If you continue, they will be rolled back and the new patch (6646850) will be installed ...).
As far as I know, It is better to apply only the Optimizer merge fixes not the CPU once again.
Regards,
Yoganand.V -
Reduce downtime required for support patch application
Dear Experts,
I would like to know if there are any tips / notes we need to follow during application of
support patches to reduce the downtime window ( as during patch application , system is not
usable for normal users ) , any temparary parameter changes to Oracle RDBMS which we can
activate before appication of support patch and then revert the same once Patches are loaded
for normal Day operations.
Is there any note which talks specific settings which could enhance the performance
of support patch application process on Oracle RDBMS.
Regards,
RRTo my understanding if i select Downtime minimized some phases of Patch application could
be carried out when users are online and for others would get notified in SPAM for downtime
, so we just need to lock users and perform start for those rest of Import phases.
Yes this is correct, theoretically you can apply single patches with downtime minimized one after another. But this does not make a lot of sense obviously, because you will have several distinct downtimes then. So to apply one queue containing all packages is the way to go.
Regarding your questions on the benefits, i am afraid the answer here is: it depends, as for most performance tuning options you will have to test carefully if the are working.
For the db_cache_size consider:
- is my db_cache_size smaller than 1000M?
- do i have enough free memory on my server?
- am i seeing low buffer hit ratio while applying support packages?
If all questions are a yes, then i recommend you increase it to 2000M, it is easy to do. But if you don't have free memory on the server, then you will severly hurt performance by causing paging. If you don't have low buffer hit ratio (or you have lightspeed disks , then the tuning will not speed up anything.
As you see, you have options, but there isn't a single speed button that solves your problem.
Regards, Michael -
Patch application in a DataGuard environment!
Just curious if anyone out there has any patch application best practices in a DG environment.
Our environment is:
- Oracle v 10.2.0.3
- Solaris 10
- DG in Physical Standby
We are in the process of applying July CPU patch and just want to check if anyone out there has any recommendations.
Appreciate all your help.Hi, the July Patch can be from Metalink site into Note:432865.1 and the link is
https://metalink.oracle.com/metalink/plsql/f?p=130:14:1963896718475765486::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,278641.1,1,0,1,helvetica
Good luck.
Regards. -
11.5.10 CU2 patch application unable to locate LoadDTDToClob.class
Hi All,
I am applying the 11.5.10 CU2 patch
In between the patch application paused and I got the messgae like this:
ATTENTION: All workers either have failed or are waiting:
FAILED: file LoadDTDToClob.class on worker 1.
FAILED: file LoadXSLTToClob.class on worker 2.
FAILED: file LoadDTDToClob.class on worker 3.
FAILED: file LoadDTDToClob.class on worker 4.
FAILED: file LoadDTDToClob.class on worker 5.
FAILED: file LoadXSLTToClob.class on worker 6.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
I found that the fix for the above said is to set the classpath variable in the ieoenv.sh
I found the ieoenv.sh in the following location:
/d01/oracle/visappl/ieo/11.5.0/admin/scripts/VIS_vision/ieoenv.sh
and the content of the ieoenv.sh is as follows:
IEO_TOP=/d01/oracle/visappl/ieo/11.5.0
I could not find the jdbc111.zip file in this location
How can i proceed further to fix this
Many thanks and best regards...plz post the adworkxx.log and try to following also
1- backup your adovars.env file
2- modify your adovar.env file and substitute appbsorg2.zip by appsborg.zip
3-restart the patch
the jdbc111.zip is under
appl_top/abm/11.5.0/jar/jdbc111.zip
appl_top/fnd/11.5.0/java/3rdparty/stdalone/jdbc111.zip
fadi
http://oracle-magic.blogspot.com -
OWB 10.2.0.4 patch application failed and seek advice.
Hi,
I have read some posts in this forum and tried to solve my problem with OWB 10.2.0.4 patch application. My basic situation is: OWB 10.2.0.3 was installed by someone before. Now developer only can get OWB 10.2.0.4 client. It can not access into existing OWB 10.2.0.3 repository because the version is not matched. I have to apply OWB patch 10.2.0.4 to OWB server. Installing patch is OK. After that, I need to create a test repository to upgrade OWB 10.2.0.3 repository to 10.2.0.4. When I tried to do so. I failed to either a new test repository or even accessed into existing repository. I got different errors as INS0009, ORA-01017 and LRM-00109 with the message as 'unable to connect to database with user SYS, invdlid username/password' Then I followed advices from another thread. Done these steps:
1. SQLNET.AUTHENTICATION SERVICES=(NTS)
2. INIT.ORA, remote_login_passwordfile=exclusive.
3. shutdown database
4. recreate password by using orapwd.
5. startup database and connect as: sys/new_sys_password as sysdba, I connected.
6. select * from v$pwfile_users; I got ' no rows selected'
7. I guess the sys might not have sysdba privilege, Grant SYSDBA to sys; I was feedbacked with ' password file missing or disabled'
I haven't used OWB before and don't know where is the problem that I cannot create a new test repository or access current repository. The password file has been recreated and verified. Why login process failed. By the way, I still use OWB client 10.2.0.3 on my desktop (old) and I have no problem to access into exisiting repository. Please help me to figure out the problem and upgrade my OWB server. Thanks in advance.You don't answer to my question (about name of password file), maybe your problem is caused by incorrect filename.
Also please show instance name with select from v$instance:
select instance_name from v$instance;
Do you show me how to check this?What is the filesystem type where Oracle software installed?
In Windows Explorer open directory ORACLE_HOME\database, rightclick on password file and select Properties from menu.
Select Security tab and select (in Groups ans users list) the user under which Oracle instance service is executed (by default it is user SYSTEM),
in the bottom list (Permissions for ...) check granted rights. -
Setups in Database installation or patch application
Hi all,
In the database installation or patch application, in the unzipped directories you have multiple
setup.exe files along with oui.exe.
For example: in 10g
you have one setup.exe under directory 10gR2_server\database
also you have one setup.exe and one oui.ex under directory 10gR2_server\database\install.
I am wondering what are the differences among those setup.exe and oui.exe. Sometimes we tried the setup.ex in one directory it throw some error and tried another one it works. I am kind of confused.
Thanks a lot for your help,
ShirleyHi Shirley
As far as I know setup.exe is starting the Oracle Universal installer and the oui.exe is called by the setup.exe.
Sometimes your can perform silent install as this:
oui.exe -waitforcompletion -nowait -force -silent -responseFile response_file.rsp
Regards,
Hub -
Patch application paused for patch
Hi All,
The patch application paused while applying the 11.5.10 CU2
FAILED: file LoadDTDToClob.class on worker 1.
FAILED: file LoadXSLTToClob.class on worker 2.
FAILED: file LoadDTDToClob.class on worker 3.
FAILED: file LoadDTDToClob.class on worker 4.
FAILED: file LoadDTDToClob.class on worker 5.
FAILED: file LoadXSLTToClob.class on worker 6.
I found that i have to change the CLASSPATH variable in ieoenv.sh file
I located the ieoenv.sh files in the node at:
/d01/oracle/visappl/ieo/11.5.0/admin/scripts/VIS_vision/ieoenv.sh
in the file i found only the following entry
IEO_TOP=/d01/oracle/visappl/ieo/11.5.0
How can I fix this..
The CU2 patch aplication is paused and in a waiting status to fix this..
Many thanks and best regards....Duplicate post .. Follow up other one at:
Re: 11.5.10 CU2 patch application unable to locate LoadDTDToClob.class -
Audio Midi Setup/Applications/Utilities Settings?
What should the settings be? 8000 - 96000hz? 2ch-16/20/24/32bit? Volume %? My G5 PPC doesn't work with the earphones although it works without them, could this be the problem?
Open Audio MIDI Setup (/Applications/Utilities/), then check the Audio Output setting.
Change the Audio Output setting to 44100.0 Hz.
Quit Audio MIDI Setup.
More info here:
http://support.apple.com/kb/TS1574?viewlocale=en_US -
What is Patch Application Assistant by entering "admsi.pl" & how to run it?
Hi
I am trying to apply patch 6510214 on Oracle Apps R12.0 (Base Release), inorder later to upgrade to R12.0.4.
In Readme Document for patch 6510214, it is written as 'Run the Patch Application Assistant by entering "admsi.pl". How do i run this and also needs steps to upgrade to R 12.0.4.
Please help me.
Thanks
AteeqHi
Regarding this patch_top directory. We have single node installation and path is /vision/patch. How do i check whether it is a correct patch_top directory or not?
When applying 'u driver' patch, in what locations exactly i have to copy downloaded,unzip file in order to apply both on AS and DB server.
Like the steps for applying patch in R11.5.9,are
1 Copy your Patch Zip file to patches folder
2 Unzip your Patches
3 Stop All Services on AS
4 Stop Concurrent Manager on DB Server
5 Source the Environment (AS)
6 Locate Patch Directory
7 Enable Maintenance Mode using adadmin command
8 Apply Patch using adpatch utility
9 Disable Maintenance Mode using adadmin command
10 Depending on Driver type (Repeat steps from 2 to 9)
11 Verify changes as mention in README file
12 Start Concurrent Manager on DB Server
13 Start All Services on AS
Is it the same sequence in R12.0.0 or different? Please put some light on this issue.
Thanks
Ateeq -
Can we patch Applications(ADPATCH) with no downtime using physical standby
Hi ,
As I know I can user Physical standby database for upgrade database with minimal downtime . Can I use the same with patching Oracle application using adpatch.
In other words can we patch Application (using Adpatch) with no downtime using physical standby .
Thanks in advance .
Best Regards,In other words can we patch Application (using Adpatch) with no downtime using physical standby . No.
Business Continuity for Oracle Applications Release 11i, Database Releases 9i and 10g [ID 216212.1] -- Section 4: Applying an Applications Patch
Business Continuity for Oracle Applications Release 12 on Database Release 10gR2 - Single Instance and RAC [ID 452056.1] -- Procedure 4.4 - E-Business Suite Patch Application
Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1] -- Section 7: Oracle E-Business Suite Maintenance with Standby Database
Thanks,
Hussein -
My MIDI Patches keep changing.
I've recently transferred from Logic 5.5 on PC to Logic 7.1.1 on a Mac so I fairly clued-up on using midi program changes in Logic.
I recorded a song with 8 midi tracks, saved it, opened it up the following day and three of the midi tracks were set to the wrong synth patch - not the ones I expected. I did a 'Revert-to-Saved' and the same three tracks set to yet another random patch. They are in the correct MIDI bank though.
Has anyone else seen this behaviour? I never saw it before in Logic 5.5.
Please be gentle if I'm doing something silly - this is my first post.
RikI've got the same problem here (LP 7.1.1 /OsX 10.4.3 ProAppSupport 3.1/ permissions repaired).
It's a bug in Logic and Apple was able to reproduce this when I corresponded by mail to the Apple support (90 days support), 1 year ago.
But Apple is not reactive,
please notice this bug to Apple at Logic Pro feedback:
http://www.apple.com/feedback/logic.html
see my precedent post:
1. Random MIDI program changes:
The command Send to MIDI > Used Instruments MIDI Settings sends sometimes wrong program changes. In fact program changes are duplicated between MIDI tracks.
example: assign MIDI track 1 with program change 1 (program button checked in the instrument's parameter box in arrange window), MIDI track 2 with program 2, MIDI track 3 with program 3 etc... After several commands Send to MIDI > Used Instruments MIDI Setting, track 2 send program 1, track 3 sends program 1, track 4 program 3, it's random.
To reproduce this bug: Assign a key command to Send to MIDI > Used Instruments MIDI Setting, create a multi instrument in the environment window, create a monitor object, link the output of the multi instrument to the monitor, create MIDI tracks in the arrange window, create sequences on each track, assign different programs on each tracks (program button checked) and perform the key command Send to MIDI Used instruments several times, take a look to the MIDI monitor and see the chaos.
What disappointment when you load an old song and the piano play a strings sound or the bass plays a flute sound, and of course you don't remember the originals program changes assigned on the tracks. Of course the problem occurs too when you load a song saved with the option "After loading song send used instruments MIDI settings".
I've experienced that this bug occurs only on dual processors machines under os X. This bug is present since version 5.3 of logic and is always here in version 7.1
I've corresponded with Apple when I bought Logic Pro 7.0 and they were able to reproduce the problem, they recognized that it is a bug, but they don't already fix it in 7.1.
I can't understand how a so big bug can reside into a professional application like Logic for a so long time. I don't understand why almost nobody is confronted to this problem and why there isn't more posts on forums on this subject. Logic's users don't use MIDI? -
Query Functionalities affected after Java patch application 20
Hi ,
We applied Java Patch 20 to our Development System.After this application we are getting Error in running the Bookmarks,error while creating complex formula and the functionalities like Back to Start,Back one Navigational Step are not working properly in BI 7.0 Queries.
Thanks & Regards,
JackieWe have run with this patch for a long time now and have never encountered an issue like this.
Are you using JInitiator or the Java Plugin (recommended)?
Have you tried clearing the JAR cache on the client? Your FMB's also might be corrupted somehow - have you tried rebuilding them on a Developer Suite with the exact same patch level as the Application Server?
You could also try the new super-merge patch 7703734, which supersedes the previous super-merge 7482020, and see if that helps in any way.
If that doesn't help, you should log an SR on Metalink and get Support to help you solving this.
Hope this helps,
Jacob -
Hi all
I am running on <b>MI SP15 with MAM 2.5</b>
I downloaded the DB2E patch <b>db2eV822.zip</b> from SDN downloads and deplyed in my client with MAM2.5 application
In SP15 installation Guide it is mentioned to change entries in Mobileengine.config if we are using FLash card, in my case i am not using Flash cad in my device but want to test the performance using db2e
Can any one guide me in this aspect.
Do i need to change the entries even in Laptop Client also if I deploy in laptop Client ??
thanks
Message was edited by: sam sHi sam,
If you do not need additional funcionalities using DB2E , then you do not have to explicitely change the MobileEngine.config file.
The main thing to note is ,after the fresh installation of MI Client , this DB2E file must be the first application installed on the client device. During first Sync this must happen .
If u are using role synchronization for deploying applications and add-ons in your client devices , and you have to install one application also at the first installation , you have to create one installation sequence for your applications which are to be
installed. Your DB2E data base add-on must have the installation order 1.
Just refer this forum for help.
Re: Regarding DB2E!
refer this also ..
Re: DB2E !!!
Regards
Kishor Gopinathan -
SAPGUI 7.10 patch application to installation server.
I set up SAPGUI 7.10 Installation server on windows. For 6.40,
when applying frontend patches, we use to follow the below procedure:
1) Log into service.sap.com.Click on Downloads.2) Click on support
packages and patch 3) Click on entry by application group.4) Click on
SAP Frontend Components 5) Click on SAPGUI for windows 6) Click on
SAPGUI for windows 6.40 7) Click on win32 and download following
patches BW 3.5 addon patch, sapgui for windows 6.40 patch and sapsetup
for sapgui 6.40. 8) Once all the required patches are downloaded, next
step is to create gui package using those patches. 9)Click on
SAPADMIN.exe, click on apply patch and the patches are applied in the
following order Setup patch, gui patch, BW patch. 10) Click on Browse
and go to the folder where the above patches are located and select the
patch that should be added to the package and click on open. 11) Then
click on install.12) Then you can check the version of installed
patches by click on View--> Server Monitor.
I would like to know, what is the equivalent procedure for SAPGUI 7.10
and where can I find document about it?Try this guide:
http://www.id.uzh.ch/dl/sw/sap/SAPGUI/SAP_FE_Instguide_710.pdf
Maybe you are looking for
-
What is the use of Alternative Calculation Type =2 and 4
Dear Friends In pricing procedure in gross value, Net value for Item and Net value has Alternative calucation type is 2. What is the use of it? Without using it these value line are also fetching net value then what is the work of it. Please give me
-
My headphone jack is unresponsive and audio still comes out of internal speaker
I went to listen to a YouTube video without bothering my wife; plugged in my headphones (both Apple ear buds and SkullCandy cans) but nothing came through them and the audio continued to pipe through the laptops speakers. Plugged in and out 7-8 times
-
SSIS 2012 - Parent/Child Package "Object" Type Variables
How do I pass Variables of Object type from Parent to Child packages? I am using the SSIS 2012 project deployment model. Thanks
-
Error converting Message: 'sun.io.MalformedInputException';nested exception
Hi All, I am using a File to mail scenario, My test file is getting picked up, but is not reflecting in SXMB_MONI and in runtime workbench it is showing like this Retry 14. Message initiation failed: Transform: failed to execute the transform
-
CrystalReportViewer 10.0 vs Crystal ActiveX Report Viewer 10.0
<p>Can someone give me a brief pros and cons of using 1 versus the other. Is the CrystalReportViewer just a wrapper for the Active X Component (with limitations).</p><p> </p><p>This pertains directly to trying to capture (using the CrystalReportView