Midi recording won't play when keyboard is off

Hello all! I thank you for answering my last beginner question. Now I have another for you.
I've gotten my Korg M1 to work by replacing the battery and downloading the factory sounds - not an easy task for a beginner. I've since tried to record from the keyboard onto Logic 8. I have the keyboard hooked up to an M-audio fast track pro and can hear the sounds through my headphones. Everything seems to be working but when I record a track (after choosing external midi device and choosing a channel from the fast track pro option in logic's library), it won't play back unless the keyboard is on. When I turn the keyboard back on, it plays back in the first sound from the sound menu (prob grand piano).
Any and all help is greatly appreciated!

You need to use a Program Change message for each of the MIDI tracks that are playing your M1. Look at the Inspector at the left hand side of the Logic Arrange window and tick the box where it says 'Program', then choose the number of the program you want your M1 to play, so that this will be kept when you save your arrangement.
You'll need to take an audio output from the M1 back to your interface to record as an audio track (create/select an audio track, select the correct Inputs on your interface and arm it). You can mute MIDI tracks except for the one you want to record and record one track at a time that way.

Similar Messages

MIDI regions won't play back in Logic X

Suddenly my MIDI regions won't play back. I can hear the notes when when I play on my MIDI controller and when I mark the MIDI notes in the piano roll, but not when play it back in the arrange window. This worked fine the last time I opened the project.
- I have done a restart of all my equipment, computer and Logic.
- Nothing is muted - not the track or the regions.
- The MIDI in/out in the piano roll is ON.
- The channel strip setting is set to ON.
- This applies to all instruments.
- It works as usual for MIDI written using the pen tool, but not for MIDI played on the keyboard.
- MIDI channel are set to 1 (as seen in the event window).
- Instrument channel is set to "all".
Logic X 10.0.2
OSX 10.8.4
iMac early 2009
2.66 GHz Intel Core Duo
4 GB ram
SATA disc
M-Audio Fast Track Pro, with M-Audio Radium 49.
Does anyone know what could be wrong? Any help is appreciated.
Thanks!

See if this is the problem.
Is this an imported Logic 9 project file?
Check the track Inspector settings and see if you have any over the top values for some of the settings (like Delay)

Some of the songs I have downloaded onto i tunes won't play when I select it to do so. The error message I get is "The song could not be used because the original file could not be found. Would you like to locate it?" How can I get my songs to play?

Some of the songs I have downloaded into i tunes won't play when I select it to do so. The error message I get is "The song can not be used because the original file can not be found. Would you like to locate it?" When I select yes I'm sent to a screen that has my i tunes library listed. When I select the song in question I'm asked if I would like to open the song. When I select this option I get nothing. The songs I have downloaded must be somewhere because they are listed in my i tunes library and on the screen I've been sent to. I can't the songs to play however. This is not true of all of my songs but it is true of quite a few of them. Actually, one song is too many. How do I get my music to play that seems to be locked up somewhere in the computer?

Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

Video/Movie won't play when exported as a PDF.

Hello,
I am creating an interactive PDF using CS5 to display video work. Unfortunately, the video won't play when exported as an interactive PDF, I am just left with blank space. I find this very odd as it plays in preview and also when exported as a SWF but that file type is unsuitable for the project.
Initially when I exported it I got this message: "One or more of the interactive elements are clipped in ways the pdf files can't reproduce...." Obviously, I have ensured the file is resized correctly and also tried .mov, .mp4 and also .flv file types with no success. I have also checked the simple things like ensuring all the right boxes are ticked when I export.
This is not the first time I have embedded video but it is the first time without success despite following the same pattern. Any ideas as to why this would be and how to fix it?
Thank you,
Laura

Use Flv or f4v format, after you have placed video into your layout, make sure that you don´t scale or crop video frame at all.
(Whren you File > Place a video, you will have a loaded cursor with video icon. Click the empty spot on page with loaded cursor, don´t draw a rectangle or click on the top of some exisiting frame)
It´s important that you have your video in 100% encoded size in your layout. If you need to scale or crop it, load that video into Adobe Media Encoder and do it there, and re-encode the video to the correct size and shape aftrwards.
Adobe Media Encoder ships with InDesign.

How do you set a pre-recorded message to play when a caller calls your iPhone before you pick up?

How do you set a pre-recorded message to play when a caller calls your iPhone before you pick up? My office is trying to use an iPhone for our business, and we want to give a brief introductory message that the caller will hear, before we pick up the line. Are there ay apps for this? Thanks!

There is no setting for that on the phone. Some carriers provide ringback tones, which play instead of the caller hearing a ring. But I am not aware of an app that would play a message prior to you picking up the phone. The amount of time before you pick up is not a constant, and if it lasts too long, then the call would go to voicemail.

FLVs won't play when fully loaded (but do play while still loading?)

With the new flash player (10,1,82,76), my FLVs won't play when they are fully loaded. Previous versions had no problems.
Curiously, they will play if I click the play button while they are still loading.
Any ideas are greatly appreciated!

Well, I found a workaround. If I use myflvplayer.seek(0) before calling myflvplayer.play(), it will work since I am not allowing users to pause.
Lame.

Hype widget; audio won't play when previewing on iPad

Hi,
I've come across a strange 'bug' in iBooks Author. Hope someone can help.
I made a widget using Tumult's Hype software. It has multiple scenes, audio and animated text. When previewing the widget in Hype everything works fine. But here comes the strange part;
When I insert the hype widget in an empty iBooksAuthor book the animation and audio works fine when previewing on my iPad2. But when i insert the widget in my iBook, wich has already ten pages filled with text, reviews, etc., the animation work, but the audio won't play when previewing on my iPad.
People from Tumult helped me, but were not able to fix this.
So in an empty book the widget from Hype works fine, but when inserting the widget in a book that has some pages the audio won't play! How can i fix this?
Thanks for the support!

Hi,
I've come across a strange 'bug' in iBooks Author. Hope someone can help.
I made a widget using Tumult's Hype software. It has multiple scenes, audio and animated text. When previewing the widget in Hype everything works fine. But here comes the strange part;
When I insert the hype widget in an empty iBooksAuthor book the animation and audio works fine when previewing on my iPad2. But when i insert the widget in my iBook, wich has already ten pages filled with text, reviews, etc., the animation work, but the audio won't play when previewing on my iPad.
People from Tumult helped me, but were not able to fix this.
So in an empty book the widget from Hype works fine, but when inserting the widget in a book that has some pages the audio won't play! How can i fix this?
Thanks for the support!

Audio won't play when I'm skimming through clips on iMovie

The audio of the clips I have on iMovie won't play when I'm skimming through them, but will play when I play the clips. I made sure the volume of every clip and on the computer works (it does) but this is getting really annoying. Can anyone please help me out?

To Reboot your computer, select /Shutdown... from the top menu. Wait a few seconds, then turn your computer back on with the on switch.
You don't really have to know what a swapfile is, but here is a simplified explanation.
Your computer comes with a processor (Intel 2.8 ghz in my case), memory (2GB in my case), and a hard drive (500GB in my case).
The processor is very fast. The memory holds the instructions and the data that the processor will work on next. Long term storage is kept on the hard drive, which is slower. Think of the following metaphor: You are sitting at a desk. You are the processor. Your desktop is the memory, which contains the stuff you are ready to act on. Stuff you have already acted on, or will not need until later, is in the drawers or in a file cabinet (the hard drive).
Let's say you are working in several applications at once: iMovie, Microsoft Word, iTunes, Calendar, and Safari. Each of these programs needs some of your memory to function, and to get stuff to the processor for action. If you add all the memory requirements up, it may be more than the 2GB of "real" memory that you have. Fortunately, OSX lets you use virtual memory, so your programs can pretend they have as much memory as they need. Your programs can address memory as if they had a whole bunch of memory all to themselves.
This is done through swapfiles. When there is more virtual memory than real memory, the programs and data that have been used least recently are swapped out to hard disk in a swapfile. This file is not the permanent storage. It is the temporary parking place for memory when the real memory is being used by another application.
So lets say you want to use iMovie. It might take up 1GB out of your 2GB. There is not room, so OSX looks around and sees that you haven't used iTunes in a while. So the itunes instructions and music about to be played is swapped our to a swapfile on the harddisk.
If you decide you want to listen to iTUnes, you will have to wait a few seconds as iTunes is swapped back in to real memory, and something else is swapped out.
This is a simple case. It can get more complicated.
But, as you run more and more programs, the real memory gets used up and there might be seven or eight swapfiles out on disk. At some point, OSX gets sluggish and has a hard time dealing with this. For example, if two large swapfiles needed to be paged in at the same time, there might not be room. Also, the real memory can get fragmented, and have open space, but the open space is not big enough to swap something in.
I run a free utility called Memory Stick that shows me how many swapfiles I currently have. If I am working on something critical in iMovie, and I notice that I have a lot of swapfiles, I will usually just reboot and start over with 1 swapfile. In doing this, I hope to avoid the spinning beach ball that happens when OSX can't handle it any more.
You don't really need to know this. OSX handles it for you. But understanding how it works can help you self-diagnose some problems from time to time.

Recording won't play

I signed up to the whole package 5 weeks ago in order to be able to watch the football. I was working today so decided to record the programme to watch when I got home. All I get is a blank screen, I contcated the technical department and they tried another recording which worked fine then told me their was nothing they could do as the recorded file must of been corupted.
I am extremely unhappy as I am paying for a service that I have not recieved. I tried to cancel my contract as they have failed to deliver but was informed that I would have to pay myself out.
Typical of BT once they have you signed up then they don't want to deal with the fact that their system is full of bugs and they are unable to deliver instead they just want your money for a broken product.

You need to use a Program Change message for each of the MIDI tracks that are playing your M1. Look at the Inspector at the left hand side of the Logic Arrange window and tick the box where it says 'Program', then choose the number of the program you want your M1 to play, so that this will be kept when you save your arrangement.
You'll need to take an audio output from the M1 back to your interface to record as an audio track (create/select an audio track, select the correct Inputs on your interface and arm it). You can mute MIDI tracks except for the one you want to record and record one track at a time that way.

ITunes videos won't play when artwork is changed

I have some of my own Quicktime videos that I've imported into iTunes (10.1.2) and they play fine. However, when I change the artwork to something custom (like a jpg of a screencap) the file will no longer play within iTunes. My Macbook Pro still plays it from Finder, and it works fine on my iPad, but not on iTunes.
To add insult to injury, if I then delete the artwork, it still won't play. It's like the file itself has become corrupted. I have to reimport it all over again from another source.

Found another problem. If I playback the file in iTunes, pause it, then right-click and hit "Set Poster Frame," the file also gets locked up. Plus it never actually changes the poster frame / artwork.

Audio soundtrack won't play when burn to DVD or save to a file! HELP!

When I edit and playback a video project, the soundtrack plays back fine. But when I burn to DVD or export to a file, the soundtrack is silent. It DOES still play audiotracks that are from the original video footage, but it won't play the soundtrack song that I added to the video. I have this problem only when I make a HD version. The sountrack source file is in standard WAV format (44.1 khz). The project settings include:
Editing mode HDV 1080i
Timebase 29.97 frames/sec
Video frame size 1440x1080
Thank you for your help!!!

Glad that it worked.
As to why the Fixed Soundtrack sometimes has issues, I haven't a clue. What version of PrE are you working on?
Several users have reported issues with both the Fixed Soundtrack, and Narration Tracks, not working properly, but those cases seem to be Project specific, in that when the same users use those Fixed Tracks, in other Projects, everything works fine. In every case, that I can recall, the "fix" has been to Move the Audio Clips to an empty "regular" Audio Track.
The issues seem to have cropped up in about PrE 7, and continued through PrE 9. Again, because the problems with those Tracks, seems to be Project related, it is tough to diagnose what the real "cause" is. To date, I do not recall anyone having the issues in PrE 10, but maybe no one has hit the right combo of criteria (we have never been able to nail down what those criteria are) in a Project, to cause the problems.
Wish that we could track the problem down to something specific, so we could just say, "Don't do that," but we do not know what "that" is. Until we do, we'll just keep recommending that users Move the Clips to another regular Audio Track.
Good luck,
Hunt

IMovie Audio Files Won't Play when the File is Moved

I imported a lot of audio files into iMovie from my desktop and I set them out how I wanted them in my project. But as my desktop was getting too cluttered, I had to move the audio files into a different folder in my documents, but now the audio files won't play and a warning icon is on each audio clip. Is there a simple way to relocate the files, without moving the files back to my desktop and without having to set out my all my audio files all over again?

Besides the two files you mentioned in your post, you also need to upload YOUR .swf as well. Then you need to upload your music file/folder.
Also double check that the path to your mp3 is correct RELATIVE to the location of the Web page that you placed the .swf on, NOT the physical location of the .swf.
var req:URLRequest = new URLRequest("../Sound/dreamsSound1.mp3");
This needs to be the path from the WEB PAGE to the mp3, NOT the path from the physical location of the .swf.
Once you have the pathing correct, it should NOT work when testing in Flash CS4, because the path to the mp3 needs to be RELATIVE to the Web page.
Best wishes and Good Luck!
Adninjastrator

Flash media (youtube, video, etc) won't play when using Apple TV Airplay Display

I have a new Apple Tv. I have connected it to my tv and am using the tv as a second display from my iMac. The display works just fine, but if I try and play any flash based media, say a Youtube video, on my iMac while Airplay is on, it won't play.
Mind you, it isn't that I am not getting audio, it just won't play the video at all. I can even see the progress bar load fully, but it doesn't begin playing.
The second I turn Airplay off, the video will play.
This also happens with sites such as Soundcloud, and Tumblr audio posts.
Any ideas?

I connect to Airplay Display, I select apple tv, and either mirror display or extended desktop. Doesn't matter which, both have the problem.
Then, on my imac I try to play a video and it does not work. I can even hit play on a video, let it go, and THEN turn on Airplay and it will stop playing as soon as I do.

Copied midi files won't play

Hey, I am new to this forum and I'm hoping someone can help me.
I opened up an old file that I created in Logic 5, and tried to copy some events from the session into a new Logic 8 window. The events appear grayed out (with their original colors around the edge), and with a small circle in the top left corner. It now won't play. I can still see the score/matrix, etc, but no signal is coming out, despite what instrument I select.
I took a screen grab of what I mean, and put it here.
http://i942.photobucket.com/albums/ad266/logicmidiproblem/picture.jpg
Hope you can help me get the sounds back!

K, that sounds simple! This may sound dumb... but how do i do that? Like in the pic I grabbed, the mute button isn't selected/highlighted.

.mov from iPhone won't play when downloaded using mail

And when my daughter sends me movies from her iPhone. Some play, some don't when downloaded using Apple Mail. They all play when downloaded using Gmail. They all play within the mail App on my iPad.
When viewing the information on these files in Finder, the difference seems to be that in the ones that do play, a codec appears likeTin the image:

Scuba Steve,
Sorry, I did click on varkgirl's link instead of yours at first. But clicking on your link, I think I know what you problem is. I think that you problem is that the footer on your page is obscuring the movie controller bar and not letting you click on it. I've been trying to tell people on this forum off and on to pay attention to the values in the Inspector Page tab. What you need to do first is to go under the View menu and select "Show Layout" so you can see what is happening. Now go to the Inspector and click on the Page tab. You will see a set of values that define your page dimensions. What you need to do is to adjust the value for Content Height so that it actually encompasses all of your page content. The space for page content actually dynamically resizes things as you drag them down the page, but this value never changes from the default. It has always been my feeling that this leads to problems in the rendering of pages (depending on browser) because it gives the browser some leeway in how it renders the footer-to-body transition. This can lead to shifting of images up the page or something like you have, which is inadvertant obscuring of elements by the footer element.
So adjust the Content Height to something like 1100. You should see the footer bar in the layout move down. Now fine adjust it so that it is closer to the bottom of your QT movie without obscuring the controller bar. Now republish. I think that you will see that you controller bar now works. BTW. Double clicking on the movie frame will always work as play/pause, too, as you have found.
Let me know if this solves your problem.

Midi recording won't play when keyboard is off

Similar Messages

Maybe you are looking for