Midi sound cracks and stops while editing in matrix

When I use the matrix editor occasionally I get a horrible clicking sound when adding a note, moving a note around or resizing a note using the editor.
The clicking sound is then followed by silence. The only way I can get my sound back is by restarting my Mackie Onyx Satellite interface. This happens every 5-8 clicks of editing in the matrix. Help appreciated.
Thanks

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
The Cloud is not a program, it is a delivery process... a program would be Photoshop or InDesign or Muse or ???

Similar Messages

Copy and Paste While Editing Bookmarks

I am having a problem on my iPad 2 (ios5) copying and pasting while trying to edit bookmarks. I can copy and paste in the name of the bookmark, but cannot on the web address. This has become a problem because I would like to use a bookmarklet and I need to copy and paste the long code. Has anyone else had this issue and fixed it? The bookmarklet I am trying to use is called dotepub and it converts any web page to an epub format. I was shown this by an Apple employee and it worked great for him and will not for me. Thanks for any help.

Hi Gil,
Not a problem (I actually had to Check first)
I have not mentioned iChat 6 as I don't have a version in front of me (Although my son has Upstairs - and he was not here when I posted yesterday)
The iChat 4 Help says
This does require some manual dexterity.
Defcom's solution is a lot more elegant with the features iChat has.
8:23 PM Monday; August 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Sony ICD PX312 screen goes blank and stops while recording

Hi,
i have two Sony ICD PX312 and sometimes while recording it stops by itself. I have Auto Switch Off disabled and i have tried with different batteries. It is quite umpredictable. Sometimes happen, other times not. Aobut 10 o 20% of the times. And it goes off a any time after the beginning of recording.
The problem appears in both of the units i have.
Thanks

If the Integrated Chip (IC) recorder is not recording, stops recording or will not record to a specific file, follow these steps to troubleshoot this issue:
NOTE: Because each of these steps represents a possible solution to this issue, check the recording status after completing each step.
Make sure that the volume control is adjusted correctly.
Check the display for the available recording memory.
Verify the HOLD function is not activated.
If applicable to your model, make sure the VOR function is set to OFF.
Verify that the OPR indicator illuminates when recording.
Adjust the MIC sensitivity setting.
Install a new battery.
The troubleshooting steps listed above should resolve your issue. If you have completed all of the steps and the issue is not resolved, service may be required.
If my post answers your question, please click on "Accept as Solution"

Problems with Ñ and accents while editing flash template

Hello
Please, someone help!
I have been trying to edit the text of a flash template and when i publish it, i cant see the Ñ and the accents
i have been looking for a solution and i have found over the internet:
system.useCodepage = true;
But that does not work, i still cant see that symbols when the file is published.
this is a dynamic generated text from code inside the fla. i am using cs5.
here is the code i have in the template:
var menu_label:Array = new Array("BIENVENIDO", "DISEÑO GRAFICO",
                                 "DISEÑO WEB", "PORTAFOLIO",
                                 "PUBLICIDAD ON-LINE", "IDENTIDAD CORPORATIVA",
                                 "REGISTRO DE DOMINIOS", "CONTACTO",
                                 "ALOJAMIENTO WEB" );
var total:Number = menu_label.length;
var i:Number = 0;
var page:Number;
var main_menu:MovieClip = new MovieClip();
stage.addChild(main_menu);
for( i = 0; i < total; i++ )
    var btn = new flashmo_button();
    btn.name = "flashmo_btn" + i;
    btn.scaleX = btn.scaleY = btn.alpha = 0;
    btn.item_no = i;
    btn.flashmo_bg_color.gotoAndStop( i + 1 );
    btn.flashmo_click_area.addEventListener( Event.ENTER_FRAME, btn_enter );
    btn.flashmo_click_area.addEventListener( MouseEvent.ROLL_OVER, btn_over );
    btn.flashmo_click_area.addEventListener( MouseEvent.ROLL_OUT, btn_out );
    btn.flashmo_click_area.addEventListener( MouseEvent.CLICK, btn_click );
    var each_substring:Array = menu_label[i].split("|");
    btn.flashmo_button_label.fm_label.text = each_substring[0];
    btn.item_url = each_substring[1];
    btn.flashmo_button_number.fm_number.text = ".0" + ( i + 1 );
    main_menu.addChild(btn);
function btn_over(e:MouseEvent):void
    e.target.parent.over = true;
function btn_out(e:MouseEvent):void
    e.target.parent.over = false;
function btn_click(e:MouseEvent):void
    var mc = e.target.parent;
    if( mc.item_url != undefined )
        navigateToURL( new URLRequest( mc.item_url ), "_parent" );
    else
        change_page(mc.item_no);
function btn_enter(e:Event):void
    var mc = e.target.parent;
    if( mc.over == true )
        mc.nextFrame();
    else
        mc.prevFrame();
function change_page(no:Number):void
    page = no + 1;
    play();
var default_volume:Number = 0.60; // 0.00 to 1.00
var bg_music:Sound = new flashmo_music();
var music_channel:SoundChannel = bg_music.play(0, 10000);
var music_volume:SoundTransform = new SoundTransform();
music_volume.volume = default_volume;
music_channel.soundTransform = music_volume;
sound_control.stop();
sound_control.addEventListener( MouseEvent.CLICK, play_pause );
function play_pause(e:MouseEvent):void
    music_volume.volume = default_volume;
    if( e.target.currentFrame == 1 )
        music_volume.volume = 0;
    music_channel.soundTransform = music_volume;
    e.target.play();

Have you embedded the fonts?
You can do it following these steps (I'm using Flash CS4):
Select the textfield (I think is the fm_label).
In the textfield properties, character, you choose "Character Embedding...".
There, you can choose "Basic Latin" for example.
Then, add the characters you need that aren't in "Basic Latin". For example, ñ.
The image below shows what I said.

Sound cracking and other (Pulseaudio) problems

I have pulseaudio installed and sound is all crackling in some aplications. In ekiga when I try echo test when instructions are read sound is good but when it starts actual test it becomes unbarable. I cannot recall if these problems were present before pulseaudio installation.
In open arena the sound is cracking from the start but its still berable. In Windows there arent any problems with this. I have created openaltc as stated in Pulse howto and there is no changes with either options (esd or alsa)
Sounds in movies (gnome-mplayer) and firefox (flash) are great.
BTW I cannot test mic in gnome sound recorder cause of the two errors: Could not negotiate format and than Could not get/set settings from/on resourse
Last edited by christooss (2008-12-02 13:37:46)

LTSmash wrote:
christooss wrote:
I have pulseaudio installed and sound is all crackling in some aplications. In ekiga when I try echo test when instructions are read sound is good but when it starts actual test it becomes unbarable. I cannot recall if these problems were present before pulseaudio installation.
In open arena the sound is cracking from the start but its still berable. In Windows there arent any problems with this. I have created openaltc as stated in Pulse howto and there is no changes with either options (esd or alsa)
Sounds in movies (gnome-mplayer) and firefox (flash) are great.
BTW I cannot test mic in gnome sound recorder cause of the two errors: Could not negotiate format and than Could not get/set settings from/on resourse
Why don't you try to install OSSv4? It has WAY better sound than ALSA, and uses lot less CPU:
http://wiki.archlinux.org/index.php/OSS
Ekiga doesn't work with OSSv4.

Color Settings Images are too warm and light while editing

Can someone help me understand color settings in Photoshop. My images look much lighter and warmer when I edit them than when I export them using Save for Web.
For a while I though it was because I was importing a raw file with a different color depth and profile so when it got saved as a jpg that the colors and brightness would shift. Recently, I made a graphic in Photoshop and it still looked warmer than the export. I also know temperature is displayed wrong in photoshop because when I create a neutral gray color its too warm. When it's exported using save for web the temperature is shown correctly.
If it was a mis calibrated monitor it would look warm all of the time. I'm using Photoshop CS3, my color profile is sRGB with color management turned off (its off because espon recommends this setting because it can better manage colors). Although I tried changing these settings and they don't seem to make a difference. Here's neutral gray image with screen caps to show you what I'm talking about.
http://i14.photobucket.com/albums/a317/pcofran/test/photoshop-color.jpg

Calibration tools calibrate your monitor to produce colors on screen that will look proper given your room lighting. Think of calibration as being a very precise, accurate adjustment to the contrast, brightness, and RGB controls of your monitor. Obviously, if these controls are set differently, your images will view differently. Calibration results in the monitor being set properly for display of images at a known gamma. You can get fairly good, but not totally accurate, calibration visually, without a colorimeter, using appropriate software tools.
Calibration tools also produce a profile that allows color managed software, such as Photoshop, to adjust its output for very precise reproduction within the gamut of your display. Again, there are some tools that produce a profile visually, but you get better results with a colorimeter.
Why should this be necessary? You want to display your images with the intended colors. You also want the proper colors to be sent to your printer or the files on your website. If your monitor isn't properly calibrated and profiled, pixels from the image file that are, say, light gray (RGB 200,200,200) might appear as middle gray, near-white, or even tinged with red or blue. If you adjust the colors in the image file so it displays the way you want it, the pixels in the file will no longer be light gray and will display as something else entirely on a different monitor, when printed, or when viewed at a website.

Cracks and pops while playing anything "above" stereo

Hi!
First of all I have read the sticky about this issue but did not find anything that I think applies.
I recently had a misshappen with my old HTPC (the PSU burned, taking with it the mobo, processor and two harddri'ves ?<img alt="Shocked[/img] src="http://ac3filter.net/forum/Smileys/amunet/shocked.gif">) and I had to build a new box. The specs are the following:
Antec Fusion Remote
Gigabyte MA78GM-UD2H
Athlon 64 X2 7850
2GB Kingston HyperX 066MHz DDR2
500GB Caviar Blue SATA2
X-Fi Extreme Audio
Now the problem (which I have tried to research before posting this) is that every now and then the sound will pop and crackle when playing anything "above" stereo. The signal will cut out so to speak, the amp will lose the connection momentarily to recieve it half a second or so later. At first I thought that grounding might be the issue but as I said normal stereo-stuff like mp3's, youtube etc work without any problems.
The soundcard is from my old HTPC and has worked flawlessly and the same thing goes for the cable (analogue to coax from the digital I/O of the X-Fi with SPDIF enabled).
It happens in VLC, MPCHC and XBMC. So both with AC3 Filter and VLC's internal encoder.
The reason I'm using the X-Fi and not the internal Realtek is that I can not for the life of me get it to work hehe. It is disabled from the BIOS.
So, any help would be greatly appreciated.
EDIT: Using Windows XP SP3 with newest drivers for the X-Fi.
Message Edited by javlar on 08-04-2009 2:59 PM

there is a web application currently that would allow the touch to remotly control ur itunes on ur computer i have not tried it....but it seems like it would be what u are interest in.....
Here is the link to one..
http://www.apple.com/webapps/productivity/roami.html
Here is the link to another one...
http://www.apple.com/webapps/entertainment/signal.html
Hope these help

IPad sound starts and stops

For a few months now the sound cuts out for music, video and all apps. Does anyone know why this happens and how to permanently repair? Plugging and unplugging earphones sometimes gives a temporary fix.
I am on ios7. Thx!

Hello there, Mac990.
The following Knowledge Base article provides some great steps for resolving your issue:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Lightning to 30 Pin Adapter Charging Starts and Stops Intermittently

I purchased two Lightning to 30 Pin adapters, and both are exhibiting the same problem. They seem to start and stop charging intermittently on my iPhone 5, which, to be clear, is not in a case, nor is the adapter obstructed in any way.
I purchased one for a dedicated iPhone/iPad charging station that I keep by my nightstand. The adapters fit flush with the 30 pin connector on the charging station side. At least three or four times during the night, the phone vibrates twice with the "you've just connected to power" alert and wakes me up. Trying the same thing in the car with the other adapter, the iPhone charging starts and stops while connected to my 12v power converter via a Twig cable. When I connect the standard Lightning cable to either the charging dock (through its included USB ports) or directly to the same 12v converter plug in my car's cigarette lighter, I have no trouble charging at all.
Has anyone else seen this behavior? Could I have two faulty adapters (which doesn't seem likely), or is there something in the nature of the adapter that makes it turn on and off the charging on occasion?

I have the same problem. I bought the same type of Speck Candy Shell case that I had for my 3GS iPhone. The $34.00 Lighting to 30-pin adapter will not fit through the case and into the IPhone 5. I just talked to Apple support and after being on hold 5 mins while the tech talked to her supervisor, the Apple solution is "take your case off the phone when you want to use the adapter". I hope thousands of us complain and Apple fixes this. If Apple had not been so secretive and talked to accessory manufacturers they would of know that the Adapter they designed was faulty. Now I how to drive to an Apple store to return the Adapter to get my money back. Only the USB cable will fit through the case into the iPhone 5.
Bad Adapter design my Apple. Thats what happens when you design a product for millions of people - in a secretive bubble.

IOS 5 Sound Quality and Sound Check issues

So since upgrading my iPod to iOS 5 the sound quality of my music has deteriorated massively and sound check no longer works as it should.
Tracks sound crackly and audio volume will remain balanced for a few tracks when sound check is on, then all of a sudden become completely unbalanced and all over the place. My iPod is only just about useable, it's a bit of a disaster that its main feature doesn't work as it should.
Everything else in my iOS5 works as it should.
Any help would be greatly appreciated.
Richard.

Since I bought iPhone4 and listened my songs with "Ipod app" and external speakears I was amazed how brilliant, sharp, intense, clear, perfect bass, perfect trebble the sound was, there was no distortions or saturations ever... The sound quality was just PERFECT with the equalization OFF!!! Not remember if I had SoundCheck ON before but now it doesn't make any difference. I installed iOS 5 over 4.3.1 or so and now sound is just more like noise compared to iOS 4, I have selected all presets or equalizations but ALL are poor, maybe some presets work better with some songs but still they are poor.... Songs did not have clarity!! The volume force was like degraded, now I have to set higher volume to produce same force than before with less volume... iOS 5 max volume (100%) is like iOS 4.2.1 85-90% of volume. Difference is that iOS 5 maximum volume starts slightly to distort or saturate audio quality... before with iOS 4 sound quality was Crystal Clear even with max volume!!! In short SOUND QUALITY is DEGRADED... or perhaps I'm a very critical and nonconformist guy in terms of audio quality... this kind of degradation is quite notorious when one loves music!! or is there some other configuration I'm missing here??
Totally agree with Richard!!
At first I thought it was a problem with my phone... I used to believe iOS 5 was engineered for new iPhone 4S hardware and since it is shipped with dual-core processor, I thought my phone was short in resources!!!
Why max volume is lower in intensity???
Why equalization with the EQ Off changed?? All my songs were stored on iTunes, they must have same sound quality properties as they were when first ripped..
I hope Apple enginneers did not sacrifice volume output force in favor of saving some battery, because normally we charge battery when listening music at home with our personal speakers equipment.
I would like to understand the reasons why the new "Music App" was "changed", and why these changes have to go backwards!! That is sad... because for iPhone or iPod lovers music was always important.
thanks

Sound set to stop but keeps playing

I am creating a progressive download movie for the web using
the flv. In a new Flash doc, I have an imported .mov on one layer,
that was created and exported from a different Flash doc. I have an
mp3 on the layer above the imported .mov. The movie plays fine, but
the sound will not stop, except when I preview it using
Control/"Play".
I used the Properties panel to set the Start/Loop in frame
one of the Sound layer and Stop/Loop in the last frame on that
layer where I want it to stop, I publish the new swf movie and its
flv. I open just the new swf in a browser to check it and all looks
good except the sound won't stop.
Where is my problem? The imported movie shows only on one
frame in the new fla file, so I am setting the Stop for the sound
layer on the last frame based on the original fla that the imported
move was created in.

Learned that if I put the stop in the top layer, it stops.
why is that?

IPhone 4S sounds crackly using my Scoshe Passport with my Scion 2009 XD

Hi there
I have a 2009 Scion XD with a dedicated iPod port. I use a Scoche Passport to be able to listen to my iPhone 4s with the Scion ipod cable and charge at the same time. It worked with my 3Gs. Now with my 4S it works but sounds crackly and has static.
Any suggestions?

I have the same thing happening with a 2009 XB

While editing, my photos stopped changing. Even as the red line moves and music plays, the photo is stuck. How do I fix it?

While editing, muy photos stopped changing. Even as the red line moves and the music plays, the photo is stuck on first frame. How do I fix this?

BDAqua and old comm guy,
thanks so much for the good advice. I used both of these and now the problem has stopped. first I checked the finder crash logs and yes, my finder had been crashing repeatedly.
next I removed the preferences files from the library, rebooted from the CD and ran disk utility to repair preferences. since then my computer has been stable.
there were some preferences that didn't get repaired when I ran disk utility. I am copying them here to refer to later if I need to. I don't understand what these mean to me:
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/pppd" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/vpnd" has been modified and will not be repaired.

While editing in Camera Raw, software stops working and starts spooling

Anyone out there that might have a solution. While editing photos in camera raw, software starts to spool and continues. Only way out is to push power button on iMac to turn it off.

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
The Cloud is not a program, it is a delivery process... a program would be Photoshop or InDesign or Muse or ???

Sound on MacBookPro stopped on internal speaker and when using earphones

Sound on MacBookPro stopped on internal speaker and when using earphones. I re-booted and tried again. No luck.

There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by the warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do notappear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store.

Midi sound cracks and stops while editing in matrix

Similar Messages

Maybe you are looking for