MIDI sync dropping btw Logic8 & Doepfer MAQ 16/3

My Doepfer MAQ just will not stay in sync with Logic 8. using a MOTU Fastlane as the MIDI interface.
This is the first time the Doepfer will not stay in sync with something. Any suggestions?
Thanks

Similar Messages

Audio/MIDI Sync Errors

After working perfectly for months, I now am getting audio MIDI Sync error messages. The result is no audio output either from audio instruments or recorded audio. I am using a MOTU 896HD and audio thru itunes works as long as Logic is not running at the same time. If I switch to built in audio it seems to play back fine.

Stever,
There's a few posts on this over at the Sonikmatter forums.
Two things were recommended.
Toggle the internal clock to ADAT then back to internal.
If that doesn't help, unplug the unit (electricity and firewire) then toggle the voltage selector switch, (putting it back to there it was of course).
After doing this, flip the clock to ADAT then back to internal.
The idea is to reset the unit.
Post back if this works...
pancenter-

MOTU 828MK2 picking up MIDI sync noise from Emagic AMT8???

Probably not an actual Logic problem, as it happens anytime an audio application 'initializes' and contacts my AMT8, but since theres no forum for the AMT8 Apple swallowed up from Emagic, and the drivers only come with Logic, figured I would ask here..
So recently Ive noticed my MOTU 828MK2 picks up the digital noise whenever I send MIDI sync to my AMT8 MIDI interface. If I sync just the MOTU's built in MIDI ports, nada nothing its dead quiet.. The minute sync goes to any port on the AMT8, theres that clock noise coming into my monitors (thankfully it doesnt go into Logic).. Ive checked the back of my desk and nothing is anywhere remotely close to my monitors cabling, the AMT8 is rackmounted literally right under the Furman power strip its plugged into and the adaptor is all by itself sitting right underneath. Tried a new USB cable plugged into different ports even, still picking up that noise.
It has not always been like this, Ive just noticed this behavior within the last few months so Im not sure where to go from here.. If anyone has any ideas of what to look at it Id be much obliged..
HW specs if it matters:
Mac Pro 1,1/OS 10.7.5/Logic 9.1.8
MOTU 828MK2 (Firewire)
AMT8 (USB)
All using the current drivers and latest versions of whatever they need to..

Have you tried initializing the 828MK2?
What's plugged into the AMT8? Have you tried removing MIDI cables one by one and testing?

I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync.

I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not sync more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync process. The hard drive has been upgraded, it has a new logicboard (with 128mb RAM), new housing, battery, hold / headphone jack. Basically the only original parts are the bezel, click wheel, screen, and data ribbons. Have attempted the 3Rs and have also tried to isolate potentially corrupt audio files and remove them, but this did not seem to be the primary cause. The sync failure consistently happens at just under a 1000 songs (5.4gb) and then it starts to error (-69) any song after that. Your advise would be enthusiastically received.

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Can you change and set your own defult midi sync project settings

Hi All,
Can you change the default Midi Sync Project Setting so they have your own settings everytime you start up logic Pro X?
Preferences > Midi > Sync >MIDI sync project settings
General Default:
Frame Rate 25 fps
Check auto detect format of MTC
Default required:
Set frame rate to 29.97fps
check 'auto detect format of MTC'
check Enable Separate SMPTE View Offset
MDI Default is:
MTC and MMC all unchecked
Default required:
Check 'Transmit MTC'
Check 'Transmit MMC'
Check 'Listen to MMC Input'
Any assistance would be appreciated.
Regards,
           Gavin.

No, that's not what I typed above.
The rule is... Preferences are Global, changes made in Preferences affect all Projects.
"Settings" are on a per song basis.
In Logic 9 (and I imagine in X as well) there are two main areas to configure Logic.
1. Is Preferences    Preferences settings are global and affect all projects.
2. Is Settings          Settings are set for each project, they are not global
You typed: Preferences > Midi > Sync >MIDI sync project settings
See what is says, MIDI Sync Project Settings.
Preferences has forwarded you into the Settings area so no, the MIDI Sync options are not global, they have to be adjusted for each song, that's why I suggested setting up templates of your most used project setups.

Apple TV disappearing from iTunes in mid-sync (completely repeatable)

Just in the past week, my Apple TV and iTunes aren't talking very well anymore.
When I start up iTunes, it finds the AppleTV and tries to sync the latest TV show episodes I bought. It gets about 1 and a half episodes in to the sync, then suddenly the AppleTV disappears out of my iTunes and the sync stops.
If I try to view the TV episodes on the Apple TV, it says "The selected video could not be played. The format was not recognized." (clearly, it really did stop in mid-sync).
If I restart iTunes, it still doesn't find Apple TV. I have to reboot my MacBook Pro, then start iTunes again. Then it finds the AppleTV and syncs for about 5 minutes again, then quits...
Completely repeatable and very frustrating. Nothing (movies, music, TV shows) can sync properly if it takes more than 5 minutes to sync. No other issues (can watch trailers and YouTube just fine from AppleTV, nothing else stops working on MacBook).
All software is completely up to date at the latest version;
Any suggestions?

Thanks for you help and suggestions. Unfortunately, I tried all that a couple times ...
- tried "Change iTunes Library" from the source menu and entered new passcode (it appeared in itunes for one minute, then dissapeared again) - tried that quite a few times
- tried changing the name of my aTV
- tried ethernet instead of wireless
- did a factory restore (thinking maybe it was the youtube update)
- started it all from scratch (like i just bought the thing)
It only occurred to me, after reading Ramiro's post, that these issues appeared after the 7.3.2 update; i was smooth sailing beforehand.
keep in mind that i'm a little paranoid when it comes to installing software so i always "fsck -fy" and fix permissions before and after.
After smacking my head a few times, I rolled back to 7.2 and everything works like it used to.
The only thing I'm certain about is that I'm gonna check this forum before I update to 7.3.3. What a headache that was.

ITunes freezes mid sync

I have Windows Vista and the iPhone 3g. I updated to iTunes 10.1.2 yesterday after it had been installed I tried to sync my iTunes to my iPhone, but the everytime I try to do this it stops mid sync. It starts normal and throughout the whole process my phone says that it is syncing but during step 3/5 it freezes in the same spot and won't finish the sync. I have to unplug my phone and close out iTunes. I'm getting super frusterated so if anyone has any idea what's going on please let me know.
I also ran a diagnostics sync test and it came back normal so I'm assuming this isn't a syncing issue as much as it is an iTunes issue.

Can you see what step 3 exactly is? If you watch closely, iTunes mentions the steps underneath the progress bar.
My steps are 1st backup, 2nd contacts, calendars, bookmarks, notes, 3rd apps from and to the computer, 4th was too fast, couldn't read what it said, and finally photos as step 5.
So, there must be something going wrong during the app sync. Did you check your restrictions on the phone, to make sure installing apps or removing them is not restricted?
Did you check your security software settings? iTunes may need to contact Apple during the sync process as well. http://support.apple.com/kb/TS3125

Cant download itunes and phone stuck mid sync

My Iphone was disconnected mid sync today thanks to a bit of a dash and a 7 year old kid so everytime i turn the thing on all i get is the Itunes connect screen with the USB cable saying connect to Itunes.
I thought i would get to my partners laptop when i was able to, download Itunes and fix it but now everytime i try to download Itunes i have this message on the Itunes screen "Apologies but there has been an unexpected error with this application. This problem has been noted, and an email has been sent to the administrators. Please check back in a few hours and try to download again" Its been like this for a while now,
Is there any way that i can get my phone up and running or do i need to wait to get an Itunes then finish the update? Im guessing my phone is stuck mid operating system update!!
Thanks

Problem solved, http://www.apple.com/itunes/download/
I can download itunes!

My ipod touch 3rd gen fails to restore and disconnects its self mid sync. How can I fix that?

Its really annoying. Idk what happened to make it act this way, (i'm thinking the recent update for iOS 4.3)
First, it connects normally and says that there's an update for the ipod. I download it and let it install, then for some reason while starting back up, it failed. I guess it lost its connection or something but mid restart the progress bar stopped at no more than a sixth and stays there till I disconnect it physically and retry the prossess. I tried that for 3 hours, but it always failed, so I connected it to my other computer and it restarted properly with the new iOS. I tried connecting it to my main computer (with all the music and apps) and tried restoring it with all my apps and photos and things, but it failed once again like when restarting. Every time it connects, it automatically syncs like it normally should, but it doesn't sync properly and complains that the ipod is disconnected when it is clearly connected.
Currently, I don't have any of my apps on it, I only have 2 gb of music on it, and it doesn't sync what so ever. I click and drag a playlist or app to sync, says that its doing it, but then stops after 5 seconds without doing a thing saying "its ok to disconnect". Its really annoying me. Help please??
(btw. I don't think its the cable because it did work with the other computer)

Try a manual install following directions in link below.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  120G Vertex 3 SSD Boot HD 

Audio midi sync error in logic and other apps

hey everybody,
after a system update, all my audio apps freakout when they have to playback midi channels. audio tracks work perfectly in all apps i use but using midi just clips the cpu meter all the way. in live for example which i use 100% midi, droputs and digital distortion will occur alsmost as soon as i press play. in logic it will take a few more seconds until the audio sync error appears asking me to check external devices. the thing is, although i usually output to my mbox 2, i have disconnected everything i use and have been trying it with the built in outputs and it's still happening.
please note all of this was not happening before the update and the exact same projects played back fine before. i'm positive it's something to do with midi. for example ableton live has been creating text files to its preferences folder titled midijitter etc. etc.
thanks for any bits help!
cheers

Hi,
I have the same problem. The problem happened after a system update (few days ago). I don't know which update caused this.(I updated several applications )
I re-installed Mac OS. I updated everything that the system updater suggested. And finally I tested with my applications. The problem still continues:
Sibelius, Pro Tools (and other applications using midi) can't play midi files correctly.
I also tested Quicktime; It can't play midi files correctly.
Thanks

Midi / USB drop out since Lion upgrade!

Hi all, i have had great responses and success in the past with this forum, i really really hope this will continue.
I have been gigging using mainstage 2 and a M-Audio Oxygen midi keyboard controller for a few years now and until lately it's been fantastic. I will never go back to a stand alone manufactured synth. I am using a macbook pro, 2.93ghz with 8 gb ram. I initially upgraded from snow leopard to lion when it was launched but had to go back as Creative hadn't any lion drivers for use with my emu 0202 audio interface. Last month i found that they had done them and i re-upgraded to Lion. Since the upgrade i am experiencing Midi drop outs. This is to say that whilst performing i get an error message saying something like midi input device no longer available. This has happened a few times now but last night (new years eve!!), not only did i get this message which i sorted with a reboot but a few minutes later i had a midi note hang and i noticed that there was no longer any usb supplied power to my keyboard. The answer again at this stage was a reboot.
I would ideally not like to reinstall snow leopard as there are quite a few great things in lion which i would miss, but obviously if i can't resolve these issues i don't see that i have any other choice.
Any possible suggestions as to what may be causing these problems will be very much appreciated.
Thanking you in advance
Mark
PS Happy New Year

My experience with Lion was great for a while, it was effortless, everything I had attached still worked with no problems aside from needing occasional drivers. Once Lion 10.7.2 was released, I updated my system and again, no problems. If I recall correctly, 10.7.2 was released in October. Suddenly in December, I began having random software and midi issues all around my system. I do not use Mainstage but I have noticed others have had similar problems with various software and USB midi controllers, and have not seen a fix.
I regularly use Pro Tools 8, Ableton Live 8 and occasionally Reason 5. I also have an M-Audio Axiom 61 and Korg padKontrol attached via USB. After about 2 months of trouble-free operation, Live and Reason would not open and the accompanying software for my padKontrol no longer would either. These apps would just "hang" and I would eventually have to force quit them. In addition, Audio Midi Setup would also hang when attempting to switch to the midi preferences page. Pro Tools still worked, but I could no longer receive midi signals. I also use a wireless USB stick to connect to my home wifi signal and that no longer worked and neither did the accompanying software.
It's possible that there are deeper issues in your system as well as mine and the others having similar problems.
At times, I wonder if there is some kernel errors embedded in my computer. I got my MacPro when Snow Leopard was fairly new and had numerous kernel errors resulting in many applications not functioning. I eventually sorted them out but ran into similar USB related issues with the Snow Leopard 10.6.8 update, so I remained on 10.6.7 until Lion was released.
The only successful fix I've had is switching from Lion back to Snow Leopard 10.6.7 after erasing my entire hard drive. I've tried reinstalling Lion through both upgrading from Snow Leopard and a clean install of 10.7.2 after erasing my hard drive again.
I believe my USB and midi problems stem from kernel errors somewhere but cannot find them (I have used Disk Utility many times). I really liked using Lion but I lose so much functionality and my internet connection so I have determined that I will not be using it. I may try Lion again when 10.7.3 is released but am wary. If anyone has ideas on how to fix these issues, I would love to hear them.

Audigy midi sync tempo is

Hi,
I have audigy zs 2. I'm using Nuendo as midi master and I'm trying to sync other software to its midi clock.
There are 2 issues:
-I cannot seem to be able to transmit midi clock and mtc through the standard audigy midi port
-Using Midi Yoke ports causes the tempo to fluctuate
When setting up Nuendo to send sync messages through the "SB Audigy 2 ZS Midi IO [B800]" port
Other software does not pick up these messages and will not sync.
So it seems this port does not support this.
When using one of the Midi Yoke ports (Virtual midi cable), the following happens.
Pressing play on Nuendo will start a sync with Vaz or Guitarrig. You see they start to play.
However, the tempo on the slave program is erratic and fluctuates like hell. Especially when the slave has a delay synched, it cause audio click due to the constant corrections that need to be made to adjust to the fluctuating speed.
If master tempo is 3 BPM, the slave will have speeds of 30-36, changing some 0 times each second.
I think this latter issue with the fluctuating speed, might be due to the (outdated?) Midi Yoke driver.
But the fact that I can't send midi clock through the standard SB midi port, is worrying me more.
I get the same results when I use another sequencer as master.
It doesn't seem to matter what slave software is used, they all exhibit this erratic tempo behavior.
- So, what causes these tempo fluctuations and what should I do to stabilize that?
- If the standard Audigy midi port IS capable of sending sync messages, then how should I configure it (and where). And, once correctly set up, will my tempo be constant?
If there are no solutions, then I'm sure there are workarounds.
Thanks.
Alex

Alex,
I would say give it time, there may not be many users that have used the particular applications you have, that could help.
If you don't get a response, then it may be worth sending a mail to Customer Support, to log the problem and see if they can advise anything. We don't test every third party application out there, so they may not be able to advise on specific applications you're using.
Cat

Sudden spate of ADSL sync drops - related to new B...

I have had stable 7Mb download internet for six months. This week, I have started having multiple sync losses per day. As a result, my connection speed has dropped to 1Mb and I am at a loss to explain why these drops have started happening. The only conincidental thing is that I moved my service to a combined call/BB package which was supposed to complete yesterday and I am still getting dropouts today. In reality, nothing actually changed as before/afterwards I am still on BB Option 3.
Any ideas/suggestions?

Here's my connection log from 08:56 to 11.00am. I lose count of the drops....
09:59:07  25 Mar
PPP link up (Internet) [86.183.172.73]
09:59:07  25 Mar
PPP CHAP Chap receive success : authentication ok
09:59:07  25 Mar
PPP CHAP Receive challenge (rhost = bras-red2.gi-b)
09:59:07  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 1064 kbit/s; output Power Down: 19.6 dBm, Up: 13.1 dBm; line Attenuation Down: 42.5 dB, Up: 21.5 dB; snr Margin Down: 6.3 dB, Up: 26.3 dB)
09:58:42  25 Mar
xDSL linestate down
09:58:23  25 Mar
xDSL linestate down
09:58:03  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 1039 kbit/s; output Power Down: 19.6 dBm, Up: 13.1 dBm; line Attenuation Down: 43.5 dB, Up: 22.1 dB; snr Margin Down: 6.3 dB, Up: 22.9 dB)
09:57:58  25 Mar
PPP link down (Internet) [86.182.97.26]
09:57:39  25 Mar
xDSL linestate down
09:57:20  25 Mar
xDSL linestate down
09:54:38  25 Mar
PPP link up (Internet) [86.182.97.26]
09:54:38  25 Mar
PPP CHAP Chap receive success : authentication ok
09:54:38  25 Mar
PPP CHAP Receive challenge (rhost = bras-red2.gi-b)
09:54:22  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 952 kbit/s; output Power Down: 19.4 dBm, Up: 13.1 dBm; line Attenuation Down: 43.5 dB, Up: 22.4 dB; snr Margin Down: 6.5 dB, Up: 17.2 dB)
09:54:21  25 Mar
PPP link down (Internet) [86.179.165.163]
09:53:58  25 Mar
xDSL linestate down
09:53:39  25 Mar
xDSL linestate down
09:46:21  25 Mar
PPP link up (Internet) [86.179.165.163]
09:46:21  25 Mar
PPP CHAP Chap receive success : authentication ok
09:46:21  25 Mar
PPP CHAP Receive challenge (rhost = bras-red2.gi-b)
09:46:07  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 1038 kbit/s; output Power Down: 18.9 dBm, Up: 13.0 dBm; line Attenuation Down: 43.0 dB, Up: 21.9 dB; snr Margin Down: 6.3 dB, Up: 23.8 dB)
09:46:02  25 Mar
PPP link down (Internet) [86.182.65.88]
09:45:43  25 Mar
xDSL linestate down
09:45:23  25 Mar
xDSL linestate down
09:43:32  25 Mar
PPP link up (Internet) [86.182.65.88]
09:43:32  25 Mar
PPP CHAP Chap receive success : authentication ok
09:43:32  25 Mar
PPP CHAP Receive challenge (rhost = bras-red2.gi-b)
09:43:16  25 Mar
PPP link down (Internet) [86.182.65.88]
09:43:14  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 945 kbit/s; output Power Down: 19.7 dBm, Up: 13.1 dBm; line Attenuation Down: 43.5 dB, Up: 22.5 dB; snr Margin Down: 6.5 dB, Up: 13.8 dB)
09:42:50  25 Mar
xDSL linestate down
09:42:31  25 Mar
xDSL linestate down
09:35:16  25 Mar
PPP link up (Internet) [86.182.65.88]
09:35:16  25 Mar
PPP CHAP Chap receive success : authentication ok
09:35:16  25 Mar
PPP CHAP Receive challenge (rhost = bras-red2.gi-b)
09:35:12  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 945 kbit/s; output Power Down: 19.7 dBm, Up: 12.8 dBm; line Attenuation Down: 43.5 dB, Up: 22.3 dB; snr Margin Down: 6.4 dB, Up: 14.6 dB)
09:34:52  25 Mar
xDSL linestate down
09:34:38  25 Mar
PPP link down (Internet) [86.180.169.209]
09:34:36  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 1044 kbit/s; output Power Down: 19.6 dBm, Up: 12.9 dBm; line Attenuation Down: 42.5 dB, Up: 21.6 dB; snr Margin Down: 6.3 dB, Up: 17.0 dB)
09:34:12  25 Mar
xDSL linestate down
09:33:53  25 Mar
xDSL linestate down
09:30:48  25 Mar
PPP link up (Internet) [86.180.169.209]
09:30:48  25 Mar
PPP CHAP Chap receive success : authentication ok
09:30:48  25 Mar
PPP CHAP Receive challenge (rhost = bras-red2.gi-b)
09:30:29  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 644 kbit/s; output Power Down: 20.1 dBm, Up: 12.9 dBm; line Attenuation Down: 43.5 dB, Up: 22.4 dB; snr Margin Down: 6.4 dB, Up: 12.3 dB)
09:30:09  25 Mar
xDSL linestate down
09:29:53  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 998 kbit/s; output Power Down: 19.6 dBm, Up: 12.8 dBm; line Attenuation Down: 42.5 dB, Up: 21.6 dB; snr Margin Down: 6.5 dB, Up: 16.6 dB)
09:29:49  25 Mar
PPP link down (Internet) [81.159.142.243]
09:29:29  25 Mar
xDSL linestate down
09:29:10  25 Mar
xDSL linestate down
09:22:39  25 Mar
PPP link up (Internet) [81.159.142.243]
09:22:39  25 Mar
PPP CHAP Chap receive success : authentication ok
09:22:39  25 Mar
PPP CHAP Receive challenge (rhost = bras-red2.gi-b)
09:22:27  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 237 kbit/s; output Power Down: 19.8 dBm, Up: 10.3 dBm; line Attenuation Down: 43.5 dB, Up: 22.4 dB; snr Margin Down: 7.5 dB, Up: 16.3 dB)
09:22:22  25 Mar
PPP link down (Internet) [81.159.142.32]
09:22:04  25 Mar
xDSL linestate down
09:21:44  25 Mar
xDSL linestate down
09:18:03  25 Mar
PPP link up (Internet) [81.159.142.32]
09:18:03  25 Mar
PPP CHAP Chap receive success : authentication ok
09:18:02  25 Mar
PPP CHAP Receive challenge (rhost = bras-red2.gi-b)
09:17:50  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 291 kbit/s; output Power Down: 19.8 dBm, Up: 10.3 dBm; line Attenuation Down: 43.5 dB, Up: 22.3 dB; snr Margin Down: 7.1 dB, Up: 15.4 dB)
09:17:45  25 Mar
PPP link down (Internet) [86.182.97.36]
09:17:26  25 Mar
xDSL linestate down
09:17:07  25 Mar
xDSL linestate down
09:13:06  25 Mar
PPP link up (Internet) [86.182.97.36]
09:13:05  25 Mar
PPP CHAP Chap receive success : authentication ok
09:13:05  25 Mar
PPP CHAP Receive challenge (rhost = bras-red2.gi-b)
09:12:54  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 484 kbit/s; output Power Down: 19.8 dBm, Up: 10.3 dBm; line Attenuation Down: 43.5 dB, Up: 22.3 dB; snr Margin Down: 7.1 dB, Up: 15.9 dB)
09:12:49  25 Mar
PPP link down (Internet) [86.173.174.114]
09:12:31  25 Mar
xDSL linestate down
09:12:11  25 Mar
xDSL linestate down
09:11:39  25 Mar
PPP link up (Internet) [86.173.174.114]
09:11:39  25 Mar
PPP CHAP Chap receive success : authentication ok
09:11:39  25 Mar
PPP CHAP Receive challenge (rhost = bras-red2.gi-b)
09:11:26  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 1056 kbit/s; output Power Down: 19.5 dBm, Up: 13.1 dBm; line Attenuation Down: 42.5 dB, Up: 21.6 dB; snr Margin Down: 6.5 dB, Up: 25.8 dB)
09:11:22  25 Mar
PPP link down (Internet) [86.178.13.150]
09:11:02  25 Mar
xDSL linestate down
09:10:43  25 Mar
xDSL linestate down
09:09:53  25 Mar
PPP link up (Internet) [86.178.13.150]
09:09:52  25 Mar
PPP CHAP Chap receive success : authentication ok
09:09:52  25 Mar
PPP CHAP Receive challenge (rhost = bras-red2.gi-b)
09:09:49  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 1005 kbit/s; output Power Down: 19.6 dBm, Up: 13.1 dBm; line Attenuation Down: 43.5 dB, Up: 22.2 dB; snr Margin Down: 6.4 dB, Up: 16.9 dB)
09:09:29  25 Mar
xDSL linestate down
09:09:15  25 Mar
PPP link down (Internet) [86.183.24.247]
09:09:13  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 1057 kbit/s; output Power Down: 19.4 dBm, Up: 13.1 dBm; line Attenuation Down: 42.5 dB, Up: 21.6 dB; snr Margin Down: 6.4 dB, Up: 25.5 dB)
09:08:48  25 Mar
xDSL linestate down
09:08:29  25 Mar
xDSL linestate down
09:02:45  25 Mar
PPP link up (Internet) [86.183.24.247]
09:02:45  25 Mar
PPP CHAP Chap receive success : authentication ok
09:02:45  25 Mar
PPP CHAP Receive challenge (rhost = bras-red2.gi-b)
09:02:43  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 1040 kbit/s; output Power Down: 19.5 dBm, Up: 12.9 dBm; line Attenuation Down: 42.5 dB, Up: 21.6 dB; snr Margin Down: 6.5 dB, Up: 25.9 dB)
09:02:24  25 Mar
xDSL linestate down
09:02:08  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 1035 kbit/s; output Power Down: 19.7 dBm, Up: 12.9 dBm; line Attenuation Down: 42.5 dB, Up: 21.6 dB; snr Margin Down: 6.3 dB, Up: 18.9 dB)
09:02:08  25 Mar
PPP link down (Internet) [86.183.24.69]
09:01:44  25 Mar
xDSL linestate down
09:01:25  25 Mar
xDSL linestate down
08:56:18  25 Mar
PPP link up (Internet) [86.183.24.69]
08:56:18  25 Mar
PPP CHAP Chap receive success : authentication ok
08:56:18  25 Mar
PPP CHAP Receive challenge (rhost = bras-red2.gi-b)
08:56:02  25 Mar
xDSL linestate up (ITU-T G.992.5; downstream: 1144 kbit/s, upstream: 344 kbit/s; output Power Down: 19.7 dBm, Up: 10.3 dBm; line Attenuation Down: 42.5 dB, Up: 21.6 dB; snr Margin Down: 8.5 dB, Up: 14.9 dB)
08:56:01  25 Mar
PPP link down (Internet) [86.183.24.117]

Logic Sputtering, CPU spiking horribly for no apparent reason, gives MIDI sync error even though the computer is set at the same sample rate.

It's literally making it impossible for me to produce anything, after what seems an arbitrary amount of time in Logic my audio will begin to distort and I will get errors stating that my MIDI sample rates don't match, but they DO and it will spit out some seemingly random sample rate from nowhere. My CPU usage will spike and even my cursor will jitter across the screen until it stops stuttering. The audio problem seems to only be caused by Logic but will sometimes continue to occur in other applications after Logic is closed.
How on earth do I fix this? It's making it impossible for me to work on remixes that I have to have finished soon, I have deadlines and I simply can't work in these conditions... the audio doesn't work.

That sample rate error comes up when Logic gets out of sync internally, you will sometimes also see a MIDI/Audio sync error. MIDI timing is taken from the audio driver/sample rate, it's what enables MIDI to stay in sync with audio, when the audio/MIDI engines get out of whack these are the kind of errors that pop up. (there doesn't have to be any MIDI in the song) Can be caused by bad drivers, interference from another running program, synchronization settings, bad or incompatible plugins!

External Synth Midi Sync

Hi im having trouble doing this. i have followed the very helpful sflogicninja's tutorials: http://www.youtube.com/watch?v=iS_YS-waARU&feature=channel. dispite his help i am still yet to successfully set up my microkorg so midi is synced correctly (am i right in assuming i should be able to change the korgs programs ect from within logic?) i have a fast track pro sound card and both midi i/o are plugged in via 5 pin midi cables. and the microkorg works fine in controlling other software synth's within logic...any help and advice on what i may be doing wrong here would be greatly appriciated! thanks lolly

do you actually mean "sync"? that would imply that you are trying to make 2 or more MIDI sequencers to play together. Are you just trying to have the ability to send MIDI messages to the korg from logic? if so, and you are cabled correctly, you need to set the MIDI channels to match in logic and the korg. Look to see what midi channel and port the logic MIDI channel strip you have selected is set to. Make sure that the Korg is on the right port and is assigned to the correct channel. Then if you look in the inspector you should see a program change check box.

MIDI sync dropping btw Logic8 & Doepfer MAQ 16/3

Similar Messages

Maybe you are looking for