Midi sync my Fantom x8 with logic

Ok...hello everyone, ive been breaking my head on this one....I have my fantom connected to logic via Mbox2(midi out on the fantom is going to midi in on the mbox and midi out of the mbox is going to midi in on the fantom) and I can record MIDI coming in but when i play it back it doesnt trigger the patches on the fantom, it doesnt trigger anything...I want to be able to edit and sequence what I play on my fantom in logic....Can anyone help?

Do you have it set up for reception. What channel is it set to
recieve on? Do you have an external instrument object set up?

Similar Messages

I can't sync my Baby HUI with logic

I recently purchased a Mackie Baby HUI control surface to use with Logic Express 9.
First, just to clear up a few things. I have downloaded the most recent Logic update 9.1.7. I have the most current drivers for my MIDI interface.
So, i've followed the instructions in the Logic manual about a dozen times right now for setting up a Baby HUI. When i do this all of the buttons and pots function as they are supposed to; pans, sends, transport, master select, solo, mute. They all work. The only thing that doesn't work are the faders. If i start Logic with all of the faders in the up position it will move them down to the bottom on its own. However, if i move the faders there is no corresponding fader movement within Logic. If i have volume automation written into the track the faders will not follow the automation.
I have checked the Baby HUI in another software DAW and the faders work great (although this other DAW doesn't have support as they are missing the access to the transport and master section buttons.
What can i do within Logic to get it to recognize the fader movement? I've already reinstalled Logic 3 times and reset the computer today and none of that seems to help.
Misha

Sure you can. Do you have 'sync calendars' checked in itunes when your device is plugged in?

Trouble Syncing Roland TR-606 with Logic Pro

Hello.
I had this working before and I dont know what went wrong.
The setup is like this Logic sending MIDI Clock > Midisport Interface > Kenton Pro Solo (set to send Sync24 out of the 'Through' port > Roland 606's MIDI sync input.
When I start and stop from Logic the 606 starts and stops accordingly. Also, when I change the tempo from within Logic the tempo on the 606 also changes HOWEVER the speed that the 606 is running at is always faster than the metronome in logic - It doesn't sync. Is this a problem with the 606?
What am I doing wrong. Would be very grateful for any advice.
Thanks.

More info: From the Logic 'MIDI Sync preferences' I have set it to send MIDI Clock and from the 'MIDI Sync project settings' I am sending it to the correct port on my interface. The MIDI clock is received by the Roland however fails to sync with it properly..

Fantom X6 with Logic Studio

I have my Roland fantom x6 synth hooked to a midi interface, how do I access my sound inside the synth? Do I do this through logic by a patch script? How does this work?
What is the easiest way?

Nope - nothing to do with the Audio MIDI Setup utility.
Assuming your Fantom is connected via MIDI, you need to tell Logic it exists.
Load your default template, open the enivonment window, select a new environment layer, New -> Multiinstrument.
Name is Fantom, enable all 16 parts by clicking on their little dashes on the object, and set it's parameters to the MIDI port the Fantom is connected on. Uncheck the icon checkbox. You might need to select the correct bank change format by double clicking on the multi and choosing the appropriate format (check your manual).
You can also input patch names here, but I'd leave that for now.
Close the environment window.
Create a new arrange track, control-click on the track and choose Reassign track object -> and choose the "Fantom 1" which is MIDI channel 1 on your Fantom.
Now notes you play are echoed out to the Fantom on channel 1, and you can sequence it. You can easily create tracks for the other MIDI channels if necessary in the same way.
Once you've done this setup work, save it as your default template so your custom configuration is always available when you start a new song.
Basically, all we are doing is creating a little virtual Fantom and telling Logic which MIDI port it's on, so we can assign it to arrange tracks and sequence it.

How can I midi Roland TD-9 KX2 with Logic EXpress 9?

Hello everyone,
Here is my setup:
I have the Roland TD-9 KX2 connected to M-Audio MIDI In & Out and Audio 1/4" In & Out, Then connected to Logic 9 thru USB on my MacBook Pro.
I create a new track and select Audio and then I create another track and this time I choose External.
When I hit record, the audio track shows waveform recorded but the External/MIDI does not.
Note: When I'm recording, I can see the MIDI notes (look like little blocks), but when I stop recording, They disappear...
Can someone please tell me how I can execute this or of if anyone has a tutorial that they can share link of it.
Thanks in advance,

I had a simular problem. Only I had Ver 9 and needed 9.1.4 to be compatable with Lion. I had installed Lion and didn't think I would have any problem with Apple apps. Not the case with Logic Express. Here is what I did.
First: I removed all versions that were previously installed on my Mac Pro. Then using the latest (9.0) I reinstalled. Important. DO NOT TRY TO OPEN APP. Next: down load (free) version 9.1.4 and install. Once everything is closed and disks are removed. Start Logic Express 9.1.4 and guess what...if just works.
I believe some of the residual files were residing in my library some place and I didn't see them. Before I reinstalled I was recieving the message that I didn't have a qualifing version of Logic Express. This is when I had two versions 9.0.0 and 9.0.1. Someone said to remove the older version, I didn and nothing.
Do what I say above and you will be rewarded.
Good Luck

Sync Rebirth 2.0 with Logic Pro 7

I'm running Logic Pro 7 on a Powerbook G4 with OS 10.3.9. I just downloaded the now free Rebirth 2.0, which only runs in OS 9. Is there any way to slave Rebirth to Logic? Any way to sync midi and audio between OS 9 and OSX?
Hope so...
Any help would be great.

nope

Syncing Edirol UA-25 with Logic

I am trying to use an edirol UA-25 to capture guitar audio but I am confused about a couple things:
1. How can I hear what I recorded in playback? When I record I can hear the guitar in my headphones but during playback I can't hear anything until I bounce the tracks to mp3.
2. How do I set metronome settings so that I can hear the metronome in the headphones?
3. How can I hear the effects I add (reverb, distortion ect.) in the headphones while I am recording? All I hear is the guitar amplified but with no effects added

Yes my computer reads it, I am having trouble interfacing between system instruments and real audio recordings

Syncing roland 303 with Logic Audio 6.1

I am trying to sync my roland tb303 with Logic 6.1 in OS9. I have turned on the midi clock under song settings/midi and am using a midi/sync converter between my mt4 midi box & 303 but the 303 does not run. Any suggestions ??

OK. The sync output dialog is under file/song settings/synchronization. Select the MIDI tab (looks like a file folder, NOT the little icon at the top)Then you can check the "transmit MIDI clock destination 1" box. Usually you can get away with selecting "All" on the pull down menu and not worrying about which port goes where, but some older MIDI gear freaks out if it sees MIDI clock. If you have to just select the proper port from the list. If you have the MIDI out from the computer to the MIDI in on your sync box you should be good to go!

Which 61 key midi keyboards work with Logic Pro X (10)? M-Audio, Novation, Akai, Roland???

Hi. I'm new to this community but would really appreciate some help.
I'm struggling to find a 61 key midi keyboard which works properly with Logic Pro X.
I was looking into getting either the M-Audio Axiom 61 or Novation Impulse 61 but all I can find on google etc. is people saying they don't work properly.
Has anybody got a 61 key which works seamlessly with Pro X?
Any help would be much appreciated.
Thanks.

To "The Art Of Sound"
Hi. I doing next.
1. I create new project
2. I select Yamaha Grand Piano
3. I play something in "live" mode. All is ok
4. I play something in "Rec" mode. All is ok
5. I record second track with the same instrument, with Yamaha Grand Piano. All is ok
6. I record third track with Yamaha Grand Piano. All is ok again.
7. Now I muting first or second track and... third track plays wrong notes! I unmute first track, but third track still to play wrong notes! Why???
Ok. I continue experiment with created project. I have three Yamaha grand Piano tracks and I creating new software instrument and assing Hovering Machine to it. I try to play in "live" mode something. And I get interesting effect. If I play short notes (sixteens, for example), I can play for one minute without problem. And Logic Pro X starts to play wrong notes after this time delay.
If I start to press chord notes without breaking, Logic Pro X plays for 15-30 secounds normally and starts to play wrong notes them.
Well. I turn off all plugins and effects from instruments. But Logic Pro X countinues to play wrong notes!
I experimented with NI Kontakt 5. Kontakt plays wrong notes!
I experimented with LUSH-101 plugin and minimoog. This two instruments play correct notes always!!! WHY????
Why some instruments play wrong notes and other instruments play correct notes in the same project?
I wrote wrong in my previous post. I got this problem with Logic Pro X 10.0.3 update.
Actually I have serious problem now. I opened projects created in Logic Pro X early and I have this problem in ALL projects. This's commercial projects and my partners asked me already about release date... What must I answer?

Best drum loops for use with Logic? Ease of use, usability, etc.

Hi,
I have BFD2 but find it slow to load and sometimes clumsy auditioning loops within Logic. I love the Apple Loops library but I wondered if people are importing MIDI drum files for use with Logic. Do all drum files use the same MIDI mapping? If I drop a BFD2 loop into a Logic drum virtual instrument will it work? I bought a few packs from Groove Monkee but have yet to use them with Logic. I only use them within BFD2.
I'm basically looking for a seamless way to stay within Logic to improve my workflow. It's taken me days sometimes to get a drum track right by going back and forth with BFD2. Is there a concept I'm missing that would make it easier?
Thanks

try Stylus RMX by Spectrasonics. http://www.youtube.com/watch?v=FlgP1q1HCj4

Sync microKorg with Logic Express 9

I'm trying to sync the arpeggiator of my microKorg XL with Logic Express 9, using Logic as the master. I seem to have almost done it, in that tempo changes in Logic change the microKorg's tempo. However, I can only hear the microKorg whilst I'm either recording or playing back - I can't hear it if I press a few keys.
I think the problem lies in that I have "Local off" set in accordance with the microKorg manual. The manual says I should also "turn on echo back" on the computer - but I don't know how to do this in Logic Express.
Grateful for advice.

When you set "Local Off" in any synth with MIDI capability, it disconnects synth's keyboard from its sound engine. Switch it back ON to be able to play sounds again using microKorg's keyboard. There is no point to disable the keyboard in your case anyways. Unless of course, you want to avoid midi-loop (but that's only when you have both MIDI IN and MIDI OUT wired to Logic).

Sync problems with Logic ????

I use adat hd24's with my logic setup with a BRC and motu midi express. I'm running smpte to my midi express from the BRC and Logic reads time code from the midi express.. I have music tracks in Logic and I'm recording vocals on the BRC. Should I run MTC or SMPTE to the midi express for logic to sync correctly. I've been having problems with the smpte. It seems logic will go out of sync. This doesn't happen over a short time period. I can run the song thru from start to finish 7 or 8 times but at some point Logic just doesn't want to sync anymore. Sometimes when I start back at the beginning of the song the sync will be fine but if I stop and start anywhere after the beginning the sync will be off. Go figure!!! What's the best and safest way to sync Logic with my setup of HD24,BRC and midi express with L7. The BRC generates MTC and SMPTE.

you need a word clock connection between the brc and the computer/logic. do you have that?

Fantom x 8 with logic?

hello i have been wondering if it is possible to use the roland fantom x 8 with logic pro through midi controls and if i would be able to get sounds out of the phantom on to my mac? i have never used midi before only usb as a controller. any help would be great!

Hi,
You can use the Fantom in different ways:
1st: Send Midi Data to Logic (record Midi). By doing so, you can trigger one of the many fine software instruments of Logic.
2nd: Record the sounds of Fantom with Logic. This doesn't function with midi, but with an audio interface, which you should buy if you don't have one. (There are many interfaces that support both midi and audio)
3rd: Play back the sounds of the Fantom by sending midi data from Logic to your Fantom with an external midi track in Logic.
However, get yourself an audio interface. You'll need one anyway if you work with Logic.
Fox

Midi sync issues with midi keyboard

I am having issues with my midi keyboard being synced with logic pro. I have it connected with midi and audio. When I press play on logic the keyboard sounds will play but it sounds like it is a split second faster than logic. Anyone know any fixes for this issue?

dano07 wrote:
I am having issues with my midi keyboard being synced with logic pro. I have it connected with midi and audio. When I press play on logic the keyboard sounds will play but it sounds like it is a split second faster than logic. Anyone know any fixes for this issue?
There's several possibilities.
1. It could be plugin related, do you have any latency inducing plugins on the master bus or as inserts on and of the tracks. Maybe I should ask what plugins you're using?
2. In Logic's preferences/audio-Devices tab, is the "Recording Delay" slider set to zero? While your there go to the "General" tab, is the Plugin latency compensation set to "audio and software instrument tracks"?
3. If you have Low Latency mode enabled, disable it.

Please take a quick look at this: Midi Problem with Logic 8.0.2

Hello, I am trying to connect up my Roland FP3 Keyboard with Logic 8.0.2. I am using the following MIDI IN/OUT to USB device:
MUSIC STORE Midi Port 1x1 USB
http://www.musicstore.de/de_DE/EUR/-/art-PCM0006795-000
In the Audio Midi Setup in Mac OS X 10.5.5, the Midi device calls itself WORLDE MIDI PORT and is automatically recognized. However, when I click on "Test Setup", nothing happens. This is not the first time that i have setup such a device and i recall that with other MIDI-USB devices that the computer plays some kind of sound to confirm that the MIDI-USB device is working.
More importantly, when i open up Logic 8.0.2, the transport bar displays "No In", "No Out". This is very confusing seeing as that the device is recognized in the Audio/Midi Setup. It is unlikely that the device is broken, because I've now gone back to the store where i bought it and replaced the first device with an identical second device - and am now having the same problem. The staff at this music store say that the Midi-USB device should automatically display, for example, C-sharp 4, in the transport bar without any additional tinkering. I have a feeling though that there is some kind of button that i have not pressed (or HAVE pressed that i shouldn't have pressed) and as a result can't play music in from my keyboard into my computer.
I really appreciate anyone who takes the time to give me a helpful pointer here. As you can imagine this is quite frustrating. Thank you very much in advance!
Peter

peterland1 wrote:
More importantly, when i open up Logic 8.0.2, the transport bar displays "No In", "No Out". This is very confusing seeing as that the device is recognized in the Audio/Midi Setup.
"No in No out" simply means there is no MIDI coming in or going out +at that moment+. If you strike keys and move controllers and it still says no in no out, then you may have a problem. Is that the case? Have you actually touched the keys...?
regards, Erik.

Midi sync my Fantom x8 with logic

Similar Messages

Maybe you are looking for