Midi tracks changing pitch when un frozen

Whats up, is this a known problem and I am unaware. I had every midi track on 6 songs do the same thing upon unfreezing. All went up a half step sharp. Steve Cooley

Aah, yes of course! That would be why...
Thanks for the help.

Similar Messages

How do I stop my audio from changing pitch when moving it to another track?

I read up a bit on the "Flex" settings, however, I can't seem to turn it completely off. The flex button is not engaged, however, when I move audio from one track to another, the pitch changes. How do I stop this completely?

You have to disable it on the tracks themselves too. The 'main' flex button only turns on and off Flex view, and not flex itself.
Flex view on, track flexed
Flex view off, track flexed (or not?)
Flex view on, track not flexed

How to track changes incrmd_order when employee responsible group is change

Hi experts
crmd_order , nj supportrequest , when the employee responsible group is changed in need to trigger email to newly entered emp responsible group after saving. i need to know where this changes of service employee group is captured.
how to send emails to service emp group with logo. kindly help

Hi Surendra,
You can create an implementation of CRMD_ORDERADM_H badi and check if the is_orderadm_h and cs_orderadm_h values are same or different, and trigger the email logic depending upon the condition
Prerna

Multiple MIDI tracks to one instrument?

The plugin is Ultrabeat.
I like putting the kick onto one MIDI track
the snare into another MIDI track,
hats on another, etc....
Problem is, all of the MIDI tracks that route to the Ultrabeat
are the actual instrument track that has the plugin inserted onto it.
So MUTING one track mutes all the audio coming out of
the Ultrabeat Instrument track.
An attempt at a workaround is: create a Multi-instrument
in the Environment, and connect it to the Ultrabeat.
But then MUTING the MIDI tracks doesn't do anything.
The MIDI tracks play even when MUTED.
So I'm guessing Region Muting is the way we do it?
Selecting individual regions for muting and solo-ing
instead of muting and soloing the track ?
So..the MUTE button on a MIDI track is there for...NO REASON.
It's just a button that doesn't do anything.
Well.. this MIDI track has muted and non-muted regions on it.
I guess I'll need to remember which ones are muted and which
are not ?
This couldn't possibly have been something that was thought over
and planned.
Nobody in their right mind would design it this way on purpose.
A solution would be to allow MIDI tracks to be MUTED using the 'M' button

Are you talking about MIDI track on external MIDI?
your question seems to be related with Instrument tracks...
there many Muting possibilities in Logic...
I suggest to read the manual serch for "mute track"
As you can see in the manual there are tons of pages and paragraphs about MUTE function in Logic Pro... so I cannot explain all the way to MUTE a Midi or Audio
I can only say that Instruments tracks are not the same as External MIDI track device... *but Muting Instrument track is very similar as Audio and Midi mixed together functions*
'cause the Instruments channels strips are AUDIO CHANNELs STRIPs!
Maybe the following pictures can help
Try to change setting with the one shown below
CPU-savings is not the correct therm and maybe this is caused of misunderstanding...
this set allow you to individually mute the duplicate tracks...
_+The "M" button that you are metioned in your post will works as you need.+_
I'm trying to replay to the O.P question
multiple MIDI tracks to one instrument?
if you need to mute individually tracks of a single instrument the last pictures shows the best setting to achieve the result that you are looking for.
G

Tracked changes in .icap files

My colleagues and I switched from using .icma to using .icap files, per our designer's request. The obective is to each be able to make changes and see one another's changes in a file, and then save the file as an idap file for our designer. We were able to see each other's changes and work on the same files (taking turns) when we used .icma. Now, however, we can't see each other's tracked changes, even when we "Forward for InCopy" and when we "Forward for InCopy and email." Do you know why this is?

Everything looks fine here. I sent you a screen shot of the story editor so you could see for yourself.
Now, let's try and figure out what's wrong. Are you all fully patched to 6.0.5?
Bob

Flex pitch (Time) needs midi track import function

Flex pitch (Time) needs midi track import function

HI it's me again ( under my studio name).. I don't use Garage Band. I use Logic x. so don't know why you'd suggest doing away with another program when I have no use for Garage Band.
I think it ended up working only because it was a glitch.... when I exited the program and came back to it, it started working. The only thing that didn't appear was the pitch correction on the left hand side of the sound editor.. the slider button where you can go up to 100%...
but at least it worked. This Apple operating system always has bugs .. but gllitching on my projects doesn't make me a happy camper.
They don't even offer support for it. unless you pay through the roof.
Anyway.. it showed up... not sure how it did, but rebooted my computer and miraculously it was there.

How to track changes when a contact updates contacts address section?

I'm creating a workflow to create an integration event when a contact updates its contacts address section (number/street, address2, address3 city, state, zip).
Record Type: Contact
Trigger Event: When Modified record saved
Workflow Rule Condition: None
Action Type: Integration Event
When I go to configure the workflow action, I don't see the address on the track changes list. How do I specifiy the address section to be tracked when it's modified?
Thanks

The best way would be to create a trigger in the database that would update the history table whenever the data was changed. The next best would be to use a stored procedure. I would not try to do this with server side scripting.

How to change the key of a MIDI track

There has to be an easy answer for this.
I have a Midi drum loop that I am using. I have changed the instrument so instead of the MIDI notes playing through a drum synth it is using one of logic's piano software instruments.
What I am trying to do is change the KEY of this loop. It seems to only play in C. If I go to the piano roll, copy all the notes of the loop and move the notes up or down, I was thinking I should be able to alter the key/chord that the loop is playing. However, no matter what I do, the loop still seems to be in C.
What is going on? And what can I do to easily change the key of this loop?

How is Space Designer keeping the MIDI track in the same key of C
I have no idea. I would normally think that such a thing is not possible.
What is the instrument? What happens if you create a new track, and load this instrument, and create a new midi region, and load SD? Same problem? What about if you do this in a new project? Same problem?

Why do Track Changes no longer show up when document is saved as .doc?

I've used iWork for many years to collaborate with people in numerous other organizations who almost all use MS Office and are mostly on Windows. This year, the documents I send them, supposedly saved in Office formats, cause freezes, don't open, and even when they do, don't show Track Changes any more. That makes collaboration on document creation almost impossible. Workarounds? Solutions?
Does anyone know if Apple is going to do a real update to iWork to bring it in line with current MS Office versions? If not, I'm going to have to give up on it and that will take endless work since I'm going to have to create new templates and sample docs from scratch. Anything I convert and import from iWork causes problems and the Open Office/ Libre Office suites don't even accept iWork docs at all. I hate to go back to using Microsoft products.

I was still on Leopard when it started this spring (I suspect it started with updates others did for MS Office). I never used Snow Leopard or Lion on my desktop. Documents sent to collaborators or cllients started not opening or freezing or being Read Only through I had not sent Read Only docs. I hoped the upgrade to iWork that was available once I bought Mountain Lion would help and it did in terms of documents opening but not for editing.
This happens with Pages and Numbers and I'm hearing it from others, and hearing they are also having this problem with Keynote. I'm about to collaborate on a presentation for a third party webinar and suspect it won't be worth developing it in Keynote from what I'm hearing. The problems have by now happened with dozens of collaborators in different organizations, countries, etc., including people with high level tech skills, so it's definitely at my end.
I have tried on another computer (my laptop, which had the problem during Snow Leopard and still does under Mountain Lion). as well as other accounts; that doesn't make a difference.
Throughout I've run whatever the latest iWork version was, but the upgrades have been minimal. It appears Apple plans to let iWork die.

Office for Mac 2011: Tips for speeding up Word when using tracked changes and comments?

I run a fresh installation of Office for Mac 2011 (v. 14.4.1) on a brand new Macbook Pro 13" Retina 2.4GHz with 16GB RAM running 10.9.2. The Office package is fully up-to-date.
I mainly use Word and find that it is extremely slow when I track changes. Documents need not be particularly large - even in a 30-page document after a few pages of tracks typing becomes a pain, in particular in comment bubbles where the text shows up letter-by-letter and only finish several seconds after I've stopped typing. Other programs run at the same time do not suffer from this horrible lag.
I have searched and seen that this is not uncommon so it appears that Microsoft's coders are not particularly well versed in coding for Mac.
My question is if other users have found ways to improve the situation, for instance by trashing plists or something like that? This is really driving me crazy
Many TIA
Philip

You might try looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2)

Random volume change on midi track during

Hey guys! For some reason a random midi track will just all of a sudden increase to max on volume while play back and I haven't got any automation on it at all. I have tried unplugging the midi and in again but still won't solve the problem. Anyone know how to fix this??
I have been searching for this answer and still haven't found anything.
Is this a bug in logic pro? This used to happen with my Logic 8 and I just recently upgraded to Pro thinking this won't happen but it's doing my head in!!!
Please please help!!

OK, you say all sorts of things, but frankly none of it is very clear or concise. What is needed here is evidence. So first select any track on which this happens, select the regions of that track, open the Event list (key: E) and make a screenshot of that event list. This to exclude that you already have recorded these volume control messages. If you have and you don't want them, click on the Notes button top of the event list, this hides all notes, making it easier to select all volume events and delete those.
Second, when it starts to happen, hit cmd-8, an Environment window opens. In this window, go to the dropdown top left and choose Click & Ports. In that layer/window you'll see a MIDI monitor object. Are there any events shown in it? Click in it to clear it, and see if cc 7 (volume) control messages start coming in. They move you faders.
You most likely have a MIDI controller with a wobbly slider or panpot or other hardware thingy that is sending out those Volume control messages aka CC 7.
"unplugging and in again" I take it means you have unplugged it and immediately replugged it, as a sort of "reset"? That will not help in this case, it would help if you'd unplugged it and observed what (didn't) happen when you did. I bet the problem clears up then, again pointing to the hardware as the culprit.
You can do that still: unplug your MIDI equipment, and see if it still happens. My bet: it won't.
If the hardware is to blame, the best solution is to get better hardware, or get it fixed, or filter out the volume messages in the environment, or in the prefs.

Why do I lose my midi tracks when exporting a song to iTunes from GarageBand?

I have been using GarageBand for many years and have never had any real problems--it has always delivered. Recently, though, I finished a track that I wanted to share online, so I tried to get it into MP3 format via iTunes. After listening to it in iTunes, I noticed that none of the midi tracks were there. I tried exporting it again at a higher quality, then in a different format (AAC), and every time, I ended up with a track lacking all midi parts. Does anyone know why that would be or, more importantly, how to fix this problem? Many thanks!

I received the following response from email support:
The reason you saw an amount higher than what was actually in your account may be due to your account information not being updated. This can happen, for example, when you use multiple computers to make iTunes Store purchases. You can refresh your account information at any time, which will in turn update the store credit amount iTunes displays next to your account name. To do this, sign out of the iTunes Store and then sign in again.
It seems that the balance itunes is originally reporting should not be there and it is refreshed (and removed) once the new balance is added.
It's kind of unfortunate that the itunes store can't properly track an account balance (especially since I only use 1 computer for my account), but that's your answer. Hopefully Apple will get around to correcting this in the future, as it's pretty frustrating.
Windows XP

InCopy CC crashes when using track changes

Hi
We have had a lot of problems with InCopy chrasing.
We are using the package system.
It seems to happen when clients are using Track changes, they open the file and if i opens in Story mode it just spins and won't works. If ou open it in Layout mode it seems fine but as soon as you go to Story mode it spins again.
If the track changes are accepted the package will work fine again.
Does Adobe have any updates for this it's becoming very frustating and clients don't want to use InCopy.
Thanks
Louise

I don't think there is anything specific in the upgrade that addresses tracked changes, sorry.
If you need to keep a version of the INDD file with all the tracked changes (before you accept them, to reduce problems), then I'd suggest you make a whole new version of the project. Archive the old one with all the tracked changes intact, and wipe out the tracking markup by accepting all changes in the new doc.
1. The ID user makes sure all stories are checked in and up to date (easiest via the Assignments panel)
2. They unlink all the InCopy stories ... select them in the Assignments panel and click the Unlink icon at the bottom (trash can)
3. Do a Save As to the InDesign file into a new folder with a new name ("v2" appended, for example, or "_changes-accepted").
4. In the new file, re-export all the stories to InCopy format, saving them to a new subfolder.
5. Check out all the stories at once via the Assignments panel
6. Go to the Type menu and choose Track Changes > Accept All Changes > In This Document
7. Archive the old INDD file with its linked InCopy files (that have the changes)
8. Tell users to continue working on the new INDD file.
Alternatively, InCopy users can export each story showing the tracked change markup to PDF, archiving that for auditors, before accepting all changes.
AM

When I edit a midi track and dig on a note, I can no longer hear it. Has something been turned off?

When I edit a midi track and dig on a note, I can no longer hear it. Has something been turned off?

If "digging" is "clicking" and if you mean to ask if anyone can hazard a guess as to what is going on in your particular version of Logic, then I'd say this little button
is not green anymore.

I've imported some midi tracks, used the mixer to set pan, volume etc, but when I stop playback and restart it sets every midi track back to '0'. I've been using LE for years, this is a new one, any ideas?

I've imported some midi tracks, used the mixer to set pan, volume etc, but when I stop playback and restart it sets every midi track back to '0'. I've been using LE for years, this is a new one, any ideas?

Hi,
that's because Logic reads the volume information out of the imported MIDI tracks and sets the volume fader according to this information. The MIDI information overrides volume settings you have done, so you have to identify the MIDI events that contain volume (or expression or pan or whatever) information and delete them. You can use the event list editor for this.
Fox

Midi tracks changing pitch when un frozen

Similar Messages

Maybe you are looking for